- Pharo-dev - lists.pharo.org

Re: [Pharo-project] about reliability of installer

by Keith Hodges

StÃ©phane Ducasse wrote: > Hi guys > > I was going over the chapter on installer and I played a bit with it. > But I got the following behavior > > | monticello | > monticello := Installer monticello > http: 'http://www.squeaksource.com/BreakOut'. > monticello addPackage: 'BreakOut'. > monticello install > > > this installed > > > breakout-rj.11 > while > the latest one is Breakout-rkrk.119 > > and of course I did not want to load Breakout but BreakOut which is my > version. > > So this experience shows me that Installer is a nice idea but that it > has unpredictable behavior > --- may be I should reimplement the api I need and make it work (now > keith will shout as usual) > > Lukas is it because of such behavior that you got problem loading > seaside or other projects with it? > > Stef Remember the old adage. Garbage in Garbage Out.. 1. give Installer specifics. 2. use the api properly 3. dont expect it to read your mind. You got exactly what you asked for Keith

March 16, 2009

Re: [Pharo-project] World Graphics and Halos

by Rob Rothwell

"Resetting the halo specs?" What do you mean? Putting back other removed methods? Rob 2009/3/15 Gary Chambers <gazzaguru2(a)btinternet.com> > I noticed the halo problem in the dev image too. Resetting the halo specs > is needed since one has been removed... > > Regards, Gary > > ----- Original Message ----- > *From:* Rob Rothwell <r.j.rothwell(a)gmail.com> > *To:* Pharo-project(a)lists.gforge.inria.fr > *Sent:* Saturday, March 14, 2009 11:35 PM > *Subject:* Re: [Pharo-project] World Graphics and Halos > > Yep...that seemed to fix it! > > Now if I could just figure out how to remove a Morph from the World without > Halos! > > If I do System->About it is so big now that it won't all fit on my screen, > so I can't reach the ok button to close it and I am stuck with it! > > Rob > > On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen < > henrik.s.johansen(a)veloxit.no> wrote: > >> Attached a .cs to the issue with a fix, also including the solution Gary >> suggested for the taskbar-issue that was reported. >> (I don't know how to remove methods in .cs files, and haven't yet gotten >> around to learn how to make slices, so BorderedMorph>>areasRemainingToFill: >> would have to be removed by hand..) >> >> Cheers, >> Henry >> >> On 14.03.2009 22:04, Rob Rothwell wrote: >> >> Done. >> >> Issues 655 >> >>> >>> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: >>> >>> > Hi all, >>> > >>> > Open up a 10250 dev image and click anywhere within the bounds of >>> > the "Pharo" graphic. >>> > >>> > The world menu pops up and leaves part of itself behind when you >>> > click somewhere else on the screen. >>> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > ------------------------------ > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 16, 2009

Re: [Pharo-project] about reliability of installer

by StÃ©phane Ducasse

>> > > According to http://www.squeaksource.com/BreakOut/: > - the latest version of BreakOut is BreakOut-rk.11.mcz. > - the latest version of Breakout is Breakout-rkrk.119.mcz > > The Installer seems to work quite fine for me, just spell the name of > the game correctly :-). I do not understand what you mean since I spelt it correctly. BreakOut and I got Breakout | monticello | monticello := Installer monticello http: 'http://www.squeaksource.com/BreakOut' . monticello addPackage: 'BreakOut'. monticello install -> I get Breakout-rk and the package is NAMED Breakout and I did not ask that one but BreakOut People apparently polluted my open repository. > Moreover, you can write something like the > following which is cleaner: > > Installer ss > project: 'BreakOut'; > addPackage: 'BreakOut'; > install For me this installs: Breakout-rk.11 and not Breakout...119 Now > Installer ss > project: 'BreakOut'; > addPackage: 'Breakout'; > install install Breakout-rkrk.119.mcz I was discussing with lukas and he told me that the notion of latest in MC is bogus. So we should not use it. Stef

March 16, 2009

Re: [Pharo-project] about closures integration

by StÃ©phane Ducasse

ok I will try this evening. Stef On Mar 16, 2009, at 10:16 AM, Damien Cassou wrote: > On Sun, Mar 15, 2009 at 10:32 AM, StÃ©phane Ducasse > <stephane.ducasse(a)inria.fr> wrote: >> what is the case for the linux and windows one? > > Give me an image or the steps to make one and I will tell you if it > works. The Exupery VM works fine and I use it everyday. > > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 16, 2009

Re: [Pharo-project] World Graphics and Halos

by StÃ©phane Ducasse

Once you arrive to a fix point let me know what I should integrate. Stef On Mar 15, 2009, at 12:24 PM, Gary Chambers wrote: > I noticed the halo problem in the dev image too. Resetting the halo > specs is needed since one has been removed... > > Regards, Gary > ----- Original Message ----- > From: Rob Rothwell > To: Pharo-project(a)lists.gforge.inria.fr > Sent: Saturday, March 14, 2009 11:35 PM > Subject: Re: [Pharo-project] World Graphics and Halos > > Yep...that seemed to fix it! > > Now if I could just figure out how to remove a Morph from the World > without Halos! > > If I do System->About it is so big now that it won't all fit on my > screen, so I can't reach the ok button to close it and I am stuck > with it! > > Rob > > On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen <henrik.s.johansen(a)veloxit.no > > wrote: > Attached a .cs to the issue with a fix, also including the solution > Gary suggested for the taskbar-issue that was reported. > (I don't know how to remove methods in .cs files, and haven't yet > gotten around to learn how to make slices, so > BorderedMorph>>areasRemainingToFill: would have to be removed by > hand..) > > Cheers, > Henry > > On 14.03.2009 22:04, Rob Rothwell wrote: >> >> Done. >> >> Issues 655 >> >> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: >> >> > Hi all, >> > >> > Open up a 10250 dev image and click anywhere within the bounds of >> > the "Pharo" graphic. >> > >> > The world menu pops up and leaves part of itself behind when you >> > click somewhere else on the screen. > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

March 16, 2009

Re: [Pharo-project] about reliability of installer

by Damien Cassou

On Sun, Mar 15, 2009 at 6:32 PM, StÃ©phane Ducasse <Stephane.Ducasse(a)inria.fr> wrote: > I was going over the chapter on installer and I played a bit with it. > But I got the following behavior > > | monticello | > monticello := Installer monticello > Â Â Â Â Â Â Â Â http: 'http://www.squeaksource.com/BreakOut'. > Â Â Â Â monticello addPackage: 'BreakOut'. > Â Â Â Â monticello install > > > this installed > > > breakout-rj.11 > Â Â Â Â while > Â Â Â Â the latest one is Breakout-rkrk.119 According to http://www.squeaksource.com/BreakOut/: - the latest version of BreakOut is BreakOut-rk.11.mcz. - the latest version of Breakout is Breakout-rkrk.119.mcz The Installer seems to work quite fine for me, just spell the name of the game correctly :-). Moreover, you can write something like the following which is cleaner: Installer ss project: 'BreakOut'; addPackage: 'BreakOut'; install This will install Breakout-rkrk.119.mcz -- Damien Cassou http://damiencassou.seasidehosting.st

March 16, 2009

Re: [Pharo-project] about closures integration

by Damien Cassou

On Sun, Mar 15, 2009 at 10:32 AM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > what is the case for the linux and windows one? Give me an image or the steps to make one and I will tell you if it works. The Exupery VM works fine and I use it everyday. -- Damien Cassou http://damiencassou.seasidehosting.st

March 16, 2009

Re: [Pharo-project] Unicode test II

by Mariano Martinez Peck

On Fri, Mar 13, 2009 at 3:04 PM, Michael Rueger <m.rueger(a)acm.org> wrote: > Mariano Martinez Peck wrote: > > Sorry for the bad news. But still doesn't work. The first time I type > > "Ã¡" when I open the image, works perfect. But after that, every time I > > type that, I have the detailed wallback. > > Hmm, if I could only reproduce it here... > You said you are using the latin american keyboard. When you type Ã¡, do > you first hit ' and then a? Actually I type the key that has these three keys: "`", "[" and "^" and then "a". > > > Thanks for testing, I just hope I can figure this out... No problem at all. I hope to help with my testing. > > > Michael > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 15, 2009

Re: [Pharo-project] [Vm-dev] newDelta >0 failed in sqUnixMemory -- Was Re: Incompatibility between Pharo and Seasidehosting

by Bruce O'Neel

Hi, Thanks, I've finally gotten back to this and tested it. It works fine except for sound, which is broken in the same way that the 3-10.4 ones are broken (on at least ppc). They sound very bad. Does sound work on x86? If true, then it's probably a byte swapping problem and I can track that down. If no, then I have no idea. I did spend some time on it and wasn't successful. The 3.7-7 vm worked fine for sound. Thanks! cheers bruce On Sat, Mar 07, 2009 at 11:31:48AM +0100, Bruce O'Neel wrote: > Hi, > > Since this seems to work well for the x86 folks, Bryce, would you mind uploading > a source tarball so that others could build for other unixy system? That > would be great! > > If you could do this then I'll put my feeble attempts to build VMs on > hold since it's probably better for only one person to do this work per > platform, rather than have a confusing set of built VMs. :-) > > cheers > > bruce > > On Wed, Mar 04, 2009 at 08:39:11PM +0000, bryce(a)kampjes.demon.co.uk wrote: > > StÃ©phane Ducasse writes: > > > creating a unix vm. > > > > Here's a Unix VM built with an up to date VMMaker and a Windows VM: > > > > http://ftp.squeak.org/Exupery/vms/exupery-vm-0.15-linux.tz > > http://ftp.squeak.org/Exupery/vms/exupery-vm-0.15-win32.zip > > > > Both have the closure bytecodes and the FreeType bitblit extensions. > > The Linux VM includes the FreeType plugin, the Windows VM doesn't. > > > > Bryce > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

March 15, 2009

Re: [Pharo-project] Unicode test II

by Michael Rueger

Yoshiki Ohshima wrote: > If I manually call #determineCurrentLocale manually to set > CurrentPlatform, its locale becomes ja-JP but knownEnvironments only > contains key for "ja" and couldn't find it. Please try the attached patch. Thanks! Michael

March 15, 2009