- Pharo-dev - lists.pharo.org

Re: [Pharo-project] Random failures with Linux VM

by Michael Rueger

On Mon, Apr 27, 2009 at 10:18 PM, Bryce Kampjes <bryce(a)kampjes.demon.co.uk> wrote: > I'll try to reproduce your exact problem here. The problem is that it is truly random. I just worked a few hours and everything seemed ok. just an idea: it could be related to the network code, as a least the failure in my case seemed to occur relatively early when checking the repositories. Michael

April 27, 2009

Re: [Pharo-project] Recent changes to Pharo

by Victor Rodriguez

On Fri, Apr 17, 2009 at 10:15 PM, Scott Gibson <wsgibson(a)windstream.net> wrote: > I have noticed with the newer releases (pharo0.1-10277dev09.04.2 and > pharo0.1-10279dev09.04.3) there, which seemed to me, to be fixes/ > improvements that were lost from the earlier (Pharo0.1Core-10268cl and > pharo0.1-10268dev09.04.1) releases. Â These following occur for both > the Mac and Windows platforms: Hello Scott, This message is not related to Pharo, but rather to messages I keep getting about "please release container X". I think you may have included me in a message by mistake. I hope you can do something to stop these messages. Kind regards, Victor Rodriguez. > #1) Running "(1 to: 100) do: [:each | Transcript show: each; cr]" is > near instantaneous in the Transcript window compared to the more > recent releases. > > #2) For the process "the UI process" in the Process Browser - when > "the UI process" is selected processes actually show up but not in the > more recent releases. > > #3) The debugger buttons are once again centered and squished in the > middle of the debugging window. Â Is this actually now the norm? > > I am not sure exactly what is expected for these in Pharo's current > state but it seemed that perhaps some fixes had reverted and I should > submit issues for them. Â Was version 10268 the anomaly or are these > actual issues? > > > Thanks! > Scott > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 27, 2009

Re: [Pharo-project] Random failures with Linux VM

by Bryce Kampjes

On Mon, 2009-04-27 at 22:08 +0200, Michael Rueger wrote: > On Mon, Apr 27, 2009 at 10:04 PM, Bryce Kampjes > <bryce(a)kampjes.demon.co.uk> wrote: > > > > What version of Ubuntu are you using? I'm running 8.04 here and it's > > stable. > > 8.04 (I think, don't have access right now). > > I wonder if it could be something with running in VirtualBox, but that > seems rather far fetched. I'll try to reproduce your exact problem here. Bryce

April 27, 2009

Re: [Pharo-project] Random failures with Linux VM

by Michael Rueger

On Mon, Apr 27, 2009 at 10:04 PM, Bryce Kampjes <bryce(a)kampjes.demon.co.uk> wrote: > What version of Ubuntu are you using? I'm running 8.04 here and it's > stable. 8.04 (I think, don't have access right now). I wonder if it could be something with running in VirtualBox, but that seems rather far fetched. Michael

April 27, 2009

Re: [Pharo-project] Random failures with Linux VM

by Bryce Kampjes

On Mon, 2009-04-27 at 13:36 +0200, Michael Rueger wrote: > Hi all, > > while trying to update a 10281 on the closure (exupery) Linux VM I'm > running into random failures like DNUs, failed network access etc. > I'm running ubuntu in VirtualBox. > > Has anybody seen anything similar? > > Maybe I should try to build a "normal" Linux VM, just to check... What version of Ubuntu are you using? I'm running 8.04 here and it's stable. Bryce

April 27, 2009

Re: [Pharo-project] Sensor fixes again

by Mariano Martinez Peck

On Mon, Apr 27, 2009 at 4:45 PM, Michael Rueger <m.rueger(a)acm.org> wrote: > Hi all, > > next round ;-) > > > From the inbox load > > Kernel-michael_rueger.renggli.308 > > -fixed sensor install to update changeInformee > -fixed event handling, missed the button and modifier mangling "logic" > > System-Support-michael_rueger.14 > > -added changeInformee accessor methods to preference object > > After loading the packages you need to execute > > InputEventSensor installPollingEventSensorFramework > Nice! Results: - text selection with shift + narrows OK - swap mouse buttons OK - swap alt ctrl key OK - ctrl + b (browse class) shortcut doesn't work for me anymore but I don't know if this is due to this change. Thanks a lot!!! Mariano > > > Michael > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 27, 2009

[Pharo-project] Preference initialization

by Michael Rueger

Hi all, while working on the sensor fix I ran across the problem that there is no initialization code for current preference settings, a typical side effect of working with an image. Problem is, that references, in my case to the class InputSensor, can't be found by the usual cross reference methods. IMHO we should come up with "something" so we can re-generate the current preferences from code if needed. That initialization code would also provide the necessary cross references. Not sure how that plays with the pragma preference stuff... Michael

April 27, 2009

[Pharo-project] Sensor fixes again

by Michael Rueger

Hi all, next round ;-) From the inbox load Kernel-michael_rueger.renggli.308 -fixed sensor install to update changeInformee -fixed event handling, missed the button and modifier mangling "logic" System-Support-michael_rueger.14 -added changeInformee accessor methods to preference object After loading the packages you need to execute InputEventSensor installPollingEventSensorFramework Michael

April 27, 2009

Re: [Pharo-project] fun question and answer

by StÃ©phane Ducasse

yes much better :) Stef On Apr 27, 2009, at 6:37 PM, Lukas Renggli wrote: > What about inspecting/printing the following expression? > > Processor class classPool > > On Mon, Apr 27, 2009 at 6:29 PM, StÃ©phane Ducasse > <stephane.ducasse(a)inria.fr> wrote: >> Hi guys >> >> I want to print the name of a classVar and its value. >> So I tried something like >> >> Processor class classVarNames >> do: [:each | Transcript show: each ; show: each value ; cr] >> >> >> the solution.... >> >> Processor class classVarNames >> do: [:each | Transcript >> show: each ; >> show: (Compiler evaluate: each for: >> Processor logged: false) >> printString ; >> cr] >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Lukas Renggli > http://www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 27, 2009

Re: [Pharo-project] fun question and answer

by Lukas Renggli

What about inspecting/printing the following expression? Processor class classPool On Mon, Apr 27, 2009 at 6:29 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > Hi guys > > I want to print the name of a classVar and its value. > So I tried something like > > Processor class classVarNames > Â Â Â Â do: [:each | Transcript show: each ; show: each value ; cr] > > > the solution.... > > Processor class classVarNames > Â Â Â Â do: [:each | Transcript > Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â show: each ; > Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â show: (Compiler evaluate: each for: Processor logged: false) > printString ; > Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cr] > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Lukas Renggli http://www.lukas-renggli.ch

April 27, 2009