- Pharo-dev - lists.pharo.org

Re: [Pharo-project] Metacello Catalog [was: Re: ConfigurationOfAida is available]

by Esteban Lorenzano

damn! well... I can host it (on smallworks.com.ar), but I don't think this is a good solution in the long way... Cheers, Esteban On 2010-01-27 12:23:02 -0300, Mariano Martinez Peck <marianopeck(a)gmail.com> said: > > > On Wed, Jan 27, 2010 at 4:20 PM, Esteban Lorenzano > <estebanlm(a)gmail.com>wrote: > >> On 2010-01-27 11:33:52 -0300, Adrian Lienhard >> <adi(a)netstyle.ch> said: >> >>> Cool, I look forward to it! :) >>> >>> Adrian >>> >>> BTW, don't forget that we also need to host that Pier instance >> somewhere... >> >> mmm... I thought cmsbox would have some functionality to embeed other >> seaside applications (if not pier components)... if is not the case, we >> need to host the application at seasidehosting, I think. >> > > but seasidehosting was VERY slow the last time I use it and...it is sueak > 3.9, not Pharo support (at least as I remember, maybe it changed) > > > >> >> Cheers, >> Esteban >> >>> >>> >>> On Jan 27, 2010, at 15:28 , Esteban Lorenzano wrote: >>> >>>> Let me put the estimated time then: >>>> >>>> first version of loader: this weekend >>>> first version of pier component for displaying metacello configurations >>>> lists and status: one or two weeks after that... >>>> >>>> So, if for "today" you mean "for 1.0rc3 or 1.0 release"... I think the >>>> estimated time is right :) >>>> >>>> Cheers, >>>> Esteban >>>> >>>> On 2010-01-27 11:21:10 -0300, Adrian Lienhard >>>> <adi(a)netstyle.ch> said: >>>> >>>>> Sorry Mariano, apparently I have missed your mail. >>>>> >>>>> Esteban: that sounds cool, but it would be nice to have a simple >>>>> solution that works today! :) >>>>> >>>>> Any takers? >>>>> >>>>> Cheers, >>>>> Adrian >>>>> >>>>> On Jan 27, 2010, at 12:57 , Esteban Lorenzano wrote: >>>>> >>>>>> In fact, that page could be a pier component who scans the repository >>>>>> data (usign the Loader I'm doing)... I can volunteer to make that >>>>>> component, but first let me finish the first version of loader :) >>>>>> >>>>>> Cheers, >>>>>> Esteban, backing from vacations >>>>>> >>>>>> On 2010-01-27 05:16:16 -0300, Mariano Martinez Peck >>>>>> <marianopeck(a)gmail.com> said: >>>>>> >>>>>>> >>>>>>> >>>>>>> Dale: This is really cool. We were just talking about Aida with Stef >> the >>>>>>> other day. Thanks a lot. >>>>>>> >>>>>>> Adrian: I sent an email like a week ago to ask exactly that. Someone >> to >>>>>>> volunteer to update that wiki page with all the metacello >> repositotory >>>>>>> information...but I got no answers. >>>>>>> >>>>>>> On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lienhard >>>>>>> <adi(a)netstyle.ch> wrote: >>>>>>> >>>>>>>> Wow, its great to see all those configurations of external packages >> coming >>>>>>>> in! >>>>>>>> >>>>>>>> I think we need a way to catalog them now. Do we have somebody that >> likes >>>>>>>> to help maintaining this? My idea is to start small, i.e., with a >> wiki page >>>>>>>> similar to >> http://code.google.com/p/pharo/wiki/PackagesTestedInPharo. We >>>>>>>> could have two categories, one "testing" and one "stable". New >>>>>>>> configurations start with testing and when they are known to work >> and their >>>>>>>> tests pass etc. we move them to "stable". >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Adrian >>>>>>>> >>>>>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: >>>>>>>> >>>>>>>>> Gofer new >>>>>>>>> squeaksource: 'MetacelloRepository'; >>>>>>>>> package: 'ConfigurationOfAida'; >>>>>>>>> load. >>>>>>>>> >>>>>>>>> ((Smalltalk at: #ConfigurationOfAida) project version: '6.0') load. >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Pharo-project mailing list >>>>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>>>> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Pharo-project mailing list >>>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>>>> >>>>>>> >>>>>>> >>>>>>> Dale:=A0 This is really cool. We were just talking about Aida with >> Stef the= >>>>>>> other day. Thanks a lot. Adrian: I sent an email like a week >> ago t= >>>>>>> o ask exactly that. Someone to volunteer to update that wiki page >> with all = >>>>>>> the metacello repositotory information...but I got no answers. >>>>>>> <div class=3D"gmail_quote">On Wed, Jan 27, 2010 at 8:56 AM, >> Adrian Lien= >>>>>>> hard <<a >>>>>>> href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.= >>>>>> ch</a>> >>>>>>> >>>>>>> wrote: <blockquote class=3D"gmail_quote" style=3D"bord= >>>>>>> er-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; >> padding-l= >>>>>>> eft: 1ex;"> >>>>>>> Wow, its great to see all those configurations of external packages >> coming = >>>>>>> in! >>>>>>> >>>>>>> I think we need a way to catalog them now. Do we have somebody that >> likes t= >>>>>>> o help maintaining this? My idea is to start small, i.e., with a wiki >> page = >>>>>>> similar to <a href=3D" >> http://code.google.com/p/pharo/wiki/PackagesTestedInP= >>>>>>> haro" target=3D"_blank"> >> http://code.google.com/p/pharo/wiki/PackagesTestedI= >>>>>>> nPharo</a>. We could have two categories, one "testing" and >> one &= >>>>>>> quot;stable". New configurations start with testing and when >> they are = >>>>>>> known to work and their tests pass etc. we move them to >> "stable".= >>>>>>> >>>>>>> >>>>>>> >>>>>>> Cheers, >>>>>>> Adrian >>>>>>> <div><div></div><div class=3D"h5"> >>>>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: >>>>>>> >>>>>>> > Gofer new >>>>>>> > =A0 =A0 =A0 =A0squeaksource: 'MetacelloRepository'; >>>>>>> > =A0 =A0 =A0 =A0package: 'ConfigurationOfAida'; >>>>>>> > =A0 =A0 =A0 =A0load. >>>>>>> > >>>>>>> > ((Smalltalk at: #ConfigurationOfAida) project version: >> '6.0') = >>>>>>> load. >>>>>>> > >>>>>>> > _______________________________________________ >>>>>>> > Pharo-project mailing list >>>>>>> > <a >>>>>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project@l= ists.gforge.inria.fr</a> > <a href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo= -project<http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo=%0A-project> " target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/li= stinfo/pharo-project</a> _______________________________________________ Pharo-project >>>>>>> >>>>>>> mailing list >>>>>>> <a >>>>>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr >> ">Pharo-project(a)lists.= >> gforge.inria.fr</a> >> <a >> >> href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-proj= >> ect" >> >> target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/listinf= >> o/pharo-project<http://lists.gforge.inria.fr/cgi-bin/mailman/listinf=%0Ao/pharo-project> </a> </div></div></ _______________________________________________ Pharo-project mailing >> >>>> list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > <div class=3D"gmail_quote">On Wed, Jan 27, 2010 at 4:20 PM, Esteban= > Lorenzano <<a > href=3D"mailto:estebanlm@gmail.com">est= > ebanlm(a)gmail.com</a>> > wrote: <blockquote class=3D"gmail_quote"= > style=3D"border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.= > 8ex; padding-left: 1ex;"> > On 2010-01-27 11:33:52 -0300, Adrian Lienhard > <<a > href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.ch</a>> > said: > > > Cool, I look forward to it! :) > > > > Adrian > > > > BTW, don't forget that we also need to host that Pier instance som= > ewhere... > > mmm... I thought cmsbox would have some functionality to embeed other > seaside applications (if not pier components)... if is not the case, we > need to host the application at seasidehosting, I think. </blockquote><d= > iv> but seasidehosting was VERY slow the last time I use it and...it is = > sueak 3.9, not Pharo support (at least as I remember, maybe it changed) > =A0</div><blockquote class=3D"gmail_quote" style=3D"border-left: 1px so= > lid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> > > Cheers, > Esteban > > > > > > > On Jan 27, 2010, at 15:28 , Esteban Lorenzano wrote: > > > >> Let me put the estimated time then: > >> > >> first version of loader: this weekend > >> first version of pier component for displaying metacello configura= > tions > >> lists and status: one or two weeks after that... > >> > >> So, if for "today" you mean "for 1.0rc3 or 1.0 rele= > ase"... I think the > >> estimated time is right :) > >> > >> Cheers, > >> Esteban > >> > >> On 2010-01-27 11:21:10 -0300, Adrian Lienhard > >> <<a > href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.ch</a>> > sai= > d: > >> > >>> Sorry Mariano, apparently I have missed your mail. > >>> > >>> Esteban: that sounds cool, but it would be nice to have a simp= > le > >>> solution that works today! :) > >>> > >>> Any takers? > >>> > >>> Cheers, > >>> Adrian > >>> > >>> On Jan 27, 2010, at 12:57 , Esteban Lorenzano wrote: > >>> > >>>> In fact, that page could be a pier component who scans the= > repository > >>>> data (usign the Loader I'm doing)... I can volunteer t= > o make that > >>>> component, but first let me finish the first version of lo= > ader :) > >>>> > >>>> Cheers, > >>>> Esteban, backing from vacations > >>>> > >>>> On 2010-01-27 05:16:16 -0300, Mariano Martinez Peck > >>>> <<a > href=3D"mailto:marianopeck@gmail.com">marianopeck@g= mail.com</a>> > > said: > >>>> > >>>>> > >>>>> > >>>>> Dale: =A0This is really cool. We were just talking abo= > ut Aida with Stef the > >>>>> other day. Thanks a lot. > >>>>> > >>>>> Adrian: I sent an email like a week ago to ask exactly= > that. Someone to > >>>>> volunteer to update that wiki page with all the metace= > llo repositotory > >>>>> information...but I got no answers. > >>>>> > >>>>> On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lienhard > >>>>> <<a > href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.ch= </a>> > > wrote: > >>>>> > >>>>>> Wow, its great to see all those configurations of = > external packages coming > >>>>>> in! > >>>>>> > >>>>>> I think we need a way to catalog them now. Do we h= > ave somebody that likes > >>>>>> to help maintaining this? My idea is to start smal= > l, i.e., with a wiki page > >>>>>> similar to <a href=3D"http://code.google.com/p/pha= > ro/wiki/PackagesTestedInPharo" target=3D"_blank">http://code.google.com/p/p= > haro/wiki/PackagesTestedInPharo</a>. We > >>>>>> could have two categories, one "testing"= > and one "stable". New > >>>>>> configurations start with testing and when they ar= > e known to work and their > >>>>>> tests pass etc. we move them to "stable"= > . > >>>>>> > >>>>>> Cheers, > >>>>>> Adrian > >>>>>> > >>>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote:<b= > r> > >>>>>> > >>>>>>> Gofer new > >>>>>>> squeaksource: 'MetacelloRepository';<b= > r> > >>>>>>> package: 'ConfigurationOfAida'; > >>>>>>> load. > >>>>>>> > >>>>>>> ((Smalltalk at: #ConfigurationOfAida) project = > version: '6.0') load. > >>>>>>> > >>>>>>> ______________________________________________= > _ > >>>>>>> Pharo-project mailing list > >>>>>>> <a > href=3D"mailto:Pharo-project@lists.gforge.i= > nria.fr">Pharo-project(a)lists.gforge.inria.fr</a> >>>>>>> > > <a href=3D"http://lists.gforge.inria.fr/cgi-bi= > n/mailman/listinfo/pharo-project" target=3D"_blank">http://lists.gforge.inr= > ia.fr/cgi-bin/mailman/listinfo/pharo-project</a> > >>>>>> > >>>>>> > >>>>>> _______________________________________________<br= >> > >>>>>> Pharo-project mailing list > >>>>>> <a > href=3D"mailto:Pharo-project@lists.gforge.inria= .fr">Pharo-project(a)lists.gforge.inria.fr</a> >>>>>> > > <a href=3D"http://lists.gforge.inria.fr/cgi-bin/ma= > ilman/listinfo/pharo-project" target=3D"_blank">http://lists.gforge.inria.f= > r/cgi-bin/mailman/listinfo/pharo-project</a> > >>>>>> > >>>>> > >>>>> > >>>>> Dale:=3DA0 This is really cool. We were just talking a= > bout Aida with Stef the=3D > >>>>> other day. Thanks a lot. Adrian: I= > sent an email like a week ago t=3D > >>>>> o ask exactly that. Someone to volunteer to update tha= > t wiki page with all =3D > >>>>> the metacello repositotory information...but I got no = > answers. > >>>>> <div class=3D3D"gmail_quote"&gt= > ;On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lien=3D > >>>>> hard &lt;<a= > > >>>>> href=3D3D"mailto:<a href=3D"mailto:adi@netstyle.c= > h">adi(a)netstyle.ch</a>">adi(a)netstyle.=3D >>>> > > ch</a>&gt; > >>>>> > >>>>> wrote: <blockquote class=3D3D"gmail_q= > uote" style=3D3D"bord=3D > >>>>> er-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt= > 0pt 0.8ex; padding-l=3D > >>>>> eft: 1ex;"> > >>>>> Wow, its great to see all those configurations of exte= > rnal packages coming =3D > >>>>> in! > >>>>> > >>>>> I think we need a way to catalog them now. Do we have = > somebody that likes t=3D > >>>>> o help maintaining this? My idea is to start small, i.= > e., with a wiki page =3D > >>>>> similar to <a href=3D3D"<a href=3D"http://code= > .google.com/p/pharo/wiki/PackagesTestedInP=3D" target=3D"_blank">http://cod= > e.google.com/p/pharo/wiki/PackagesTestedInP=3D</a> > >>>>> haro" target=3D3D"_blank"><a href=3D= > "http://code.google.com/p/pharo/wiki/PackagesTestedI=3D" target=3D"_blank">= > http://code.google.com/p/pharo/wiki/PackagesTestedI=3D</a> > >>>>> nPharo</a>. We could have two categories, one &a= > mp;quot;testing&quot; and one &=3D > >>>>> quot;stable&quot;. New configurations start with t= > esting and when they are =3D > >>>>> known to work and their tests pass etc. we move them t= > o &quot;stable&quot;.=3D > >>>>> > >>>>> > >>>>> > >>>>> Cheers, > >>>>> Adrian<br= > > > >>>>> <div><div></div><div= > class=3D3D"h5"> > >>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote:<br= > > > >>>>> > >>>>> &gt; Gofer new > >>>>> &gt; =3DA0 =3DA0 =3DA0 =3DA0squeaksource: &#39= > ;MetacelloRepository&#39;; > >>>>> &gt; =3DA0 =3DA0 =3DA0 =3DA0package: &#39;Conf= > igurationOfAida&#39;; > >>>>> &gt; =3DA0 =3DA0 =3DA0 =3DA0load. > >>>>> &gt; > >>>>> &gt; ((Smalltalk at: #ConfigurationOfAida) project= > version: &#39;6.0&#39;) =3D > >>>>> load. > >>>>> &gt; > >>>>> &gt; _____________________________________________= > __ > >>>>> &gt; Pharo-project mailing list > >>>>> &gt; <a > >>>>> href=3D3D"mailto:<a href=3D"mailto:Pharo-project@= > lists.gforge.inria.fr">Pharo-project(a)lists.gforge.inria.fr</a>">Pha= ro-project@l=3D <a > > href=3D"http://ists.gforge.inria.fr" target=3D"_blank">ists.gforge.inria= > .fr</a></a> > &gt; > > <a > > href=3D3D"<a href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/list= > info/pharo=3D%0A-project" target=3D"_blank">http://lists.gforge.inria.fr/cg= > i-bin/mailman/listinfo/pharo=3D > -project</a>" > >>>>> > >>>>> target=3D3D"_blank"><a href=3D"http://lis= > ts.gforge.inria.fr/cgi-bin/mailman/li=3D" target=3D"_blank">http://lists.gf= > orge.inria.fr/cgi-bin/mailman/li=3D</a> > >>>>> stinfo/pharo-project</a> > >>>>> > >>>>> > >>>>> _______________________________________________<br&= > gt; > >>>>> Pharo-project mailing list > >>>>> <a > >>>>> href=3D3D"mailto:<a href=3D"mailto:Pharo-project@= > lists.gforge.inria.fr">Pharo-project(a)lists.gforge.inria.fr</a>">Pha= ro-project(a)lists.=3D <a > > href=3D"http://gforge.inria.fr" target=3D"_blank">gforge.inria.fr</a>&lt= > ;/a> > <a > > href=3D3D"<a href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/list= > info/pharo-proj=3D" target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/= > mailman/listinfo/pharo-proj=3D</a> > ect" > > target=3D3D"_blank"><a href=3D"http://lists.gforge.inria.fr/cg= > i-bin/mailman/listinf=3D%0Ao/pharo-project" target=3D"_blank">http://lists.= > gforge.inria.fr/cgi-bin/mailman/listinf=3D > o/pharo-project</a></a> > </div></div></ > > > > > _______________________________________________ > Pharo-project > >>>>> > >> mailing list > >> <a > href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-proje= ct(a)lists.gforge.inria.fr</a> >> > > <a href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/p= > haro-project" target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailma= > n/listinfo/pharo-project</a> > > > > > _______________________________________________ > Pharo-project mailing list > <a > href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project(a)lists.= gforge.inria.fr</a> <a > > href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-proj= > ect" target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/listinf= > o/pharo-project</a> > </blockquote></div> > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] [squeak-dev] [ANN] PDF of Dynamic Web Development with Seaside

by StÃ©phane Ducasse

On Jan 27, 2010, at 3:04 PM, Mariano Martinez Peck wrote: > Maybe add a post in the news section of the pharo website ? yes > and also in the news section of the ESUG website ? yes > > Thanks and congratulations for such effort. > > Mariano > > On Wed, Jan 27, 2010 at 2:49 PM, Lukas Renggli <renggli(a)gmail.com> wrote: > The PDF version of the book "Dynamic Web Development with Seaside" is > available for download now: > > http://book.seaside.st/book/introduction/pdf-book > > At the end of the payment process (PayPal) you will be redirected to > the download area where you are able to get the latest builds of the > PDF version of the book. If you bookmark the page you will be able to > download fixes and extra chapters as we integrate them into the online > version. By buying the PDF version you support our hard work on the > book. > > We wish to thank the European Smalltalk User Group (ESUG), > inceptive.be, Cincom Smalltalk and GemStone Smalltalk for generously > sponsoring this book. We are looking for additional sponsors. If you > are interested, please contact us. If you are a publisher and > interested in publishing this material, please let us know. > > Please distribute this message widely. > > Cheers, > Stef & Lukas > > -- > Lukas Renggli > http://www.lukas-renggli.ch > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508?

by Adrian Lienhard

Do you see a simple solution to work around the problem in 1.0? Adrian On Jan 27, 2010, at 16:05 , Schwab,Wilhelm K wrote: > That change reduces the problems, but it does not eliminate it because there are sill paths to IPv6-specific code that is "unprotected." The primitive(s) in question fail if IPv6 is not available, in fact, the need to use IPv4 is detected by watching a primitive fail. We then turn around later and call that same primitive w/o checking #useOldNetwork, hence the defect on non-IPv6 machines. > > The code is very complicated and should be factored into separate classes to group the primitive with the protocols they serve. > > Bill > > > > -----Original Message----- > From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of Adrian Lienhard > Sent: Wednesday, January 27, 2010 9:31 AM > To: Pharo-project(a)lists.gforge.inria.fr > Subject: Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508? > > Between 10454 and 10508 I switched to useOldNetwork => true. Probably that makes the difference. Fixes are welcome! > > Cheers, > Adrian > > On Jan 27, 2010, at 15:10 , Schwab,Wilhelm K wrote: > >> Probably. We need to ensure that all of the IPv6 primitives are protected with #useOldNetwork, and they are not at present. I started to split NetNameResolver into absract base and 4/6-specific subclasses, but was distracted from it. Something like that would help a lot. >> >> Bill >> >> >> >> ________________________________ >> From: pharo-project-bounces(a)lists.gforge.inria.fr >> [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of >> Mariano Martinez Peck >> Sent: Wednesday, January 27, 2010 9:00 AM >> To: Pharo-project(a)lists.gforge.inria.fr >> Subject: Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508? >> >> Yes, I can reproduce it in my Mac Os box...however, wasn't it the same problem of the network that we already have ? >> NetNameResolver useOldNetwork etc .. ? >> >> 2010/1/27 Miguel Enrique CobÃ¡ Martinez >> <miguel.coba(a)gmail.com<mailto:miguel.coba@gmail.com>> >> El mar, 26-01-2010 a las 17:14 -0600, Miguel Enrique CobÃ¡ Martinez >> escribiÃ³: >>> Hi all, >>> >>> yesterday, in some of that "why did I do that today" I decided to add >>> a partition to my ext3 fs over LUKS encrypted over LVM over disk >>> partitions Debian install. Well, things went far from ok, and the >>> result I lost all the information (it is really encrypted, :(). I had >>> a backup so nothing important was lost. Or that I thought. Because >>> after reinstalling and trying to install the squeakvm I noticed that >>> the squeak vm .deb file from: >>> >>> http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.deb >>> >>> is not more available. I'm sure there are good reasons to remove that >>> file. But for me that was the squeak vm that I was using (and the one >>> you reach if you follow the links from pharo-download page and the >>> one you'll try to download if you use a Debian derived distro...). >>> >>> The case is that isn't available. So I got the tar.gz for i386 (there >>> isn't amd64 package, but I have ia32-libs installed): >>> >>> http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.tar.gz >>> >>> and by using this vm I have a problem that I hadn't before: >>> >>> In a PharoCore 10508 image evaluate this: >>> >>> NetNameResolver addressForName: 'www.yahoo.com<http://www.yahoo.com>' >>> >>> I get: >>> >>> Error: primitive has failed >>> >>> in NetNameResolver class>>primGetNameInfo:flags >>> >>> Also >>> >>> NetNameResolver primGetNameInfoHostSize >>> >>> gives the same error but in: >>> >>> in NetNameResolver class>>primGetNameInfoHostSize. >>> >>> First I though that was the change of vm but then, using the same vm >>> I opened an old image: >>> >>> Pharo1.0beta >>> Latest update: #10454 >>> >>> and there all works correctly. >>> >>> Can someone confirm this bug so that I can add an issue in the traker. >>> >>> Or maybe point to something that I am doing wrong. >>> >>> I repeat, the data: >>> >>> vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc 4.3.3 >>> image: PharoCore 10508 >>> result: failed >>> >>> vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc 4.3.3 >>> image: PharoCore 10454 >>> result: worked >>> >>> Thanks >> >> Anybody can confirm? or is only me? >> >> -- >> Miguel CobÃ¡ >> http://miguel.leugim.com.mx >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr<mailto:Pharo-project@lists.gforge. >> inria.fr> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] Metacello Catalog [was: Re: ConfigurationOfAida is available]

by Mariano Martinez Peck

On Wed, Jan 27, 2010 at 4:20 PM, Esteban Lorenzano <estebanlm(a)gmail.com>wrote: > On 2010-01-27 11:33:52 -0300, Adrian Lienhard > <adi(a)netstyle.ch> said: > > > Cool, I look forward to it! :) > > > > Adrian > > > > BTW, don't forget that we also need to host that Pier instance > somewhere... > > mmm... I thought cmsbox would have some functionality to embeed other > seaside applications (if not pier components)... if is not the case, we > need to host the application at seasidehosting, I think. > but seasidehosting was VERY slow the last time I use it and...it is sueak 3.9, not Pharo support (at least as I remember, maybe it changed) > > Cheers, > Esteban > > > > > > > On Jan 27, 2010, at 15:28 , Esteban Lorenzano wrote: > > > >> Let me put the estimated time then: > >> > >> first version of loader: this weekend > >> first version of pier component for displaying metacello configurations > >> lists and status: one or two weeks after that... > >> > >> So, if for "today" you mean "for 1.0rc3 or 1.0 release"... I think the > >> estimated time is right :) > >> > >> Cheers, > >> Esteban > >> > >> On 2010-01-27 11:21:10 -0300, Adrian Lienhard > >> <adi(a)netstyle.ch> said: > >> > >>> Sorry Mariano, apparently I have missed your mail. > >>> > >>> Esteban: that sounds cool, but it would be nice to have a simple > >>> solution that works today! :) > >>> > >>> Any takers? > >>> > >>> Cheers, > >>> Adrian > >>> > >>> On Jan 27, 2010, at 12:57 , Esteban Lorenzano wrote: > >>> > >>>> In fact, that page could be a pier component who scans the repository > >>>> data (usign the Loader I'm doing)... I can volunteer to make that > >>>> component, but first let me finish the first version of loader :) > >>>> > >>>> Cheers, > >>>> Esteban, backing from vacations > >>>> > >>>> On 2010-01-27 05:16:16 -0300, Mariano Martinez Peck > >>>> <marianopeck(a)gmail.com> said: > >>>> > >>>>> > >>>>> > >>>>> Dale: This is really cool. We were just talking about Aida with Stef > the > >>>>> other day. Thanks a lot. > >>>>> > >>>>> Adrian: I sent an email like a week ago to ask exactly that. Someone > to > >>>>> volunteer to update that wiki page with all the metacello > repositotory > >>>>> information...but I got no answers. > >>>>> > >>>>> On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lienhard > >>>>> <adi(a)netstyle.ch> wrote: > >>>>> > >>>>>> Wow, its great to see all those configurations of external packages > coming > >>>>>> in! > >>>>>> > >>>>>> I think we need a way to catalog them now. Do we have somebody that > likes > >>>>>> to help maintaining this? My idea is to start small, i.e., with a > wiki page > >>>>>> similar to > http://code.google.com/p/pharo/wiki/PackagesTestedInPharo. We > >>>>>> could have two categories, one "testing" and one "stable". New > >>>>>> configurations start with testing and when they are known to work > and their > >>>>>> tests pass etc. we move them to "stable". > >>>>>> > >>>>>> Cheers, > >>>>>> Adrian > >>>>>> > >>>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: > >>>>>> > >>>>>>> Gofer new > >>>>>>> squeaksource: 'MetacelloRepository'; > >>>>>>> package: 'ConfigurationOfAida'; > >>>>>>> load. > >>>>>>> > >>>>>>> ((Smalltalk at: #ConfigurationOfAida) project version: '6.0') load. > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Pharo-project mailing list > >>>>>>> Pharo-project(a)lists.gforge.inria.fr > >>>>>>> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Pharo-project mailing list > >>>>>> Pharo-project(a)lists.gforge.inria.fr > >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >>>>>> > >>>>> > >>>>> > >>>>> Dale:=A0 This is really cool. We were just talking about Aida with > Stef the= > >>>>> other day. Thanks a lot. Adrian: I sent an email like a week > ago t= > >>>>> o ask exactly that. Someone to volunteer to update that wiki page > with all = > >>>>> the metacello repositotory information...but I got no answers. > >>>>> <div class=3D"gmail_quote">On Wed, Jan 27, 2010 at 8:56 AM, > Adrian Lien= > >>>>> hard <<a > >>>>> href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.= > >>>> ch</a>> > >>>>> > >>>>> wrote: <blockquote class=3D"gmail_quote" style=3D"bord= > >>>>> er-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; > padding-l= > >>>>> eft: 1ex;"> > >>>>> Wow, its great to see all those configurations of external packages > coming = > >>>>> in! > >>>>> > >>>>> I think we need a way to catalog them now. Do we have somebody that > likes t= > >>>>> o help maintaining this? My idea is to start small, i.e., with a wiki > page = > >>>>> similar to <a href=3D" > http://code.google.com/p/pharo/wiki/PackagesTestedInP= > >>>>> haro" target=3D"_blank"> > http://code.google.com/p/pharo/wiki/PackagesTestedI= > >>>>> nPharo</a>. We could have two categories, one "testing" and > one &= > >>>>> quot;stable". New configurations start with testing and when > they are = > >>>>> known to work and their tests pass etc. we move them to > "stable".= > >>>>> > >>>>> > >>>>> > >>>>> Cheers, > >>>>> Adrian > >>>>> <div><div></div><div class=3D"h5"> > >>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: > >>>>> > >>>>> > Gofer new > >>>>> > =A0 =A0 =A0 =A0squeaksource: 'MetacelloRepository'; > >>>>> > =A0 =A0 =A0 =A0package: 'ConfigurationOfAida'; > >>>>> > =A0 =A0 =A0 =A0load. > >>>>> > > >>>>> > ((Smalltalk at: #ConfigurationOfAida) project version: > '6.0') = > >>>>> load. > >>>>> > > >>>>> > _______________________________________________ > >>>>> > Pharo-project mailing list > >>>>> > <a > >>>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project@l= > ists.gforge.inria.fr</a> > > > > <a > > href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo= > -project<http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo=%0A-project> > " > >>>>> > >>>>> target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/li= > >>>>> stinfo/pharo-project</a> > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> Pharo-project mailing list > >>>>> <a > >>>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr > ">Pharo-project(a)lists.= > gforge.inria.fr</a> > <a > > href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-proj= > ect" > > target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/listinf= > o/pharo-project<http://lists.gforge.inria.fr/cgi-bin/mailman/listinf=%0Ao/pharo-project> > </a> > </div></div></ > > > > > _______________________________________________ > Pharo-project > >>>>> > >> mailing list > >> Pharo-project(a)lists.gforge.inria.fr > >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Jan. 27, 2010

[Pharo-project] Metacello Catalog [was: Re: ConfigurationOfAida is available]

by Esteban Lorenzano

On 2010-01-27 11:33:52 -0300, Adrian Lienhard <adi(a)netstyle.ch> said: > Cool, I look forward to it! :) > > Adrian > > BTW, don't forget that we also need to host that Pier instance somewhere... mmm... I thought cmsbox would have some functionality to embeed other seaside applications (if not pier components)... if is not the case, we need to host the application at seasidehosting, I think. Cheers, Esteban > > > On Jan 27, 2010, at 15:28 , Esteban Lorenzano wrote: > >> Let me put the estimated time then: >> >> first version of loader: this weekend >> first version of pier component for displaying metacello configurations >> lists and status: one or two weeks after that... >> >> So, if for "today" you mean "for 1.0rc3 or 1.0 release"... I think the >> estimated time is right :) >> >> Cheers, >> Esteban >> >> On 2010-01-27 11:21:10 -0300, Adrian Lienhard >> <adi(a)netstyle.ch> said: >> >>> Sorry Mariano, apparently I have missed your mail. >>> >>> Esteban: that sounds cool, but it would be nice to have a simple >>> solution that works today! :) >>> >>> Any takers? >>> >>> Cheers, >>> Adrian >>> >>> On Jan 27, 2010, at 12:57 , Esteban Lorenzano wrote: >>> >>>> In fact, that page could be a pier component who scans the repository >>>> data (usign the Loader I'm doing)... I can volunteer to make that >>>> component, but first let me finish the first version of loader :) >>>> >>>> Cheers, >>>> Esteban, backing from vacations >>>> >>>> On 2010-01-27 05:16:16 -0300, Mariano Martinez Peck >>>> <marianopeck(a)gmail.com> said: >>>> >>>>> >>>>> >>>>> Dale: This is really cool. We were just talking about Aida with Stef the >>>>> other day. Thanks a lot. >>>>> >>>>> Adrian: I sent an email like a week ago to ask exactly that. Someone to >>>>> volunteer to update that wiki page with all the metacello repositotory >>>>> information...but I got no answers. >>>>> >>>>> On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lienhard >>>>> <adi(a)netstyle.ch> wrote: >>>>> >>>>>> Wow, its great to see all those configurations of external packages coming >>>>>> in! >>>>>> >>>>>> I think we need a way to catalog them now. Do we have somebody that likes >>>>>> to help maintaining this? My idea is to start small, i.e., with a wiki page >>>>>> similar to http://code.google.com/p/pharo/wiki/PackagesTestedInPharo. We >>>>>> could have two categories, one "testing" and one "stable". New >>>>>> configurations start with testing and when they are known to work and their >>>>>> tests pass etc. we move them to "stable". >>>>>> >>>>>> Cheers, >>>>>> Adrian >>>>>> >>>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: >>>>>> >>>>>>> Gofer new >>>>>>> squeaksource: 'MetacelloRepository'; >>>>>>> package: 'ConfigurationOfAida'; >>>>>>> load. >>>>>>> >>>>>>> ((Smalltalk at: #ConfigurationOfAida) project version: '6.0') load. >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Pharo-project mailing list >>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Pharo-project mailing list >>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>> >>>>> >>>>> >>>>> Dale:=A0 This is really cool. We were just talking about Aida with Stef the= >>>>> other day. Thanks a lot. Adrian: I sent an email like a week ago t= >>>>> o ask exactly that. Someone to volunteer to update that wiki page with all = >>>>> the metacello repositotory information...but I got no answers. >>>>> <div class=3D"gmail_quote">On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lien= >>>>> hard <<a >>>>> href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.= >>>> ch</a>> >>>>> >>>>> wrote: <blockquote class=3D"gmail_quote" style=3D"bord= >>>>> er-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-l= >>>>> eft: 1ex;"> >>>>> Wow, its great to see all those configurations of external packages coming = >>>>> in! >>>>> >>>>> I think we need a way to catalog them now. Do we have somebody that likes t= >>>>> o help maintaining this? My idea is to start small, i.e., with a wiki page = >>>>> similar to <a href=3D"http://code.google.com/p/pharo/wiki/PackagesTestedInP= >>>>> haro" target=3D"_blank">http://code.google.com/p/pharo/wiki/PackagesTestedI= >>>>> nPharo</a>. We could have two categories, one "testing" and one &= >>>>> quot;stable". New configurations start with testing and when they are = >>>>> known to work and their tests pass etc. we move them to "stable".= >>>>> >>>>> >>>>> >>>>> Cheers, >>>>> Adrian >>>>> <div><div></div><div class=3D"h5"> >>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: >>>>> >>>>> > Gofer new >>>>> > =A0 =A0 =A0 =A0squeaksource: 'MetacelloRepository'; >>>>> > =A0 =A0 =A0 =A0package: 'ConfigurationOfAida'; >>>>> > =A0 =A0 =A0 =A0load. >>>>> > >>>>> > ((Smalltalk at: #ConfigurationOfAida) project version: '6.0') = >>>>> load. >>>>> > >>>>> > _______________________________________________ >>>>> > Pharo-project mailing list >>>>> > <a >>>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project@l= ists.gforge.inria.fr</a> > <a href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo= -project" >>>>> >>>>> target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/li= >>>>> stinfo/pharo-project</a> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> <a >>>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project(a)lists.= gforge.inria.fr</a> <a href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-proj= ect" target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/listinf= o/pharo-project</a> </div></div></ _______________________________________________ Pharo-project >>>>> >> mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508?

by Schwab,Wilhelm K

That change reduces the problems, but it does not eliminate it because there are sill paths to IPv6-specific code that is "unprotected." The primitive(s) in question fail if IPv6 is not available, in fact, the need to use IPv4 is detected by watching a primitive fail. We then turn around later and call that same primitive w/o checking #useOldNetwork, hence the defect on non-IPv6 machines. The code is very complicated and should be factored into separate classes to group the primitive with the protocols they serve. Bill -----Original Message----- From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of Adrian Lienhard Sent: Wednesday, January 27, 2010 9:31 AM To: Pharo-project(a)lists.gforge.inria.fr Subject: Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508? Between 10454 and 10508 I switched to useOldNetwork => true. Probably that makes the difference. Fixes are welcome! Cheers, Adrian On Jan 27, 2010, at 15:10 , Schwab,Wilhelm K wrote: > Probably. We need to ensure that all of the IPv6 primitives are protected with #useOldNetwork, and they are not at present. I started to split NetNameResolver into absract base and 4/6-specific subclasses, but was distracted from it. Something like that would help a lot. > > Bill > > > > ________________________________ > From: pharo-project-bounces(a)lists.gforge.inria.fr > [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of > Mariano Martinez Peck > Sent: Wednesday, January 27, 2010 9:00 AM > To: Pharo-project(a)lists.gforge.inria.fr > Subject: Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508? > > Yes, I can reproduce it in my Mac Os box...however, wasn't it the same problem of the network that we already have ? > NetNameResolver useOldNetwork etc .. ? > > 2010/1/27 Miguel Enrique CobÃ¡ Martinez > <miguel.coba(a)gmail.com<mailto:miguel.coba@gmail.com>> > El mar, 26-01-2010 a las 17:14 -0600, Miguel Enrique CobÃ¡ Martinez > escribiÃ³: >> Hi all, >> >> yesterday, in some of that "why did I do that today" I decided to add >> a partition to my ext3 fs over LUKS encrypted over LVM over disk >> partitions Debian install. Well, things went far from ok, and the >> result I lost all the information (it is really encrypted, :(). I had >> a backup so nothing important was lost. Or that I thought. Because >> after reinstalling and trying to install the squeakvm I noticed that >> the squeak vm .deb file from: >> >> http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.deb >> >> is not more available. I'm sure there are good reasons to remove that >> file. But for me that was the squeak vm that I was using (and the one >> you reach if you follow the links from pharo-download page and the >> one you'll try to download if you use a Debian derived distro...). >> >> The case is that isn't available. So I got the tar.gz for i386 (there >> isn't amd64 package, but I have ia32-libs installed): >> >> http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.tar.gz >> >> and by using this vm I have a problem that I hadn't before: >> >> In a PharoCore 10508 image evaluate this: >> >> NetNameResolver addressForName: 'www.yahoo.com<http://www.yahoo.com>' >> >> I get: >> >> Error: primitive has failed >> >> in NetNameResolver class>>primGetNameInfo:flags >> >> Also >> >> NetNameResolver primGetNameInfoHostSize >> >> gives the same error but in: >> >> in NetNameResolver class>>primGetNameInfoHostSize. >> >> First I though that was the change of vm but then, using the same vm >> I opened an old image: >> >> Pharo1.0beta >> Latest update: #10454 >> >> and there all works correctly. >> >> Can someone confirm this bug so that I can add an issue in the traker. >> >> Or maybe point to something that I am doing wrong. >> >> I repeat, the data: >> >> vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc 4.3.3 >> image: PharoCore 10508 >> result: failed >> >> vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc 4.3.3 >> image: PharoCore 10454 >> result: worked >> >> Thanks > > Anybody can confirm? or is only me? > > -- > Miguel CobÃ¡ > http://miguel.leugim.com.mx > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr<mailto:Pharo-project@lists.gforge. > inria.fr> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508?

by Schwab,Wilhelm K

The best I can figure out: you have the error because IPv6 primitives are called despite #useOldNetwork being rigged to answer true. -----Original Message----- From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of Miguel Enrique CobÃ¡ Martinez Sent: Wednesday, January 27, 2010 9:30 AM To: Pharo-project(a)lists.gforge.inria.fr Subject: Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508? El miÃ©, 27-01-2010 a las 14:59 +0100, Mariano Martinez Peck escribiÃ³: > Yes, I can reproduce it in my Mac Os box...however, wasn't it the same > problem of the network that we already have ? > NetNameResolver useOldNetwork etc .. ? I have useOldNetwork true in NetNameResolver but I have the same error. :( Thanks anyway > > 2010/1/27 Miguel Enrique CobÃ¡ Martinez <miguel.coba(a)gmail.com> > El mar, 26-01-2010 a las 17:14 -0600, Miguel Enrique CobÃ¡ > Martinez > escribiÃ³: > > > Hi all, > > > > yesterday, in some of that "why did I do that today" I > decided to add a > > partition to my ext3 fs over LUKS encrypted over LVM over > disk > > partitions Debian install. Well, things went far from ok, > and the result > > I lost all the information (it is really encrypted, :(). I > had a backup > > so nothing important was lost. Or that I thought. Because > after > > reinstalling and trying to install the squeakvm I noticed > that the > > squeak vm .deb file from: > > > > > http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.deb > > > > is not more available. I'm sure there are good reasons to > remove that > > file. But for me that was the squeak vm that I was using > (and the one > > you reach if you follow the links from pharo-download page > and the one > > you'll try to download if you use a Debian derived > distro...). > > > > The case is that isn't available. So I got the tar.gz for > i386 (there > > isn't amd64 package, but I have ia32-libs installed): > > > > > http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.tar.gz > > > > and by using this vm I have a problem that I hadn't before: > > > > In a PharoCore 10508 image evaluate this: > > > > NetNameResolver addressForName: 'www.yahoo.com' > > > > I get: > > > > Error: primitive has failed > > > > in NetNameResolver class>>primGetNameInfo:flags > > > > Also > > > > NetNameResolver primGetNameInfoHostSize > > > > gives the same error but in: > > > > in NetNameResolver class>>primGetNameInfoHostSize. > > > > First I though that was the change of vm but then, using the > same vm I > > opened an old image: > > > > Pharo1.0beta > > Latest update: #10454 > > > > and there all works correctly. > > > > Can someone confirm this bug so that I can add an issue in > the traker. > > > > Or maybe point to something that I am doing wrong. > > > > I repeat, the data: > > > > vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc > 4.3.3 > > image: PharoCore 10508 > > result: failed > > > > vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc > 4.3.3 > > image: PharoCore 10454 > > result: worked > > > > Thanks > > > Anybody can confirm? or is only me? > > > -- > Miguel CobÃ¡ > http://miguel.leugim.com.mx > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project -- Miguel CobÃ¡ http://miguel.leugim.com.mx _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] ConfigurationOfAida is available

by Adrian Lienhard

Cool, I look forward to it! :) Adrian BTW, don't forget that we also need to host that Pier instance somewhere... On Jan 27, 2010, at 15:28 , Esteban Lorenzano wrote: > Let me put the estimated time then: > > first version of loader: this weekend > first version of pier component for displaying metacello configurations > lists and status: one or two weeks after that... > > So, if for "today" you mean "for 1.0rc3 or 1.0 release"... I think the > estimated time is right :) > > Cheers, > Esteban > > On 2010-01-27 11:21:10 -0300, Adrian Lienhard > <adi(a)netstyle.ch> said: > >> Sorry Mariano, apparently I have missed your mail. >> >> Esteban: that sounds cool, but it would be nice to have a simple >> solution that works today! :) >> >> Any takers? >> >> Cheers, >> Adrian >> >> On Jan 27, 2010, at 12:57 , Esteban Lorenzano wrote: >> >>> In fact, that page could be a pier component who scans the repository >>> data (usign the Loader I'm doing)... I can volunteer to make that >>> component, but first let me finish the first version of loader :) >>> >>> Cheers, >>> Esteban, backing from vacations >>> >>> On 2010-01-27 05:16:16 -0300, Mariano Martinez Peck >>> <marianopeck(a)gmail.com> said: >>> >>>> >>>> >>>> Dale: This is really cool. We were just talking about Aida with Stef the >>>> other day. Thanks a lot. >>>> >>>> Adrian: I sent an email like a week ago to ask exactly that. Someone to >>>> volunteer to update that wiki page with all the metacello repositotory >>>> information...but I got no answers. >>>> >>>> On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lienhard >>>> <adi(a)netstyle.ch> wrote: >>>> >>>>> Wow, its great to see all those configurations of external packages coming >>>>> in! >>>>> >>>>> I think we need a way to catalog them now. Do we have somebody that likes >>>>> to help maintaining this? My idea is to start small, i.e., with a wiki page >>>>> similar to http://code.google.com/p/pharo/wiki/PackagesTestedInPharo. We >>>>> could have two categories, one "testing" and one "stable". New >>>>> configurations start with testing and when they are known to work and their >>>>> tests pass etc. we move them to "stable". >>>>> >>>>> Cheers, >>>>> Adrian >>>>> >>>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: >>>>> >>>>>> Gofer new >>>>>> squeaksource: 'MetacelloRepository'; >>>>>> package: 'ConfigurationOfAida'; >>>>>> load. >>>>>> >>>>>> ((Smalltalk at: #ConfigurationOfAida) project version: '6.0') load. >>>>>> >>>>>> _______________________________________________ >>>>>> Pharo-project mailing list >>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>> >>>> >>>> Dale:=A0 This is really cool. We were just talking about Aida with Stef the= >>>> other day. Thanks a lot. Adrian: I sent an email like a week ago t= >>>> o ask exactly that. Someone to volunteer to update that wiki page with all = >>>> the metacello repositotory information...but I got no answers. >>>> <div class=3D"gmail_quote">On Wed, Jan 27, 2010 at 8:56 AM, Adrian Lien= >>>> hard <<a >>>> href=3D"mailto:adi@netstyle.ch">adi(a)netstyle.= >>> ch</a>> >>>> >>>> wrote: <blockquote class=3D"gmail_quote" style=3D"bord= >>>> er-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-l= >>>> eft: 1ex;"> >>>> Wow, its great to see all those configurations of external packages coming = >>>> in! >>>> >>>> I think we need a way to catalog them now. Do we have somebody that likes t= >>>> o help maintaining this? My idea is to start small, i.e., with a wiki page = >>>> similar to <a href=3D"http://code.google.com/p/pharo/wiki/PackagesTestedInP= >>>> haro" target=3D"_blank">http://code.google.com/p/pharo/wiki/PackagesTestedI= >>>> nPharo</a>. We could have two categories, one "testing" and one &= >>>> quot;stable". New configurations start with testing and when they are = >>>> known to work and their tests pass etc. we move them to "stable".= >>>> >>>> >>>> >>>> Cheers, >>>> Adrian >>>> <div><div></div><div class=3D"h5"> >>>> On Jan 27, 2010, at 04:22 , Dale Henrichs wrote: >>>> >>>> > Gofer new >>>> > =A0 =A0 =A0 =A0squeaksource: 'MetacelloRepository'; >>>> > =A0 =A0 =A0 =A0package: 'ConfigurationOfAida'; >>>> > =A0 =A0 =A0 =A0load. >>>> > >>>> > ((Smalltalk at: #ConfigurationOfAida) project version: '6.0') = >>>> load. >>>> > >>>> > _______________________________________________ >>>> > Pharo-project mailing list >>>> > <a >>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project@l= > ists.gforge.inria.fr</a> > > > > <a >>>> >>>> href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo= >>>> -project" target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/li= >>>> stinfo/pharo-project</a> >>>> >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> <a >>>> href=3D"mailto:Pharo-project@lists.gforge.inria.fr">Pharo-project(a)lists.= > gforge.inria.fr</a> > <a > > href=3D"http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-proj= > ect" >>>> >>>> target=3D"_blank">http://lists.gforge.inria.fr/cgi-bin/mailman/listinf= >>>> o/pharo-project</a> >>>> </div></div></ > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508?

by Adrian Lienhard

Between 10454 and 10508 I switched to useOldNetwork => true. Probably that makes the difference. Fixes are welcome! Cheers, Adrian On Jan 27, 2010, at 15:10 , Schwab,Wilhelm K wrote: > Probably. We need to ensure that all of the IPv6 primitives are protected with #useOldNetwork, and they are not at present. I started to split NetNameResolver into absract base and 4/6-specific subclasses, but was distracted from it. Something like that would help a lot. > > Bill > > > > ________________________________ > From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of Mariano Martinez Peck > Sent: Wednesday, January 27, 2010 9:00 AM > To: Pharo-project(a)lists.gforge.inria.fr > Subject: Re: [Pharo-project] Bug in NetNameResolver on PharoCore 10508? > > Yes, I can reproduce it in my Mac Os box...however, wasn't it the same problem of the network that we already have ? > NetNameResolver useOldNetwork etc .. ? > > 2010/1/27 Miguel Enrique CobÃ¡ Martinez <miguel.coba(a)gmail.com<mailto:miguel.coba@gmail.com>> > El mar, 26-01-2010 a las 17:14 -0600, Miguel Enrique CobÃ¡ Martinez > escribiÃ³: >> Hi all, >> >> yesterday, in some of that "why did I do that today" I decided to add a >> partition to my ext3 fs over LUKS encrypted over LVM over disk >> partitions Debian install. Well, things went far from ok, and the result >> I lost all the information (it is really encrypted, :(). I had a backup >> so nothing important was lost. Or that I thought. Because after >> reinstalling and trying to install the squeakvm I noticed that the >> squeak vm .deb file from: >> >> http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.deb >> >> is not more available. I'm sure there are good reasons to remove that >> file. But for me that was the squeak vm that I was using (and the one >> you reach if you follow the links from pharo-download page and the one >> you'll try to download if you use a Debian derived distro...). >> >> The case is that isn't available. So I got the tar.gz for i386 (there >> isn't amd64 package, but I have ia32-libs installed): >> >> http://squeakvm.org/unix/release/Squeak-3.11.3.2135-linux_i386.tar.gz >> >> and by using this vm I have a problem that I hadn't before: >> >> In a PharoCore 10508 image evaluate this: >> >> NetNameResolver addressForName: 'www.yahoo.com<http://www.yahoo.com>' >> >> I get: >> >> Error: primitive has failed >> >> in NetNameResolver class>>primGetNameInfo:flags >> >> Also >> >> NetNameResolver primGetNameInfoHostSize >> >> gives the same error but in: >> >> in NetNameResolver class>>primGetNameInfoHostSize. >> >> First I though that was the change of vm but then, using the same vm I >> opened an old image: >> >> Pharo1.0beta >> Latest update: #10454 >> >> and there all works correctly. >> >> Can someone confirm this bug so that I can add an issue in the traker. >> >> Or maybe point to something that I am doing wrong. >> >> I repeat, the data: >> >> vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc 4.3.3 >> image: PharoCore 10508 >> result: failed >> >> vm: 3.11.3-2135 #1 XShm Wed Sep 16 14:25:10 PDT 2009 gcc 4.3.3 >> image: PharoCore 10454 >> result: worked >> >> Thanks > > Anybody can confirm? or is only me? > > -- > Miguel CobÃ¡ > http://miguel.leugim.com.mx > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr<mailto:Pharo-project@lists.gforge.inria.fr> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Jan. 27, 2010

Re: [Pharo-project] [BetaTesting] [ANN] Pharo1.0-10505-rc1dev10.01.1 timing and code simulation error bug

by Mariano Martinez Peck

On Mon, Jan 11, 2010 at 3:41 PM, Stan Shepherd <stan.shepherd414(a)gmail.com>wrote: > > > Mariano Martinez Peck wrote: > > > > On Mon, Jan 11, 2010 at 12:31 PM, Schwab,Wilhelm K > > <bschwab(a)anest.ufl.edu>wrote: > > > >> It would be cool if it didn't take 3+ hours to load. 2.8 is much more > >> reasonable. Is 3 that much bigger, or is something wrong with the > >> configuration? > >> > Stan: Can you test this again with the RC2 image? It will use a new Metacello version that uses a feature of Gofer that does some cache..and etc.. So, it should be much better. Can you test it and let me know? Thanks Mariano > >> > >> > > Yes, it cannot take 3 hours. In my case, it takes no more than 15 > minutes. > > Stan: the old machine was with Windows? do you have any antivirus working > > like NOD32 or something like that ? > > > > > > > >> > >> -----Original Message----- > >> From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto: > >> pharo-project-bounces(a)lists.gforge.inria.fr] On Behalf Of Stan Shepherd > >> Sent: Monday, January 11, 2010 4:38 AM > >> To: pharo-project(a)lists.gforge.inria.fr > >> Subject: Re: [Pharo-project] [BetaTesting] [ANN] > >> Pharo1.0-10505-rc1dev10.01.1 > >> > >> > >> > >> Mariano Martinez Peck wrote: > >> > > >> > On Sun, Jan 10, 2010 at 9:02 PM, Stan Shepherd > >> > <stan.shepherd414(a)gmail.com>wrote: > >> > > >> >> The only concern is that it took some hours > >> > > >> > > >> > hours ? seriously ? > >> > > >> > > >> >> to download and install Seaside > >> >> (albeit on a slow spare PC). And with occassional network glitches, I > >> >> had to restart a method a few times from a debugger. > >> > > >> > >> Yes, it was 3 hr 29m on the old machine, but I don't know what percent > it > >> was halted due to network glitches. It would be really cool if it made > >> say 3 > >> retries when its HTTP gets failed. > >> > >> I ran overnight on main machine (Ubuntu 9.04, 3 GHz dual core 1GB ram, > >> nominal 7Gb internet but other downloads running) with message tally - > 71 > >> minutes. > >> > >> ...Stan > >> > >> -- > >> View this message in context: > >> > http://n2.nabble.com/BetaTesting-ANN-Pharo1-0-10505-rc1dev10-01-1-tp4278312… > >> Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > >> > > > > Hi, don't get too hung up on the 3 hr+, it's a really old machine running > Xubuntu I use to test my stuff runs lean. Better to look at the 'normal' > machine's time of 71 minutes, vs 15. Ubuntu, with no nasties running. > > I previously reported that I find System update slow. > > Mariano, do you run in a folder with a package cache present? I run in a > clean install, so it has to download everything. > > The process I use: > create new folder seaside3buildTest2 > paste and unzip a Seaside-3.0a5.app.zip one click > http://n2.nabble.com/file/n4285691/loadprocess.txt loadprocess.txt , to > have > a full environment > paste and unzip pharo1.0-10505-rc1dev10.01.1.zip > copy pharo1.0-10505-rc1dev10.01.1.image .changes into Resources folder > delete Seaside.image, .changes > edit Seaside.sh to be pharo1.0-10505-rc1dev10.01.1.sh, opening > pharo1.0-10505-rc1dev10.01.1.image > pharo1.0-10505-rc1dev10.01.1.sh open with sh > > I find it most convenient to start with a one click image like that. > > MessageTally attached. > > Also found my first bug: > > MessageTally tallySends: [Gofer new > squeaksource: 'MetacelloRepository'; > package: 'ConfigurationOfRefactoringBrowser'; > load]. > > Throws code simulation error > > in > Project class>>spawnNewProcess > > UIProcess := [ > [World doOneCycle. Processor yield. false] whileFalse: []. > ] newProcess priority: Processor userSchedulingPriority. > UIProcess resume > > > ...Stan > > > > > -- > View this message in context: > http://n2.nabble.com/BetaTesting-ANN-Pharo1-0-10505-rc1dev10-01-1-tp4278312… > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Jan. 27, 2010