- Pharo-dev - lists.pharo.org

[Pharo 8.0] Build #282: 3379-Hiedra-Migrate-example-to-current-Spec

by ci-pharo-ci-jenkins2＠inria.fr

There is a new Pharo build available! The status of the build #282 was: SUCCESS. The Pull Request #3380 was integrated: "3379-Hiedra-Migrate-example-to-current-Spec" Pull request url: https://github.com/pharo-project/pharo/pull/3380 Issue Url: https://github.com/pharo-project/pharo/issues/3379 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

May 21, 2019

[Pharo 8.0] Build #281: 3362-RBClassModelFactory-rbClass-should-be-pushed-to-instance-side

by ci-pharo-ci-jenkins2＠inria.fr

There is a new Pharo build available! The status of the build #281 was: SUCCESS. The Pull Request #3365 was integrated: "3362-RBClassModelFactory-rbClass-should-be-pushed-to-instance-side" Pull request url: https://github.com/pharo-project/pharo/pull/3365 Issue Url: https://github.com/pharo-project/pharo/issues/3362 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

May 21, 2019

Re: [Pharo-dev] FloatArray

by Jimmie Houchin

Not a problem. I greatly respective other peoples time and priorities and their personal lives. Just for the record I am using 64bit Pharo on a fast i7, 16gb ram, laptop running Xubunut 18.04 64bit. I do not remember any problems loading. And within the small amount of experimenting that I did, it seemed to operate fine. Again, thanks for your contribution. I know it is a lot of work and a pretty large area to cover. Python/Numpy has armies of people working on this. Jimmie On 5/21/19 2:54 AM, Nicolas Cellier wrote: > Hi Jimmie, > I didn't take time yesterday to analyze your specific example because > it was quite late, but here are some remarks: > 1) First, I recommend using 64bits Pharo, because number crunching and > Float operations will be faster (not FloatArray though). > 2) it would be nice to use a profiler to analyze where time is spent > Â I would not be amazed that (Float readFrom:...) takes a non > neglectable percentage of it > 3) ExternalDoubleArray only add overhead if no bulk-operation is performed > Â (like reading raw binary data or serving as storage area passed to > Lapack/blas primitives) > Â it does not provide accelerated features by itself indeed. > Â I think that it is too low level to serve as a primary interface. > 4) LapackXXXMatrix sum has effectively not been optimized to use BLAS, > and this can be easily corrected, thanks for giving this example. > With some cooperation, we could easily make some progress, there are > low hanging fruits. > But I understand if you prefer to stick with more mature numpy solution. > Thanks for trying. At least, you were able to load and use Smallapack > in Pharo, and this is already a good feedback. > If you have time, I'll publish a small enhancement for accelerating > sum, and ask you to retry. > Thanks again > > > LeÂ mar. 21 mai 2019 Ã Â 05:13, Serge Stinckwich > <serge.stinckwich(a)gmail.com <mailto:serge.stinckwich@gmail.com>> a Ã©critÂ : > > There is another solution with my TensorFlow Pharo binding: > https://github.com/PolyMathOrg/libtensorflow-pharo-bindings > > You can do a matrix multiplication like that : > > | graph t1 t2 c1 c2 mult session result | > graph := TF_Graph create. > t1 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). > t2 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). > c1 := graph const: 'c1' value: t1. > c2 := graph const: 'c2' value: t2. > mult := c1 * c2. > session := TF_Session on: graph. > result := session runOutput: (mult output: 0). > result asNumbers > > Here I'm doing a multiplication between 2 matrices of 1000X1000 > size in 537 ms on my computer. > > All operations can be done in a graph of operations that is run > outside Pharo, so could be very fast. > Operations can be done on CPU or GPU. 32 bits or 64 bits float > operations are possible. > > This is a work in progress but can already be used. > Regards, > > > > On Tue, May 21, 2019 at 6:54 AM Jimmie Houchin > <jlhouchin(a)gmail.com <mailto:jlhouchin@gmail.com>> wrote: > > I wasn't worried about how to do sliding windows. My problem > is that using LapackDGEMatrix in my example was 18x slower > than FloatArray, which is slower than Numpy. It isn't what I > was expecting. > > What I didn't know is if I was doing something wrong to cause > such a tremendous slow down. > > Python and Numpy is not my favorite. But it isn't uncomfortable. > > So I gave up and went back to Numpy. > > Thanks. > > > > On 5/20/19 5:17 PM, Nicolas Cellier wrote: >> Hi Jimmie, >> effectively I did not subsribe... >> Having efficient methods for sliding window average is >> possible, here is how I would do it: >> >> "Create a vector with 100,000 rows filles with random values >> (uniform distrubution in [0,1]" >> v := LapackDGEMatrix randUniform: #(100000 1). >> >> "extract values from rank 10001 to 20000" >> w1 := v atIntervalFrom: 10001 to: 20000 by: 1. >> >> "create a left multiplier matrix for performing average of w1" >> a := LapackDGEMatrix nrow: 1 ncol: w1 nrow withAll: 1.0 / w1 >> size. >> >> "get the average (this is a 1x1 matrix from which we take >> first element)" >> avg1 := (a * w1) at: 1. >> >> [ "select another slice of same size" >> w2 := v atIntervalFrom: 15001 to: 25000 by: 1. >> >> "get the average (we can recycle a)" >> avg2 := (a * w2) at: 1 ] bench. >> >> This gives: >> Â '16,500 per second. 60.7 microseconds per run.' >> versus: >> [w2 sum / w2 size] bench. >> Â '1,100 per second. 908 microseconds per run.' >> >> For max and min, it's harder. Lapack/Blas only provide max of >> absolute value as primitive: >> [w2 absMax] bench. >> Â '19,400 per second. 51.5 microseconds per run.' >> >> Everything else will be slower, unless we write new >> primitives in C and connect them... >> [w2 maxOf: [:each | each]] bench. >> Â '984 per second. 1.02 milliseconds per run.' >> >> LeÂ dim. 19 mai 2019 Ã Â 14:58, Jimmie <jlhouchin(a)gmail.com >> <mailto:jlhouchin@gmail.com>> a Ã©critÂ : >> >> On 5/16/19 1:26 PM, Nicolas Cellier wrote:> Any feedback >> on this? >> Â > Did someone tried to use Smallapack in Pharo? >> Â > Jimmie? >> Â > >> >> I am going to guess that you are not on pharo-users. My bad. >> I posted this in pharo-users as I it wasn't Pharo >> development question. >> >> I probably should have posted here or emailed you directly. >> >> All I really need is good performance with a simple array >> of floats. No >> matrix math. Nothing complicated. Moving Averages over a >> slice of the >> array. A variety of different averages, weighted, etc. >> Max/min of the >> array. But just a single simple array. >> >> Any help greatly appreciated. >> >> Thanks. >> >> >> On 4/28/19 8:32 PM, Jimmie Houchin wrote: >> Hello, >> >> I have installed Smallapack into Pharo 7.0.3. Thanks >> Nicholas. >> >> I am very unsure on my use of Smallapack. I am not a >> mathematician or >> scientist. However the only part of Smallapack I am >> trying to use at the >> moment is something that wouldÂ be 64bit and compare to >> FloatArray so >> that I can do some simple accessing, slicing, sum, and >> average on the array. >> >> Here is some sample code I wrote just to play in a >> playground. >> >> I have an ExternalDoubleArray, LapackDGEMatrix, and a >> FloatArray >> samples. The ones not in use are commented out for any run. >> >> fp is a download from >> http://ratedata.gaincapital.com/2018/12%20December/EUR_USD_Week1.zip >> and unzipped to a directory. >> >> fp := '/home/jimmie/data/EUR_USD_Week1.csv' >> index := 0. >> pricesSum := 0. >> asum := 0. >> ttr := [ >> Â Â Â lines := fp asFileReference contents lines allButFirst. >> Â Â Â a := ExternalDoubleArray new: lines size. >> Â Â Â "la := LapackDGEMatrix allocateNrow: lines size ncol: 1. >> Â Â Â a := la columnAt: 1." >> Â Â Â "a := FloatArray new: lines size." >> Â Â Â lines do: [ :line || parts price | >> Â Â Â Â Â parts := ',' split: line. >> Â Â Â Â Â index := index + 1. >> Â Â Â Â Â price := Float readFrom: (parts last). >> Â Â Â Â Â a at: index put: price. >> Â Â Â Â Â pricesSum := pricesSum + price. >> Â Â Â Â Â (index rem: 100) = 0 ifTrue: [ >> Â Â Â Â Â Â Â asum := a sum. >> Â Â Â ]]] timeToRun. >> { index. pricesSum. asum. ttr }. >> Â "ExternalDoubleArray an Array(337588 383662.5627699992 >> 383562.2956199993 0:00:01:59.885)" >> Â "FloatArrayÂ an Array(337588 383662.5627699992 >> 383562.2954441309 >> 0:00:00:06.555)" >> >> FloatArray is not the precision I need. But it is over >> 18x faster. >> >> I am afraid I must be doing something badly wrong. >> Python/Numpy is over >> 4x faster than FloatArray for the above. >> >> If I am using Smallapack incorrectly please help. >> >> Any help greatly appreciated. >> >> Thanks. >> >> > > > -- > Serge Stinckwic > âhâ > > Int. Research Unit > Â on Modelling/Simulation of Complex Systems (UMMISCO) > âSorbonne University > Â (SU) > French National Research Institute for Sustainable Development (IRD)â > U > âniversity of YaoundÃ© Iâ, Cameroon > "Programs must be written for people to read, and only > incidentally for machines to execute." > https://twitter.com/SergeStinckwich > > â >

May 21, 2019

[Pharo 7.0] Build #159: Fixes #3302 for Pharo 7.

by ci-pharo-ci-jenkins2＠inria.fr

There is a new Pharo build available! The status of the build #159 was: FAILURE. The Pull Request #3340 was integrated: "Fixes #3302 for Pharo 7." Pull request url: https://github.com/pharo-project/pharo/pull/3340 Issue Url: https://pharo.fogbugz.com/f/cases/Pharo Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

May 21, 2019

Re: [Pharo-dev] FloatArray

by Nicolas Cellier

Hi Serge, this is good news, having tensor flow bindings is also a must! I have this in Smallapack with pure CPU unaccelerated blas (no MKL, nor ATLAS, just plain and dumb netlib code) | a b | a := LapackDGEMatrix randNormal: #(1000 1000). b := LapackDGEMatrix randNormal: #(1000 1000). [a * b] timeToRun 783 | a b | a := LapackSGEMatrix randNormal: #(1000 1000). b := LapackSGEMatrix randNormal: #(1000 1000). [a * b] timeToRun 448 Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz So I think that we can get much better with accelerated library! Le mar. 21 mai 2019 Ã 05:13, Serge Stinckwich <serge.stinckwich(a)gmail.com> a Ã©crit : > There is another solution with my TensorFlow Pharo binding: > https://github.com/PolyMathOrg/libtensorflow-pharo-bindings > > You can do a matrix multiplication like that : > > | graph t1 t2 c1 c2 mult session result | > graph := TF_Graph create. > t1 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). > t2 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). > c1 := graph const: 'c1' value: t1. > c2 := graph const: 'c2' value: t2. > mult := c1 * c2. > session := TF_Session on: graph. > result := session runOutput: (mult output: 0). > result asNumbers > > Here I'm doing a multiplication between 2 matrices of 1000X1000 size in > 537 ms on my computer. > > All operations can be done in a graph of operations that is run outside > Pharo, so could be very fast. > Operations can be done on CPU or GPU. 32 bits or 64 bits float operations > are possible. > > This is a work in progress but can already be used. > Regards, > > > > On Tue, May 21, 2019 at 6:54 AM Jimmie Houchin <jlhouchin(a)gmail.com> > wrote: > >> I wasn't worried about how to do sliding windows. My problem is that >> using LapackDGEMatrix in my example was 18x slower than FloatArray, which >> is slower than Numpy. It isn't what I was expecting. >> >> What I didn't know is if I was doing something wrong to cause such a >> tremendous slow down. >> >> Python and Numpy is not my favorite. But it isn't uncomfortable. >> >> So I gave up and went back to Numpy. >> >> Thanks. >> >> >> >> On 5/20/19 5:17 PM, Nicolas Cellier wrote: >> >> Hi Jimmie, >> effectively I did not subsribe... >> Having efficient methods for sliding window average is possible, here is >> how I would do it: >> >> "Create a vector with 100,000 rows filles with random values (uniform >> distrubution in [0,1]" >> v := LapackDGEMatrix randUniform: #(100000 1). >> >> "extract values from rank 10001 to 20000" >> w1 := v atIntervalFrom: 10001 to: 20000 by: 1. >> >> "create a left multiplier matrix for performing average of w1" >> a := LapackDGEMatrix nrow: 1 ncol: w1 nrow withAll: 1.0 / w1 size. >> >> "get the average (this is a 1x1 matrix from which we take first element)" >> avg1 := (a * w1) at: 1. >> >> [ "select another slice of same size" >> w2 := v atIntervalFrom: 15001 to: 25000 by: 1. >> >> "get the average (we can recycle a)" >> avg2 := (a * w2) at: 1 ] bench. >> >> This gives: >> '16,500 per second. 60.7 microseconds per run.' >> versus: >> [w2 sum / w2 size] bench. >> '1,100 per second. 908 microseconds per run.' >> >> For max and min, it's harder. Lapack/Blas only provide max of absolute >> value as primitive: >> [w2 absMax] bench. >> '19,400 per second. 51.5 microseconds per run.' >> >> Everything else will be slower, unless we write new primitives in C and >> connect them... >> [w2 maxOf: [:each | each]] bench. >> '984 per second. 1.02 milliseconds per run.' >> >> Le dim. 19 mai 2019 Ã 14:58, Jimmie <jlhouchin(a)gmail.com> a Ã©crit : >> >>> On 5/16/19 1:26 PM, Nicolas Cellier wrote:> Any feedback on this? >>> > Did someone tried to use Smallapack in Pharo? >>> > Jimmie? >>> > >>> >>> I am going to guess that you are not on pharo-users. My bad. >>> I posted this in pharo-users as I it wasn't Pharo development question. >>> >>> I probably should have posted here or emailed you directly. >>> >>> All I really need is good performance with a simple array of floats. No >>> matrix math. Nothing complicated. Moving Averages over a slice of the >>> array. A variety of different averages, weighted, etc. Max/min of the >>> array. But just a single simple array. >>> >>> Any help greatly appreciated. >>> >>> Thanks. >>> >>> >>> On 4/28/19 8:32 PM, Jimmie Houchin wrote: >>> Hello, >>> >>> I have installed Smallapack into Pharo 7.0.3. Thanks Nicholas. >>> >>> I am very unsure on my use of Smallapack. I am not a mathematician or >>> scientist. However the only part of Smallapack I am trying to use at the >>> moment is something that would be 64bit and compare to FloatArray so >>> that I can do some simple accessing, slicing, sum, and average on the >>> array. >>> >>> Here is some sample code I wrote just to play in a playground. >>> >>> I have an ExternalDoubleArray, LapackDGEMatrix, and a FloatArray >>> samples. The ones not in use are commented out for any run. >>> >>> fp is a download from >>> http://ratedata.gaincapital.com/2018/12%20December/EUR_USD_Week1.zip >>> and unzipped to a directory. >>> >>> fp := '/home/jimmie/data/EUR_USD_Week1.csv' >>> index := 0. >>> pricesSum := 0. >>> asum := 0. >>> ttr := [ >>> lines := fp asFileReference contents lines allButFirst. >>> a := ExternalDoubleArray new: lines size. >>> "la := LapackDGEMatrix allocateNrow: lines size ncol: 1. >>> a := la columnAt: 1." >>> "a := FloatArray new: lines size." >>> lines do: [ :line || parts price | >>> parts := ',' split: line. >>> index := index + 1. >>> price := Float readFrom: (parts last). >>> a at: index put: price. >>> pricesSum := pricesSum + price. >>> (index rem: 100) = 0 ifTrue: [ >>> asum := a sum. >>> ]]] timeToRun. >>> { index. pricesSum. asum. ttr }. >>> "ExternalDoubleArray an Array(337588 383662.5627699992 >>> 383562.2956199993 0:00:01:59.885)" >>> "FloatArray an Array(337588 383662.5627699992 383562.2954441309 >>> 0:00:00:06.555)" >>> >>> FloatArray is not the precision I need. But it is over 18x faster. >>> >>> I am afraid I must be doing something badly wrong. Python/Numpy is over >>> 4x faster than FloatArray for the above. >>> >>> If I am using Smallapack incorrectly please help. >>> >>> Any help greatly appreciated. >>> >>> Thanks. >>> >>> >>> > > -- > Serge Stinckwic > h > > Int. Research Unit > on Modelling/Simulation of Complex Systems (UMMISCO) > Sorbonne University > (SU) > French National Research Institute for Sustainable Development (IRD) > U > niversity of YaoundÃ© I, Cameroon > "Programs must be written for people to read, and only incidentally for > machines to execute." > https://twitter.com/SergeStinckwich >

May 21, 2019

Re: [Pharo-dev] FloatArray

by Nicolas Cellier

Hi Jimmie, I didn't take time yesterday to analyze your specific example because it was quite late, but here are some remarks: 1) First, I recommend using 64bits Pharo, because number crunching and Float operations will be faster (not FloatArray though). 2) it would be nice to use a profiler to analyze where time is spent I would not be amazed that (Float readFrom:...) takes a non neglectable percentage of it 3) ExternalDoubleArray only add overhead if no bulk-operation is performed (like reading raw binary data or serving as storage area passed to Lapack/blas primitives) it does not provide accelerated features by itself indeed. I think that it is too low level to serve as a primary interface. 4) LapackXXXMatrix sum has effectively not been optimized to use BLAS, and this can be easily corrected, thanks for giving this example. With some cooperation, we could easily make some progress, there are low hanging fruits. But I understand if you prefer to stick with more mature numpy solution. Thanks for trying. At least, you were able to load and use Smallapack in Pharo, and this is already a good feedback. If you have time, I'll publish a small enhancement for accelerating sum, and ask you to retry. Thanks again Le mar. 21 mai 2019 Ã 05:13, Serge Stinckwich <serge.stinckwich(a)gmail.com> a Ã©crit : > There is another solution with my TensorFlow Pharo binding: > https://github.com/PolyMathOrg/libtensorflow-pharo-bindings > > You can do a matrix multiplication like that : > > | graph t1 t2 c1 c2 mult session result | > graph := TF_Graph create. > t1 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). > t2 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). > c1 := graph const: 'c1' value: t1. > c2 := graph const: 'c2' value: t2. > mult := c1 * c2. > session := TF_Session on: graph. > result := session runOutput: (mult output: 0). > result asNumbers > > Here I'm doing a multiplication between 2 matrices of 1000X1000 size in > 537 ms on my computer. > > All operations can be done in a graph of operations that is run outside > Pharo, so could be very fast. > Operations can be done on CPU or GPU. 32 bits or 64 bits float operations > are possible. > > This is a work in progress but can already be used. > Regards, > > > > On Tue, May 21, 2019 at 6:54 AM Jimmie Houchin <jlhouchin(a)gmail.com> > wrote: > >> I wasn't worried about how to do sliding windows. My problem is that >> using LapackDGEMatrix in my example was 18x slower than FloatArray, which >> is slower than Numpy. It isn't what I was expecting. >> >> What I didn't know is if I was doing something wrong to cause such a >> tremendous slow down. >> >> Python and Numpy is not my favorite. But it isn't uncomfortable. >> >> So I gave up and went back to Numpy. >> >> Thanks. >> >> >> >> On 5/20/19 5:17 PM, Nicolas Cellier wrote: >> >> Hi Jimmie, >> effectively I did not subsribe... >> Having efficient methods for sliding window average is possible, here is >> how I would do it: >> >> "Create a vector with 100,000 rows filles with random values (uniform >> distrubution in [0,1]" >> v := LapackDGEMatrix randUniform: #(100000 1). >> >> "extract values from rank 10001 to 20000" >> w1 := v atIntervalFrom: 10001 to: 20000 by: 1. >> >> "create a left multiplier matrix for performing average of w1" >> a := LapackDGEMatrix nrow: 1 ncol: w1 nrow withAll: 1.0 / w1 size. >> >> "get the average (this is a 1x1 matrix from which we take first element)" >> avg1 := (a * w1) at: 1. >> >> [ "select another slice of same size" >> w2 := v atIntervalFrom: 15001 to: 25000 by: 1. >> >> "get the average (we can recycle a)" >> avg2 := (a * w2) at: 1 ] bench. >> >> This gives: >> '16,500 per second. 60.7 microseconds per run.' >> versus: >> [w2 sum / w2 size] bench. >> '1,100 per second. 908 microseconds per run.' >> >> For max and min, it's harder. Lapack/Blas only provide max of absolute >> value as primitive: >> [w2 absMax] bench. >> '19,400 per second. 51.5 microseconds per run.' >> >> Everything else will be slower, unless we write new primitives in C and >> connect them... >> [w2 maxOf: [:each | each]] bench. >> '984 per second. 1.02 milliseconds per run.' >> >> Le dim. 19 mai 2019 Ã 14:58, Jimmie <jlhouchin(a)gmail.com> a Ã©crit : >> >>> On 5/16/19 1:26 PM, Nicolas Cellier wrote:> Any feedback on this? >>> > Did someone tried to use Smallapack in Pharo? >>> > Jimmie? >>> > >>> >>> I am going to guess that you are not on pharo-users. My bad. >>> I posted this in pharo-users as I it wasn't Pharo development question. >>> >>> I probably should have posted here or emailed you directly. >>> >>> All I really need is good performance with a simple array of floats. No >>> matrix math. Nothing complicated. Moving Averages over a slice of the >>> array. A variety of different averages, weighted, etc. Max/min of the >>> array. But just a single simple array. >>> >>> Any help greatly appreciated. >>> >>> Thanks. >>> >>> >>> On 4/28/19 8:32 PM, Jimmie Houchin wrote: >>> Hello, >>> >>> I have installed Smallapack into Pharo 7.0.3. Thanks Nicholas. >>> >>> I am very unsure on my use of Smallapack. I am not a mathematician or >>> scientist. However the only part of Smallapack I am trying to use at the >>> moment is something that would be 64bit and compare to FloatArray so >>> that I can do some simple accessing, slicing, sum, and average on the >>> array. >>> >>> Here is some sample code I wrote just to play in a playground. >>> >>> I have an ExternalDoubleArray, LapackDGEMatrix, and a FloatArray >>> samples. The ones not in use are commented out for any run. >>> >>> fp is a download from >>> http://ratedata.gaincapital.com/2018/12%20December/EUR_USD_Week1.zip >>> and unzipped to a directory. >>> >>> fp := '/home/jimmie/data/EUR_USD_Week1.csv' >>> index := 0. >>> pricesSum := 0. >>> asum := 0. >>> ttr := [ >>> lines := fp asFileReference contents lines allButFirst. >>> a := ExternalDoubleArray new: lines size. >>> "la := LapackDGEMatrix allocateNrow: lines size ncol: 1. >>> a := la columnAt: 1." >>> "a := FloatArray new: lines size." >>> lines do: [ :line || parts price | >>> parts := ',' split: line. >>> index := index + 1. >>> price := Float readFrom: (parts last). >>> a at: index put: price. >>> pricesSum := pricesSum + price. >>> (index rem: 100) = 0 ifTrue: [ >>> asum := a sum. >>> ]]] timeToRun. >>> { index. pricesSum. asum. ttr }. >>> "ExternalDoubleArray an Array(337588 383662.5627699992 >>> 383562.2956199993 0:00:01:59.885)" >>> "FloatArray an Array(337588 383662.5627699992 383562.2954441309 >>> 0:00:00:06.555)" >>> >>> FloatArray is not the precision I need. But it is over 18x faster. >>> >>> I am afraid I must be doing something badly wrong. Python/Numpy is over >>> 4x faster than FloatArray for the above. >>> >>> If I am using Smallapack incorrectly please help. >>> >>> Any help greatly appreciated. >>> >>> Thanks. >>> >>> >>> > > -- > Serge Stinckwic > âhâ > > Int. Research Unit > on Modelling/Simulation of Complex Systems (UMMISCO) > âSorbonne University > (SU) > French National Research Institute for Sustainable Development (IRD)â > U > âniversity of YaoundÃ© Iâ, Cameroon > "Programs must be written for people to read, and only incidentally for > machines to execute." > https://twitter.com/SergeStinckwich > â >

May 21, 2019

Re: [Pharo-dev] FloatArray

by Serge Stinckwich

There is another solution with my TensorFlow Pharo binding: https://github.com/PolyMathOrg/libtensorflow-pharo-bindings You can do a matrix multiplication like that : | graph t1 t2 c1 c2 mult session result | graph := TF_Graph create. t1 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). t2 := TF_Tensor fromFloats: (1 to:1000000) asArray shape:#(1000 1000). c1 := graph const: 'c1' value: t1. c2 := graph const: 'c2' value: t2. mult := c1 * c2. session := TF_Session on: graph. result := session runOutput: (mult output: 0). result asNumbers Here I'm doing a multiplication between 2 matrices of 1000X1000 size in 537 ms on my computer. All operations can be done in a graph of operations that is run outside Pharo, so could be very fast. Operations can be done on CPU or GPU. 32 bits or 64 bits float operations are possible. This is a work in progress but can already be used. Regards, On Tue, May 21, 2019 at 6:54 AM Jimmie Houchin <jlhouchin(a)gmail.com> wrote: > I wasn't worried about how to do sliding windows. My problem is that using > LapackDGEMatrix in my example was 18x slower than FloatArray, which is > slower than Numpy. It isn't what I was expecting. > > What I didn't know is if I was doing something wrong to cause such a > tremendous slow down. > > Python and Numpy is not my favorite. But it isn't uncomfortable. > > So I gave up and went back to Numpy. > > Thanks. > > > > On 5/20/19 5:17 PM, Nicolas Cellier wrote: > > Hi Jimmie, > effectively I did not subsribe... > Having efficient methods for sliding window average is possible, here is > how I would do it: > > "Create a vector with 100,000 rows filles with random values (uniform > distrubution in [0,1]" > v := LapackDGEMatrix randUniform: #(100000 1). > > "extract values from rank 10001 to 20000" > w1 := v atIntervalFrom: 10001 to: 20000 by: 1. > > "create a left multiplier matrix for performing average of w1" > a := LapackDGEMatrix nrow: 1 ncol: w1 nrow withAll: 1.0 / w1 size. > > "get the average (this is a 1x1 matrix from which we take first element)" > avg1 := (a * w1) at: 1. > > [ "select another slice of same size" > w2 := v atIntervalFrom: 15001 to: 25000 by: 1. > > "get the average (we can recycle a)" > avg2 := (a * w2) at: 1 ] bench. > > This gives: > '16,500 per second. 60.7 microseconds per run.' > versus: > [w2 sum / w2 size] bench. > '1,100 per second. 908 microseconds per run.' > > For max and min, it's harder. Lapack/Blas only provide max of absolute > value as primitive: > [w2 absMax] bench. > '19,400 per second. 51.5 microseconds per run.' > > Everything else will be slower, unless we write new primitives in C and > connect them... > [w2 maxOf: [:each | each]] bench. > '984 per second. 1.02 milliseconds per run.' > > Le dim. 19 mai 2019 Ã 14:58, Jimmie <jlhouchin(a)gmail.com> a Ã©crit : > >> On 5/16/19 1:26 PM, Nicolas Cellier wrote:> Any feedback on this? >> > Did someone tried to use Smallapack in Pharo? >> > Jimmie? >> > >> >> I am going to guess that you are not on pharo-users. My bad. >> I posted this in pharo-users as I it wasn't Pharo development question. >> >> I probably should have posted here or emailed you directly. >> >> All I really need is good performance with a simple array of floats. No >> matrix math. Nothing complicated. Moving Averages over a slice of the >> array. A variety of different averages, weighted, etc. Max/min of the >> array. But just a single simple array. >> >> Any help greatly appreciated. >> >> Thanks. >> >> >> On 4/28/19 8:32 PM, Jimmie Houchin wrote: >> Hello, >> >> I have installed Smallapack into Pharo 7.0.3. Thanks Nicholas. >> >> I am very unsure on my use of Smallapack. I am not a mathematician or >> scientist. However the only part of Smallapack I am trying to use at the >> moment is something that would be 64bit and compare to FloatArray so >> that I can do some simple accessing, slicing, sum, and average on the >> array. >> >> Here is some sample code I wrote just to play in a playground. >> >> I have an ExternalDoubleArray, LapackDGEMatrix, and a FloatArray >> samples. The ones not in use are commented out for any run. >> >> fp is a download from >> http://ratedata.gaincapital.com/2018/12%20December/EUR_USD_Week1.zip >> and unzipped to a directory. >> >> fp := '/home/jimmie/data/EUR_USD_Week1.csv' >> index := 0. >> pricesSum := 0. >> asum := 0. >> ttr := [ >> lines := fp asFileReference contents lines allButFirst. >> a := ExternalDoubleArray new: lines size. >> "la := LapackDGEMatrix allocateNrow: lines size ncol: 1. >> a := la columnAt: 1." >> "a := FloatArray new: lines size." >> lines do: [ :line || parts price | >> parts := ',' split: line. >> index := index + 1. >> price := Float readFrom: (parts last). >> a at: index put: price. >> pricesSum := pricesSum + price. >> (index rem: 100) = 0 ifTrue: [ >> asum := a sum. >> ]]] timeToRun. >> { index. pricesSum. asum. ttr }. >> "ExternalDoubleArray an Array(337588 383662.5627699992 >> 383562.2956199993 0:00:01:59.885)" >> "FloatArray an Array(337588 383662.5627699992 383562.2954441309 >> 0:00:00:06.555)" >> >> FloatArray is not the precision I need. But it is over 18x faster. >> >> I am afraid I must be doing something badly wrong. Python/Numpy is over >> 4x faster than FloatArray for the above. >> >> If I am using Smallapack incorrectly please help. >> >> Any help greatly appreciated. >> >> Thanks. >> >> >> -- Serge Stinckwic âhâ Int. Research Unit on Modelling/Simulation of Complex Systems (UMMISCO) âSorbonne University (SU) French National Research Institute for Sustainable Development (IRD)â U âniversity of YaoundÃ© Iâ, Cameroon "Programs must be written for people to read, and only incidentally for machines to execute." https://twitter.com/SergeStinckwich â

May 21, 2019

Re: [Pharo-dev] FloatArray

by Jimmie Houchin

I wasn't worried about how to do sliding windows. My problem is that using LapackDGEMatrix in my example was 18x slower than FloatArray, which is slower than Numpy. It isn't what I was expecting. What I didn't know is if I was doing something wrong to cause such a tremendous slow down. Python and Numpy is not my favorite. But it isn't uncomfortable. So I gave up and went back to Numpy. Thanks. On 5/20/19 5:17 PM, Nicolas Cellier wrote: > Hi Jimmie, > effectively I did not subsribe... > Having efficient methods for sliding window average is possible, here > is how I would do it: > > "Create a vector with 100,000 rows filles with random values (uniform > distrubution in [0,1]" > v := LapackDGEMatrix randUniform: #(100000 1). > > "extract values from rank 10001 to 20000" > w1 := v atIntervalFrom: 10001 to: 20000 by: 1. > > "create a left multiplier matrix for performing average of w1" > a := LapackDGEMatrix nrow: 1 ncol: w1 nrow withAll: 1.0 / w1 size. > > "get the average (this is a 1x1 matrix from which we take first element)" > avg1 := (a * w1) at: 1. > > [ "select another slice of same size" > w2 := v atIntervalFrom: 15001 to: 25000 by: 1. > > "get the average (we can recycle a)" > avg2 := (a * w2) at: 1 ] bench. > > This gives: > Â '16,500 per second. 60.7 microseconds per run.' > versus: > [w2 sum / w2 size] bench. > Â '1,100 per second. 908 microseconds per run.' > > For max and min, it's harder. Lapack/Blas only provide max of absolute > value as primitive: > [w2 absMax] bench. > Â '19,400 per second. 51.5 microseconds per run.' > > Everything else will be slower, unless we write new primitives in C > and connect them... > [w2 maxOf: [:each | each]] bench. > Â '984 per second. 1.02 milliseconds per run.' > > LeÂ dim. 19 mai 2019 Ã Â 14:58, Jimmie <jlhouchin(a)gmail.com > <mailto:jlhouchin@gmail.com>> a Ã©critÂ : > > On 5/16/19 1:26 PM, Nicolas Cellier wrote:> Any feedback on this? > Â > Did someone tried to use Smallapack in Pharo? > Â > Jimmie? > Â > > > I am going to guess that you are not on pharo-users. My bad. > I posted this in pharo-users as I it wasn't Pharo development > question. > > I probably should have posted here or emailed you directly. > > All I really need is good performance with a simple array of > floats. No > matrix math. Nothing complicated. Moving Averages over a slice of the > array. A variety of different averages, weighted, etc. Max/min of the > array. But just a single simple array. > > Any help greatly appreciated. > > Thanks. > > > On 4/28/19 8:32 PM, Jimmie Houchin wrote: > Hello, > > I have installed Smallapack into Pharo 7.0.3. Thanks Nicholas. > > I am very unsure on my use of Smallapack. I am not a mathematician or > scientist. However the only part of Smallapack I am trying to use > at the > moment is something that wouldÂ be 64bit and compare to FloatArray so > that I can do some simple accessing, slicing, sum, and average on > the array. > > Here is some sample code I wrote just to play in a playground. > > I have an ExternalDoubleArray, LapackDGEMatrix, and a FloatArray > samples. The ones not in use are commented out for any run. > > fp is a download from > http://ratedata.gaincapital.com/2018/12%20December/EUR_USD_Week1.zip > and unzipped to a directory. > > fp := '/home/jimmie/data/EUR_USD_Week1.csv' > index := 0. > pricesSum := 0. > asum := 0. > ttr := [ > Â Â Â lines := fp asFileReference contents lines allButFirst. > Â Â Â a := ExternalDoubleArray new: lines size. > Â Â Â "la := LapackDGEMatrix allocateNrow: lines size ncol: 1. > Â Â Â a := la columnAt: 1." > Â Â Â "a := FloatArray new: lines size." > Â Â Â lines do: [ :line || parts price | > Â Â Â Â Â parts := ',' split: line. > Â Â Â Â Â index := index + 1. > Â Â Â Â Â price := Float readFrom: (parts last). > Â Â Â Â Â a at: index put: price. > Â Â Â Â Â pricesSum := pricesSum + price. > Â Â Â Â Â (index rem: 100) = 0 ifTrue: [ > Â Â Â Â Â Â Â asum := a sum. > Â Â Â ]]] timeToRun. > { index. pricesSum. asum. ttr }. > Â "ExternalDoubleArray an Array(337588 383662.5627699992 > 383562.2956199993 0:00:01:59.885)" > Â "FloatArrayÂ an Array(337588 383662.5627699992 383562.2954441309 > 0:00:00:06.555)" > > FloatArray is not the precision I need. But it is over 18x faster. > > I am afraid I must be doing something badly wrong. Python/Numpy is > over > 4x faster than FloatArray for the above. > > If I am using Smallapack incorrectly please help. > > Any help greatly appreciated. > > Thanks. > >

May 20, 2019

Re: [Pharo-dev] FloatArray

by Nicolas Cellier

Hi Jimmie, effectively I did not subsribe... Having efficient methods for sliding window average is possible, here is how I would do it: "Create a vector with 100,000 rows filles with random values (uniform distrubution in [0,1]" v := LapackDGEMatrix randUniform: #(100000 1). "extract values from rank 10001 to 20000" w1 := v atIntervalFrom: 10001 to: 20000 by: 1. "create a left multiplier matrix for performing average of w1" a := LapackDGEMatrix nrow: 1 ncol: w1 nrow withAll: 1.0 / w1 size. "get the average (this is a 1x1 matrix from which we take first element)" avg1 := (a * w1) at: 1. [ "select another slice of same size" w2 := v atIntervalFrom: 15001 to: 25000 by: 1. "get the average (we can recycle a)" avg2 := (a * w2) at: 1 ] bench. This gives: '16,500 per second. 60.7 microseconds per run.' versus: [w2 sum / w2 size] bench. '1,100 per second. 908 microseconds per run.' For max and min, it's harder. Lapack/Blas only provide max of absolute value as primitive: [w2 absMax] bench. '19,400 per second. 51.5 microseconds per run.' Everything else will be slower, unless we write new primitives in C and connect them... [w2 maxOf: [:each | each]] bench. '984 per second. 1.02 milliseconds per run.' Le dim. 19 mai 2019 Ã 14:58, Jimmie <jlhouchin(a)gmail.com> a Ã©crit : > On 5/16/19 1:26 PM, Nicolas Cellier wrote:> Any feedback on this? > > Did someone tried to use Smallapack in Pharo? > > Jimmie? > > > > I am going to guess that you are not on pharo-users. My bad. > I posted this in pharo-users as I it wasn't Pharo development question. > > I probably should have posted here or emailed you directly. > > All I really need is good performance with a simple array of floats. No > matrix math. Nothing complicated. Moving Averages over a slice of the > array. A variety of different averages, weighted, etc. Max/min of the > array. But just a single simple array. > > Any help greatly appreciated. > > Thanks. > > > On 4/28/19 8:32 PM, Jimmie Houchin wrote: > Hello, > > I have installed Smallapack into Pharo 7.0.3. Thanks Nicholas. > > I am very unsure on my use of Smallapack. I am not a mathematician or > scientist. However the only part of Smallapack I am trying to use at the > moment is something that would be 64bit and compare to FloatArray so > that I can do some simple accessing, slicing, sum, and average on the > array. > > Here is some sample code I wrote just to play in a playground. > > I have an ExternalDoubleArray, LapackDGEMatrix, and a FloatArray > samples. The ones not in use are commented out for any run. > > fp is a download from > http://ratedata.gaincapital.com/2018/12%20December/EUR_USD_Week1.zip > and unzipped to a directory. > > fp := '/home/jimmie/data/EUR_USD_Week1.csv' > index := 0. > pricesSum := 0. > asum := 0. > ttr := [ > lines := fp asFileReference contents lines allButFirst. > a := ExternalDoubleArray new: lines size. > "la := LapackDGEMatrix allocateNrow: lines size ncol: 1. > a := la columnAt: 1." > "a := FloatArray new: lines size." > lines do: [ :line || parts price | > parts := ',' split: line. > index := index + 1. > price := Float readFrom: (parts last). > a at: index put: price. > pricesSum := pricesSum + price. > (index rem: 100) = 0 ifTrue: [ > asum := a sum. > ]]] timeToRun. > { index. pricesSum. asum. ttr }. > "ExternalDoubleArray an Array(337588 383662.5627699992 > 383562.2956199993 0:00:01:59.885)" > "FloatArray an Array(337588 383662.5627699992 383562.2954441309 > 0:00:00:06.555)" > > FloatArray is not the precision I need. But it is over 18x faster. > > I am afraid I must be doing something badly wrong. Python/Numpy is over > 4x faster than FloatArray for the above. > > If I am using Smallapack incorrectly please help. > > Any help greatly appreciated. > > Thanks. > > >

May 20, 2019

[Pharo 8.0] Build #280: 3369-Context-should-not-depend-on-Halt

by ci-pharo-ci-jenkins2＠inria.fr

There is a new Pharo build available! The status of the build #280 was: FAILURE. The Pull Request #3372 was integrated: "3369-Context-should-not-depend-on-Halt" Pull request url: https://github.com/pharo-project/pharo/pull/3372 Issue Url: https://github.com/pharo-project/pharo/issues/3369 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

May 20, 2019