February 2015 - Pharo-dev - lists.pharo.org

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by stepharo

Le 9/2/15 19:07, Dale Henrichs a Ã©crit : > Thanks Norbert, > > Is there a way that you can update the zero-conf script > (http://get.pharo.org/travis) with the proper incantation? > > I really would rather not have to reinvent the zero conf system for > pharo, unless the whole zero conf system is being deprecated ... I > haven't googled that yet ... Why would it be deprecated? It is useful and we it all the time. > > Something changed in the last 5 days and I don't imagine that it is a > missing `sudo dpkg --add-architecture i386` that changed ... unless > someone removed that line from the zero conf script ... > > Dale > > On 02/09/2015 10:01 AM, Norbert Hartl wrote: >> Dale, >> >> in newer linux systems i386 packages are not included by default. You >> need to add the architecture. All steps you can see on >> http://pharo.org/download >> >> |sudo add-apt-repository ppa:pharo/stable >> sudo dpkg --add-architecture i386 >> sudo apt-get update >> sudo apt-get install pharo-vm-core| >> >> Hope that helps, >> >> Norbert >> >> >>> Am 09.02.2015 um 18:57 schrieb Dale Henrichs >>> <dale.henrichs(a)gemtalksystems.com >>> <mailto:dale.henrichs@gemtalksystems.com>>: >>> >>> I see that https://launchpad.net/~pharo/+archive/ubuntu/stable >>> exists and it looks like pharo-vm-core:i386 is there,and the >>> packages were built 5 days ago (the date of my last good run) but >>> when I follow this link >>> >>> http://pharo.org/pharo-download/ubuntu >>> >>> on the https://launchpad.net/~pharo/+archive/ubuntu/stable site >>> under "PPA description" I get: >>> >>> Not Found /web/pharo-download/ubuntu >>> >>> Which looks suspiciously like a Seaside not found message .... of >>> course I don't know whether http://pharo.org/pharo-download/ubuntu >>> needs to work as I haven't figured out where `ppa:pharo/stable` is >>> actually defined: >>> >>> sudo add-apt-repository ppa:pharo/stable >>> >>> >>> Dale >>> >>> On 02/09/2015 09:44 AM, Dale Henrichs wrote: >>>> Can I get some pointers as to where the mystical pharo-vm-core:i386 >>>> is so that I can build (and maintain) my own pharo install scripts? >>>> >>>> Any help appreciated.... >>>> >>>> Dale >>>> >>>> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>>>> It looks like the following script started failing within the last >>>>> 5 days sometime: >>>>> >>>>> wget --quiet -O - get.pharo.org/travis+vm >>>>> <http://get.pharo.org/travis+vm> | bash >>>>> >>>>> getting this error (on ubunutu12.04): >>>>> >>>>> Fetched 18.5 kB in 4s (4,028 B/s) >>>>> Reading package lists... Done >>>>> Reading package lists... Done >>>>> Building dependency tree >>>>> Reading state information... Done >>>>> Package pharo-vm-core:i386 is not available, but is referred to by >>>>> another package. >>>>> This may mean that the package is missing, has been obsoleted, or >>>>> is only available from another source >>>>> >>>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>>> >>>>> >>>>> 5 days ago this is what the same log section looked like[1]: >>>>> >>>>> Fetched 15.6 kB in 1s (9,597 B/s) >>>>> Reading package lists... Done >>>>> Reading package lists... Done >>>>> Building dependency tree >>>>> Reading state information... Done >>>>> The following package was automatically installed and is no longer >>>>> required: >>>>> libgeos-3.2.2 >>>>> Use 'apt-get autoremove' to remove them. >>>>> Suggested packages: >>>>> pharo-vm-desktop:i386 >>>>> The following NEW packages will be installed: >>>>> pharo-vm-core:i386 >>>>> 0 upgraded, 1 newly installed, 0 to remove and 174 not upgraded. >>>>> Need to get 14.5 MB of archives. >>>>> >>>>> Then 2 days ago, the above error started happening[2]: >>>>> >>>>> Fetched 18.5 kB in 4s (4,214 B/s) >>>>> Reading package lists... Done >>>>> Reading package lists... Done >>>>> Building dependency tree >>>>> Reading state information... Done >>>>> Package pharo-vm-core:i386 is not available, but is referred to by >>>>> another package. >>>>> This may mean that the package is missing, has been obsoleted, or >>>>> is only available from another source >>>>> >>>>> >>>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>>> >>>>> Presumably something change in the last week to break >>>>> things....pretty much depend upon this working to do much of my >>>>> testing on travis-ci:( >>>>> >>>>> Dale >>>>> >>>>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 >>>>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 >>>> >>> >> >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Dale Henrichs

On 02/09/2015 10:40 AM, Nicolai Hess wrote: > 2015-02-09 19:32 GMT+01:00 Dale Henrichs > <dale.henrichs(a)gemtalksystems.com > <mailto:dale.henrichs@gemtalksystems.com>>: > > Norbert, > > The travis script explicitly downloads the pharo-vm-core:i386 > package and fails then downloads the vm ... so I'm not sure why > the pharo-vm-core:i386 is needed separately ... > > > the i386 package is needed on 64 bit linux, it defines the > dependencies to the 32bit libraries for the x11 display plugin, sound > plugin ... . > if you just download the vm (get.pharo.org/vm > <http://get.pharo.org/vm>) you'll get a 32bit vm too (and pharos > plugins), but it may not start if the other 32 bit libraries are missing. > (I think, even starting the pharovm headless does not work with out > the 32 bit libraries). > Nicolai, Thank you very much! ... This helps a lot! ... My builderCI[1] scripts explicitly installed the "required" 32 bit libs needed for Pharo and Squeak, and when I converted to zero conf, I used the travis+vm script because I am running the tests on travis (being otherwise ignorant of the purpose of the travis script), but I did not remove the 32 bit lib install step, soooo I just might be able to get away without the travis script ... If I am missing additional libraries I can add them to the "explicit install list" ... BTW, when I look at the install log files, no libraries are installed after the pharo-vm-core:i386 library, so I'm guessing that that means that the necessary libs were already there? I've got my fingers crossed:) Dale [1] https://github.com/dalehenrich/builderCI

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Nicolai Hess

2015-02-09 19:32 GMT+01:00 Dale Henrichs <dale.henrichs(a)gemtalksystems.com>: > Norbert, > > The travis script explicitly downloads the pharo-vm-core:i386 package and > fails then downloads the vm ... so I'm not sure why the pharo-vm-core:i386 > is needed separately ... > the i386 package is needed on 64 bit linux, it defines the dependencies to the 32bit libraries for the x11 display plugin, sound plugin ... . if you just download the vm (get.pharo.org/vm) you'll get a 32bit vm too (and pharos plugins), but it may not start if the other 32 bit libraries are missing. (I think, even starting the pharovm headless does not work with out the 32 bit libraries). > > I guess I'll just thrash around a bit and find out for myself ... I'm not > getting anything else done anyway:( > > Dale > > > On 02/09/2015 10:26 AM, Norbert Hartl wrote: > > > Am 09.02.2015 um 19:19 schrieb Dale Henrichs < > dale.henrichs(a)gemtalksystems.com>: > > Norbert, > > I am also curious as to the purpose of the pharo-vm-core:i386 package ... > why do I need it for travis and not any other Ubuntu install (apparently) > ... can I just skip the whole travis zero conf script? > > As I said I don't know the zeroconf travis stuff. But the pharo-vm-core > is just the vm. If you use zeroconf it might be easier to just pull the vm > along with the other files. A commandline of > > $ curl get.pharo.org/30+vm | bash > > will pull image and vm and you can gain nothing by installing the > debian/ubuntu package. The pharo-vm-core is just a package to install the > vm system wide. > > Norbert > > I would like to get on with my work, but several projects are stalled > because my travis builds are failing... > > I've already invested several days into converting my system to use zero > conf scripts (several months ago) and I'm not relishing the prospect of > redoing all of that work ... > > The http://get.pharo.org/travis script fails on Ubuntu12.04 and it > worked just fine 5 days ago (6 days now:)... > > Is anyone maintaining the zero conf system these days? > > Dale > On 02/09/2015 10:01 AM, Norbert Hartl wrote: > > Dale, > > in newer linux systems i386 packages are not included by default. You > need to add the architecture. All steps you can see on > http://pharo.org/download > > sudo add-apt-repository ppa:pharo/stable > sudo dpkg --add-architecture i386 > sudo apt-get update > sudo apt-get install pharo-vm-core > > > Hope that helps, > > Norbert > > > > Am 09.02.2015 um 18:57 schrieb Dale Henrichs < > dale.henrichs(a)gemtalksystems.com>: > > I see that https://launchpad.net/~pharo/+archive/ubuntu/stable > <https://launchpad.net/%7Epharo/+archive/ubuntu/stable> exists and it > looks like pharo-vm-core:i386 is there,and the packages were built 5 days > ago (the date of my last good run) but when I follow this link > > http://pharo.org/pharo-download/ubuntu > > on the https://launchpad.net/~pharo/+archive/ubuntu/stable > <https://launchpad.net/%7Epharo/+archive/ubuntu/stable> site under "PPA > description" I get: > > Not Found /web/pharo-download/ubuntu > > Which looks suspiciously like a Seaside not found message .... of course I > don't know whether http://pharo.org/pharo-download/ubuntu needs to work > as I haven't figured out where `ppa:pharo/stable` is actually defined: > > sudo add-apt-repository ppa:pharo/stable > > > Dale > > On 02/09/2015 09:44 AM, Dale Henrichs wrote: > > Can I get some pointers as to where the mystical pharo-vm-core:i386 is so > that I can build (and maintain) my own pharo install scripts? > > Any help appreciated.... > > Dale > > On 02/08/2015 06:54 PM, Dale Henrichs wrote: > > It looks like the following script started failing within the last 5 days > sometime: > > wget --quiet -O - get.pharo.org/travis+vm | bash > > getting this error (on ubunutu12.04): > > Fetched 18.5 kB in 4s (4,028 B/s) > Reading package lists... Done > Reading package lists... Done > Building dependency tree > Reading state information... Done > Package pharo-vm-core:i386 is not available, but is referred to by another > package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > > E: Package 'pharo-vm-core:i386' has no installation candidate > > > 5 days ago this is what the same log section looked like[1]: > > Fetched 15.6 kB in 1s (9,597 B/s) > Reading package lists... Done > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following package was automatically installed and is no longer > required: > libgeos-3.2.2 > Use 'apt-get autoremove' to remove them. > Suggested packages: > pharo-vm-desktop:i386 > The following NEW packages will be installed: > pharo-vm-core:i386 > 0 upgraded, 1 newly installed, 0 to remove and 174 not upgraded. > Need to get 14.5 MB of archives. > > Then 2 days ago, the above error started happening[2]: > > Fetched 18.5 kB in 4s (4,214 B/s) > Reading package lists... Done > Reading package lists... Done > Building dependency tree > Reading state information... Done > Package pharo-vm-core:i386 is not available, but is referred to by another > package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > > E: Package 'pharo-vm-core:i386' has no installation candidate > > Presumably something change in the last week to break things....pretty > much depend upon this working to do much of my testing on travis-ci:( > > Dale > > [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 > [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 > > > > > > > >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Dale Henrichs

Norbert, The travis script explicitly downloads the pharo-vm-core:i386 package and fails then downloads the vm ... so I'm not sure why the pharo-vm-core:i386 is needed separately ... I guess I'll just thrash around a bit and find out for myself ... I'm not getting anything else done anyway:( Dale On 02/09/2015 10:26 AM, Norbert Hartl wrote: > >> Am 09.02.2015 um 19:19 schrieb Dale Henrichs >> <dale.henrichs(a)gemtalksystems.com >> <mailto:dale.henrichs@gemtalksystems.com>>: >> >> Norbert, >> >> I am also curious as to the purpose of the pharo-vm-core:i386 package >> ... why do I need it for travis and not any other Ubuntu install >> (apparently) ... can I just skip the whole travis zero conf script? >> > As I said I don't know the zeroconf travis stuff. But the > pharo-vm-core is just the vm. If you use zeroconf it might be easier > to just pull the vm along with the other files. A commandline of > > $ curl get.pharo.org/30+vm <http://get.pharo.org/30+vm> | bash > > will pull image and vm and you can gain nothing by installing the > debian/ubuntu package. The pharo-vm-core is just a package to install > the vm system wide. > > Norbert > >> I would like to get on with my work, but several projects are stalled >> because my travis builds are failing... >> >> I've already invested several days into converting my system to use >> zero conf scripts (several months ago) and I'm not relishing the >> prospect of redoing all of that work ... >> >> The http://get.pharo.org/travis script fails on Ubuntu12.04 and it >> worked just fine 5 days ago (6 days now:)... >> >> Is anyone maintaining the zero conf system these days? >> >> Dale >> On 02/09/2015 10:01 AM, Norbert Hartl wrote: >>> Dale, >>> >>> in newer linux systems i386 packages are not included by default. >>> You need to add the architecture. All steps you can see on >>> http://pharo.org/download >>> >>> |sudo add-apt-repository ppa:pharo/stable >>> sudo dpkg --add-architecture i386 >>> sudo apt-get update >>> sudo apt-get install pharo-vm-core| >>> >>> Hope that helps, >>> >>> Norbert >>> >>> >>>> Am 09.02.2015 um 18:57 schrieb Dale Henrichs >>>> <dale.henrichs(a)gemtalksystems.com >>>> <mailto:dale.henrichs@gemtalksystems.com>>: >>>> >>>> I see that https://launchpad.net/~pharo/+archive/ubuntu/stable >>>> exists and it looks like pharo-vm-core:i386 is there,and the >>>> packages were built 5 days ago (the date of my last good run) but >>>> when I follow this link >>>> >>>> http://pharo.org/pharo-download/ubuntu >>>> >>>> on the https://launchpad.net/~pharo/+archive/ubuntu/stable site >>>> under "PPA description" I get: >>>> >>>> Not Found /web/pharo-download/ubuntu >>>> >>>> Which looks suspiciously like a Seaside not found message .... of >>>> course I don't know whether http://pharo.org/pharo-download/ubuntu >>>> needs to work as I haven't figured out where `ppa:pharo/stable` is >>>> actually defined: >>>> >>>> sudo add-apt-repository ppa:pharo/stable >>>> >>>> >>>> Dale >>>> >>>> On 02/09/2015 09:44 AM, Dale Henrichs wrote: >>>>> Can I get some pointers as to where the mystical >>>>> pharo-vm-core:i386 is so that I can build (and maintain) my own >>>>> pharo install scripts? >>>>> >>>>> Any help appreciated.... >>>>> >>>>> Dale >>>>> >>>>> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>>>>> It looks like the following script started failing within the >>>>>> last 5 days sometime: >>>>>> >>>>>> wget --quiet -O - get.pharo.org/travis+vm >>>>>> <http://get.pharo.org/travis+vm> | bash >>>>>> >>>>>> getting this error (on ubunutu12.04): >>>>>> >>>>>> Fetched 18.5 kB in 4s (4,028 B/s) >>>>>> Reading package lists... Done >>>>>> Reading package lists... Done >>>>>> Building dependency tree >>>>>> Reading state information... Done >>>>>> Package pharo-vm-core:i386 is not available, but is referred to >>>>>> by another package. >>>>>> This may mean that the package is missing, has been obsoleted, or >>>>>> is only available from another source >>>>>> >>>>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>>>> >>>>>> >>>>>> 5 days ago this is what the same log section looked like[1]: >>>>>> >>>>>> Fetched 15.6 kB in 1s (9,597 B/s) >>>>>> Reading package lists... Done >>>>>> Reading package lists... Done >>>>>> Building dependency tree >>>>>> Reading state information... Done >>>>>> The following package was automatically installed and is no >>>>>> longer required: >>>>>> libgeos-3.2.2 >>>>>> Use 'apt-get autoremove' to remove them. >>>>>> Suggested packages: >>>>>> pharo-vm-desktop:i386 >>>>>> The following NEW packages will be installed: >>>>>> pharo-vm-core:i386 >>>>>> 0 upgraded, 1 newly installed, 0 to remove and 174 not upgraded. >>>>>> Need to get 14.5 MB of archives. >>>>>> >>>>>> Then 2 days ago, the above error started happening[2]: >>>>>> >>>>>> Fetched 18.5 kB in 4s (4,214 B/s) >>>>>> Reading package lists... Done >>>>>> Reading package lists... Done >>>>>> Building dependency tree >>>>>> Reading state information... Done >>>>>> Package pharo-vm-core:i386 is not available, but is referred to >>>>>> by another package. >>>>>> This may mean that the package is missing, has been obsoleted, or >>>>>> is only available from another source >>>>>> >>>>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>>>> >>>>>> Presumably something change in the last week to break >>>>>> things....pretty much depend upon this working to do much of my >>>>>> testing on travis-ci:( >>>>>> >>>>>> Dale >>>>>> >>>>>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 >>>>>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 >>>>> >>>> >>> >> >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Norbert Hartl

> Am 09.02.2015 um 19:19 schrieb Dale Henrichs <dale.henrichs(a)gemtalksystems.com>: > > Norbert, > > I am also curious as to the purpose of the pharo-vm-core:i386 package ... why do I need it for travis and not any other Ubuntu install (apparently) ... can I just skip the whole travis zero conf script? > As I said I don't know the zeroconf travis stuff. But the pharo-vm-core is just the vm. If you use zeroconf it might be easier to just pull the vm along with the other files. A commandline of $ curl get.pharo.org/30+vm <http://get.pharo.org/30+vm> | bash will pull image and vm and you can gain nothing by installing the debian/ubuntu package. The pharo-vm-core is just a package to install the vm system wide. Norbert > I would like to get on with my work, but several projects are stalled because my travis builds are failing... > > I've already invested several days into converting my system to use zero conf scripts (several months ago) and I'm not relishing the prospect of redoing all of that work ... > > The http://get.pharo.org/travis <http://get.pharo.org/travis> script fails on Ubuntu12.04 and it worked just fine 5 days ago (6 days now:)... > > Is anyone maintaining the zero conf system these days? > > Dale > On 02/09/2015 10:01 AM, Norbert Hartl wrote: >> Dale, >> >> in newer linux systems i386 packages are not included by default. You need to add the architecture. All steps you can see on http://pharo.org/download <http://pharo.org/download> >> >> sudo add-apt-repository ppa:pharo/stable >> sudo dpkg --add-architecture i386 >> sudo apt-get update >> sudo apt-get install pharo-vm-core >> >> Hope that helps, >> >> Norbert >> >> >>> Am 09.02.2015 um 18:57 schrieb Dale Henrichs <dale.henrichs(a)gemtalksystems.com <mailto:dale.henrichs@gemtalksystems.com>>: >>> >>> I see that https://launchpad.net/~pharo/+archive/ubuntu/stable <https://launchpad.net/%7Epharo/+archive/ubuntu/stable> exists and it looks like pharo-vm-core:i386 is there,and the packages were built 5 days ago (the date of my last good run) but when I follow this link >>> >>> http://pharo.org/pharo-download/ubuntu <http://pharo.org/pharo-download/ubuntu> >>> >>> on the https://launchpad.net/~pharo/+archive/ubuntu/stable <https://launchpad.net/%7Epharo/+archive/ubuntu/stable> site under "PPA description" I get: >>> >>> Not Found /web/pharo-download/ubuntu >>> >>> Which looks suspiciously like a Seaside not found message .... of course I don't know whether http://pharo.org/pharo-download/ubuntu <http://pharo.org/pharo-download/ubuntu>needs to work as I haven't figured out where `ppa:pharo/stable` is actually defined: >>> >>> sudo add-apt-repository ppa:pharo/stable >>> >>> >>> Dale >>> >>> On 02/09/2015 09:44 AM, Dale Henrichs wrote: >>>> Can I get some pointers as to where the mystical pharo-vm-core:i386 is so that I can build (and maintain) my own pharo install scripts? >>>> >>>> Any help appreciated.... >>>> >>>> Dale >>>> >>>> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>>>> It looks like the following script started failing within the last 5 days sometime: >>>>> >>>>> wget --quiet -O - get.pharo.org/travis+vm <http://get.pharo.org/travis+vm> | bash >>>>> >>>>> getting this error (on ubunutu12.04): >>>>> >>>>> Fetched 18.5 kB in 4s (4,028 B/s) >>>>> Reading package lists... Done >>>>> Reading package lists... Done >>>>> Building dependency tree >>>>> Reading state information... Done >>>>> Package pharo-vm-core:i386 is not available, but is referred to by another package. >>>>> This may mean that the package is missing, has been obsoleted, or >>>>> is only available from another source >>>>> >>>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>>> >>>>> >>>>> 5 days ago this is what the same log section looked like[1]: >>>>> >>>>> Fetched 15.6 kB in 1s (9,597 B/s) >>>>> Reading >>>>> package lists... Done >>>>> Reading >>>>> package lists... Done >>>>> Building >>>>> dependency tree >>>>> Reading >>>>> state information... Done >>>>> The following package was automatically >>>>> installed and is no longer required: >>>>> libgeos-3.2.2 >>>>> Use 'apt-get autoremove' to remove >>>>> them. >>>>> Suggested packages: >>>>> pharo-vm-desktop:i386 >>>>> The following NEW packages will be >>>>> installed: >>>>> pharo-vm-core:i386 >>>>> 0 upgraded, 1 newly installed, 0 to >>>>> remove and 174 not upgraded. >>>>> Need to get 14.5 MB of archives. >>>>> >>>>> >>>>> >>>>> Then 2 days ago, the above error started happening[2]: >>>>> >>>>> Fetched 18.5 kB in 4s (4,214 B/s) >>>>> Reading >>>>> package lists... Done >>>>> Reading >>>>> package lists... Done >>>>> Building >>>>> dependency tree >>>>> Reading >>>>> state information... Done >>>>> Package pharo-vm-core:i386 is not >>>>> available, but is referred to by another >>>>> package. >>>>> This may mean that the package is >>>>> missing, has been obsoleted, or >>>>> is only available from another source >>>>> >>>>> >>>>> >>>>> E: Package 'pharo-vm-core:i386' has no >>>>> installation candidate >>>>> >>>>> Presumably something change in the last week to break things....pretty much depend upon this working to do much of my testing on travis-ci:( >>>>> >>>>> Dale >>>>> >>>>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 <https://travis-ci.org/dalehenrich/tode/jobs/49400710> >>>>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 <https://travis-ci.org/dalehenrich/tode/jobs/49776435> >>>> >>> >> >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Dale Henrichs

Norbert, I am also curious as to the purpose of the pharo-vm-core:i386 package ... why do I need it for travis and not any other Ubuntu install (apparently) ... can I just skip the whole travis zero conf script? I would like to get on with my work, but several projects are stalled because my travis builds are failing... I've already invested several days into converting my system to use zero conf scripts (several months ago) and I'm not relishing the prospect of redoing all of that work ... The http://get.pharo.org/travis script fails on Ubuntu12.04 and it worked just fine 5 days ago (6 days now:)... Is anyone maintaining the zero conf system these days? Dale On 02/09/2015 10:01 AM, Norbert Hartl wrote: > Dale, > > in newer linux systems i386 packages are not included by default. You > need to add the architecture. All steps you can see on > http://pharo.org/download > > |sudo add-apt-repository ppa:pharo/stable > sudo dpkg --add-architecture i386 > sudo apt-get update > sudo apt-get install pharo-vm-core| > > Hope that helps, > > Norbert > > >> Am 09.02.2015 um 18:57 schrieb Dale Henrichs >> <dale.henrichs(a)gemtalksystems.com >> <mailto:dale.henrichs@gemtalksystems.com>>: >> >> I see that https://launchpad.net/~pharo/+archive/ubuntu/stable exists >> and it looks like pharo-vm-core:i386 is there,and the packages were >> built 5 days ago (the date of my last good run) but when I follow >> this link >> >> http://pharo.org/pharo-download/ubuntu >> >> on the https://launchpad.net/~pharo/+archive/ubuntu/stable site under >> "PPA description" I get: >> >> Not Found /web/pharo-download/ubuntu >> >> Which looks suspiciously like a Seaside not found message .... of >> course I don't know whether http://pharo.org/pharo-download/ubuntu >> needs to work as I haven't figured out where `ppa:pharo/stable` is >> actually defined: >> >> sudo add-apt-repository ppa:pharo/stable >> >> >> Dale >> >> On 02/09/2015 09:44 AM, Dale Henrichs wrote: >>> Can I get some pointers as to where the mystical pharo-vm-core:i386 >>> is so that I can build (and maintain) my own pharo install scripts? >>> >>> Any help appreciated.... >>> >>> Dale >>> >>> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>>> It looks like the following script started failing within the last >>>> 5 days sometime: >>>> >>>> wget --quiet -O - get.pharo.org/travis+vm >>>> <http://get.pharo.org/travis+vm> | bash >>>> >>>> getting this error (on ubunutu12.04): >>>> >>>> Fetched 18.5 kB in 4s (4,028 B/s) >>>> Reading package lists... Done >>>> Reading package lists... Done >>>> Building dependency tree >>>> Reading state information... Done >>>> Package pharo-vm-core:i386 is not available, but is referred to by >>>> another package. >>>> This may mean that the package is missing, has been obsoleted, or >>>> is only available from another source >>>> >>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>> >>>> >>>> 5 days ago this is what the same log section looked like[1]: >>>> >>>> Fetched 15.6 kB in 1s (9,597 B/s) >>>> Reading package lists... Done >>>> Reading package lists... Done >>>> Building dependency tree >>>> Reading state information... Done >>>> The following package was automatically installed and is no longer >>>> required: >>>> libgeos-3.2.2 >>>> Use 'apt-get autoremove' to remove them. >>>> Suggested packages: >>>> pharo-vm-desktop:i386 >>>> The following NEW packages will be installed: >>>> pharo-vm-core:i386 >>>> 0 upgraded, 1 newly installed, 0 to remove and 174 not upgraded. >>>> Need to get 14.5 MB of archives. >>>> >>>> Then 2 days ago, the above error started happening[2]: >>>> >>>> Fetched 18.5 kB in 4s (4,214 B/s) >>>> Reading package lists... Done >>>> Reading package lists... Done >>>> Building dependency tree >>>> Reading state information... Done >>>> Package pharo-vm-core:i386 is not available, but is referred to by >>>> another package. >>>> This may mean that the package is missing, has been obsoleted, or >>>> is only available from another source >>>> >>>> >>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>> >>>> Presumably something change in the last week to break >>>> things....pretty much depend upon this working to do much of my >>>> testing on travis-ci:( >>>> >>>> Dale >>>> >>>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 >>>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 >>> >> >

Feb. 9, 2015

Re: [Pharo-dev] Slides PharoDays...

by Thierry Goubier

Thanks, Marcus :) Thierry 2015-02-09 18:58 GMT+01:00 Marcus Denker <marcus.denker(a)inria.fr>: > Hi, > > Another one: > > Professional Source Code Management with Pharo by Thierry Goubier > > http://www.slideshare.net/pharoproject/pharo-days-sourcecodemanagement > > > Marcus > > > >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Norbert Hartl

Dale, > Am 09.02.2015 um 19:07 schrieb Dale Henrichs <dale.henrichs(a)gemtalksystems.com>: > > Thanks Norbert, > > Is there a way that you can update the zero-conf script (http://get.pharo.org/travis <http://get.pharo.org/travis>) with the proper incantation? > I don't know anything about the zeroconf stuff. > I really would rather not have to reinvent the zero conf system for pharo, unless the whole zero conf system is being deprecated ... I haven't googled that yet ... > > Something changed in the last 5 days and I don't imagine that it is a missing `sudo dpkg --add-architecture i386` that changed ... unless someone removed that line from the zero conf script ... > Maybe you have a newer linux distro where you try to deploy? But I'm only guessing and not much of a help here. I hope anyone will stand up and clarify it. Norbert > Dale > > On 02/09/2015 10:01 AM, Norbert Hartl wrote: >> Dale, >> >> in newer linux systems i386 packages are not included by default. You need to add the architecture. All steps you can see on http://pharo.org/download <http://pharo.org/download> >> >> sudo add-apt-repository ppa:pharo/stable >> sudo dpkg --add-architecture i386 >> sudo apt-get update >> sudo apt-get install pharo-vm-core >> >> Hope that helps, >> >> Norbert >> >> >>> Am 09.02.2015 um 18:57 schrieb Dale Henrichs <dale.henrichs(a)gemtalksystems.com <mailto:dale.henrichs@gemtalksystems.com>>: >>> >>> I see that https://launchpad.net/~pharo/+archive/ubuntu/stable <https://launchpad.net/%7Epharo/+archive/ubuntu/stable> exists and it looks like pharo-vm-core:i386 is there,and the packages were built 5 days ago (the date of my last good run) but when I follow this link >>> >>> http://pharo.org/pharo-download/ubuntu <http://pharo.org/pharo-download/ubuntu> >>> >>> on the https://launchpad.net/~pharo/+archive/ubuntu/stable <https://launchpad.net/%7Epharo/+archive/ubuntu/stable> site under "PPA description" I get: >>> >>> Not Found /web/pharo-download/ubuntu >>> >>> Which looks suspiciously like a Seaside not found message .... of course I don't know whether http://pharo.org/pharo-download/ubuntu <http://pharo.org/pharo-download/ubuntu>needs to work as I haven't figured out where `ppa:pharo/stable` is actually defined: >>> >>> sudo add-apt-repository ppa:pharo/stable >>> >>> >>> Dale >>> >>> On 02/09/2015 09:44 AM, Dale Henrichs wrote: >>>> Can I get some pointers as to where the mystical pharo-vm-core:i386 is so that I can build (and maintain) my own pharo install scripts? >>>> >>>> Any help appreciated.... >>>> >>>> Dale >>>> >>>> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>>>> It looks like the following script started failing within the last 5 days sometime: >>>>> >>>>> wget --quiet -O - get.pharo.org/travis+vm <http://get.pharo.org/travis+vm> | bash >>>>> >>>>> getting this error (on ubunutu12.04): >>>>> >>>>> Fetched 18.5 kB in 4s (4,028 B/s) >>>>> Reading package lists... Done >>>>> Reading package lists... Done >>>>> Building dependency tree >>>>> Reading state information... Done >>>>> Package pharo-vm-core:i386 is not available, but is referred to by another package. >>>>> This may mean that the package is missing, has been obsoleted, or >>>>> is only available from another source >>>>> >>>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>>> >>>>> >>>>> 5 days ago this is what the same log section looked like[1]: >>>>> >>>>> Fetched 15.6 kB in 1s (9,597 B/s) >>>>> Reading >>>>> package lists... Done >>>>> Reading >>>>> package lists... Done >>>>> Building >>>>> dependency tree >>>>> Reading >>>>> state information... Done >>>>> The following package was automatically >>>>> installed and is no longer required: >>>>> libgeos-3.2.2 >>>>> Use 'apt-get autoremove' to remove >>>>> them. >>>>> Suggested packages: >>>>> pharo-vm-desktop:i386 >>>>> The following NEW packages will be >>>>> installed: >>>>> pharo-vm-core:i386 >>>>> 0 upgraded, 1 newly installed, 0 to >>>>> remove and 174 not upgraded. >>>>> Need to get 14.5 MB of archives. >>>>> >>>>> >>>>> >>>>> Then 2 days ago, the above error started happening[2]: >>>>> >>>>> Fetched 18.5 kB in 4s (4,214 B/s) >>>>> Reading >>>>> package lists... Done >>>>> Reading >>>>> package lists... Done >>>>> Building >>>>> dependency tree >>>>> Reading >>>>> state information... Done >>>>> Package pharo-vm-core:i386 is not >>>>> available, but is referred to by another >>>>> package. >>>>> This may mean that the package is >>>>> missing, has been obsoleted, or >>>>> is only available from another source >>>>> >>>>> >>>>> >>>>> E: Package 'pharo-vm-core:i386' has no >>>>> installation candidate >>>>> >>>>> Presumably something change in the last week to break things....pretty much depend upon this working to do much of my testing on travis-ci:( >>>>> >>>>> Dale >>>>> >>>>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 <https://travis-ci.org/dalehenrich/tode/jobs/49400710> >>>>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 <https://travis-ci.org/dalehenrich/tode/jobs/49776435> >>>> >>> >> >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Dale Henrichs

Thanks Norbert, Is there a way that you can update the zero-conf script (http://get.pharo.org/travis) with the proper incantation? I really would rather not have to reinvent the zero conf system for pharo, unless the whole zero conf system is being deprecated ... I haven't googled that yet ... Something changed in the last 5 days and I don't imagine that it is a missing `sudo dpkg --add-architecture i386` that changed ... unless someone removed that line from the zero conf script ... Dale On 02/09/2015 10:01 AM, Norbert Hartl wrote: > Dale, > > in newer linux systems i386 packages are not included by default. You > need to add the architecture. All steps you can see on > http://pharo.org/download > > |sudo add-apt-repository ppa:pharo/stable > sudo dpkg --add-architecture i386 > sudo apt-get update > sudo apt-get install pharo-vm-core| > > Hope that helps, > > Norbert > > >> Am 09.02.2015 um 18:57 schrieb Dale Henrichs >> <dale.henrichs(a)gemtalksystems.com >> <mailto:dale.henrichs@gemtalksystems.com>>: >> >> I see that https://launchpad.net/~pharo/+archive/ubuntu/stable exists >> and it looks like pharo-vm-core:i386 is there,and the packages were >> built 5 days ago (the date of my last good run) but when I follow >> this link >> >> http://pharo.org/pharo-download/ubuntu >> >> on the https://launchpad.net/~pharo/+archive/ubuntu/stable site under >> "PPA description" I get: >> >> Not Found /web/pharo-download/ubuntu >> >> Which looks suspiciously like a Seaside not found message .... of >> course I don't know whether http://pharo.org/pharo-download/ubuntu >> needs to work as I haven't figured out where `ppa:pharo/stable` is >> actually defined: >> >> sudo add-apt-repository ppa:pharo/stable >> >> >> Dale >> >> On 02/09/2015 09:44 AM, Dale Henrichs wrote: >>> Can I get some pointers as to where the mystical pharo-vm-core:i386 >>> is so that I can build (and maintain) my own pharo install scripts? >>> >>> Any help appreciated.... >>> >>> Dale >>> >>> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>>> It looks like the following script started failing within the last >>>> 5 days sometime: >>>> >>>> wget --quiet -O - get.pharo.org/travis+vm >>>> <http://get.pharo.org/travis+vm> | bash >>>> >>>> getting this error (on ubunutu12.04): >>>> >>>> Fetched 18.5 kB in 4s (4,028 B/s) >>>> Reading package lists... Done >>>> Reading package lists... Done >>>> Building dependency tree >>>> Reading state information... Done >>>> Package pharo-vm-core:i386 is not available, but is referred to by >>>> another package. >>>> This may mean that the package is missing, has been obsoleted, or >>>> is only available from another source >>>> >>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>> >>>> >>>> 5 days ago this is what the same log section looked like[1]: >>>> >>>> Fetched 15.6 kB in 1s (9,597 B/s) >>>> Reading package lists... Done >>>> Reading package lists... Done >>>> Building dependency tree >>>> Reading state information... Done >>>> The following package was automatically installed and is no longer >>>> required: >>>> libgeos-3.2.2 >>>> Use 'apt-get autoremove' to remove them. >>>> Suggested packages: >>>> pharo-vm-desktop:i386 >>>> The following NEW packages will be installed: >>>> pharo-vm-core:i386 >>>> 0 upgraded, 1 newly installed, 0 to remove and 174 not upgraded. >>>> Need to get 14.5 MB of archives. >>>> >>>> Then 2 days ago, the above error started happening[2]: >>>> >>>> Fetched 18.5 kB in 4s (4,214 B/s) >>>> Reading package lists... Done >>>> Reading package lists... Done >>>> Building dependency tree >>>> Reading state information... Done >>>> Package pharo-vm-core:i386 is not available, but is referred to by >>>> another package. >>>> This may mean that the package is missing, has been obsoleted, or >>>> is only available from another source >>>> >>>> >>>> E: Package 'pharo-vm-core:i386' has no installation candidate >>>> >>>> Presumably something change in the last week to break >>>> things....pretty much depend upon this working to do much of my >>>> testing on travis-ci:( >>>> >>>> Dale >>>> >>>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 >>>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 >>> >> >

Feb. 9, 2015

Re: [Pharo-dev] get.pharo.org/travis+vm failing: Package 'pharo-vm-core:i386' has no installation candidate

by Norbert Hartl

Dale, in newer linux systems i386 packages are not included by default. You need to add the architecture. All steps you can see on http://pharo.org/download <http://pharo.org/download> sudo add-apt-repository ppa:pharo/stable sudo dpkg --add-architecture i386 sudo apt-get update sudo apt-get install pharo-vm-core Hope that helps, Norbert > Am 09.02.2015 um 18:57 schrieb Dale Henrichs <dale.henrichs(a)gemtalksystems.com>: > > I see that https://launchpad.net/~pharo/+archive/ubuntu/stable <https://launchpad.net/~pharo/+archive/ubuntu/stable> exists and it looks like pharo-vm-core:i386 is there,and the packages were built 5 days ago (the date of my last good run) but when I follow this link > > http://pharo.org/pharo-download/ubuntu <http://pharo.org/pharo-download/ubuntu> > > on the https://launchpad.net/~pharo/+archive/ubuntu/stable <https://launchpad.net/~pharo/+archive/ubuntu/stable> site under "PPA description" I get: > > Not Found /web/pharo-download/ubuntu > > Which looks suspiciously like a Seaside not found message .... of course I don't know whether http://pharo.org/pharo-download/ubuntu <http://pharo.org/pharo-download/ubuntu>needs to work as I haven't figured out where `ppa:pharo/stable` is actually defined: > > sudo add-apt-repository ppa:pharo/stable > > > Dale > > On 02/09/2015 09:44 AM, Dale Henrichs wrote: >> Can I get some pointers as to where the mystical pharo-vm-core:i386 is so that I can build (and maintain) my own pharo install scripts? >> >> Any help appreciated.... >> >> Dale >> >> On 02/08/2015 06:54 PM, Dale Henrichs wrote: >>> It looks like the following script started failing within the last 5 days sometime: >>> >>> wget --quiet -O - get.pharo.org/travis+vm | bash >>> >>> getting this error (on ubunutu12.04): >>> >>> Fetched 18.5 kB in 4s (4,028 B/s) >>> Reading package lists... Done >>> Reading package lists... Done >>> Building dependency tree >>> Reading state information... Done >>> Package pharo-vm-core:i386 is not available, but is referred to by another package. >>> This may mean that the package is missing, has been obsoleted, or >>> is only available from another source >>> >>> E: Package 'pharo-vm-core:i386' has no installation candidate >>> >>> >>> 5 days ago this is what the same log section looked like[1]: >>> >>> Fetched >>> >>> 15.6 kB in 1s (9,597 B/s) >>> Reading package >>> lists... Done >>> Reading package >>> lists... Done >>> Building dependency >>> tree >>> Reading state >>> information... Done >>> The >>> following package was automatically installed and is no >>> longer required: >>> >>> libgeos-3.2.2 >>> Use >>> 'apt-get autoremove' to remove them. >>> Suggested >>> >>> packages: >>> >>> pharo-vm-desktop:i386 >>> The >>> following NEW packages will be installed: >>> >>> pharo-vm-core:i386 >>> 0 >>> upgraded, 1 newly installed, 0 to remove and 174 not >>> upgraded. >>> Need >>> to get 14.5 MB of archives. >>> >>> >>> >>> Then 2 days ago, the above error started happening[2]: >>> >>> Fetched >>> >>> 18.5 kB in 4s (4,214 B/s) >>> Reading package >>> lists... Done >>> Reading package >>> lists... Done >>> Building dependency >>> tree >>> Reading state >>> information... Done >>> Package >>> >>> pharo-vm-core:i386 is not available, but is referred to by >>> another package. >>> This >>> may mean that the package is missing, has been obsoleted, or >>> is >>> only available from another source >>> >>> E: >>> Package 'pharo-vm-core:i386' has no installation candidate >>> >>> Presumably something change in the last week to break things....pretty much depend upon this working to do much of my testing on travis-ci:( >>> >>> Dale >>> >>> [1] https://travis-ci.org/dalehenrich/tode/jobs/49400710 <https://travis-ci.org/dalehenrich/tode/jobs/49400710> >>> [2] https://travis-ci.org/dalehenrich/tode/jobs/49776435 <https://travis-ci.org/dalehenrich/tode/jobs/49776435> >> >

Feb. 9, 2015