- Pharo-dev - lists.pharo.org

Re: [Pharo-dev] Adding a new catalog entry

by Sven Van Caekenberghe

On 16 Mar 2014, at 22:44, Nicolas Cellier <nicolas.cellier.aka.nice(a)gmail.com> wrote: > Or do you have a different POV, like only Pharo3.0 stuff should go to MetaRepoForPharo3.0, and the ConfigurationOf... should be expunged from any other dialect/version ? MetaRepoForPharo3 should only contain configurations that load/work without problems in Pharo 3 and that are/will be supported. Of course, if a configuration contains supports for other platforms as well, that is OK.

March 16, 2014

Re: [Pharo-dev] Adding a new catalog entry

by Nicolas Cellier

2014-03-16 22:27 GMT+01:00 Pharo4Stef <pharo4Stef(a)free.fr>: > >> >> - I can give you access but I need your account name >> > > Thanks Torsten, I have already access > > >> - on the class side there is a reference to "ExtendedNumberParser" >> which is not part of Pharo >> > > Yes, I messed up with the Configuration using #'pharo3.0' instead of > #'pharo3.0.x'. This should be fixed now (I hope). > For my superficial knowledge of Metacello, discovering the right > incantation is like black magic... > > > well we will have to clean and simplify all that in the future. > This is why versionner should be good so that people use it and we can > simplify the declarations. > > Stef > > But I had the feeling that Versionner UI is currently very limited vs Metacello options (especially w.r.t. cross dialect support) Or do you have a different POV, like only Pharo3.0 stuff should go to MetaRepoForPharo3.0, and the ConfigurationOf... should be expunged from any other dialect/version ? > >> >> Bye >> T. >> >> *Gesendet:* Sonntag, 16. MÃ¤rz 2014 um 17:31 Uhr >> *Von:* "Nicolas Cellier" <nicolas.cellier.aka.nice(a)gmail.com> >> *An:* "Pharo Development List" <pharo-dev(a)lists.pharo.org> >> *Betreff:* Re: [Pharo-dev] Adding a new catalog entry >> >> 2014-03-16 16:06 GMT+01:00 Sven Van Caekenberghe <sven(a)stfx.eu>: >>> >>> Nicolas, >>> >>> On 16 Mar 2014, at 10:08, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: >>> >>> > To get access your StHub account, if you have any, should be part of >>> the Pharo team, but I don't think I can do that. >>> >>> I now see that 'nice' is part of 'Pharo', so I think you should be able >>> to save to MetaRepoForPharo30. >>> >> >> >> Thanks, I think I messed up when entering my credentials... >> I have now published with a symbolic stable version. >> >> >>> Sven >> >> > >

March 16, 2014

Re: [Pharo-dev] Adding a new catalog entry

by Pharo4Stef

> > > - I can give you access but I need your account name > > Thanks Torsten, I have already access > > - on the class side there is a reference to "ExtendedNumberParser" which is not part of Pharo > > Yes, I messed up with the Configuration using #'pharo3.0' instead of #'pharo3.0.x'. This should be fixed now (I hope). > For my superficial knowledge of Metacello, discovering the right incantation is like black magicâ¦ well we will have to clean and simplify all that in the future. This is why versionner should be good so that people use it and we can simplify the declarations. Stef > > > Bye > T. > > Gesendet: Sonntag, 16. MÃ¤rz 2014 um 17:31 Uhr > Von: "Nicolas Cellier" <nicolas.cellier.aka.nice(a)gmail.com> > An: "Pharo Development List" <pharo-dev(a)lists.pharo.org> > Betreff: Re: [Pharo-dev] Adding a new catalog entry > > 2014-03-16 16:06 GMT+01:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > Nicolas, > > On 16 Mar 2014, at 10:08, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > > To get access your StHub account, if you have any, should be part of the Pharo team, but I don't think I can do that. > > I now see that 'nice' is part of 'Pharo', so I think you should be able to save to MetaRepoForPharo30. > > > Thanks, I think I messed up when entering my credentials... > I have now published with a symbolic stable version. > > Sven >

March 16, 2014

[ANN] ZTimezone support added to ZTimestamp

by Sven Van Caekenberghe

Hi, I just added a first version of timezone support to the ZTimestamp project - a small, lightweight, non-intrusive, self-dependent alternative to DateAndTime and friends. With this addition, it is now possible to work with UTC/GMT timestamps internally yet present correctly localised timestamps in any timezone, based on the standard Olsen database. ZTimestampFormat was extended with optional timezone support. About ZTimestamp https://ci.inria.fr/pharo-contribution/job/PharoProjectCatalog/HTML_Report/… https://github.com/svenvc/docs/blob/master/neo/ztimestamp.md ZTimestamp can be loaded most easily from the Pharo 2 or 3 Configuration Browser. StHub http://www.smalltalkhub.com/#!/~SvenVanCaekenberghe/Neo/packages/ZTimestamp CI job https://ci.inria.fr/pharo-contribution/job/ZTimestamp/ >From the class comment of ZTimezone https://github.com/svenvc/ztimestamp/tree/master/repository/ZTimestamp.pack… === I am ZTimezone, representing the timezone information in the standard Olsen database. http://en.wikipedia.org/wiki/Tz_database Usage You reference timezones by their ID. The list of supported identifiers is accessible using ZTimezone timezoneIdentifiers. To access a timezone do ZTimezone id: 'Europe/Brussels'. The necessary information will be loaded, parsed and cached from a binary file of the zoneinfo database (see also man tzfile). This should work automagically on Mac OS X and Unix, on Windows you have to download the necessary files and specify their location ZTimezone zoneInfoLocation: FileLocator C / 'foo' / 'bar' / 'zoneinfo'. Once you get a handle on a timezone, the main operation is to query the sub timezone that is applicable at a certain point in time (ZTimezone id: 'Europe/Brussels') subzoneForTimestamp: ZTimestamp now. The ZSubTimezone instance returned contains information like the UTC offset. Since you'll probably only be interested in that aspect there is a convenience method (ZTimezone id: 'Europe/Brussels') offsetForTimestamp: DateAndTime now. The flow is that for every GMT timestamp, you get the concrete offset to use for a specific timezone. Note that this is not a constant, it depends on the time periode the timestamp falls in. The are 2 more convenience methods to quickly convert between GTM and local wall time (ZTimezone id: #'Europe/Brussels') gmtToLocal: ZTimestamp now. (ZTimezone id: #'Europe/Brussels') localToGmt: DateAndTime now. Also note the zoneTab and the timezones are cached in the image. When the TZ database changes, it might be necessary to either call #cleanUp or #reloadAll. When moving images between machines, either all info should be loaded and cached, or it might be necessary to use #zoneInfoLocation: again. Implementation A chronological array of transition points in unix time specifies which sub zone is active from that point on to the next. === Sven

March 16, 2014

Re: [Pharo-dev] Adding a new catalog entry

by Nicolas Cellier

2014-03-16 19:49 GMT+01:00 Torsten Bergmann <astares(a)gmx.de>: > Hi Nicolas, > > - I can give you access but I need your account name > Thanks Torsten, I have already access > - on the class side there is a reference to "ExtendedNumberParser" which > is not part of Pharo > Yes, I messed up with the Configuration using #'pharo3.0' instead of #'pharo3.0.x'. This should be fixed now (I hope). For my superficial knowledge of Metacello, discovering the right incantation is like black magic... > > Bye > T. > > *Gesendet:* Sonntag, 16. MÃ¤rz 2014 um 17:31 Uhr > *Von:* "Nicolas Cellier" <nicolas.cellier.aka.nice(a)gmail.com> > *An:* "Pharo Development List" <pharo-dev(a)lists.pharo.org> > *Betreff:* Re: [Pharo-dev] Adding a new catalog entry > > 2014-03-16 16:06 GMT+01:00 Sven Van Caekenberghe <sven(a)stfx.eu>: >> >> Nicolas, >> >> On 16 Mar 2014, at 10:08, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: >> >> > To get access your StHub account, if you have any, should be part of >> the Pharo team, but I don't think I can do that. >> >> I now see that 'nice' is part of 'Pharo', so I think you should be able >> to save to MetaRepoForPharo30. >> > > > Thanks, I think I messed up when entering my credentials... > I have now published with a symbolic stable version. > > >> Sven > >

March 16, 2014

Re: [Pharo-dev] Image's size in pillar

by Pharo4Stef

ok now I understand you meant in the html output. Probably the exporter does not do it well. In latex it works. On 16 Mar 2014, at 19:51, Natalia Tymchuk <natalia.tymchuk(a)unikernel.net> wrote: > I see this code <figure><img src="pictures/AB2.png"></img><figcaption>AB2 example</figcaption></figure> > > in the generated file. And here is no width defined or maybe I didnât see it. > > On Mar 16, 2014, at 3:37 PM, Pharo4Stef <pharo4Stef(a)free.fr> wrote: > >> HI natalia >> >> in my chapter I do >> >> +Inspecting and interacting with a Dice>file://figures/DiceNoDetail.pdf|width=50|label=figDiceNoDetail+ >> >> and it is working. I checked and when I modify the size the picture size changes too. >> >> Stef >> >> On 16 Mar 2014, at 14:23, Natalia Tymchuk <natalia.tymchuk(a)unikernel.net> wrote: >> >>> Hello, >>> >>> I write chapter for PharoForTheEnterprise and I have problems with images. It is said, that I should use the syntax : >>> +Caption>file://image.png|width=50|label=label+ >>> >>> but with changing the value width I didnât get changes of my images sizes. How can I make my images take half of the pageâs width? >>> >>> Best regards, >>> Natalia >> >> > >

March 16, 2014

Re: [Pharo-dev] Adding a new catalog entry

by Pharo4Stef

nicolas was already committer there :) On 16 Mar 2014, at 19:49, Torsten Bergmann <astares(a)gmx.de> wrote: > Hi Nicolas, > > - I can give you access but I need your account name > - on the class side there is a reference to "ExtendedNumberParser" which is not part of Pharo > > Bye > T. > > Gesendet: Sonntag, 16. MÃ¤rz 2014 um 17:31 Uhr > Von: "Nicolas Cellier" <nicolas.cellier.aka.nice(a)gmail.com> > An: "Pharo Development List" <pharo-dev(a)lists.pharo.org> > Betreff: Re: [Pharo-dev] Adding a new catalog entry > > 2014-03-16 16:06 GMT+01:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > Nicolas, > > On 16 Mar 2014, at 10:08, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > > To get access your StHub account, if you have any, should be part of the Pharo team, but I don't think I can do that. > > I now see that 'nice' is part of 'Pharo', so I think you should be able to save to MetaRepoForPharo30. > > > Thanks, I think I messed up when entering my credentials... > I have now published with a symbolic stable version. > > Sven

March 16, 2014

Re: [Pharo-dev] Image's size in pillar

by Natalia Tymchuk

I see this code <figure><img src="pictures/AB2.png"></img><figcaption>AB2 example</figcaption></figure> in the generated file. And here is no width defined or maybe I didnât see it. On Mar 16, 2014, at 3:37 PM, Pharo4Stef <pharo4Stef(a)free.fr> wrote: > HI natalia > > in my chapter I do > > +Inspecting and interacting with a Dice>file://figures/DiceNoDetail.pdf|width=50|label=figDiceNoDetail+ > > and it is working. I checked and when I modify the size the picture size changes too. > > Stef > > On 16 Mar 2014, at 14:23, Natalia Tymchuk <natalia.tymchuk(a)unikernel.net> wrote: > >> Hello, >> >> I write chapter for PharoForTheEnterprise and I have problems with images. It is said, that I should use the syntax : >> +Caption>file://image.png|width=50|label=label+ >> >> but with changing the value width I didnât get changes of my images sizes. How can I make my images take half of the pageâs width? >> >> Best regards, >> Natalia > >

March 16, 2014

Re: [Pharo-dev] Adding a new catalog entry

by Torsten Bergmann

March 16, 2014

Re: [Pharo-dev] [Bug]13088-Deleting class that is used in pool dictionaries leaves a "private" class pool entry

by Pharo4Stef

thanks max Iâm sure that there is a bug nest around. I do not remember exactly what I did but I redid the X11 tutorial I noticed problem when touching poolvar apparently the using methods were not well recompiled. So I had to do it manually. Stef > https://pharo.fogbugz.com/f/cases/13088/Deleting-class-that-is-used-in-pool…

March 16, 2014