- Pharo-dev - lists.pharo.org

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Mariano Martinez Peck

On Fri, Jan 22, 2010 at 4:27 PM, Torsten Bergmann <astares(a)gmx.de> wrote: > Thanks. The image (both the ST-part and the background) looks good. > > Mariano would you please use the numbering from Damien when > uploading to inria, currently http://gforge.inria.fr/frs/?group_id=1299 > looks like: > > Pharo (pharo-dev) > Pharo1.0-10508-rc2dev10.01.2 2010-01-22 15:26 > Pharo1.0-10508-rc2dev10.01.2.zip > > but should > > Pharo (pharo-dev) > 10.01.2 2010-01-22 15:26 > Pharo1.0-10508-rc2dev10.01.2.zip > > since a release can have more than one file. > > Thanks for the point! DONE. > I adopted this for the Pharo Win32 Setup section too. > > A fresh win32 installer is currently in preparation. > > Cool. I was going to explicitly ask you :) > With the step from RC1 to RC2 we should change the current status > on: > http://pharo-project.org/home > > and make the image available on: > > http://pharo-project.org/pharo-download > > Yes, but later. Remember the idea of the beta testing. Once the image is tested by the beta-testers, and only if it is ok, it will be uploaded there for the "final users" Cheers Mariano Thx > T. > > > -- > Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 > - > sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Jan. 22, 2010

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Tudor Girba

Hi Mariano, Nice work. Moose loads and works as expected. I also loaded O2 without problems. Cheers, Doru On 22 Jan 2010, at 15:32, Mariano Martinez Peck wrote: > Hi folks. This is 1.0 RC2. Please, look at this image in a nice way > because it is very likely that if there is no big issue, it will be > 1.0 official. We need to release 1.0. > > Issues fixed: In addition to the fixes from the PharoCore, we have: > 1033, 1182, 1826, 1862. > > Big changes: > > - Now we use OB from Lukas Renggli repository and we have ALL TESTS > GREEN!!! Thanks Lukas! > - O2 loads again in the image without breaking OB. Read the > workspace to see how to install it. Thanks David and Alexandre! > - We have almost (only one failing here) ALL TESTS of the PharoDev > image in green. They are more than 8800. > > Smaller changes: > > - Fixed the problem with Metacello and OCompletion. No more overrides. > - System -> About now shows the real Pharo name, not the core. I am > also being "compatible" with the new SystemVersion that we have in > 1.1 :) Thanks Michael and Miguel! > - I didn't left again my proxy settings. I fixed this in my build > scripts. It should be clean :) > - Mercury bar is back again. If you want to disable: Preferences > disable: #mercuryPanel. > - Added a lot of cleanups after creating the image, including > condensing .changes > - Added Refactoring-Spelling again. Thanks Stan! > - I wrote a ConfigurationOfNile instead of Nile-All and depends on > Monticello dependencies. > - New welcome workspaces. Also getting started workspace and another > workspace explaining how to load external packages like Seaside (2.8 > and 3), Magritte, Pier, Moose, GetTools, O2, etc. Finally it is also > added a link to the new ProfStef :) > Do you think that with this we are able to close issue1479 ? > - Background with Pharo picture. This was a joke. It looked > nice :) I promise I don't put it again if you don't like. To > remove it evaluate: > World color: Color white. > - Enable the preference fastDragWindowForMorphic. Sorry, but it most > computers this works REALLY slow. If you want them back, just > disable it. > - When installing Seaside now doesn't ask for user and password > ( admin/seaside ). In addition, the Seaside Control Panel is only > isntalled if OB is installed. This means that yu can install it in > core or dev. Thanks Dale! > - Disable of System Update for Dev images as it is not working > properly. > > > The link is: https://gforge.inria.fr/frs/download.php/25397/Pharo1.0-10508-rc2dev10.01.2… > > Cheers > > Mariano > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project -- www.tudorgirba.com "We cannot reach the flow of things unless we let go."

Jan. 22, 2010

[Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Torsten Bergmann

Thanks. The image (both the ST-part and the background) looks good. Mariano would you please use the numbering from Damien when uploading to inria, currently http://gforge.inria.fr/frs/?group_id=1299 looks like: Pharo (pharo-dev) Pharo1.0-10508-rc2dev10.01.2 2010-01-22 15:26 Pharo1.0-10508-rc2dev10.01.2.zip but should Pharo (pharo-dev) 10.01.2 2010-01-22 15:26 Pharo1.0-10508-rc2dev10.01.2.zip since a release can have more than one file. I adopted this for the Pharo Win32 Setup section too. A fresh win32 installer is currently in preparation. With the step from RC1 to RC2 we should change the current status on: http://pharo-project.org/home and make the image available on: http://pharo-project.org/pharo-download Thx T. -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser

Jan. 22, 2010

[Pharo-project] BlockCannotReturn: Block cannot return

by Mariano Martinez Peck

see: http://code.google.com/p/pharo/issues/detail?id=1865 Problem when canceling the quit of an image. Pharo image: PharoCore Pharo core version: 11177 Virtual machine used: Squeak 4.2.2beta1U.app Steps to reproduce: 1. Cmd + Q to quit 2. When the popup brings, select cancel 3. Theere you will have the error BlockCannotReturn: Block cannot return I attach PharoDebug.log Cheers Mariano

Jan. 22, 2010

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Mariano Martinez Peck

2010/1/22 Lukas Renggli <renggli(a)gmail.com> > >> Could a single instance > >> be aligned in the top middle of the screen? > > > > Lukas, I really don't understand the problem when you have a bigger > screen. > > Is the picture cut ? do you have an screenshot ? > > It is a minor problem, but I couldn't find another one (hahahahhaha) > > This is a good news then :) Hope everyone has this kind of problems hahaha > The image just repeats in a not so nice way. I think it would look > better if the rest of the screen was white. > > ok...now I understand....that's because I don't have a screen! hahaha I have no idea how we can solve this :( Maybe some Morphic guru can help us. > Lukas > > -- > Lukas Renggli > http://www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Jan. 22, 2010

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Lukas Renggli

>> Could a single instance >> be aligned in the top middle of the screen? > > Lukas, I really don't understand the problem when you have a bigger screen. > Is the picture cut ? do you have an screenshot ? It is a minor problem, but I couldn't find another one (hahahahhaha) The image just repeats in a not so nice way. I think it would look better if the rest of the screen was white. Lukas -- Lukas Renggli http://www.lukas-renggli.ch

Jan. 22, 2010

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Mariano Martinez Peck

On Fri, Jan 22, 2010 at 3:56 PM, Lukas Renggli <renggli(a)gmail.com> wrote: > > - Background with Pharo picture. This was a joke. It looked nice :) I > > promise I don't put it again if you don't like. To remove it evaluate: > > World color: Color white. > > I was shocked when I read this, but actually it looks pretty cool. hahahahah thanks :) Actually, I did it for my own image, but then I like it and wanted to show you :) > The > only problem is that my screen is too large. That cannot be a problem ;) > Could a single instance > be aligned in the top middle of the screen? > > Lukas, I really don't understand the problem when you have a bigger screen. Is the picture cut ? do you have an screenshot ? > I like the image. I just loaded some of the extra packages and that > works really great. > > Cool! Thanks. Mariano Lukas > > > -- > Lukas Renggli > http://www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Jan. 22, 2010

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Lukas Renggli

> - Background with Pharo picture. This was a joke. It looked nice :)Â Â Â I > promise I don't put it again if you don't like. To remove it evaluate: > World color: Color white. I was shocked when I read this, but actually it looks pretty cool. The only problem is that my screen is too large. Could a single instance be aligned in the top middle of the screen? I like the image. I just loaded some of the extra packages and that works really great. Lukas -- Lukas Renggli http://www.lukas-renggli.ch

Jan. 22, 2010

[Pharo-project] [BetaTesting] [ANN] Pharo1.0-10507-rc2dev10.01.2

by Mariano Martinez Peck

Hi folks. This is 1.0 RC2. Please, look at this image in a nice way because it is very likely that if there is no big issue, it will be 1.0 official. We need to release 1.0. * Issues fixed*: In addition to the fixes from the PharoCore, we have: 1033, 1182, 1826, 1862. *Big changes*: - Now we use OB from Lukas Renggli repository and we have ALL TESTS GREEN!!! Thanks Lukas! - O2 loads again in the image without breaking OB. Read the workspace to see how to install it. Thanks David and Alexandre! - We have almost (only one failing here) ALL TESTS of the PharoDev image in green. They are more than 8800. *Smaller changes: * - Fixed the problem with Metacello and OCompletion. No more overrides. - System -> About now shows the real Pharo name, not the core. I am also being "compatible" with the new SystemVersion that we have in 1.1 :) Thanks Michael and Miguel! - I didn't left again my proxy settings. I fixed this in my build scripts. It should be clean :) - Mercury bar is back again. If you want to disable: Preferences disable: #mercuryPanel. - Added a lot of cleanups after creating the image, including condensing .changes - Added Refactoring-Spelling again. Thanks Stan! - I wrote a ConfigurationOfNile instead of Nile-All and depends on Monticello dependencies. - New welcome workspaces. Also getting started workspace and another workspace explaining how to load external packages like Seaside (2.8 and 3), Magritte, Pier, Moose, GetTools, O2, etc. Finally it is also added a link to the new ProfStef :) Do you think that with this we are able to close issue1479 ? - Background with Pharo picture. This was a joke. It looked nice :) I promise I don't put it again if you don't like. To remove it evaluate: World color: Color white. - Enable the preference fastDragWindowForMorphic. Sorry, but it most computers this works REALLY slow. If you want them back, just disable it. - When installing Seaside now doesn't ask for user and password ( admin/seaside ). In addition, the Seaside Control Panel is only isntalled if OB is installed. This means that yu can install it in core or dev. Thanks Dale! - Disable of System Update for Dev images as it is not working properly. The link is: https://gforge.inria.fr/frs/download.php/25397/Pharo1.0-10508-rc2dev10.01.2… Cheers Mariano

Jan. 22, 2010

[Pharo-project] Dedicated image now available for Pharo by Example

by Oscar Nierstrasz

Hi Folks, Apparently people have been having problems following Pharo by Example with the latest Pharo images. To make their lives easier, I have now added a download link to http://PharoByExample.org for a dedicated image. It is essentially pharo1.0-10451-BETAweb09.09.3 with the OB Package Browser selected by default. It should be 99% consistent with the book. Please pass the word on to anyone you know who is experiencing problems following the book. - on

Jan. 22, 2010