- Pharo-dev - lists.pharo.org

Re: [Pharo-project] apparently recentMessages does not get the latest changes after

by Igor Stasenko

did you meant 'recent submissions'? On 13 May 2010 12:18, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > strange.... > Any idea? > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Best regards, Igor Stasenko AKA sig.

May 13, 2010

[Pharo-project] apparently recentMessages does not get the latest changes after

by StÃ©phane Ducasse

strange.... Any idea?

May 13, 2010

[Pharo-project] [update 1.1] #11356

by StÃ©phane Ducasse

11356 ----- - Issue 2420: WorldState >> mostUsedToolsOn: should not hardcode StandardToolSet - Issue 2403: Annotation pane is slow because of #sendersCount - Issue 2403: Author ifUnknowAuthorUse:during: readded - SpaceTally can now contemplate also MethodContext Stef

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by StÃ©phane Ducasse

:) But yes if people send code for that it will be the first item for 1.2 :) We want more :) Have source of published pharo version in a large database :) Stef On May 13, 2010, at 10:01 AM, Igor Stasenko wrote: > Basically, i would remove the old cruft in SourceFileArray > and all paranoia about reaching size limit, > and leave only a fresh implementation (ExpandedSourceFileArray). > I don't see why someone would want to revert to old behavior. > > On 13 May 2010 10:56, Igor Stasenko <siguctua(a)gmail.com> wrote: >> On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >>> oops >>> Igor do you have more information? >>> how do we do that? >>> >> just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. >> >> As far as i can tell, everything else should work fine after that. >> This is not my contribution , so i don't know all nuances, sorry. >> >> I just made things which allow source pointers > 32Mb to be stored in >> method trailers, while others put this in use in various places :) >> >>> Stef >>> >>>> I found this message in CompiledMethod, which should be: >>>> >>>> CompiledMethod>>checkOKToAdd: size at: filePosition >>>> "Issue several warnings if the end of the changes file is approaching >>>> a fixed size limit, and finally halt with an error if the limit is reached." >>>> >>>> ^ SourceFiles checkOKToAdd: size at: filePosition >>>> >>>> looks like Pharo didn't integrated this method. >>>> >>>> also, make sure you using a proper source file array.. >>>> >>>> SourceFiles class == ExpandedSourceFileArray >>> >>> >>> >>> >>>> >>>> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>>>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>>>> Hi. I have the following error: >>>>>> >>>>>> 'You have reached the size limit of the changes file. >>>>>> You must take action now to reduce it. >>>>>> Close this error. Do not attempt to proceed.' >>>>>> >>>>>> I know this is a known error, but I thought that with Igor's new method >>>>>> trailer this was fixed. >>>>>> >>>>> >>>>> Seems like a leftovers of old stuff, with precautions once you >>>>> reaching the size limit. >>>>> >>>>> Close this error. And attempt to proceed. >>>>> >>>>> :) >>>>> >>>>>> Tested in 11355 >>>>>> >>>>>> Thanks >>>>>> >>>>>> Mariano >>>>>> >>>>>> _______________________________________________ >>>>>> Pharo-project mailing list >>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Best regards, >>>>> Igor Stasenko AKA sig. >>>>> >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Igor Stasenko AKA sig. >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko AKA sig. >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by StÃ©phane Ducasse

ok I thought that we should change that openSourceFiles self imageName = LastImageName ifFalse: ["Reset the author full name to blank when the image gets moved" LastImageName := self imageName. Author fullName: '']. self checkAndOpenSourcesAndChanges. StandardSourceFileArray install Stef On May 13, 2010, at 9:56 AM, Igor Stasenko wrote: > On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >> oops >> Igor do you have more information? >> how do we do that? >> > just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. > > As far as i can tell, everything else should work fine after that. > This is not my contribution , so i don't know all nuances, sorry. > > I just made things which allow source pointers > 32Mb to be stored in > method trailers, while others put this in use in various places :) > >> Stef >> >>> I found this message in CompiledMethod, which should be: >>> >>> CompiledMethod>>checkOKToAdd: size at: filePosition >>> "Issue several warnings if the end of the changes file is approaching >>> a fixed size limit, and finally halt with an error if the limit is reached." >>> >>> ^ SourceFiles checkOKToAdd: size at: filePosition >>> >>> looks like Pharo didn't integrated this method. >>> >>> also, make sure you using a proper source file array.. >>> >>> SourceFiles class == ExpandedSourceFileArray >> >> >> >> >>> >>> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>>> Hi. I have the following error: >>>>> >>>>> 'You have reached the size limit of the changes file. >>>>> You must take action now to reduce it. >>>>> Close this error. Do not attempt to proceed.' >>>>> >>>>> I know this is a known error, but I thought that with Igor's new method >>>>> trailer this was fixed. >>>>> >>>> >>>> Seems like a leftovers of old stuff, with precautions once you >>>> reaching the size limit. >>>> >>>> Close this error. And attempt to proceed. >>>> >>>> :) >>>> >>>>> Tested in 11355 >>>>> >>>>> Thanks >>>>> >>>>> Mariano >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Igor Stasenko AKA sig. >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by Igor Stasenko

Basically, i would remove the old cruft in SourceFileArray and all paranoia about reaching size limit, and leave only a fresh implementation (ExpandedSourceFileArray). I don't see why someone would want to revert to old behavior. On 13 May 2010 10:56, Igor Stasenko <siguctua(a)gmail.com> wrote: > On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >> oops >> Igor do you have more information? >> how do we do that? >> > just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. > > As far as i can tell, everything else should work fine after that. > This is not my contribution , so i don't know all nuances, sorry. > > I just made things which allow source pointers > 32Mb to be stored in > method trailers, while others put this in use in various places :) > >> Stef >> >>> I found this message in Â CompiledMethod, which should be: >>> >>> CompiledMethod>>checkOKToAdd: size at: filePosition >>> Â Â Â "Issue several warnings if the end of the changes file is approaching >>> Â Â Â a fixed size limit, and finally halt with an error if the limit is reached." >>> >>> Â Â Â ^ SourceFiles checkOKToAdd: size at: filePosition >>> >>> looks like Pharo didn't integrated this method. >>> >>> also, make sure you using a proper Â source file array.. >>> >>> SourceFiles class == ExpandedSourceFileArray >> >> >> >> >>> >>> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>>> Hi. I have the following error: >>>>> >>>>> Â 'You have reached the size limit of the changes file. >>>>> You must take action now to reduce it. >>>>> Close this error. Â Do not attempt to proceed.' >>>>> >>>>> I know this is a known error, but I thought that with Igor's new method >>>>> trailer this was fixed. >>>>> >>>> >>>> Seems like a leftovers of old stuff, with precautions once you >>>> reaching the size limit. >>>> >>>> Close this error. Â And attempt to proceed. >>>> >>>> :) >>>> >>>>> Tested in 11355 >>>>> >>>>> Thanks >>>>> >>>>> Mariano >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Igor Stasenko AKA sig. >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > -- Best regards, Igor Stasenko AKA sig.

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by Igor Stasenko

On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > oops > Igor do you have more information? > how do we do that? > just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. As far as i can tell, everything else should work fine after that. This is not my contribution , so i don't know all nuances, sorry. I just made things which allow source pointers > 32Mb to be stored in method trailers, while others put this in use in various places :) > Stef > >> I found this message in Â CompiledMethod, which should be: >> >> CompiledMethod>>checkOKToAdd: size at: filePosition >> Â Â Â "Issue several warnings if the end of the changes file is approaching >> Â Â Â a fixed size limit, and finally halt with an error if the limit is reached." >> >> Â Â Â ^ SourceFiles checkOKToAdd: size at: filePosition >> >> looks like Pharo didn't integrated this method. >> >> also, make sure you using a proper Â source file array.. >> >> SourceFiles class == ExpandedSourceFileArray > > > > >> >> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>> Hi. I have the following error: >>>> >>>> Â 'You have reached the size limit of the changes file. >>>> You must take action now to reduce it. >>>> Close this error. Â Do not attempt to proceed.' >>>> >>>> I know this is a known error, but I thought that with Igor's new method >>>> trailer this was fixed. >>>> >>> >>> Seems like a leftovers of old stuff, with precautions once you >>> reaching the size limit. >>> >>> Close this error. Â And attempt to proceed. >>> >>> :) >>> >>>> Tested in 11355 >>>> >>>> Thanks >>>> >>>> Mariano >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko AKA sig. >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Best regards, Igor Stasenko AKA sig.

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

On windows I do not know if OSProcess is working. I tested on mac. Stef On May 12, 2010, at 11:54 PM, Andrei Stebakov wrote: > Installation worked well. > Something is still missing (docs for sure!) when I type "OSProcess thisOSProcess" and evaluate/print it it says "a WindowsProcess with pid nil". > > > 2010/5/12 Mariano Martinez Peck <marianopeck(a)gmail.com> > It seems the wiki is outdated. Please try this to install it: > > Gofer new > squeaksource: 'Coral'; > package: 'LoadCoral'; > load. > > (Smalltalk at: #CoralLoader) load. > > > DISCLAIMER: I have no idea of it is working or not. It just load. And I am not even sure if loads completely correct > > Cheers > > mariano > > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Right, I just didn't get it on the first read... > > 2010/5/12 Gabriel Brunstein <gaboto(a)gmail.com> > As I read there, Coral IS A PACKAGE FOR PHARO! so you would not be using another tool. > I don't know which is the state of Coral, if it works or not (based on the previous mail of Stephane) > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Thank you, I'll give it a try. See, maybe my philosophy is wrong, but I'd rather get better at one tool (where it's possible) than learn multiple different tools to do similar tasks. > I think Pharo has a potential to be if not a Swiss army knife like Python, but a very useful language for any programming tasks (scripting is one of them). > So far, as a newbie, I like what I see in Pharo and having a blast learning it. I am so thrilled, that just a thought that it could do scripting sends shivers down my spine :) > > 2010/5/12 Gabriel Brunstein <gaboto(a)gmail.com> > > What about coral? > http://scg.unibe.ch/wiki/projects/bachelorsprojects/coral > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Is it possible to start Pharo headless and execute some command (say to get some info from a web page)? > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

Do not use installer CoralLoader load should work. Stef On May 12, 2010, at 11:10 PM, Andrei Stebakov wrote: > Was trying to install Coral with "ScriptLoader new installer ss project: 'Coral'; install: 'LoadCoral'.df" command. > > Gave me a MessageNotUnderstood along the process: > > MessageNotUnderstood: Installer class>>squeaksource > Installer class(Object)>>doesNotUnderstand: #squeaksource > [] in Installer class>>doesNotUnderstand: #squeaksource > IdentityDictionary(Dictionary)>>at:ifAbsent: > Installer class>>doesNotUnderstand: #squeaksource > Installer class>>ss > UndefinedObject>>DoIt > Compiler>>evaluate:in:to:notifying:ifFail:logged: > [] in TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > BlockClosure>>on:do: > TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > TextMorphForShoutEditor(ParagraphEditor)>>doIt > [] in TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>terminateAndInitializeAround: > TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(TextMorphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(ParagraphEditor)>>keystroke: > TextMorphForShoutEditor(TextMorphEditor)>>keystroke: > [] in [] in TextMorphForShout(TextMorph)>>keyStroke: > TextMorphForShout(TextMorph)>>handleInteraction: > > Installer class(Object)>>doesNotUnderstand: #squeaksource > [] in Installer class>>doesNotUnderstand: #squeaksource > IdentityDictionary(Dictionary)>>at:ifAbsent: > Installer class>>doesNotUnderstand: #squeaksource > Installer class>>ss > UndefinedObject>>DoIt > Compiler>>evaluate:in:to:notifying:ifFail:logged: > [] in TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > BlockClosure>>on:do: > TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > TextMorphForShoutEditor(ParagraphEditor)>>doIt > [] in TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>terminateAndInitializeAround: > TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(TextMorphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(ParagraphEditor)>>keystroke: > TextMorphForShoutEditor(TextMorphEditor)>>keystroke: > [] in [] in TextMorphForShout(TextMorph)>>keyStroke: > TextMorphForShout(TextMorph)>>handleInteraction: > doesNotUnderstand: aMessage > > Oh well, probably some dependencies are missing... > > > 2010/5/12 Gabriel Brunstein <gaboto(a)gmail.com> > What about coral? > http://scg.unibe.ch/wiki/projects/bachelorsprojects/coral > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Is it possible to start Pharo headless and execute some command (say to get some info from a web page)? > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

On May 12, 2010, at 11:08 PM, Gabriel Brunstein wrote: > As I read there, Coral IS A PACKAGE FOR PHARO! so you would not be using another tool. > I don't know which is the state of Coral, if it works or not (based on the previous mail of Stephane) it works but on my machine. So you have to create sh script by end to laucnh pharo on the command line.... But it works. Stef

May 13, 2010