September 2014 - Pharo-dev - lists.pharo.org

Re: [Pharo-dev] csv2html the Pharo version

by Sven Van Caekenberghe

Hi Andreas, On 26 Sep 2014, at 22:25, Andreas Wacknitz <a.wacknitz(a)gmx.de> wrote: > Am 18.09.2014 um 10:28 schrieb Sven Van Caekenberghe <sven(a)stfx.eu>: > >> Hi, >> >> Today I came across some bash code on a web page that loves Smalltalk, ah the horror ;-) >> >> http://car.mines-douai.fr/2014/09/csv2html/ >> >> The goal is to make it easier to look at CSV data, for which a conversion to HTML was done. To just look at CSV data in a nice tabular form, we do not have to leave Pharo at all. >> >> MultiColumnListModel new >> items: (FileLocator desktop / 'test.csv' readStreamDo: [ :in | >> (NeoCSVReader on: in) emptyFieldValue: ''; upToEnd ]); > What version of NeoCSV has >>emptyFieldValue:? > (And where can I get it?) > I havenât seen this method yetâ¦ It was in #bleedingEdge, I made a new #stable version of ConfigurationOfNeoCSV (v11). You can use the Configuration Browser in Pharo 3.0 or load via Gofer (the project is on StHub as well). HTH, Sven

Sept. 26, 2014

Re: [Pharo-dev] csv2html the Pharo version

by Andreas Wacknitz

Am 18.09.2014 um 10:28 schrieb Sven Van Caekenberghe <sven(a)stfx.eu>: > Hi, > > Today I came across some bash code on a web page that loves Smalltalk, ah the horror ;-) > > http://car.mines-douai.fr/2014/09/csv2html/ > > The goal is to make it easier to look at CSV data, for which a conversion to HTML was done. To just look at CSV data in a nice tabular form, we do not have to leave Pharo at all. > > MultiColumnListModel new > items: (FileLocator desktop / 'test.csv' readStreamDo: [ :in | > (NeoCSVReader on: in) emptyFieldValue: ''; upToEnd ]); What version of NeoCSV has >>emptyFieldValue:? (And where can I get it?) I havenât seen this method yetâ¦ Regards, Andreas

Sept. 26, 2014

Re: [Pharo-dev] Building .deb with Pharo VM

by Jan Vrany

Hi Damien, On Fri, 2014-09-26 at 17:56 +0200, Damien Cassou wrote: > On Fri, Sep 26, 2014 at 9:42 AM, Jan Vrany <jan.vrany(a)fit.cvut.cz> wrote: > > However, I already exhausted my free time. I'll try again later and > > get back to you. > > > I created a job that builds a nice archive with pre-patched sources: > http://files.pharo.org/vm/src/vm-unix-sources/blessed. > Very nice indeed. This one works like a charm. Thank you very much. Best, Jan

Sept. 26, 2014

Re: [Pharo-dev] Nautilus roadmap / icons

by Eliot Miranda

Hi Marcus, On Thu, Sep 25, 2014 at 11:29 PM, Marcus Denker <marcus.denker(a)inria.fr> wrote: > > On 25 Sep 2014, at 23:02, phil(a)highoctane.be wrote: > > > Well, the full story is that the decompiler is now gone with Opal. > > > There is a decompiler again in Pharo4 > > > So, there were 3 in the beginning. So, of course with 2, this becomes a > switch. > > > > Why no decompiler anymore, for the layman I am? > > > The *option* of showing decompiled code in the browser: Honestly, I do not > get > why this was useful, ever. > I can think of three reasons. 1. mutable literals. using the decompiler is a quick way to check if a literal has been corrupted/modified 2. if you're working on the decompiler this is convenient 3. when Dan's encode temp names in trailer and decompile scheme was being developed/used there would be no need to display sources > Marcus > -- best, Eliot

Sept. 26, 2014

Re: [Pharo-dev] Windows not interactive

by Max Leske

I can confirm that the bug has existed since at least 1.3. I saw it a couple of weeks back and had to do SystemWindow allSubInstances do: #close to get rid of them. Canât provide more detail though. Iâll keep my eyes open though. Max On 26.09.2014, at 19:35, stepharo <stepharo(a)free.fr> wrote: > yes we do not know how to reproduce this bug and it is annoying. > > > On 26/9/14 13:30, Natalia Tymchuk wrote: >> Hi. >> I got the situation when all my windows are not interactive and when I click somewhere on windows and tabs the world menu appears. However I can open new window and work with it. >> What should I do in this situation? >> Best regards, >> Natalia >> >> > >

Sept. 26, 2014

Re: [Pharo-dev] [Review: 11536] Add Stream >> printString:

by Max Leske

On 26.09.2014, at 18:44, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > On 26 Sep 2014, at 18:21, Eliot Miranda <eliot.miranda(a)gmail.com> wrote: > >> >> >> On Fri, Sep 26, 2014 at 6:20 AM, Max Leske <maxleske(a)gmail.com> wrote: >> >> On 20.09.2014, at 03:02, Esteban A. Maringolo <emaringolo(a)gmail.com> wrote: >> >>> 2014-09-19 20:59 GMT-03:00 Eliot Miranda <eliot.miranda(a)gmail.com>: >>>> >>>> >>>> On Fri, Sep 19, 2014 at 1:19 AM, Max Leske <maxleske(a)gmail.com> wrote: >>>>> >>>>> This issue was more of a discussion between Camillo and Sven. They never >>>>> reached a conclusion, so please take a look. Iâve compiled the transcript >>>>> below. >>>>> >>>>> The issue isnât easy to solve and maybe we can just close it as ânot >>>>> importantâ. >>>> >>>> >>>> +1. But isn't the selector printString: broken? >>> >>> >>> The selector sounds broken to me too. >>> >>> I always bring Dolphin to the discussion, but Dolphin streams had both >>> #print:/#display: >>> >>> WriteStream>>#print: anObject >>> anObject printOn: aStream. >>> >>> WriteStream>>#display: anObject >>> anObject displayOn: aStream. >>> >>> But those are for printing/displaying the argument on the stream, >>> which is not exactly the same as sending #asString and then then >>> appending the result to receiver. So Eliot's #printAsString: seems to >>> be the most intention revealing selector for such task. >> >> Ok, so how about adding WriteStream>>printAsString:? Implementation: >> >> printAsString: anObject >> self nextPutAll: anObject asString >> >> If you add this it also needs to be added to whatever the transcript streams are. The two should have the same protocol for writing. Right now there are a number of missing methods on the transcript side. > > I still don't like it, we're just adding methods, making the API fatter, for what exactly ? > > What is the difference between > > stream printAsString: foo > > and > > stream << foo asString None really. Actually I donât quite see why #asString should ever be sent (except for during error handling maybe). I usually override #printOn: for displaying information about an object during development and use a specific implementation when I want to store an object on a stream. So I rarely need #asString in combination with streams. > > ? > > Do we really need this ? No, I guess not. It has worked fine so far. But since the discussion was opened I thought Iâd push a little :) So: anybody opposed to closing this issue? Cheers, Max > > Sven

Sept. 26, 2014

[pharo-project/pharo-core]

by GitHub

Branch: refs/tags/40262 Home: https://github.com/pharo-project/pharo-core

Sept. 26, 2014

[pharo-project/pharo-core] 6e4318: 40262

by GitHub

Branch: refs/heads/4.0 Home: https://github.com/pharo-project/pharo-core Commit: 6e4318b1abaf7b7100ec387e2776ade23a163f10 https://github.com/pharo-project/pharo-core/commit/6e4318b1abaf7b7100ec387e… Author: Jenkins Build Server <board(a)pharo-project.org> Date: 2014-09-26 (Fri, 26 Sep 2014) Changed paths: M KernelTests.package/ClassHierarchyTest.class/class/fixing/fixSlotScope.st M Nautilus.package/AbstractNautilusUI.class/instance/private/runTestsOfClass_notifying_.st A ScriptLoader40.package/ScriptLoader.class/instance/pharo - scripts/script262.st A ScriptLoader40.package/ScriptLoader.class/instance/pharo - scripts/scriptnil.st M ScriptLoader40.package/ScriptLoader.class/instance/pharo - updates/update40261.st A ScriptLoader40.package/ScriptLoader.class/instance/pharo - updates/update40262.st M ScriptLoader40.package/ScriptLoader.class/instance/public/commentForCurrentUpdate.st Log Message: ----------- 40262 13606 testSlotScopeParallelism is failing https://pharo.fogbugz.com/f/cases/13606 14085 Image blocked when halt placed on setUp method and running a whole TestCase from Nautilus https://pharo.fogbugz.com/f/cases/14085 http://files.pharo.org/image/40/40262.zip

Sept. 26, 2014

Re: [Pharo-dev] Exceptions chapter of Deep Into Pharo

by Martin McClure

On 09/25/2014 04:08 AM, Damien Cassou wrote: > On Thu, Sep 25, 2014 at 10:27 AM, stepharo <stepharo(a)free.fr> wrote: >> martin what is your account name? >> because I could not find you in the user list > > > it is possible that his account is not yet visible because > unconfirmed. Martin has to wait for an answer from the help center. > Right. Finally got that straightened out, and have entered my request to join the project. Account name is martinmcclure. Regards, -Martin

Sept. 26, 2014

Re: [Pharo-dev] Windows not interactive

by stepharo

yes we do not know how to reproduce this bug and it is annoying. On 26/9/14 13:30, Natalia Tymchuk wrote: > Hi. > I got the situation when all my windows are not interactive and when I click somewhere on windows and tabs the world menu appears. However I can open new window and work with it. > What should I do in this situation? > Best regards, > Natalia > >

Sept. 26, 2014