April 2013 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Nautilus accessor over-generation

by Sean P. DeNigris

Benjamin Van Ryseghem-2 wrote > Since Nautilus is meant to also work without the refactoring engine, I > have provided the Analyze menu Maybe it could appear conditionally - only if refactoring is not present - and be called something more similar to "Refactoring" like "Basic Refactoring"... ----- Cheers, Sean -- View this message in context: http://forum.world.st/Nautilus-accessor-over-generation-tp4679480p4679575.h… Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Igor Stasenko

With this patch it works for me. On 4 April 2013 10:54, Johan Brichau <johan(a)inceptive.be> wrote: > > On 04 Apr 2013, at 10:40, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > >>> In any case, is it difficult to enable the both <tab> and <enter>? >> >> yes and no... >> I mean. It is easy, but is hardcoded in >> >> NECController>>handleKeystrokeBefore:editor: >> >> so... you can hack around there :) > > That is what I needed to know :-) > > cheers > Johan > -- Best regards, Igor Stasenko.

April 4, 2013

Re: [Pharo-project] Generating the command line bash scripts

by Andrei Vasile Chis

Super. Thanks a lot. Andrei On Thu, Apr 4, 2013 at 1:12 PM, Camillo Bruni <camillobruni(a)gmail.com>wrote: > It is all here: > > http://smalltalkhub.com/#!/~Pharo/ZeroConf > > I think I didn't create a configuration yet, but there are no external > dependencies anyway. > After install the latest package you can generate all scripts like this: > > ./pharo Pharo.Image zeroconf > > and you will get a bunch of scripts next to your image. > > On 2013-04-04, at 12:46, Andrei Vasile Chis <chisvasileandrei(a)gmail.com> > wrote: > > > Hi Camillo, > > > > Do you use some code to generate the bash scripts for downloading the > image > > and the vm? If yes it is it available somewhere? > > > > Cheers, > > Andrei > > >

April 4, 2013

Re: [Pharo-project] Generating the command line bash scripts

by Camillo Bruni

It is all here: http://smalltalkhub.com/#!/~Pharo/ZeroConf I think I didn't create a configuration yet, but there are no external dependencies anyway. After install the latest package you can generate all scripts like this: ./pharo Pharo.Image zeroconf and you will get a bunch of scripts next to your image. On 2013-04-04, at 12:46, Andrei Vasile Chis <chisvasileandrei(a)gmail.com> wrote: > Hi Camillo, > > Do you use some code to generate the bash scripts for downloading the image > and the vm? If yes it is it available somewhere? > > Cheers, > Andrei

April 4, 2013

[Pharo-project] Generating the command line bash scripts

by Andrei Vasile Chis

Hi Camillo, Do you use some code to generate the bash scripts for downloading the image and the vm? If yes it is it available somewhere? Cheers, Andrei

April 4, 2013

Re: [Pharo-project] Cycling Through Open Windows Using Key Combination

by Sven Van Caekenberghe

On 04 Apr 2013, at 12:17, S Krish <krishnamachari.sudhakar(a)gmail.com> wrote: > I did a little hack to get that with CTRL+W. will need to dig out the hack code and can send it over.. OK, but doesn't that key combination close a window ? Anyway, looking forward to it. > On Thu, Apr 4, 2013 at 3:45 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Hi, > > Is there a key combination to cycle through open windows ? > > I am using Apple-Tab a lot to cycle between open applications on my Mac, and Apple-~ to cycle between open windows in one application. I would love to be able to do something similar inside Pharo. > > 9 changes out of 10 somebody already did this, maybe it is even in the image. > > Thx, > > Sven > > > -- > Sven Van Caekenberghe > http://stfx.eu > Smalltalk is the Red Pill

April 4, 2013

Re: [Pharo-project] Cycling Through Open Windows Using Key Combination

by S Krish

I did a little hack to get that with CTRL+W. will need to dig out the hack code and can send it over.. On Thu, Apr 4, 2013 at 3:45 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Hi, > > Is there a key combination to cycle through open windows ? > > I am using Apple-Tab a lot to cycle between open applications on my Mac, > and Apple-~ to cycle between open windows in one application. I would love > to be able to do something similar inside Pharo. > > 9 changes out of 10 somebody already did this, maybe it is even in the > image. > > Thx, > > Sven > > > -- > Sven Van Caekenberghe > http://stfx.eu > Smalltalk is the Red Pill > > >

April 4, 2013

[Pharo-project] Cycling Through Open Windows Using Key Combination

by Sven Van Caekenberghe

Hi, Is there a key combination to cycle through open windows ? I am using Apple-Tab a lot to cycle between open applications on my Mac, and Apple-~ to cycle between open windows in one application. I would love to be able to do something similar inside Pharo. 9 changes out of 10 somebody already did this, maybe it is even in the image. Thx, Sven -- Sven Van Caekenberghe http://stfx.eu Smalltalk is the Red Pill

April 4, 2013

Re: [Pharo-project] SystemNavigation API: browseAllXyz vs. browseAbc

by stephane ducasse

we should clean the api. On Apr 3, 2013, at 7:39 PM, Sean P. DeNigris <sean(a)clipperadams.com> wrote: > Some selectors are of the form browseAllXyz (e.g. browseAllSendersOf:), while > others are like browseAbc (e.g. browseSendersOf:name:autoSelect:) > > The "All"s seem extraneous. If the thing being browsed is plural (e.g. > Senders instead of sender), that implies "All" since there are no other > qualifiers, and there's no alternate case unlike subclasses v.s. > allSubclasses. > > > > ----- > Cheers, > Sean > -- > View this message in context: http://forum.world.st/SystemNavigation-API-browseAllXyz-vs-browseAbc-tp4679… > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. >

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Diego Lont

Op 4 apr. 2013, om 10:30 heeft Johan Brichau het volgende geschreven: > Hi Esteban, > > I tend to agree with your argument but... > >> about the current defaults, "enter" is the one that is choose for 99% of IDEs around the world (and yes, the 1% default is probably just Pharo 1.4). > > > All those IDEs offer both <tab> and <enter> to trigger code completion. > If I enable <enter> in Pharo, the <tab> no longer works. > > I also wonder why I don't find the <enter> behavior annoying in other IDEs. Can it be the case that Smalltalk code has more 'line ends' that just terminate with a word? In many other languages, a code line is more often terminated with a non alphanumeric character (separators, braces, etc...). I am not sure about this but I wonder... Yes, most programming languages end the line with a separator, you often don't use in Smalltalk, just to structure your code. Also, more important, when I see this happen, > I can press backspace, that undo's the correction that was made. > this does not happen when my code is already valid So I also want the defaults changed: tab should complete my smalltalk code, not enter. Regards, Diego

April 4, 2013