- Pharo-dev - lists.pharo.org

Re: [Pharo-dev] [Vm-dev] Re: [ANN] Pharo bootstrap

by Eliot Miranda

Hi Guille, On Wed, Jan 20, 2016 at 4:52 AM, Guillermo Polito <guillermopolito(a)gmail.com > wrote: > > Well, there is no formal specificationâ¦ But I could summarize the features > as follows (and as Christophe points mostly out) > > OzVM supports having two images in logically separated spaces. This > separation is achieved by using the free bit in the object header. Thus we > support only two spaces by now. > > - The main addition is actually a new primitive: > #resumeFromSpecialObjectsArray that receives an special objects array as > argument and: > - resumes the execution from the active process of such array > - on context switch, if the VM is running from a second special > objects array, it will return to the first one instead. > > - fixes to primitives/bytecodes that assume a single special objects > array. e.g., > - #someObject and #nextObject should only iterate objects from the > correct âspaceâ > - #isNil comparisons should take the correct nil > - the GC should set the correct nil object on Weak containers > > The extensions I made are about 20 overrides to StackPrimitive and > NewObjectMemory methods. > > The rest is implemented completely on image side. We use mirror primitives > to manipulate objects from other space (as each image/space has itâs own > selector table). > > I have in my long TODO list see if the "clever hackâ I did can be > supported in a nice manner on top of Spurâs segmented memory. However, I > should stop commencing new projects and start finishing them :P. > Indeed, I can join you in wanting things to work first :-). I want to respond to both sketch how you could port the architecture to Spur, but also suggest what I think is a much more attractive alternative. First, how to support two spaces under Spur or Cog Spur. Spur's memory map looks like a low segment, followed by any number of segments higher in memory. The first segment is composed of several spaces and is allocated at startup. Subsequent segments are obtained by mmap and the only requirement is that they be at higher addresses than the first segment, so star-up goes to some effort to obtain a suitably sized chunk of memory at as low as possible an address. In Cog Spur the first segment looks like this, from low to high: 1. a code zone holding the jit's machine code, any size up to 16Mb, but 1Mb by default. 2. an object zone holding Spur's new space, an eden and two small survivor spaces for a classical generation scavenger. It can be of any size up to 1Gb but is 4Mb by default, with eden being 5/7th and each survivor space being 1/7th of the space. 3. the object zone holding the first old space segment. This is big enough to hold the loaded image plus a free chunk from which new old space objects (e.g. objects tenured from new space) are allocated. The Spur interpreter simply omits the code zone. Now the placing of eden beneath the first old space segment is "baked in". The store check checks for new objects being stored into old objects, since the old objects must be added to the remembered table (which lives in old space). The first object in the first old space segment is nil, and the store check checks for objects less than nil being stored into objects greater than or equal to nil. Inside the Spur memory manager nilObject, the variable that holds onto nil, is a variable, not a constant, and so can be changed, e.g. when switching between two sets of spaces. Inside machine code, nil is a constant, referred to directly from machine code. So in having two object spaces one approach that seems feasible is to have two initial segments, each with distinct code zones, edens, and first old space segments: low: code zone for space 1; new space for space 1; first old space segment for space 1; code zone for space 2; new space for space 2; first old space segment for space 2; high which would be very easy to switch between, but would cause problems for the store check since objects in new space for space 2 appear greater than space 1's nil. So a refinement would be to organize the space like this: low: code zone for space 1; code zone for space 2; new space for space 1; new space for space 2; first old space segment for space 1; first old space segment for space 2; high and always use space 1's nil for the store check. You still need to consult both remembered sets during scavenging to find all the roots, but it would seem feasible. The VM would need two CogMethodZones, and your swap primitive would need to exchange them. The segment manager could mark old space segments as belonging to either space 1 or space 2, and you could add a snapshot primitive that would snapshot only space 2. I'm sure there are lots of other problems but I expect you could make this work. However, I think there's a /much/ nicer architecture, and I use it myself for the Spur bootstrap both from the V3 memory manager you're working with (NewObjectMemory) to Spur 32-bit, and from Spur 32-bit to Spur 64-bit. And that is to use the VM simulator and mirrors. In the VM simulator one has either a JIT or the Stack Interpreter. But we can eliminate the JIT because simularting machine code is slower than the Stack Interpreter, so the fastest execution engine in the simulator is the StackInterpreter. And please suspend your disbelief as to this simulator being fast enough for work. I will address that later on. First let's look at the architecture. In the simulator, the heap is represented by a single ByteArray "memory", but I'll call "heapMemory" to avoid confusion. So in a Spur StackInterpreter the start of heapMemory is new space, followed immediately by the first old space segment, whose first object is nil. When the simulator grows memory by adding new segments it grows heapMemory, and leaves a gap between the end of what was the last segment and the new highest last segment. So through heapMemory one can access any object in the space. The simulator contains a limited set of mirror objects right now, but these can be extended. But currently, for example, there are mirror objects that can be attached to "methods" in heapArray (which are actually just sequences of bytes) and these mirrors make those sequences of bytes appear to be real CompiledMethod instances in the host and hence allow the host to e.g. decompile them or print their bytecodes. For example, this is SmalltalkImage>>at:ifAbsent: in a Squeak image in the simulator's heap pretty printed by the hosts's InstructionPrinter: 17 <00> pushRcvr: 0 18 <10> pushTemp: 0 19 <11> pushTemp: 1 20 <F0> send: a VMObjectProxy for #at:ifAbsent: (2 args) 21 <7C> returnTop So with suitable mirrors one can access the sequences of bytes in heapMemory as if they were objects. The reverse would be possible, where a special kind of proxy in heapMemory would cause the simulator to escape back out to the host and send messages to the host system, but I've not done this. [The other kind of proxy I use is one that takes a host object and makes it appear to be a sequence of bytes. This allows for example, the Cogit to JIT a method in the host system to heapMemory to test the Cogit compiler without having to start the simulator. But that's not useful to you.] An example of the use of the simulator for bootstrapping is in converting a V3 image to a Spur image. Two simulators are created, one for the V3 image and one, initially empty, for the Spur image. A conversion pass is run which clones the relevant objects from the V3 heap to the Spur heap. Not all objects get cloned; for example Character objects in V3 get replaced by immediate Character objects in Spur. Interesting things happen when moving methods. In V3 a method's primitive number is embedded in the header, but in Spur there is a one but flag that identifies methods with a primitive, and the first bytecode is a 3-byte CallPrimitive bytecode if there is a primitive. So cloning methods with primitives requires allocating three extra bytes and inserting the CallPrimitive bytecode at the start of the method. That's an example of a simple transformation. But a number of methods in Spur, for object allocation, object enumeration (allObjects, allInstances, etc) and indeed compiled methods, are different and so we need to compile the correct code for these methods since they don't, indeed can't exist in V3, because they're incompatible with V3. So what we do is a) compile from source in the host to a CompiledMethod in the host b) use the disassembler I wrote as part of my MethodMassage assembler I wrote to generate assembly (a sequence of Message objects, one per bytecode with the same signatures used in Context's interpretation messages such as pushReceiverVariable: etc, but you could use Marcus' assembler too) c) process the set of literals to map them into proxies for objects in the Spur heapMemory. d) use the assembler in MethodMassage to generate a new CompiledMethod e) clone this into the Spur heapMemory Up until now we haven't needed to run /any/ code in the Spur image. But in cloning, given that Spur has a 22-bit per-object identityHash and V3 has only an 11-bit identityHash we at least need to rehash all hashed collections. To make this convenient the simulator is extended to provide a perform:-like abstraction that allows us to send messages to specific objects in the heap and have them executed. The simulator provides object:perform:withArguments: and uses its bytecode interpreter to execute methods. If we wanted to evaluate arbitrary expressions we could compile a doit to a CompiledMethod, clone the method into heapMemory and provide e.g. object:withArgs:executeMethod:. So with this approach - the host is given god-like powers to reach inside the target heap and alter whatever it likes. the target system doesn't have to be complete, or capable of execution. - the target can still self-organise, being able to execute using the simulator's StackInterpreter - no special VM support is needed; you get to use a normal Cog (or Spur Cog) VM for the host running at full speed - you can deal with 64-bits from 32-bits or 32-bits from 64-bits; there is no relationship between word size in the host and word size in the target, beyond the fact that bytecode pcs are affected by the width of literals, so in a one literal method (methods also have a one word header) the first pc is 8 in 32-bits and 16 in 64-bits. Now, the simulator is slooooooow. Even so (IIRC) the V3 to Spur bootstrap takes about 10 minutes and the 32-bit Spur to 64-bit Spur bootstrap takes about 2 minutes. But the StackInterpreter is slow because all of the code is full of expensive error-checking asserts. I bet you could speed up the StackInterpreter simulator by at least an order of magnitude by using a special version of the bytecode compiler (e.g. Opal) that recompiled all of StackInterpreter, SpurMemoryManager et al to eliminate these asserts. Earlier you've claimed that the difference between the StackInterpreter and Cog is about a factor of two. That's a big under estimate. While the ration doers depend on how much work is being done in Smalltalk vs how much work is done external to the system (since Cog only speeds up Smalltalk code) if you're talking about pure Smalltalk code the difference is more like 5 to 15 times faster. So I think if you use Cog Spur and recompile without asserts you've be able to get a simulated StackInterpreter that was, say, a hundred to ten times sower than the (non-Oz) Stack VM, and depending on how much computation needs to be done in the host, you'd find performance was /better/ in this architecture than in the Oz multiple spaces VM. Remember that ClÃ©ment is stabilizing Sista and that will give us another factor of 3 performance boost for pure Smalltalk from Cog Spur. Sista is well suited to optimizing the kinds of loops that exist in the simulator's StackInterpreter, so that code should be well-optimized, so if my estimate was correct that would mean three to thirty times slower than the Stack VM. And it means you get out of the "hack and maintain a VM" business and focus on the bootstrap. When you focus on the bootstrap using the above architecture - the target system *doesn't even have to have a compiler*, since the host can be used to compile all source, or /any/ tools at all - the target system *doesn't have to have a complete implementation of self reflection*. While it still needs classes CompiledMethod, Behavior, ClassDescription, MethodDictionary, etc, these don't have to provide development-time methods such as CompiledMethod class>>newBytes:trailerBytes:nArgs:nTemps:nStack:nLits:primitive:, or ClassDescription>>addSelector:withMethod:notifying:. The target only needs to support what the target needs to do. If all you want is Transcript show: 'Hello world' a lot can be left out, and images below 1Mb are feasible. Let me ask you to at least think about this before you respond and dismiss it. I've been using it for a couple of years now as it was key to the V3 to Spur transition, and I like it and can see that with the right mirrors it can be very powerful. Doru, Clement and I are intrigued by the possibilities of combining mirrors with GT ti provide really good tools for visualizing and manipulating objects in heapMemory. There could be real synergy of the Oz bootstrap took a similar approach. I think you lose a lot of complexity and maintainance activity and gain a lot of power. Worth thinking about. HTH > On 20 ene 2016, at 9:03 a.m., Christophe Demarey < > Christophe.Demarey(a)inria.fr> wrote: > > Hi Eliot, > > Le 19 janv. 2016 Ã 19:29, Eliot Miranda a Ã©crit : > > Hi All, > > great news! Where can I read a specification of the Oz VM facilities? > > > I do not know all the details of the Oz VM but basically, it is a standard > stack interpreter vm specialized to be able to run 2 images at the same > time on top of it. > Guillermo made it possible by using one available bit in the object header > of objects to mark the ownership of an object (e.g. is my object from > image1 or image2?). Then, he mainly had to specialize VM primitives dealing > with objects retrieval from memory. By example, he had to modify the > garbage collector to set the right nil instance (yes, we have 2 images so 2 > nil instances. we need to take the one of the active image) when an object > is garbage collected; the primitive someObject has to return an object from > the active image, etc. > There is also a way to switch execution from an image to the other just by > switching the special objects array reference. > > You can find some information in: > https://guillep.github.io/files/publications/Poli15Thesis.pdf. > The Oz code is in http://smalltalkhub.com/#!/~Guille/ObjectSpace and in > https://github.com/guillep/OzVM > The current implementation uses Cog 6.6.1and OzVM-GuillermoPolito.22. > I do not know if Guille has a more formal specification of the Oz VM. > > If you have advices on what is the best way to handle two distinct object > (memory) spaces in Spur, they will be welcomed :) > > Cheers, > Christophe > > > _,,,^..^,,,_ (phone) > > On Jan 19, 2016, at 6:29 AM, Christophe Demarey < > christophe.demarey(a)inria.fr> wrote: > > Hi all, > > In case you do not know, we work on bootstrapping Pharo, i.e. create a > Pharo image from sources, not based on a previous image (well, we use a > pharo image to produce it but no code / state from it). > > This process will allow to define a minimal Pharo kernel (currently 52 > packages but we could have it far smaller) and to modularize the whole > image (currently packages have too much dependencies on packages already > loaded into the image). > The bootstrap process also allows to write down the recipe to initialize a > new image from scratch (some code is missing in the image or is wrong). In > addition, I think we will clean a lot of historical objects that are not > used anymore. > > With the amazing work done by Guillermo Polito during his Phd (around > Espell, Oz): https://guillep.github.io/files/publications/Poli15Thesis.pdf > , *we succeeded to get a first prototype of a bootstraped Pharo 5 image > (from 5.392)*. > This prototype is able to run an eval command line handler and to log > output / errors. Not all classes are yet initialized and you cannot yet > save / restart this image but it is a big step forward. > It is a 4 mb image (could be half the size without unicode data). You can > download it at: > http://chercheurs.lille.inria.fr/~demarey/pmwiki/pub/pharo-bootstrap/pharo-… > . > > Next steps are to have a bootstrapped image fully working, then to load > packages on top of it (like network, sunit) to produce a minimal image. > Then, we need to implement an Oz VM on top of Spur. > After that, we need to work on a reliable way to build the bootstrap (not > too sensitive to changes in the image). > > Christophe. > > ------- > demarey@193-51-236-143:~/dev/rmod/bootstrap/bootstrap-2016-01-19$ > ../pharo bootstrap.image --no-default-preferences eval "1 + 1" > 2 > demarey@193-51-236-143:~/dev/rmod/bootstrap/bootstrap-2016-01-19$ > ../pharo bootstrap.image --no-default-preferences eval "'a' , 'b'" > 'ab' > demarey@193-51-236-143:~/dev/rmod/bootstrap/bootstrap-2016-01-19$ > ../pharo bootstrap.image --no-default-preferences eval "1 / 0" > ZeroDivide > SmallInteger>>/ > UndefinedObject>>DoIt > OpalCompiler>>evaluate > OpalCompiler(AbstractCompiler)>>evaluate: > SmalltalkImage>>evaluate: > > EvaluateCommandLineHandler>>no (source is Undeclared) > no source in EvaluateCommandLineHandler>>evaluate: in Block: no source > BlockClosure>>on:do: > EvaluateCommandLineHandler>>evaluate: > EvaluateCommandLineHandler>>evaluateArguments > EvaluateCommandLineHandler>>activate > EvaluateCommandLineHandler class(CommandLineHandler class)>>activateWith: > > BasicCommandLineHandler>>no (source is Undeclared) > no source in > PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand: in > Block: no source > BlockClosure>>on:do: > PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand: > PharoCommandLineHandler(BasicCommandLineHandler)>>handleSubcommand > PharoCommandLineHandler(BasicCommandLineHandler)>>handleArgument: > > BasicCommandLineHandler>>no (source is Undeclared) > no source in PharoCommandLineHandler(BasicCommandLineHandler)>>activate in > Block: no source > BlockClosure>>on:do: > PharoCommandLineHandler(BasicCommandLineHandler)>>activate > PharoCommandLineHandler>>activate > PharoCommandLineHandler class(CommandLineHandler class)>>activateWith: > > PharoCommandLineHandler class>>no (source is Undeclared) > no source in PharoCommandLineHandler class>>activateWith: in Block: no > source > NonInteractiveUIManager(UIManager)>>defer: > PharoCommandLineHandler class>>activateWith: > no source in BasicCommandLineHandler>>activateSubCommand: in Block: no > source > BlockClosure>>on:do: > BasicCommandLineHandler>>activateSubCommand: > BasicCommandLineHandler>>handleSubcommand > BasicCommandLineHandler>>handleArgument: > no source in BasicCommandLineHandler>>activate in Block: no source > > SmallInteger>>no (source is Undeclared) > > UndefinedObject>>no (source is Undeclared) > > AbstractCompiler>>no (source is Undeclared) > > SmalltalkImage>>no (source is Undeclared) > > BlockClosure>>no (source is Undeclared) > > EvaluateCommandLineHandler>>no (source is Undeclared) > > EvaluateCommandLineHandler>>no (source is Undeclared) > > CommandLineHandler class>>no (source is Undeclared) > > BasicCommandLineHandler>>no (source is Undeclared) > > BasicCommandLineHandler>>no (source is Undeclared) > > PharoCommandLineHandler>>no (source is Undeclared) > > UIManager>>no (source is Undeclared) > > UndefinedObject>>no (source is Undeclared) > > CommandLineUIManager>>no (source is Undeclared) > > SmalltalkImage>>no (source is Undeclared) > > DelayMicrosecondScheduler>>no (source is Undeclared) > > BlockClosure>>no (source is Undeclared) > > SmalltalkImage>>no (source is Undeclared) > > WeakArray class>>no (source is Undeclared) > > > ps: source cannot be displayed because there is no formatter available in > the bootstrap > > _,,,^..^,,,_ best, Eliot

Jan. 22, 2016

Re: [Pharo-dev] Contributing to Pharo

by Sean P. DeNigris

Ben Coman wrote > checkbox for displaying non-dirty packages - so we only display the > short list in the usual case. (??) Ah! That would be very helpful. Particularly annoying is when you commit one of your project's dirty packages, the list auto-scrolls to the package's new location among the non-dirty packages, and you have to manually scroll back to the top of the package list to find your next dirty package. ----- Cheers, Sean -- View this message in context: http://forum.world.st/Contributing-to-Pharo-tp4871604p4873422.html Sent from the Pharo Smalltalk Developers mailing list archive at Nabble.com.

Jan. 22, 2016

Re: [Pharo-dev] [squeak-dev] Re: Smalltalk website tricks

by Dimitris Chloupis

yeap this is very cool :) On Fri, Jan 22, 2016 at 6:42 PM Simon Michael <simon(a)joyful.com> wrote: > Hi Craig, > > since noone has mentioned it yet: this is really slick! :) > > Just need to fix the scary db upgrade alert on first visit, and the stop > the automatic zoom-out on page load. > > >

Jan. 22, 2016

Re: [Pharo-dev] How to manage GitFileTree and being integrated in-image (QualityAssistant example?)

by Thierry Goubier

2016-01-22 17:22 GMT+01:00 Mariano Martinez Peck <marianopeck(a)gmail.com>: > > > On Fri, Jan 22, 2016 at 11:50 AM, Thierry Goubier < > thierry.goubier(a)gmail.com> wrote: > >> Hi Mariano, >> >> this is a common question for external projects integrated inside the >> Pharo image. And we have an issue with version numbers, but let's try to >> keep that separate. >> >> Fixes to the code of external projects integrated inside Pharo should be >> done upstream (on the external project itself), not in the Pharo image. >> This is what is currently happening with the GT tools, NeoJSON, Zinc, and >> probably a few more. So, as a maintainer of such a projects in github, say, >> you can ask people to create issues on your project, pull requests and the >> like, and this is the only way bugs found in Pharo in your release project >> should be corrected. Then, everytime a new version of the Pharo image is >> built, a version of your project is integrated; and you can add an issue to >> update your project to a newer version inside Pharo. >> > > Well, that covers A PART of the problem. If someone finds a bug or > whatever in MY project, then your workflow sounds perfect. > Now...consider internal refactors of Pharo that affects multiple projects. > For example few months ago, someone changes all senders of #instVarNames to > #instanceVariabls (or something like that...I don't remember the exact > change but something like that). As part of those senders, there was Fuel. > So when that SLICE was integrated (with multiple packages as dependencies > of the SLICE), Fuel package was one of them. > > So what should be the path in this case: > > 1) Ask the poor guy that make the slice to also do the fork, git clone, > install gitfiletree, commit, push and make PR ... > Hum, takes about: - 1 click or two on github for the fork - 1 click on the configuration manager for gitfiletree - 4 lines of metacello for remote clone + repository - 3 clicks and a bit of text for the commit in the fork - two clicks for the push to github - 2 or 3 clicks for the pull request Soon (or even already now?), Skip Github code would allow that without git/gitfiletree. But in github world, you would need a fork anyway. > 2) Myself (as the developer of the tool) get notified when my package gets > changed and then, I take care of doing a diff and manaully "port" the fix > to my upstream project? > Probably this one. Technically, it is easy to: get the latest image; get the gitfiletree repository; create a branch at the previous stable version of the project; save the changed packages into that branch; then decide (git merge?) those changes into either a new stable version or on a development branch. Git will take care of the difference between your new stuff and the stuff changed in Pharo, and merge properly unless both sides have changed the same method / line in a method. I don't expect this sort of changes to occur very often. As you say, this is a particular use case, with a large number of packages changed, so I would consider that a rare occurrence for which I don't have to specially optimize the process, just to have it possible. Smaller fixes should be done the 1) way. > In either case, just to confirm, we do NOT do fetch/push because of the > versions problem right? > I mean...it will be either me or another guy (the guy that created the > issue), but one of us will finally end up putting the "changes" (not a MC > version) in the upstream whatever ways are taking for that (via PR or > whatever) ? > Yes, but the push will be a MC version anyway? I don't understand; using git means that you can just save and push versions, and git will determine what the diff is... > (Was I clear with that description? Feel free to ask or correct me :)) >> >> Now, about the package versions. There is an issue with metadata-less >> mode and a few quirks about the way Metacello check versions to upgrade >> packages, and the issue is open. Two ways forward are possible: David >> Allouche pointed one by saying ordering between versions (without checking >> the numbers) can be resolved by checking if one is an ancestor of the >> other... and the other is that, with Skip work on the github api, it >> becomes possible(*) to retrieve the version info from github without git >> and avoid those -Cypress.1. >> >> > OK that would very cool. > Yes, I think so too. Thierry

Jan. 22, 2016

Re: [Pharo-dev] [ANN] Pharo bootstrap

by Eliot Miranda

Hi Gille, I'll respond to the two object spaces message next, but saw the point about AST interprretation and I have a suggestion On Wed, Jan 20, 2016 at 4:29 AM, Guillermo Polito <guillermopolito(a)gmail.com > wrote: > > On 20 ene 2016, at 9:08 a.m., Christophe Demarey < > Christophe.Demarey(a)inria.fr> wrote: > > Hi Pavel, > > Le 19 janv. 2016 Ã 19:53, Pavel Krivanek a Ã©crit : > > Hi, > > amazing! Do you have any idea how to speed up it? The bootstrap process is > now running on my machine about one and half hour and it is still far from > finish. > > > The process is indeed far too long (takes around 10 hours) on the CI > server. > Reasons are: > - we use a stack interpreter VM > - we modified it and is a bit slower than a classical stack VM > > > Not quite so. My measurements did not show thatâ¦ But I can understand the > feeling as the StackVM is in general half as fast as the CogVM, which is > the VM we are used to use since years. > > - we use AST interpretation to build the bootstrap and it is very slow. > Guille already did some speed improvements by avoiding to interpret loops > by example. > > I did not yet spend time on this point because I first wanted to have > something working. > Definitely, this problem will be tackled when we will put in production > the bootstrap. > > > We should really measure because I see three main aspects: > > 1) class creation (executes the class builder using AST interpretation) > 2) method compilation > 3) method installation (using AST interpretation to respect trait copying) > > My feeling (from what I observe only) is that most of the time is consumed > in 2) and 3), and that specially it is in 3). > The AST interpretation seems to me easily replaced by bytecode interpretation that should be much faster. If you added a subclass of Context, say OzInstallationInterpreter, this could override all methods that make direct inst var access, such as Context methods for instruction decoding pushReceiverVariable: offset "Simulate the action of bytecode that pushes the contents of the receiver's instance variable whose index is the argument, index, on the top of the stack." self push: (self object: self receiver instVarAt: offset + 1) with ones that map back from inst var offsets to inst var names, e.g. OzInstallationInterpreter methods for instruction decoding pushReceiverVariable: offset "Simulate the action of bytecode that pushes the contents of the receiver's instance variable whose index is the argument, index, on the top of the stack. Override to ensure that the offset of the named inst var is used." self push: (self object: self receiver instVarNamed: (self mapInstVarOffsetToName: offset + 1)) You might even be able to do this just in object:instVarAt:. But if you move away from AST interpretation you save both the overhead of interpreting the AST /and/ the cost of parsing the method to the AST, which I presume is significant, and can simply use the methods extant in the system. > And I particularly want to see how the growing of collections perform. > > > Cheers, > Christophe > > > Cheers, > -- Pavel > > 2016-01-19 15:29 GMT+01:00 Christophe Demarey <christophe.demarey(a)inria.fr > >: > >> Hi all, >> >> In case you do not know, we work on bootstrapping Pharo, i.e. create a >> Pharo image from sources, not based on a previous image (well, we use a >> pharo image to produce it but no code / state from it). >> >> This process will allow to define a minimal Pharo kernel (currently 52 >> packages but we could have it far smaller) and to modularize the whole >> image (currently packages have too much dependencies on packages already >> loaded into the image). >> The bootstrap process also allows to write down the recipe to initialize >> a new image from scratch (some code is missing in the image or is wrong). >> In addition, I think we will clean a lot of historical objects that are not >> used anymore. >> >> With the amazing work done by Guillermo Polito during his Phd (around >> Espell, Oz): >> https://guillep.github.io/files/publications/Poli15Thesis.pdf, *we >> succeeded to get a first prototype of a bootstraped Pharo 5 image (from >> 5.392)*. >> This prototype is able to run an eval command line handler and to log >> output / errors. Not all classes are yet initialized and you cannot yet >> save / restart this image but it is a big step forward. >> It is a 4 mb image (could be half the size without unicode data). You can >> download it at: >> http://chercheurs.lille.inria.fr/~demarey/pmwiki/pub/pharo-bootstrap/pharo-… >> . >> >> Next steps are to have a bootstrapped image fully working, then to load >> packages on top of it (like network, sunit) to produce a minimal image. >> Then, we need to implement an Oz VM on top of Spur. >> After that, we need to work on a reliable way to build the bootstrap (not >> too sensitive to changes in the image). >> >> Christophe. >> >> ------- >> demarey@193-51-236-143:~/dev/rmod/bootstrap/bootstrap-2016-01-19$ >> ../pharo bootstrap.image --no-default-preferences eval "1 + 1" >> 2 >> demarey@193-51-236-143:~/dev/rmod/bootstrap/bootstrap-2016-01-19$ >> ../pharo bootstrap.image --no-default-preferences eval "'a' , 'b'" >> 'ab' >> demarey@193-51-236-143:~/dev/rmod/bootstrap/bootstrap-2016-01-19$ >> ../pharo bootstrap.image --no-default-preferences eval "1 / 0" >> ZeroDivide >> SmallInteger>>/ >> UndefinedObject>>DoIt >> OpalCompiler>>evaluate >> OpalCompiler(AbstractCompiler)>>evaluate: >> SmalltalkImage>>evaluate: >> >> EvaluateCommandLineHandler>>no (source is Undeclared) >> no source in EvaluateCommandLineHandler>>evaluate: in Block: no source >> BlockClosure>>on:do: >> EvaluateCommandLineHandler>>evaluate: >> EvaluateCommandLineHandler>>evaluateArguments >> EvaluateCommandLineHandler>>activate >> EvaluateCommandLineHandler class(CommandLineHandler class)>>activateWith: >> >> BasicCommandLineHandler>>no (source is Undeclared) >> no source in >> PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand: in >> Block: no source >> BlockClosure>>on:do: >> PharoCommandLineHandler(BasicCommandLineHandler)>>activateSubCommand: >> PharoCommandLineHandler(BasicCommandLineHandler)>>handleSubcommand >> PharoCommandLineHandler(BasicCommandLineHandler)>>handleArgument: >> >> BasicCommandLineHandler>>no (source is Undeclared) >> no source in PharoCommandLineHandler(BasicCommandLineHandler)>>activate >> in Block: no source >> BlockClosure>>on:do: >> PharoCommandLineHandler(BasicCommandLineHandler)>>activate >> PharoCommandLineHandler>>activate >> PharoCommandLineHandler class(CommandLineHandler class)>>activateWith: >> >> PharoCommandLineHandler class>>no (source is Undeclared) >> no source in PharoCommandLineHandler class>>activateWith: in Block: no >> source >> NonInteractiveUIManager(UIManager)>>defer: >> PharoCommandLineHandler class>>activateWith: >> no source in BasicCommandLineHandler>>activateSubCommand: in Block: no >> source >> BlockClosure>>on:do: >> BasicCommandLineHandler>>activateSubCommand: >> BasicCommandLineHandler>>handleSubcommand >> BasicCommandLineHandler>>handleArgument: >> no source in BasicCommandLineHandler>>activate in Block: no source >> >> SmallInteger>>no (source is Undeclared) >> >> UndefinedObject>>no (source is Undeclared) >> >> AbstractCompiler>>no (source is Undeclared) >> >> SmalltalkImage>>no (source is Undeclared) >> >> BlockClosure>>no (source is Undeclared) >> >> EvaluateCommandLineHandler>>no (source is Undeclared) >> >> EvaluateCommandLineHandler>>no (source is Undeclared) >> >> CommandLineHandler class>>no (source is Undeclared) >> >> BasicCommandLineHandler>>no (source is Undeclared) >> >> BasicCommandLineHandler>>no (source is Undeclared) >> >> PharoCommandLineHandler>>no (source is Undeclared) >> >> UIManager>>no (source is Undeclared) >> >> UndefinedObject>>no (source is Undeclared) >> >> CommandLineUIManager>>no (source is Undeclared) >> >> SmalltalkImage>>no (source is Undeclared) >> >> DelayMicrosecondScheduler>>no (source is Undeclared) >> >> BlockClosure>>no (source is Undeclared) >> >> SmalltalkImage>>no (source is Undeclared) >> >> WeakArray class>>no (source is Undeclared) >> >> >> ps: source cannot be displayed because there is no formatter available in >> the bootstrap >> >> > > > -- _,,,^..^,,,_ best, Eliot

Jan. 22, 2016

Re: [Pharo-dev] [pharo-project/pharo-core] fef09a: 50540

by Christophe Demarey

Le 22 janv. 2016 Ã 17:08, Ben Coman a Ã©crit : > On Fri, Jan 22, 2016 at 11:26 PM, GitHub <noreply(a)github.com> wrote: >> Branch: refs/heads/5.0 >> Home: https://github.com/pharo-project/pharo-core >> Commit: fef09a7c252f92e255c5053927295a61d16b8395 >> https://github.com/pharo-project/pharo-core/commit/fef09a7c252f92e255c50539… >> Author: Jenkins Build Server <board(a)pharo-project.org> >> Date: 2016-01-22 (Fri, 22 Jan 2016) > >> Log Message: >> ----------- >> 50540 >> Pharo >> >> http://files.pharo.org/image/50/50540.zip > > What are the issue numbers associated with this integration?? Case 17446: Add registration/unregistration to/from session manager

Jan. 22, 2016

Re: [Pharo-dev] How to manage GitFileTree and being integrated in-image (QualityAssistant example?)

by Mariano Martinez Peck

On Fri, Jan 22, 2016 at 11:50 AM, Thierry Goubier <thierry.goubier(a)gmail.com > wrote: > Hi Mariano, > > this is a common question for external projects integrated inside the > Pharo image. And we have an issue with version numbers, but let's try to > keep that separate. > > Fixes to the code of external projects integrated inside Pharo should be > done upstream (on the external project itself), not in the Pharo image. > This is what is currently happening with the GT tools, NeoJSON, Zinc, and > probably a few more. So, as a maintainer of such a projects in github, say, > you can ask people to create issues on your project, pull requests and the > like, and this is the only way bugs found in Pharo in your release project > should be corrected. Then, everytime a new version of the Pharo image is > built, a version of your project is integrated; and you can add an issue to > update your project to a newer version inside Pharo. > Well, that covers A PART of the problem. If someone finds a bug or whatever in MY project, then your workflow sounds perfect. Now...consider internal refactors of Pharo that affects multiple projects. For example few months ago, someone changes all senders of #instVarNames to #instanceVariabls (or something like that...I don't remember the exact change but something like that). As part of those senders, there was Fuel. So when that SLICE was integrated (with multiple packages as dependencies of the SLICE), Fuel package was one of them. So what should be the path in this case: 1) Ask the poor guy that make the slice to also do the fork, git clone, install gitfiletree, commit, push and make PR ... 2) Myself (as the developer of the tool) get notified when my package gets changed and then, I take care of doing a diff and manaully "port" the fix to my upstream project? In either case, just to confirm, we do NOT do fetch/push because of the versions problem right? I mean...it will be either me or another guy (the guy that created the issue), but one of us will finally end up putting the "changes" (not a MC version) in the upstream whatever ways are taking for that (via PR or whatever) ? > > (Was I clear with that description? Feel free to ask or correct me :)) > > Now, about the package versions. There is an issue with metadata-less mode > and a few quirks about the way Metacello check versions to upgrade > packages, and the issue is open. Two ways forward are possible: David > Allouche pointed one by saying ordering between versions (without checking > the numbers) can be resolved by checking if one is an ancestor of the > other... and the other is that, with Skip work on the github api, it > becomes possible(*) to retrieve the version info from github without git > and avoid those -Cypress.1. > > OK that would very cool. > Thierry > > * There is a bit of code to write, of course, but most of it is reusing > what already exists inside Skip github and GitFileTree. > > 2016-01-22 14:33 GMT+01:00 Mariano Martinez Peck <marianopeck(a)gmail.com>: > >> Hi guys, >> >> Let's say there is a project which is being build with metadata-less >> GitFileTree. There is a BaselineOf and a ConfigurationOf which work >> correctly. And ConfigurationOf can perfectly have fixed "versions" that >> could be, at some point, integrated in Pharo. >> >> Let's say I release version 1.0 which is INTEGRATED inside Pharo. When >> Pharo image is build, it uses ConfigurationOfMyApp to load the code and so >> there will be NO history of versions (cypress.1). >> >> Now, as Pharo goes on, there may be changes to that project as part of >> refactors or whatever that happens in-image. So in one months from now, >> Pharo may have a "newer" code than the originally released 1.0. Let's say >> that for the package MyAppPackage were only 3 commits in those 2 months. >> >> At the same time, I have continue working with my project, and I am ready >> to publish 1.1. >> >> Question is.... how do I bring Pharo changes to my own place? >> >> 1) Fetching (from Pharo repo) and pushing to my GitFileTree only the >> versions during those 2 months? I doubt this will work as crappy >> Monticello numbers could have collisions, right? >> >> 2) Doing a poor man diff and cherry picking changes from Pharo repo and >> manually apply them to my own repo? In this case, the "3 commits" of those >> 2 months will be lost as from git history version. >> >> Is there a project doing this?? I know QualityAssistant is close, but he >> does not use metadata-less GitFileTree I think...so I am not sure. >> >> Thoughts? >> >> Thanks! >> >> >> >> -- >> Mariano >> http://marianopeck.wordpress.com >> > > -- Mariano http://marianopeck.wordpress.com

Jan. 22, 2016

Re: [Pharo-dev] [pharo-project/pharo-core] fef09a: 50540

by Ben Coman

On Fri, Jan 22, 2016 at 11:26 PM, GitHub <noreply(a)github.com> wrote: > Branch: refs/heads/5.0 > Home: https://github.com/pharo-project/pharo-core > Commit: fef09a7c252f92e255c5053927295a61d16b8395 > https://github.com/pharo-project/pharo-core/commit/fef09a7c252f92e255c50539… > Author: Jenkins Build Server <board(a)pharo-project.org> > Date: 2016-01-22 (Fri, 22 Jan 2016) > Log Message: > ----------- > 50540 > Pharo > > http://files.pharo.org/image/50/50540.zip What are the issue numbers associated with this integration?? cheers -ben

Jan. 22, 2016

[pharo-project/pharo-core]

by GitHub

Branch: refs/tags/50540 Home: https://github.com/pharo-project/pharo-core

Jan. 22, 2016

[pharo-project/pharo-core] fef09a: 50540

by GitHub

Branch: refs/heads/5.0 Home: https://github.com/pharo-project/pharo-core Commit: fef09a7c252f92e255c5053927295a61d16b8395 https://github.com/pharo-project/pharo-core/commit/fef09a7c252f92e255c50539… Author: Jenkins Build Server <board(a)pharo-project.org> Date: 2016-01-22 (Fri, 22 Jan 2016) Changed paths: M AST-Core.package/ASTCache.class/class/class initialization/initialize.st A AST-Core.package/ASTCache.class/class/class initialization/release.st R Balloon.package/ShortIntegerArray.class/class/initialization/initialize.st R Balloon.package/ShortIntegerArray.class/class/initialization/startUp.st R Balloon.package/ShortIntegerArray.class/class/initialization/swapShortObjects.st A Balloon.package/ShortIntegerArray.class/class/initialize-release/initialize.st A Balloon.package/ShortIntegerArray.class/class/initialize-release/release.st A Balloon.package/ShortIntegerArray.class/class/initialize-release/swapShortObjects.st A Balloon.package/ShortIntegerArray.class/class/system startup/startUp.st R Collections-Strings.package/Symbol.class/class/access/allSymbols.st R Collections-Strings.package/Symbol.class/class/access/selectorsContaining_.st R Collections-Strings.package/Symbol.class/class/access/thatStartsCaseSensitive_skipping_.st R Collections-Strings.package/Symbol.class/class/access/thatStarts_skipping_.st A Collections-Strings.package/Symbol.class/class/accessing/allSymbols.st A Collections-Strings.package/Symbol.class/class/accessing/selectorsContaining_.st A Collections-Strings.package/Symbol.class/class/accessing/thatStartsCaseSensitive_skipping_.st A Collections-Strings.package/Symbol.class/class/accessing/thatStarts_skipping_.st A Collections-Strings.package/Symbol.class/class/cleanup/compactSymbolTable.st R Collections-Strings.package/Symbol.class/class/initialization/allSymbolTablesDo_.st R Collections-Strings.package/Symbol.class/class/initialization/allSymbolTablesDo_after_.st R Collections-Strings.package/Symbol.class/class/initialization/compactSymbolTable.st R Collections-Strings.package/Symbol.class/class/initialization/initialize.st A Collections-Strings.package/Symbol.class/class/initialize-release/initialize.st A Collections-Strings.package/Symbol.class/class/initialize-release/release.st A Collections-Strings.package/Symbol.class/class/iterating/allSymbolTablesDo_.st A Collections-Strings.package/Symbol.class/class/iterating/allSymbolTablesDo_after_.st R Collections-Strings.package/Symbol.class/class/private/shutDown_.st A Collections-Strings.package/Symbol.class/class/system startup/shutDown_.st M Collections-Weak.package/WeakArray.class/class/initialization/initialize.st A Collections-Weak.package/WeakArray.class/class/initialization/release.st A FileSystem-Core.package/FileLocator.class/class/adding/addResolver_.st R FileSystem-Core.package/FileLocator.class/class/class initialization/addResolver_.st R FileSystem-Core.package/FileLocator.class/class/class initialization/flushCaches.st M FileSystem-Core.package/FileLocator.class/class/class initialization/initialize.st A FileSystem-Core.package/FileLocator.class/class/class initialization/release.st R FileSystem-Core.package/FileLocator.class/class/class initialization/startUp_.st A FileSystem-Core.package/FileLocator.class/class/flushing/flushCaches.st A FileSystem-Core.package/FileLocator.class/class/system startup/startUp_.st R FileSystem-Disk.package/DiskStore.class/class/class initialization/checkVMVersion.st M FileSystem-Disk.package/DiskStore.class/class/class initialization/initialize.st A FileSystem-Disk.package/DiskStore.class/class/class initialization/release.st R FileSystem-Disk.package/DiskStore.class/class/class initialization/shutDown_.st R FileSystem-Disk.package/DiskStore.class/class/class initialization/startUp_.st A FileSystem-Disk.package/DiskStore.class/class/system startup/checkVMVersion.st A FileSystem-Disk.package/DiskStore.class/class/system startup/shutDown_.st A FileSystem-Disk.package/DiskStore.class/class/system startup/startUp_.st M Files.package/FileStream.class/class/initialize-release/initialize.st A Files.package/FileStream.class/class/initialize-release/release.st M Files.package/FileStream.class/class/system startup/shutDown_.st M Files.package/FileStream.class/class/system startup/startUp_.st R Files.package/MultiByteFileStream.class/class/class initialization/defaultToCR.st R Files.package/MultiByteFileStream.class/class/class initialization/defaultToCRLF.st R Files.package/MultiByteFileStream.class/class/class initialization/defaultToLF.st R Files.package/MultiByteFileStream.class/class/class initialization/guessDefaultLineEndConvention.st M Files.package/MultiByteFileStream.class/class/class initialization/initialize.st R Files.package/MultiByteFileStream.class/class/class initialization/startUp.st A Files.package/MultiByteFileStream.class/class/defaults/defaultToCR.st A Files.package/MultiByteFileStream.class/class/defaults/defaultToCRLF.st A Files.package/MultiByteFileStream.class/class/defaults/defaultToLF.st A Files.package/MultiByteFileStream.class/class/defaults/guessDefaultLineEndConvention.st A Files.package/MultiByteFileStream.class/class/system startup/startUp.st R Files.package/Stdio.class/class/class initialization/initialize.st A Files.package/Stdio.class/class/initialize-release/initialize.st A Files.package/Stdio.class/class/initialize-release/release.st M FontInfrastructure.package/LogicalFont.class/class/class initialization/initialize.st A FontInfrastructure.package/LogicalFont.class/class/class initialization/release.st R FreeType.package/FT2Handle.class/class/class initialization/initialize.st A FreeType.package/FT2Handle.class/class/initialize-release/initialize.st A FreeType.package/FT2Handle.class/class/initialize-release/release.st R FreeType.package/FT2Handle.class/class/initialize-release/unload.st M FreeType.package/FT2Handle.class/class/system startup/startUp_.st R FreeType.package/FreeTypeCache.class/class/accessing/clearCurrent.st R FreeType.package/FreeTypeCache.class/class/accessing/initialize.st A FreeType.package/FreeTypeCache.class/class/cleanup/clearCurrent.st A FreeType.package/FreeTypeCache.class/class/initialize-release/initialize.st A FreeType.package/FreeTypeCache.class/class/initialize-release/release.st M FreeType.package/FreeTypeCache.class/class/system startup/shutDown_.st M FreeType.package/FreeTypeSettings.class/class/class initialization/initialize.st A FreeType.package/FreeTypeSettings.class/class/class initialization/release.st M FreeType.package/FreeTypeSettings.class/class/system startup/shutDown_.st R Graphics-Display Objects.package/Cursor.class/class/class initialization/initBottomLeft.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initBottomLeft.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initBottomRight.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initCorner.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initCrossHair.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initDown.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initMarker.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initMenu.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initMove.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initNormal.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initNormalWithMask.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initOrigin.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initOverEditableText.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initRead.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initResizeLeft.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initResizeTop.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initResizeTopLeft.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initResizeTopRight.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initRightArrow.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initSquare.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initTarget.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initTopLeft.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initTopRight.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initUp.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initWait.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initWrite.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/initXeq.st A Graphics-Display Objects.package/Cursor.class/class/initialization - private/makeCursorsWithMask.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initBottomRight.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initCorner.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initCrossHair.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initDown.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initMarker.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initMenu.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initMove.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initNormal.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initNormalWithMask.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initOrigin.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initOverEditableText.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initRead.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initResizeLeft.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initResizeTop.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initResizeTopLeft.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initResizeTopRight.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initRightArrow.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initSquare.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initTarget.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initTopLeft.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initTopRight.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initUp.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initWait.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initWrite.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initXeq.st R Graphics-Display Objects.package/Cursor.class/class/initialization/initialize.st R Graphics-Display Objects.package/Cursor.class/class/initialization/makeCursorsWithMask.st R Graphics-Display Objects.package/Cursor.class/class/initialization/startUp.st A Graphics-Display Objects.package/Cursor.class/class/initialize-release/createStandardCursors.st A Graphics-Display Objects.package/Cursor.class/class/initialize-release/initialize.st A Graphics-Display Objects.package/Cursor.class/class/system startup/startUp.st A Graphics-Display Objects.package/DisplayScreen.class/class/accessing/actualScreenDepth.st A Graphics-Display Objects.package/DisplayScreen.class/class/accessing/actualScreenSize.st R Graphics-Display Objects.package/DisplayScreen.class/class/class initialization/initialize.st A Graphics-Display Objects.package/DisplayScreen.class/class/initialize-release/initialize.st R Graphics-Display Objects.package/DisplayScreen.class/class/snapshots/actualScreenDepth.st R Graphics-Display Objects.package/DisplayScreen.class/class/snapshots/actualScreenSize.st R Graphics-Display Objects.package/DisplayScreen.class/class/snapshots/shutDown.st R Graphics-Display Objects.package/DisplayScreen.class/class/snapshots/startUp.st A Graphics-Display Objects.package/DisplayScreen.class/class/system startup/shutDown.st A Graphics-Display Objects.package/DisplayScreen.class/class/system startup/startUp.st A Graphics-Display Objects.package/Form.class/class/initialize-release/initialize.st A Graphics-Display Objects.package/Form.class/class/initialize-release/release.st R Graphics-Display Objects.package/Form.class/class/shut down/shutDown.st A Graphics-Display Objects.package/Form.class/class/system startup/shutDown.st R Graphics-Files.package/extension/Form/class/initialize.st R Graphics-Fonts.package/StrikeFont.class/class/derivative font caching/shutDown.st A Graphics-Fonts.package/StrikeFont.class/class/initialize-release/initialize.st A Graphics-Fonts.package/StrikeFont.class/class/initialize-release/release.st A Graphics-Fonts.package/StrikeFont.class/class/system startup/shutDown.st R Graphics-Primitives.package/Color.class/class/initialization/initialize.st R Graphics-Primitives.package/Color.class/class/initialization/initializeColorRegistry.st R Graphics-Primitives.package/Color.class/class/initialization/initializeGrayToIndexMap.st R Graphics-Primitives.package/Color.class/class/initialization/initializeIndexedColors.st R Graphics-Primitives.package/Color.class/class/initialization/registerColor_named_.st A Graphics-Primitives.package/Color.class/class/initialize-release/initialize.st A Graphics-Primitives.package/Color.class/class/initialize-release/initializeColorRegistry.st A Graphics-Primitives.package/Color.class/class/initialize-release/initializeGrayToIndexMap.st A Graphics-Primitives.package/Color.class/class/initialize-release/initializeIndexedColors.st A Graphics-Primitives.package/Color.class/class/initialize-release/registerColor_named_.st A Graphics-Primitives.package/Color.class/class/initialize-release/release.st R Graphics-Primitives.package/Color.class/class/other/shutDown.st A Graphics-Primitives.package/Color.class/class/system startup/shutDown.st A Kernel.package/Class.class/instance/initialize-release/release.st R Kernel.package/Delay.class/class/class initialization/initialize.st A Kernel.package/Delay.class/class/initialize-release/initialize.st A Kernel.package/Delay.class/class/initialize-release/release.st M Kernel.package/PharoKernelAssembly.class/class/meta-data/parts.st M Kernel.package/ProcessorScheduler.class/class/background process/startUp.st M Kernel.package/ProcessorScheduler.class/class/class initialization/initialize.st A Kernel.package/ProcessorScheduler.class/class/class initialization/release.st R Kernel.package/SmallInteger.class/class/class initialization/initialize.st R Kernel.package/SmallInteger.class/class/class initialization/startUp_.st A Kernel.package/SmallInteger.class/class/initialize-release/initialize.st A Kernel.package/SmallInteger.class/class/initialize-release/release.st A Kernel.package/SmallInteger.class/class/system startup/startUp_.st A Metacello-GitHub.package/MCGitHubRepository.class/class/flushing/flushDownloadCache.st R Metacello-GitHub.package/MCGitHubRepository.class/class/initialization/flushDownloadCache.st A Metacello-GitHub.package/MCGitHubRepository.class/class/initialize-release/initialize.st A Metacello-GitHub.package/MCGitHubRepository.class/class/initialize-release/release.st A Metacello-GitHub.package/MCGitHubRepository.class/class/system startup/startUp_.st M Monticello.package/MCMethodDefinition.class/class/initialization/cachedDefinitions.st M Monticello.package/MCMethodDefinition.class/class/initialization/flushMethodCache.st M Monticello.package/MCMethodDefinition.class/class/initialization/initialize.st A Monticello.package/MCMethodDefinition.class/class/initialization/release.st R Monticello.package/MCMethodDefinition.class/class/initialization/shutDown.st A Monticello.package/MCMethodDefinition.class/class/system startup/shutDown.st A Morphic-Core.package/WorldMorph.class/class/initialize-release/initialize.st A Morphic-Core.package/WorldMorph.class/class/initialize-release/release.st R Multilingual-Languages.package/LanguageEnvironment.class/class/class initialization/localeChanged.st R Multilingual-Languages.package/LanguageEnvironment.class/class/class initialization/startUp.st M Multilingual-Languages.package/LanguageEnvironment.class/class/initialization/initialize.st A Multilingual-Languages.package/LanguageEnvironment.class/class/initialization/release.st A Multilingual-Languages.package/LanguageEnvironment.class/class/system startup/localeChanged.st A Multilingual-Languages.package/LanguageEnvironment.class/class/system startup/startUp.st M NECompletion.package/NOCCompletionTable.class/class/class initialization/initialize.st A NECompletion.package/NOCCompletionTable.class/class/class initialization/release.st R Nautilus.package/Nautilus.class/class/class initialization/registerToolsOn_.st A Nautilus.package/Nautilus.class/class/initialize-release/initialize.st A Nautilus.package/Nautilus.class/class/initialize-release/release.st A Nautilus.package/Nautilus.class/class/tool - registration/registerToolsOn_.st M Network-Kernel.package/InternetConfiguration.class/class/initialization/initialize.st A Network-Kernel.package/InternetConfiguration.class/class/initialization/release.st M Network-UUID.package/UUIDGenerator.class/class/initialization/initialize.st A Network-UUID.package/UUIDGenerator.class/class/initialization/release.st R Network-UUID.package/UUIDGenerator.class/class/initialization/startUp.st A Network-UUID.package/UUIDGenerator.class/class/system startup/startUp.st M NonInteractiveTranscript.package/NonInteractiveTranscript.class/class/class initialization/initialize.st A NonInteractiveTranscript.package/NonInteractiveTranscript.class/class/class initialization/release.st M NonInteractiveTranscript.package/NonInteractiveTranscript.class/class/system startup/shutDown.st A Polymorph-Widgets.package/MorphicUIManager.class/class/testing/isValidForCurrentSystemConfiguration.st R ScriptLoader50.package/ScriptLoader.class/instance/pharo - scripts/script50539.st A ScriptLoader50.package/ScriptLoader.class/instance/pharo - scripts/script50540.st R ScriptLoader50.package/ScriptLoader.class/instance/pharo - updates/update50539.st A ScriptLoader50.package/ScriptLoader.class/instance/pharo - updates/update50540.st M ScriptLoader50.package/ScriptLoader.class/instance/public/commentForCurrentUpdate.st M System-BasicCommandLineHandler.package/BasicCommandLineHandler.class/class/class initialization/initialize.st A System-BasicCommandLineHandler.package/BasicCommandLineHandler.class/class/class initialization/release.st R System-BasicCommandLineHandler.package/BasicCommandLineHandler.class/class/class initialization/startUp_.st A System-BasicCommandLineHandler.package/BasicCommandLineHandler.class/class/system startup/startUp_.st M System-Clipboard.package/Clipboard.class/class/initialization/initialize.st A System-Clipboard.package/Clipboard.class/class/initialization/release.st R System-Clipboard.package/Clipboard.class/class/initialization/shutDown_.st R System-Clipboard.package/Clipboard.class/class/initialization/startUp_.st A System-Clipboard.package/Clipboard.class/class/system startup/shutDown_.st A System-Clipboard.package/Clipboard.class/class/system startup/startUp_.st M System-Finalization.package/WeakFinalizationList.class/class/class initialization/initialize.st A System-Finalization.package/WeakFinalizationList.class/class/class initialization/release.st A System-Localization.package/Locale.class/class/accessing/platformEncodings.st M System-Localization.package/Locale.class/class/initialization/initialize.st R System-Localization.package/Locale.class/class/initialization/platformEncodings.st A System-Localization.package/Locale.class/class/initialization/release.st A System-OSEnvironments.package/OSEnvironment.class/class/initialize-release/initialize.st A System-OSEnvironments.package/OSEnvironment.class/class/initialize-release/release.st A System-OSEnvironments.package/OSEnvironment.class/class/system startup/shutDown_.st R System-OSEnvironments.package/OSEnvironment.class/class/testing/initialize.st R System-OSEnvironments.package/OSEnvironment.class/class/testing/shutDown_.st R System-Platforms.package/OSPlatform.class/class/class initialization/initialize.st R System-Platforms.package/OSPlatform.class/class/class initialization/shutDown_.st R System-Platforms.package/OSPlatform.class/class/class initialization/startUp_.st A System-Platforms.package/OSPlatform.class/class/initialize-release/initialize.st A System-Platforms.package/OSPlatform.class/class/initialize-release/release.st A System-Platforms.package/OSPlatform.class/class/system startup/shutDown_.st A System-Platforms.package/OSPlatform.class/class/system startup/startUp_.st A System-Support.package/EndianDetector.class/class/class initialization/release.st M System-Support.package/EndianDetector.class/class/system startup/startUp_.st A System-Support.package/SmalltalkImage.class/class/image/wordSize.st M System-Support.package/SmalltalkImage.class/class/initialization/initialize.st A System-Support.package/SmalltalkImage.class/class/initialization/release.st M System-Support.package/SmalltalkImage.class/class/initialization/startUp_.st R System-Support.package/SmalltalkImage.class/class/initialize-release/wordSize.st M System-Support.package/SmalltalkImage.class/instance/snapshot and quit/snapshotPrimitive.st M System-VMEvents.package/InputEventFetcher.class/class/class initialization/deinstall.st M System-VMEvents.package/InputEventFetcher.class/class/class initialization/install.st M System-VMEvents.package/InputEventFetcher.class/instance/initialize-release/installEventLoop.st M System-VMEvents.package/InputEventFetcher.class/instance/initialize-release/terminateEventLoop.st M System-VMEvents.package/InputEventSensor.class/class/class initialization/installEventSensorFramework_.st M System-VMEvents.package/InputEventSensor.class/class/class initialization/installMouseDecodeTable.st M System-VMEvents.package/InputEventSensor.class/class/system startup/startUp.st R System-VMEvents.package/InputEventSensor.class/instance/initialize-release/shutDown.st R System-VMEvents.package/InputEventSensor.class/instance/initialize-release/startUp.st A System-VMEvents.package/InputEventSensor.class/instance/system startup/shutDown.st A System-VMEvents.package/InputEventSensor.class/instance/system startup/startUp.st R Tool-Base.package/PharoCommonTools.class/class/cleanUp/shutDown_.st M Tool-Base.package/PharoCommonTools.class/class/initialization/initialize.st A Tool-Base.package/PharoCommonTools.class/class/initialization/release.st A Tool-Base.package/PharoCommonTools.class/class/system startup/shutDown_.st M Tool-ProcessBrowser.package/CPUWatcher.class/class/class initialization/initialize.st M Traits.package/TClass.class/instance/initialize-release/removeFromSystem_.st Log Message: ----------- 50540 Pharo http://files.pharo.org/image/50/50540.zip

Jan. 22, 2016