- Pharo-dev - lists.pharo.org

[Pharo-project] How To build exupery?

by Torsten Bergmann

Build instructions are available on the Swiki: http://wiki.squeak.org/squeak/5672 otherwise ask on the exupery list (http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/exupery) Bye T -- Neu: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate + Telefonanschluss fÃ¼r nur 17,95 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02

May 27, 2009

Re: [Pharo-project] How To build exupery?

by Giuseppe Luigi Punzi Ruiz

I downloaded but I suppose a make install or something like this is needed, to put all files and plugins in the rigth place. El 27/05/2009, a las 20:17, Mariano Martinez Peck escribiÃ³: > Why do you want to compile it ? You can just use the compiled one > > On Wed, May 27, 2009 at 5:13 PM, Giuseppe Luigi Punzi <glpunzi(a)lordzealon.com > > wrote: > Hi, > > I downloaded exupery.0.15.1. I'm on Linux. > > I can't find any README, INSTALL, "./configure" does nothing, "make" > the > same... > > How I may install it? > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project Giuseppe Luigi Punzi Ruiz http://www.lordzealon.com Twitter & Skype & GoogleTalk accounts: glpunzi

May 27, 2009

Re: [Pharo-project] How To build exupery?

by Mariano Martinez Peck

Why do you want to compile it ? You can just use the compiled one On Wed, May 27, 2009 at 5:13 PM, Giuseppe Luigi Punzi < glpunzi(a)lordzealon.com> wrote: > Hi, > > I downloaded exupery.0.15.1. I'm on Linux. > > I can't find any README, INSTALL, "./configure" does nothing, "make" the > same... > > How I may install it? > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

May 27, 2009

[Pharo-project] How To build exupery?

by Giuseppe Luigi Punzi

Hi, I downloaded exupery.0.15.1. I'm on Linux. I can't find any README, INSTALL, "./configure" does nothing, "make" the same... How I may install it?

May 27, 2009

Re: [Pharo-project] SLICE-RelicensingPart1

by Nicolas Cellier

Please remove the upper limit, I think this was a pre-internationalization method which should have been updated but was not because not used. For the lower limit, (CharacterTable at: anInteger + 1) in #value: already does the job of signalling the out of bound error, but yes, translation of the codePoint with this + 1 might be troubling. My POV is this one: Since #value: is responsible of possible mis-interpretation, #value: should handle disambiguation of the Error. That is a kind of encapsulation. I suggest error report be moved in #value:, not in every sender of #value: On the other hand, the test could eventually be omitted for efficiency reasons. Though, if efficiency really matters, I would rather see Character becoming immediate. Nicolas 2009/5/27 Alexandre Bergel <alexandre(a)bergel.eu>: > Yes, with a negative argument. > Adding the check: > Â (0 > integer or: [255 < integer]) > ifTrue: [self error: 'parameter out of range 0..255']. > is probably enough. > Alexandre > > > On 27 May 2009, at 08:27, Gabriel Cotelli wrote: > > The ANSI Specification doesn't mention anything about that the integer must > be in some range... the only thing that expects is that (Character > codePoint: x) codePoint = x .... > > anyway... I can add the verification... but that's not specified in the > ANSI... anybody knowns some senders of this? I checked Pharo-Dev and found > none.. maybe in the Web Image? > > Alexandre, how you obtain an error using value: ? given a negative argument? > I tried with values greater than 255 and works in my image... > > Tonight I check that > > 2009/5/27 Alexandre Bergel <Alexandre.Bergel(a)inria.fr> > I went through all the changes proposed by this slice. I am not sure how > should I review the code, but here is my try: > - the new version of Character class>>codePoint: anInteger seems to have a > different behavior: > The old (current) code is > codePoint: integer > "Return a character whose encoding value is integer." > #Fundmntl. > (0 > integer or: [255 < integer]) > ifTrue: [self error: 'parameter out of range 0..255']. > ^ CharacterTable at: integer + 1 > The new one is: > codePoint: anInteger > "Just for ANSI Compliance" > ^self value: anInteger > value: anInteger > "Answer the Character whose value is anInteger." > anInteger > 255 ifTrue: [^self basicNew setValue: anInteger]. > ^ CharacterTable at: anInteger + 1. > At the end an error is raised, but this is not the same. > Was this review useful? > Cheers, > Alexandre > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre BergelÂ Â http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre BergelÂ Â http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

May 27, 2009

Re: [Pharo-project] New Pharo based on core 10318 with antialiased fonts

by Nicolas Chillo

Hi. I recently download the new 10318 development image and it seems the OBTextSelection>>isClassNode MNU is not fixed yet. (See http://lists.gforge.inria.fr/pipermail/pharo-project/2009-May/008782.html) I just want to remind it for you to fix it because it would be a really pity to release a version with such a silly error. Thanks and excellent work. Nicolas On Wed, May 27, 2009 at 12:59 PM, Damien Cassou <damien.cassou(a)gmail.com>wrote: > On Wed, May 27, 2009 at 3:37 PM, Simon Denier <Simon.Denier(a)inria.fr> > wrote: > > Yes, installing ECompletionOmniBrowser before OCompletion should do > > the trick. > > Could you please check Romain and tell me so that I can update the script? > > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > "Lambdas are relegated to relative obscurity until Java makes them > popular by not having them." James Iry > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

May 27, 2009

Re: [Pharo-project] Issue 832

by Schwab,Wilhelm K

Stef, That would be nice for a temporary measure at least, because the performance really has suffered. Assuming you roll back, would it be enough to update my 10303 image? Bill -----Original Message----- From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of StÃ©phane Ducasse Sent: Wednesday, May 27, 2009 12:44 PM To: Pharo-project(a)lists.gforge.inria.fr Subject: Re: [Pharo-project] Issue 832 Thanks for reporting. Henrik? I could rollback the changes. Stef On May 27, 2009, at 6:25 PM, Gary Chambers wrote: > Performance of UI seems poor after 832 integration. > > http://code.google.com/p/pharo/issues/detail?id=832 > > Regards, Gary > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 27, 2009

Re: [Pharo-project] Pharo-min?

by StÃ©phane Ducasse

Dave I will not say the same as john. I know that people at IBM run Squeak (full environemnt in MVC in 1.7 mb). Now from a pharo perspective we would be **really** interested to integrate changes that you would provide to make the shrinking. Ideally I would like to have a core without compiler and just the core and a loading of byte code. So any step in that direction is of interest for us. Stef On May 27, 2009, at 6:33 PM, dmason(a)mason-rose.ca wrote: > Sorry if this is seen as off-topic, as I realize the goal is to get > Pharo-1.0 out the door, but I'm evaluating Pharo as the base for a > potentially huge application. > > I'm interested in building a minimum image from a Pharo-core base. > This > image would have: > > - no GUI/mouse/keyboard. The only interface would be via network > connections. > > - no processes/interrupts. The network send/receive would be > synchronous via a plugin. > > - no timer. The date/time would be via a plugin on demand. > > - no fallback debugger. Any error fallback would log a message and > abort via a plugin. > > - possibly a minimal interpreter that didn't include any support for > those unavailable features. (The only value in this would be smaller > size and hopefully something more comprehensible for code auditing > purposes.) > > Why bother with Squeak/Pharo/Smalltalk at all, some may ask? I need a > very reliable, *very* efficient, *very* powerful deployment platform, > and at the same time a *very* powerful development environment so we > can > stay nimble. The proposed alternative is Java, which meets the points > except on efficiency and development fronts. I've also been > involved in > a somewhat similar-scale project in the past, but the overwhelm of > 100+k > lines of Java code really bogged us down in the end. I'll look at GNU > Smalltalk too, for deployment, but I'd *really* like to be running the > identical code in development, test and production. > > Any gotchas? Any suggestions/hints? > > Just to tweak your interest further, the deployment platform would be > z/OS running on IBM big iron! > > ../Dave > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

May 27, 2009

Re: [Pharo-project] Issue 832

by StÃ©phane Ducasse

Thanks for reporting. Henrik? I could rollback the changes. Stef On May 27, 2009, at 6:25 PM, Gary Chambers wrote: > Performance of UI seems poor after 832 integration. > > http://code.google.com/p/pharo/issues/detail?id=832 > > Regards, Gary > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

May 27, 2009

Re: [Pharo-project] Pharo and XML

by StÃ©phane Ducasse

The problem with the tests of mike is that they required external files and so I do not know if they were run. Stef On May 27, 2009, at 4:35 PM, Alexandre Bergel wrote: > Hi Torsten, > > The work done by Michael is excellent. The parser works pretty well, > even on big XML files. There is currently no support for XPath > unfortunately. Pastell by Giovanni is a first step, but most of the > test are red. I plan to put some work on Pastell in a few days. We > could do it together if you wish. > > XMLParserTest is a collection of simple and small tests that run out > of the box. No need of external files as the XML testing package > requires as far as I remember. > > Cheers, > Alexandre > > On 27 May 2009, at 09:17, Torsten Bergmann wrote: > >> What's the status of XML support for pharo? Anyone tested if >> old (squeak) parsers work and what about xpath? >> >> >> @Alexandre: >> Whats the reason to put class "XMLParserTest" (a unit test) >> into the parser package instead of the XML testing package? >> (see XML-Parser-AlexandreBergel.15.mcz on 'http://www.squeaksource.com/XMLSupport') >> >> Thx >> T. >> >> >> >> >> -- >> Neu: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate + >> Telefonanschluss fÃ¼r nur 17,95 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02 >> > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

May 27, 2009