- Pharo-dev - lists.pharo.org

Re: [Pharo-project] Which ConfigurationOfPharo should use in Pharo 1.2 ?

by GermÃ¡n Arduino

Thanks! 2011/2/5 Marcus Denker <marcus.denker(a)inria.fr>: > > On Feb 5, 2011, at 12:16 AM, GermÃ¡n Arduino wrote: > >> Sorry I should have written: "Marcus", sorry. >> > > I attach the complete script used for building 1.2 as the builder.sh stiches it together: > > > > > > >> 2011/2/4 GermÃ¡n Arduino <garduino(a)gmail.com>: >>> Thanks by the explanations Dale. >>> >>> Thanks Guillermo and Markus by the points. >>> >>> Until moment any way of installation I tried failed with different >>> sort of messages. >>> >>> By now I downloaded the ready image pointed by Markus but would like >>> to build my own. >>> >>> Thanks! >>> >>> >>> 2011/2/4 Dale Henrichs <dhenrich(a)vmware.com>: >>>> Sure: >>>> >>>> Â http://gemstonesoup.wordpress.com/2011/01/17/metacello-1-0-beta-28-unearthe… >>>> >>>> Be sure to look at the section of development cycle ... and tools support, too... >>>> >>>> Dale >>>> >>>> On Feb 4, 2011, at 6:37 AM, Guillermo Polito wrote: >>>> >>>> Dale, Is there a place where I can read how to configure the symbolic versions? >>>> >>>> Thx! >>>> Guille :) >>>> >>>> On Fri, Feb 4, 2011 at 11:29 AM, Dale Henrichs <dhenrich(a)vmware.com<mailto:dhenrich@vmware.com>> wrote: >>>> ConfigurationOfPharo should have a #stable symbolic version defined that specifies the version that should be used in 1.2, 1.1, and 1.0 ... then one just loads the #stable version: >>>> >>>> Â (ConfigurationOfPharo project version: #stable) load >>>> >>>> and you'll get the right version loaded for the platform version ... even though the version is under development I think it is valid to specify a #stable symbolic version for Pharo1.2, just so folks don't have to ask this question over and over again ... Don't let the name 'stable' scare you ... >>>> >>>> The intent is that the #stable symbolic version specifies the version that should be loaded .... the developer decides which versions are #stable for each platform version and when a new version becomes "the version to use" the developer updates the specification. >>>> >>>> The users of a configuration shouldn't have to think ... remember in the past the recommended pattern was: >>>> >>>> Â ConfigurationOfPharo project latestVersion load >>>> >>>> and that worked fine until Pharo1.1 and Pharo1.2 were introduced. The expression: >>>> >>>> Â (ConfigurationOfPharo project version: #stable) load >>>> >>>> is intended to replace the use of #latestVersion because it makes it possible to explicitly specify the "latest version" on a platform by platform and platform version basis... >>>> >>>> Sorry if I appear to be ranting ... I'm just trying to get the message out:) >>>> >>>> Dale >>>> >>>> On Feb 4, 2011, at 6:01 AM, Guillermo Polito wrote: >>>> >>>> I'm Using '1.2-beta2'. >>>> >>>> Should we remove invalid and unused versions? Â I'll add a few comments at lunch time ;) >>>> >>>> On Fri, Feb 4, 2011 at 10:53 AM, GermÃ¡n Arduino <garduino(a)gmail.com<mailto:garduino@gmail.com><mailto:garduino@gmail.com<mailto:garduino@gmail.com>>> wrote: >>>> I tried the 2 latest Beta and fail, also the 1.1 version fail. >>>> >>>> Which ConfigurationOfPharo I should use with Pharo 1.2 ? >>>> >>>> Cheers. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> -- >>> ================================================= >>> GermÃ¡n S. Arduino Â <gsa @ arsol.net> Â Twitter: garduino >>> Arduino Software & Web Hosting Â http://www.arduinosoftware.com >>> PasswordsPro Â http://www.passwordspro.com >>> ================================================= >>> >> > > -- > Marcus Denker Â -- http://www.marcusdenker.de > INRIA Lille -- Nord Europe. Team RMoD. > > > -- ================================================= GermÃ¡n S. ArduinoÂ <gsa @ arsol.net>Â Â Twitter: garduino Arduino Software & Web HostingÂ Â http://www.arduinosoftware.com PasswordsProÂ http://www.passwordspro.com =================================================

Feb. 5, 2011

Re: [Pharo-project] Smalltalk for engineers

by Geert Claes

Peter Hugosson-Miller wrote: > > Bearded +1 > Bearded +1 :) -- View this message in context: http://forum.world.st/Smalltalk-for-engineers-tp3261551p3261768.html Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

Feb. 5, 2011

[Pharo-project] different vmFullPath between MacVM

by Luc Fabresse

Hi All, SmalltalkImage current vmFullPath evaluates to: '/Applications/SmalltalkVMs' with the MacVM 5.7.4 (the directory that contains the .app vm application) '/Applications/SmalltalkVMs/Squeak-4.2.5beta1U.app/Contents/MacOS/Squeak VM Opt' with the MacVM 4.2.5b1 (the exec file) Is this difference known? I found nothing on the mailing lists. Is it a bug? it is to know we should adapt Coral or not. Cheers, #Luc

Feb. 5, 2011

Re: [Pharo-project] Smalltalk for engineers

by Norbert Hartl

On 05.02.2011, at 13:02, Geoffroy Couprie wrote: > Well, we could make a poll to see who is bearded here... http://www.pharo-project.org/community/contributors See yourself. The tricky thing about smalltalk and beards is that it does not mean to have a beard _on_ your face but to have it _behind_ your face and that cannot be seen in normal day light. :) Norbert

Feb. 5, 2011

Re: [Pharo-project] Smalltalk for engineers

by Peter Hugosson-Miller

Bearded +1 -- Cheers, Peter. On 5 feb 2011, at 13:02, Geoffroy Couprie <geo.couprie(a)gmail.com> wrote: > Hello, > > Thanks for advertising my post :) > > On Sat, Feb 5, 2011 at 8:10 AM, Geert Claes <geert.wl.claes(a)gmail.com> wrote: >> >> James Robertson spotted this post: >> >> http://unhandledexpression.com/2011/02/04/smalltalk-for-engineers/ >> >> I was especially interested in the statement "you donât understand what you >> can/should do ..." > > Well, we could make a poll to see who is bearded here... > > Working with Smalltalk and Pharo has been a fun journey, and I'm still > enjoying the ride. > > I especially thank Steph for introducing me to this wonderful platform! >

Feb. 5, 2011

Re: [Pharo-project] Smalltalk for engineers

by Geoffroy Couprie

Hello, Thanks for advertising my post :) On Sat, Feb 5, 2011 at 8:10 AM, Geert Claes <geert.wl.claes(a)gmail.com> wrote: > > James Robertson spotted this post: > > http://unhandledexpression.com/2011/02/04/smalltalk-for-engineers/ > > I was especially interested in the statement "you donât understand what you > can/should do ..." Well, we could make a poll to see who is bearded here... Working with Smalltalk and Pharo has been a fun journey, and I'm still enjoying the ride. I especially thank Steph for introducing me to this wonderful platform!

Feb. 5, 2011

Re: [Pharo-project] Smalltalk for engineers

by John McIntosh

Casual mention of iPhone port, always helpfull On 2/4/11, Geert Claes <geert.wl.claes(a)gmail.com> wrote: > > James Robertson spotted this post: > > http://unhandledexpression.com/2011/02/04/smalltalk-for-engineers/ > > I was especially interested in the statement "you donât understand what you > can/should do ..." > -- > View this message in context: > http://forum.world.st/Smalltalk-for-engineers-tp3261551p3261551.html > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > -- =========================================================================== John M. McIntosh <johnmci(a)smalltalkconsulting.com> Corporate Smalltalk Consulting Ltd. http://www.smalltalkconsulting.com ===========================================================================

Feb. 5, 2011

Re: [Pharo-project] [ANN] Alien on Pharo 1.2

by Luc Fabresse

Hi Serge, I guess that you use an old version of 1.1.1. It requires the updated version of SmalltalkImage>>recreateSpecialObjectsArray (array size of 55). For older version (array size of 50 such as Pharo 1.0 or Squeak 4.1 also I guess) you should load Alien-Core-LucFabresse.66 and not the latest core Alien-Core-IgorStasenko.68. Steps for a running Alien in 1.1.1 (resp 1.2) with MacVM 4.2.5b1: 1) download a fresh 1.1.1 (Latest update: #11418) 2) Load: ConfigurationOfAlien-LucFabresse.34 3) (ConfigurationOfAlien project version: 'Pharo 1.1') load: {'All'. 'MacOSX'} 4) 40 run, 40 passes, 0 expected failures, 0 failures, 0 errors, 0 unexpected passes be happy ;-) #Luc 2011/2/5 Serge Stinckwich <serge.stinckwich(a)gmail.com> > On Sun, Jan 30, 2011 at 7:05 PM, Luc Fabresse <luc.fabresse(a)gmail.com> > wrote: > > Hi all, > > I just committed new versions of Alien on squeaksource to make it run on > 1.2 > > I also modified the ConfigurationOfAlien to easily load it: > > (ConfigurationOfAlien project version: 'Pharo 1.1') load > > I try to load Alien in a new Pharo 1.1.1 one click image on my MBP and > i've got the following message: > > "This version of ALIEN assumes a size of 55 in the array of special > objects, if loaded would cause the image to crash!. Please contact the > Alien package developers" > > -- > Serge Stinckwich > UMI UMMISCO 209 (IRD/UPMC), Hanoi, Vietnam > Every DSL ends up being Smalltalk > http://doesnotunderstand.org/ > >

Feb. 5, 2011

Re: [Pharo-project] [ANN] Alien on Pharo 1.2

by Serge Stinckwich

On Sun, Jan 30, 2011 at 7:05 PM, Luc Fabresse <luc.fabresse(a)gmail.com> wrote: > Hi all, > I just committed new versions of Alien on squeaksource to make it run on 1.2 > I also modified the ConfigurationOfAlien to easily load it: > (ConfigurationOfAlien project version: 'Pharo 1.1') load I try to load Alien in a new Pharo 1.1.1 one click image on my MBP and i've got the following message: "This version of ALIEN assumes a size of 55 in the array of special objects, if loaded would cause the image to crash!. Please contact the Alien package developers" -- Serge Stinckwich UMI UMMISCO 209 (IRD/UPMC), Hanoi, Vietnam Every DSL ends up being Smalltalk http://doesnotunderstand.org/

Feb. 5, 2011

[Pharo-project] "Error: No content to install" starting Pharo 1.2 on Windows - bug or feature?

by Joachim Geidel

I ran into an error when starting a Pharo 1.2RC2 (build 119) image on Windows XP. What I did was: - on Mac OS X, create a new directory "Pharo-1.2-build119" - copy the image, changes file, and sources file from the one-click app to this directory - started the image, saved it as "jniport20.image", and worked a bit with it - started Windows XP under Parallels, opened an explorer on Pharo-1.2-build119 - placed a link to squeak.exe in the directory which points to Y:\Entwicklung\Pharo\PharoOneClick1.2.app\Contents\Windows\Squeak.exe and has Y:\Entwicklung\Pharo\Pharo-1.2-build119 as the working directory - dropped jniport20.image on the link. The image starts okay, but immediately opens an error notifier with an "Error: No content to install" in CodeLoader>>installSourceFile:. The CodeLoader's sourceFiles instvar hold an Array(a HTTPDownloadRequest), where the HTTPDownloadRequest has 'Y:\Entwicklung\Pharo\Pharo-1.2-build119\PharoOneClick1.2.image' as its URL. I have seen issue 3595 "problem starting up with a script on windows" which has been closed, apparently because it was not considered a bug. However, that seems to be something different involving startup scripts. What am I doing wrong? Or is it a bug? Regards, Joachim Geidel -- View this message in context: http://forum.world.st/Error-No-content-to-install-starting-Pharo-1-2-on-Win… Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

Feb. 5, 2011