April 2013 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Nautilus accessor over-generation

by Mariano Martinez Peck

On Thu, Apr 4, 2013 at 9:07 AM, Sean P. DeNigris <sean(a)clipperadams.com>wrote: > Benjamin Van Ryseghem-2 wrote > > Since Nautilus is meant to also work without the refactoring engine, I > > have provided the Analyze menu > > Maybe it could appear conditionally - only if refactoring is not present - > and be called something more similar to "Refactoring" like "Basic > Refactoring"... > > +1 I also found confusing Sean observation. Also, sometimes I did have some of the setters/getters before and I didn't like Nautilus would recreate them anyway (without warning me that some of them were already defined). This is problematic when you use lazy getters (getters in which you set something only when nil). Best, > > > ----- > Cheers, > Sean > -- > View this message in context: > http://forum.world.st/Nautilus-accessor-over-generation-tp4679480p4679575.h… > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > -- Mariano http://marianopeck.wordpress.com

April 4, 2013

Re: [Pharo-project] SystemNavigation API: browseAllXyz vs. browseAbc

by stephane ducasse

On Apr 4, 2013, at 2:32 PM, Luc Fabresse <luc.fabresse(a)gmail.com> wrote: > > > 2013/4/4 stephane ducasse <stephane.ducasse(a)free.fr> > we should clean the api. > > behind the API, should we use Ring internally? > I would say yes. Yes probably > Another point is about the environment to scope queries, currently it is a SystemDictionary but shouldn't it something else so that we can scope to one class, one RPackage, many â¦.? We should have a look at RBEnvironment too. Stef > > Luc > > > On Apr 3, 2013, at 7:39 PM, Sean P. DeNigris <sean(a)clipperadams.com> wrote: > > > Some selectors are of the form browseAllXyz (e.g. browseAllSendersOf:), while > > others are like browseAbc (e.g. browseSendersOf:name:autoSelect:) > > > > The "All"s seem extraneous. If the thing being browsed is plural (e.g. > > Senders instead of sender), that implies "All" since there are no other > > qualifiers, and there's no alternate case unlike subclasses v.s. > > allSubclasses. > > > > > > > > ----- > > Cheers, > > Sean > > -- > > View this message in context: http://forum.world.st/SystemNavigation-API-browseAllXyz-vs-browseAbc-tp4679… > > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > > > >

April 4, 2013

[Pharo-project] cleaning the PharoCollaboractive book

by StÃ©phane Ducasse

Hi guys I'm doing a pass on the collaborative book and in particular in the tools part. I think that we should really use this place to describe the cool library we have. Probably in the future we should generate gutenberg information from the package metadata of the published package so like that we would have an up to date description of our stack. Stef

April 4, 2013

Re: [Pharo-project] SystemNavigation API: browseAllXyz vs. browseAbc

by Benjamin

You can also provide a RBBrowserEnvironment (that's what Nautilus is doing) Ben On Apr 4, 2013, at 2:32 PM, Luc Fabresse <luc.fabresse(a)gmail.com> wrote: > > > 2013/4/4 stephane ducasse <stephane.ducasse(a)free.fr> > we should clean the api. > > behind the API, should we use Ring internally? > I would say yes. > > Another point is about the environment to scope queries, currently it is a SystemDictionary but shouldn't it something else so that we can scope to one class, one RPackage, many ....? > > Luc > > > On Apr 3, 2013, at 7:39 PM, Sean P. DeNigris <sean(a)clipperadams.com> wrote: > > > Some selectors are of the form browseAllXyz (e.g. browseAllSendersOf:), while > > others are like browseAbc (e.g. browseSendersOf:name:autoSelect:) > > > > The "All"s seem extraneous. If the thing being browsed is plural (e.g. > > Senders instead of sender), that implies "All" since there are no other > > qualifiers, and there's no alternate case unlike subclasses v.s. > > allSubclasses. > > > > > > > > ----- > > Cheers, > > Sean > > -- > > View this message in context: http://forum.world.st/SystemNavigation-API-browseAllXyz-vs-browseAbc-tp4679… > > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > > > >

April 4, 2013

Re: [Pharo-project] SystemNavigation API: browseAllXyz vs. browseAbc

by Luc Fabresse

2013/4/4 stephane ducasse <stephane.ducasse(a)free.fr> > we should clean the api. > behind the API, should we use Ring internally? I would say yes. Another point is about the environment to scope queries, currently it is a SystemDictionary but shouldn't it something else so that we can scope to one class, one RPackage, many ....? Luc > > On Apr 3, 2013, at 7:39 PM, Sean P. DeNigris <sean(a)clipperadams.com> > wrote: > > > Some selectors are of the form browseAllXyz (e.g. browseAllSendersOf:), > while > > others are like browseAbc (e.g. browseSendersOf:name:autoSelect:) > > > > The "All"s seem extraneous. If the thing being browsed is plural (e.g. > > Senders instead of sender), that implies "All" since there are no other > > qualifiers, and there's no alternate case unlike subclasses v.s. > > allSubclasses. > > > > > > > > ----- > > Cheers, > > Sean > > -- > > View this message in context: > http://forum.world.st/SystemNavigation-API-browseAllXyz-vs-browseAbc-tp4679… > > Sent from the Pharo Smalltalk mailing list archive at Nabble.com. > > > > >

April 4, 2013

Re: [Pharo-project] Cycling Through Open Windows Using Key Combination

by S Krish

It was CTRL + tab in the Pharo 1.4 This hack was to override Morph>>tabKey: event in that execute a new method block [ World tabOpenWindows: event ]. PasteUpMorph>> *tabOpenWindows: aKeyboardEvent* * * *| currentFocus index |* * * *currentFocus := aKeyboardEvent hand keyboardFocus.* *SystemWindow noteTopeWindowIn: self.* *System topWindow sendToBack.* this did work well in 1.4 but in 2.0 there is an override to key handling with KMDispatcher >> dispatchKeystroke: aKeyEvent that not so clearly ends up handling CTRL+tab Need to check and revert if that hack can be plugged on to 2.0 trivially. On Thu, Apr 4, 2013 at 3:50 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > On 04 Apr 2013, at 12:17, S Krish <krishnamachari.sudhakar(a)gmail.com> > wrote: > > > I did a little hack to get that with CTRL+W. will need to dig out the > hack code and can send it over.. > > OK, but doesn't that key combination close a window ? > Anyway, looking forward to it. > > > On Thu, Apr 4, 2013 at 3:45 PM, Sven Van Caekenberghe <sven(a)stfx.eu> > wrote: > > Hi, > > > > Is there a key combination to cycle through open windows ? > > > > I am using Apple-Tab a lot to cycle between open applications on my Mac, > and Apple-~ to cycle between open windows in one application. I would love > to be able to do something similar inside Pharo. > > > > 9 changes out of 10 somebody already did this, maybe it is even in the > image. > > > > Thx, > > > > Sven > > > > > > -- > > Sven Van Caekenberghe > > http://stfx.eu > > Smalltalk is the Red Pill > > >

April 4, 2013

Re: [Pharo-project] Cycling Through Open Windows Using Key Combination

by Benjamin

alt+tab / alt+shift+tab Ben On Apr 4, 2013, at 2:08 PM, "Esteban A. Maringolo" <emaringolo(a)gmail.com> wrote: > Yes, CTRL-W is close window or close tab in a multidocument window in MS Windows. > > Regards, > > > ps: Yes, I said windows lots of times. :) > > Esteban A. Maringolo > > > 2013/4/4 Sven Van Caekenberghe <sven(a)stfx.eu> > > On 04 Apr 2013, at 12:17, S Krish <krishnamachari.sudhakar(a)gmail.com> wrote: > > > I did a little hack to get that with CTRL+W. will need to dig out the hack code and can send it over.. > > OK, but doesn't that key combination close a window ? > Anyway, looking forward to it. > > > On Thu, Apr 4, 2013 at 3:45 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > Hi, > > > > Is there a key combination to cycle through open windows ? > > > > I am using Apple-Tab a lot to cycle between open applications on my Mac, and Apple-~ to cycle between open windows in one application. I would love to be able to do something similar inside Pharo. > > > > 9 changes out of 10 somebody already did this, maybe it is even in the image. > > > > Thx, > > > > Sven > > > > > > -- > > Sven Van Caekenberghe > > http://stfx.eu > > Smalltalk is the Red Pill > > >

April 4, 2013

Re: [Pharo-project] Cycling Through Open Windows Using Key Combination

by Guillermo Polito

In mac there is cmd+left arrow, and cmd+right arrow... It sometimes bother me more than how useful it is, so I don't use it often... On Thu, Apr 4, 2013 at 2:08 PM, Esteban A. Maringolo <emaringolo(a)gmail.com>wrote: > Yes, CTRL-W is close window or close tab in a multidocument window in MS > Windows. > > Regards, > > > ps: Yes, I said windows lots of times. :) > > Esteban A. Maringolo > > > 2013/4/4 Sven Van Caekenberghe <sven(a)stfx.eu> > >> >> On 04 Apr 2013, at 12:17, S Krish <krishnamachari.sudhakar(a)gmail.com> >> wrote: >> >> > I did a little hack to get that with CTRL+W. will need to dig out the >> hack code and can send it over.. >> >> OK, but doesn't that key combination close a window ? >> Anyway, looking forward to it. >> >> > On Thu, Apr 4, 2013 at 3:45 PM, Sven Van Caekenberghe <sven(a)stfx.eu> >> wrote: >> > Hi, >> > >> > Is there a key combination to cycle through open windows ? >> > >> > I am using Apple-Tab a lot to cycle between open applications on my >> Mac, and Apple-~ to cycle between open windows in one application. I would >> love to be able to do something similar inside Pharo. >> > >> > 9 changes out of 10 somebody already did this, maybe it is even in the >> image. >> > >> > Thx, >> > >> > Sven >> > >> > >> > -- >> > Sven Van Caekenberghe >> > http://stfx.eu >> > Smalltalk is the Red Pill >> >> >> >

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by stephane ducasse

+ 1 > For instance i am still clueless, why 'enter' is default for autocompletion, > and disabling it and enabling 'tab' simply doesn't works. > That leaves me with the only option: keep using 'enter' for > autocompletion, if i ever want to use it. > We have to fix that. I have no idea why tab does not work.

April 4, 2013

Re: [Pharo-project] Cycling Through Open Windows Using Key Combination

by Esteban A. Maringolo

Yes, CTRL-W is close window or close tab in a multidocument window in MS Windows. Regards, ps: Yes, I said windows lots of times. :) Esteban A. Maringolo 2013/4/4 Sven Van Caekenberghe <sven(a)stfx.eu> > > On 04 Apr 2013, at 12:17, S Krish <krishnamachari.sudhakar(a)gmail.com> > wrote: > > > I did a little hack to get that with CTRL+W. will need to dig out the > hack code and can send it over.. > > OK, but doesn't that key combination close a window ? > Anyway, looking forward to it. > > > On Thu, Apr 4, 2013 at 3:45 PM, Sven Van Caekenberghe <sven(a)stfx.eu> > wrote: > > Hi, > > > > Is there a key combination to cycle through open windows ? > > > > I am using Apple-Tab a lot to cycle between open applications on my Mac, > and Apple-~ to cycle between open windows in one application. I would love > to be able to do something similar inside Pharo. > > > > 9 changes out of 10 somebody already did this, maybe it is even in the > image. > > > > Thx, > > > > Sven > > > > > > -- > > Sven Van Caekenberghe > > http://stfx.eu > > Smalltalk is the Red Pill > > >

April 4, 2013