- Pharo-dev - lists.pharo.org

[Pharo-project] Fwd: [squeak-dev] Faster Sets Project: Response to comments.

by Mariano Martinez Peck

can this be of interest? ---------- Forwarded message ---------- From: Ralph Boland <rpboland(a)gmail.com> Date: Tue, Jun 23, 2009 at 6:47 PM Subject: [squeak-dev] Faster Sets Project: Response to comments. To: squeak-dev(a)lists.squeakfoundation.org First, as suggested I have changed the license to MIT. The follow suggestion was made: if you would like your new implementation to replace the old one in Squeak, you might want to write unit tests. These tests ensure that there is no problem. FasterSets includes only one new class used for measuring the performance improvement of the other changes. All of the remaining improvements are changes to class Set and its many subclasses. Allow me to consider 4 subsets of the classes Set and all of its subclasses. 1) (Set WeakIdentityKeyDictionary Dictionary) These classes have unit tests. I have run them and they all pass with FasterSets. 2) ComparesCountingSet This is the only new subclass of Set that I have added. It only measures performance and will disappear once the FasterSets project is incorporated into Squeak. Is is exercised sufficiently in doing its performance measurements that I do not feel that it needs a unit test. 3) (WeakKeyDictionary IdentityDictionary WeakSet KeyedSet PluggableDictionary WeakKeyToCollectionDictionary WeakValueDictionary PluggableSet MethodDictionary LiteralDictionary IdentitySet SystemDictionary KeyedIdentitySet) These are the subclasses of Set that have no unit tests. If unit tests for these classes are added to Squeak I will run FasterSets code against them and fix any FasterSet bugs I find. I have no desire to write them though. I don't know what most of them do and feel these tests are best written by someone who does. Even if all these test existed and passed with FasterSets it wouldn't establish that FasterSets has not introduced bugs. I have tested them in a rather poor way. I have been running Squeak using FasterSets since Squeak 3.6 and, as it happens, my application uses Set and a number of its subclasses A LOT! So some of these subclasses should be considered reasonably well tested (Set, Dictionary,IdentitySet). The others have been tested to the extent that they have been exercised by my using Squeak. However most of the work I do is algorithmic (finite state machine construction mostly) and so I'm sure large sections of Squeak are not exercised or not exercised very well by me. So there is real potential that anyone who loads FasterSets into their image will discover bugs and I recommend caution to anyone who loads FasterSets. Fixing bugs though should be easy. I will fix any reported to me or give permission to anyone who wants to to make and install the fix themselves. This may all sound very alarming but keep in mind that FasterSets actually contains very little code and not very complicated code at that. Caution is warranted because the classes modified are all low level and some are extensively used. The real problem though is, I suspect, some are not extensively used. 4) (WeakKeyToCollectionDictionary WeakValueDictionary PluggableSet LiteralDictionary SystemDictionary KeyedIdentitySet) These subclasses of Set have not been modified in FasterSets; in other words most have. Even the unmodified ones have superclasses that have been modified so all need to be tested. In fact the only reason for classes not being modified is because they inherit the necessary added behavior. Thus in my opinion the only classes that have been adequately tested are Set, Dictionary, and IdentityDictionary. If someone wants to claim that the five tests run by WeakIdentityKeyDictionaryTest are sufficient to claim WeakIdentityKeyDictionary is adequately tested I can add it to the list?. If anyone can send me a list of classes adequately tested just by running Squeak I will add them to the list. If I ever get to the point that all subclasses of Set are claimed to be adequately tested by somebody I will make a posting state this and who claims the tests are adequate. If anybody wishes to write any of the missing unit tests and add them to FasterSets until such time as they can be added to Squeak such efforts are most welcome. A final comment. I am most interested in getting FasterSets incorporated into Squeak and that means having FasterSets being properly tested. However I don't consider myself to be the best person to do this work though I will help if I can. The best persons to do so are those who can load FasterSets into their image and not be too upset if they get blown out of the water! They also must have images they can claim exercises one or most of the Set subclasses adequately. Regards, Ralph Boland On Sat, Jun 20, 2009 at 3:21 PM, Ralph Boland<rpboland(a)gmail.com> wrote: > I finally released my first project to the www.squeaksource.comrepository. > Its called FasterSets. It makes sets faster by not doing compares during > grow operations which makes adding to sets use about 14% fewer compares > on average during an add: operation assuming no deletions or preallocation > of space before adding elements. Code for measuring performance is included. > See Class FastSetsComment. > > Comments welcome. > > I consider the project complete but am willing to make changes as required > or give permissions for others to do so or to take over the project. > > My hope is that this code will be incorporated into Squeak someday. > I have not signed any release forms to allow this but am willing to do > so. > > The project runs in Squeak 3.10.2 but can be easily modified to work > in previous > versions of Squeak. > > Regards > > Ralph Boland > >

June 25, 2009

Re: [Pharo-project] [update] 10343

by Rob Rothwell

Thanks! That did it... Rob 2009/6/24 Marco Schmidt <Marco.Schmidt(a)taugamma.de> > Reloading the eCompletion packages from Squeaksource helps for me in these > situations after updating my images. > Marco > > > > > 2009/6/24 Rob Rothwell <r.j.rothwell(a)gmail.com> > > Sure...I just downloaded 10342 for good measure, opened it up, opened a >> Workspace, and watched OCompletion work while typing "Morph new >> openInWorld." >> >> Then I ran the system updates to 10343, and it did not work anymore. >> >> Should I log an issue? >> >> Rob >> >> 2009/6/24 Romain Robbes <romain.robbes(a)lu.unisi.ch> >> >> Rob, can you confirm this? >>> Romain >>> >>> On Jun 22, 2009, at 4:58 AM, Rob Rothwell wrote: >>> >>> Looks like maybe OCompletion quit working in a Workspace with this >>> update? >>> >>> Rob >>> >>> On Sun, Jun 21, 2009 at 6:34 PM, Adrian Lienhard <adi(a)netstyle.ch>wrote: >>> >>>> Final license cleaning... >>>> >>>> - Network-Url-GabrielOmarCotelli.7 >>>> HTTPUrl>>retrieveContentArgs: >>>> - Morphic-GabrielOmarCotelli.326 >>>> TransformMorph >> numberOfItemsPotentiallyInViewWith: >>>> PluggableListMorph >> numSelectionsInView >>>> WorldState class >> deferredExecutionTimeLimit >>>> WorldState >> runStepMethodsIn: >>>> - Cleaning of PMM methods >>>> Object >> isTrait >>>> Set class >> rehashAllSets >>>> Set class >> new >>>> CodeLoader class >> exportCodeSegment:classes:keepSource: >>>> FloatTest >> testInfinity3 (deleted) >>>> FloatTest >> testZero2 (deleted) >>>> >>>> >>>> This should make Pharo MIT license clean. Will do an audit to be sure >>>> tomorrow. >>>> >>>> Adrian >>>> ___________________ >>>> http://www.adrian-lienhard.ch/ >>>> >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> <ATT00001.txt> >>> >>> >>> -- >>> Romain Robbes >>> http://www.inf.unisi.ch/phd/robbes >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

June 25, 2009

Re: [Pharo-project] ODBC on Pharo?

by Mariano Martinez Peck

Bill: How are you trying to install it? I just download from MC http://www.squeaksource.com/ODBC version: ODBC-rjl.10 and latest FFI (ScriptLoader loadFFI) and it was sucessuflly (I think) installed. I am using Pharo 10328. I have no idea is this is the correct ODBC. I cannot neither test it because I don't see any test. I saw also ODBCEnh but I don't know which one do you want. Anyway, SqueakDBX also supports ODBC. Right now ODBC only works in Linux. You can see the supported backend here: http://wiki.squeak.org/squeak/6108 Which database are you using? Cheers, Mariano On Wed, Jun 24, 2009 at 8:57 PM, Schwab,Wilhelm K <bschwab(a)anest.ufl.edu>wrote: > Hello all, > > Are any of you loading the ODBC packages into Pharo? I'm hitting a problem > that looks like it might be due to compiler or related changes. One > solution might be to load the gzipped change set into an older Squeak and > save a .mcz file. Does any of this sound familiar/handled to you? If so, I > would appreciate a pointer in the right direction. > > Thanks, > > Bill > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

June 25, 2009

[Pharo-project] ODBC on Pharo?

by Schwab,Wilhelm K

Hello all, Are any of you loading the ODBC packages into Pharo? I'm hitting a problem that looks like it might be due to compiler or related changes. One solution might be to load the gzipped change set into an older Squeak and save a .mcz file. Does any of this sound familiar/handled to you? If so, I would appreciate a pointer in the right direction. Thanks, Bill

June 24, 2009

Re: [Pharo-project] [squeak-dev] SqueakDBX news

by Adrian Lienhard

Thanks for the update. Please keep us posted. This is important work! Thanks, Adrian On Jun 24, 2009, at 22:43 , Mariano Martinez Peck wrote: > Hi folks. We want to tell you some news about our project > > 1) We has been selected (as we were in 2008) to the ESUG SummerTalk > 2009. > You can read more here: http://www.esug.org/Promotion/SummerTalk > As you may notice, most of this work is related to the Glorp > refactor and > integration with SqueakDBX. > > 2) We will give a talk in ESUG conference 2009. See more here: > http://www.esug.org/Conferences/2009/Current+List+of+Talks > > 3) We had applied for ESUG Innovation TechnologyAwards > > 4) We are developing our own website using Seaside and Pier. I will > have all > we have right now in http://wiki.squeak.org/squeak/6052 and there > will be a > blog where we will post all of our progress. Don't ask how this is > persisted > ;) > > 5) We have created a mailing list. If you are interested, you can > join: > http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx > All questions, bug reports, etc, should be ask there. This is in > order to > avoid noise in other mailing lists and in addition perhaps not all > SqueakDBX > team is subscribed to all mailing lists (squeak, pharo...) > > 6) We have done the first refactor to Glorp and it is all green with > native > driver. With SqueakDBX driver is almost all green with PostgreSQL :) > > > Finally, we want to thanks ESUG for its contribution. They really > helps us a > lot in many many ways. It's nice to see people promoting smalltalk > development. > > > Cheers, > > Mariano >

June 24, 2009

[Pharo-project] SqueakDBX news

by Mariano Martinez Peck

Hi folks. We want to tell you some news about our project 1) We has been selected (as we were in 2008) to the ESUG SummerTalk 2009. You can read more here: http://www.esug.org/Promotion/SummerTalk As you may notice, most of this work is related to the Glorp refactor and integration with SqueakDBX. 2) We will give a talk in ESUG conference 2009. See more here: http://www.esug.org/Conferences/2009/Current+List+of+Talks 3) We had applied for ESUG Innovation TechnologyAwards 4) We are developing our own website using Seaside and Pier. I will have all we have right now in http://wiki.squeak.org/squeak/6052 and there will be a blog where we will post all of our progress. Don't ask how this is persisted ;) 5) We have created a mailing list. If you are interested, you can join: http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx All questions, bug reports, etc, should be ask there. This is in order to avoid noise in other mailing lists and in addition perhaps not all SqueakDBX team is subscribed to all mailing lists (squeak, pharo...) 6) We have done the first refactor to Glorp and it is all green with native driver. With SqueakDBX driver is almost all green with PostgreSQL :) Finally, we want to thanks ESUG for its contribution. They really helps us a lot in many many ways. It's nice to see people promoting smalltalk development. Cheers, Mariano

June 24, 2009

Re: [Pharo-project] [ANN] Glorp now load easily in Pharo

by Mariano Martinez Peck

On Wed, Jun 24, 2009 at 6:54 PM, Michael Atkisson < michael_atkisson(a)comcast.net> wrote: > > Mariano, > It was the loadGlorp. I was able to install it and all the > tests ran green. > Excellent!!! It should be simple to fix that, but I don't know how :( I am glad it worked!!! > > Thanks! > > > > Mariano Martinez Peck wrote: > > > > Hi Michael, > > > > Which selector? When you evaluates this: > > > > |instClass| > > instClass := Smalltalk at: #Installer ifAbsent: [ScriptLoader > > loadLatestPackage: 'Installer-Core' fromSqueaksource: 'Installer'. > > Smalltalk > > at: #Installer]. > > instClass ss project: 'Glorp'; install: 'GlorpPharoLoader'. > > (Smalltalk at: #GlorpPharoLoader) loadGlorp. > > > > It probably will complain about loadGlorp. Just ignore it and select > > loadGlorp as it is. > > > > Was this your problem? > > > > Which Pharo image are you using? > > > > Mariano > > > > ps: We are creating a squeakDBX mailing list soon. I will let you know > > when > > this is done ;) > > > > > > On Wed, Jun 24, 2009 at 3:24 PM, Michael Atkisson < > > michael_atkisson(a)comcast.net> wrote: > > > >> > >> Mariano, > >> Just following these instructions doesn't work for me. I get an > unknown > >> selector error. Are there some missing steps? > >> > >> > >> > >> Mariano Martinez Peck wrote: > >> > > >> > Hi: I created the packages GlorpPharoPort and GlorpPharoLoader in > >> > SqueakSource. > >> > > >> > In GlorpPharoPort we will put all the changes (to the current packages > >> of > >> > Glorp in squeaksource) o new stuff that is required for Glorp to work > >> in > >> > Pharo but that is Glorp related. Notice this port is based in the > >> Squeak > >> > port, not VW directly... > >> > > >> > So, to load Glorp in Pharo, take a Pharo image and evaluate this: > >> > > >> > |instClass| > >> > instClass := Smalltalk at: #Installer ifAbsent: [ScriptLoader > >> > loadLatestPackage: 'Installer-Core' fromSqueaksource: 'Installer'. > >> > Smalltalk > >> > at: #Installer]. > >> > instClass ss project: 'Glorp'; install: 'GlorpPharoLoader'. > >> > (Smalltalk at: #GlorpPharoLoader) loadGlorp. > >> > > >> > This also works with latests images where the Eliot closures are > >> > integrated. > >> > > >> > The important thing here is that Pharo doesn't support underscore in > >> > selectors. So, it is installed the workarround that is here: > >> > http://code.google.com/p/pharo/issues/detail?id=826 > >> > > >> > We hope someone really fix this so that no to use the workarround. > >> > > >> > Cheers, > >> > > >> > Mariano > >> > > >> > _______________________________________________ > >> > Pharo-project mailing list > >> > Pharo-project(a)lists.gforge.inria.fr > >> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >> > > >> > >> -- > >> View this message in context: > >> > http://n2.nabble.com/-ANN--Glorp-now-load-easily-in-Pharo-tp3056236p3149799… > >> Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > >> > >> > >> _______________________________________________ > >> Pharo-project mailing list > >> Pharo-project(a)lists.gforge.inria.fr > >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >> > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > -- > View this message in context: > http://n2.nabble.com/-ANN--Glorp-now-load-easily-in-Pharo-tp3056236p3151049… > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

June 24, 2009

Re: [Pharo-project] [ANN] Glorp now load easily in Pharo

by Michael Atkisson

Mariano, It was the loadGlorp. I was able to install it and all the tests ran green. Thanks! Mariano Martinez Peck wrote: > > Hi Michael, > > Which selector? When you evaluates this: > > |instClass| > instClass := Smalltalk at: #Installer ifAbsent: [ScriptLoader > loadLatestPackage: 'Installer-Core' fromSqueaksource: 'Installer'. > Smalltalk > at: #Installer]. > instClass ss project: 'Glorp'; install: 'GlorpPharoLoader'. > (Smalltalk at: #GlorpPharoLoader) loadGlorp. > > It probably will complain about loadGlorp. Just ignore it and select > loadGlorp as it is. > > Was this your problem? > > Which Pharo image are you using? > > Mariano > > ps: We are creating a squeakDBX mailing list soon. I will let you know > when > this is done ;) > > > On Wed, Jun 24, 2009 at 3:24 PM, Michael Atkisson < > michael_atkisson(a)comcast.net> wrote: > >> >> Mariano, >> Just following these instructions doesn't work for me. I get an unknown >> selector error. Are there some missing steps? >> >> >> >> Mariano Martinez Peck wrote: >> > >> > Hi: I created the packages GlorpPharoPort and GlorpPharoLoader in >> > SqueakSource. >> > >> > In GlorpPharoPort we will put all the changes (to the current packages >> of >> > Glorp in squeaksource) o new stuff that is required for Glorp to work >> in >> > Pharo but that is Glorp related. Notice this port is based in the >> Squeak >> > port, not VW directly... >> > >> > So, to load Glorp in Pharo, take a Pharo image and evaluate this: >> > >> > |instClass| >> > instClass := Smalltalk at: #Installer ifAbsent: [ScriptLoader >> > loadLatestPackage: 'Installer-Core' fromSqueaksource: 'Installer'. >> > Smalltalk >> > at: #Installer]. >> > instClass ss project: 'Glorp'; install: 'GlorpPharoLoader'. >> > (Smalltalk at: #GlorpPharoLoader) loadGlorp. >> > >> > This also works with latests images where the Eliot closures are >> > integrated. >> > >> > The important thing here is that Pharo doesn't support underscore in >> > selectors. So, it is installed the workarround that is here: >> > http://code.google.com/p/pharo/issues/detail?id=826 >> > >> > We hope someone really fix this so that no to use the workarround. >> > >> > Cheers, >> > >> > Mariano >> > >> > _______________________________________________ >> > Pharo-project mailing list >> > Pharo-project(a)lists.gforge.inria.fr >> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > >> >> -- >> View this message in context: >> http://n2.nabble.com/-ANN--Glorp-now-load-easily-in-Pharo-tp3056236p3149799… >> Sent from the Pharo Smalltalk mailing list archive at Nabble.com. >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- View this message in context: http://n2.nabble.com/-ANN--Glorp-now-load-easily-in-Pharo-tp3056236p3151049… Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

June 24, 2009

Re: [Pharo-project] [update] 10343

by Marco Schmidt

Reloading the eCompletion packages from Squeaksource helps for me in these situations after updating my images. Marco 2009/6/24 Rob Rothwell <r.j.rothwell(a)gmail.com> > Sure...I just downloaded 10342 for good measure, opened it up, opened a > Workspace, and watched OCompletion work while typing "Morph new > openInWorld." > > Then I ran the system updates to 10343, and it did not work anymore. > > Should I log an issue? > > Rob > > 2009/6/24 Romain Robbes <romain.robbes(a)lu.unisi.ch> > > Rob, can you confirm this? >> Romain >> >> On Jun 22, 2009, at 4:58 AM, Rob Rothwell wrote: >> >> Looks like maybe OCompletion quit working in a Workspace with this update? >> >> Rob >> >> On Sun, Jun 21, 2009 at 6:34 PM, Adrian Lienhard <adi(a)netstyle.ch> wrote: >> >>> Final license cleaning... >>> >>> - Network-Url-GabrielOmarCotelli.7 >>> HTTPUrl>>retrieveContentArgs: >>> - Morphic-GabrielOmarCotelli.326 >>> TransformMorph >> numberOfItemsPotentiallyInViewWith: >>> PluggableListMorph >> numSelectionsInView >>> WorldState class >> deferredExecutionTimeLimit >>> WorldState >> runStepMethodsIn: >>> - Cleaning of PMM methods >>> Object >> isTrait >>> Set class >> rehashAllSets >>> Set class >> new >>> CodeLoader class >> exportCodeSegment:classes:keepSource: >>> FloatTest >> testInfinity3 (deleted) >>> FloatTest >> testZero2 (deleted) >>> >>> >>> This should make Pharo MIT license clean. Will do an audit to be sure >>> tomorrow. >>> >>> Adrian >>> ___________________ >>> http://www.adrian-lienhard.ch/ >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> <ATT00001.txt> >> >> >> -- >> Romain Robbes >> http://www.inf.unisi.ch/phd/robbes >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

June 24, 2009

Re: [Pharo-project] [ANN] Glorp now load easily in Pharo

by Mariano Martinez Peck

Hi Michael, Which selector? When you evaluates this: |instClass| instClass := Smalltalk at: #Installer ifAbsent: [ScriptLoader loadLatestPackage: 'Installer-Core' fromSqueaksource: 'Installer'. Smalltalk at: #Installer]. instClass ss project: 'Glorp'; install: 'GlorpPharoLoader'. (Smalltalk at: #GlorpPharoLoader) loadGlorp. It probably will complain about loadGlorp. Just ignore it and select loadGlorp as it is. Was this your problem? Which Pharo image are you using? Mariano ps: We are creating a squeakDBX mailing list soon. I will let you know when this is done ;) On Wed, Jun 24, 2009 at 3:24 PM, Michael Atkisson < michael_atkisson(a)comcast.net> wrote: > > Mariano, > Just following these instructions doesn't work for me. I get an unknown > selector error. Are there some missing steps? > > > > Mariano Martinez Peck wrote: > > > > Hi: I created the packages GlorpPharoPort and GlorpPharoLoader in > > SqueakSource. > > > > In GlorpPharoPort we will put all the changes (to the current packages of > > Glorp in squeaksource) o new stuff that is required for Glorp to work in > > Pharo but that is Glorp related. Notice this port is based in the Squeak > > port, not VW directly... > > > > So, to load Glorp in Pharo, take a Pharo image and evaluate this: > > > > |instClass| > > instClass := Smalltalk at: #Installer ifAbsent: [ScriptLoader > > loadLatestPackage: 'Installer-Core' fromSqueaksource: 'Installer'. > > Smalltalk > > at: #Installer]. > > instClass ss project: 'Glorp'; install: 'GlorpPharoLoader'. > > (Smalltalk at: #GlorpPharoLoader) loadGlorp. > > > > This also works with latests images where the Eliot closures are > > integrated. > > > > The important thing here is that Pharo doesn't support underscore in > > selectors. So, it is installed the workarround that is here: > > http://code.google.com/p/pharo/issues/detail?id=826 > > > > We hope someone really fix this so that no to use the workarround. > > > > Cheers, > > > > Mariano > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > -- > View this message in context: > http://n2.nabble.com/-ANN--Glorp-now-load-easily-in-Pharo-tp3056236p3149799… > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

June 24, 2009