April 2013 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Igor Stasenko

On 4 April 2013 17:38, Camillo Bruni <camillobruni(a)gmail.com> wrote: > > On 2013-04-04, at 16:11, Igor Stasenko <siguctua(a)gmail.com> wrote: > >> On 4 April 2013 15:45, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >>> really? >>> please, add an issue in the tracker and submit a slice, as everybody else. >>> >> calm down, we're just discussing here. >> I provided code here intentionally for nay-sayers like you to try it >> and to check if it not breaks >> something else (your workflow). > > Igor, not Esteban's workflow.. OUR WORKFLOW! > Sure sure. Now have you tried the code which i sent if it works/breaks for you? Or i should spend like 10 minutes filing the issue before figuring that it is unacceptable? https://pharo.fogbugz.com/default.asp?10228 -- Best regards, Igor Stasenko.

April 4, 2013

Re: [Pharo-project] [FYI] Athens tutorial

by Igor Stasenko

On 4 April 2013 17:38, Jimmie Houchin <jlhouchin(a)gmail.com> wrote: > Hello, > > I am on Ubuntu 12.10 32bit. > > I have followed the directions below for the Tutorial. > > After the bash script completed it gave me these instructions. > > Please install the 32bit libraries > sudo aptitude install ia32-libs > > I typed the above into the terminal and was told that I do not have > "aptitude" installed. > > I changed "aptitude" to "apt-get" and then was instructed that I do not have > ia32-libs. > I went to the Ubuntu Software Center. What is on Ubuntu 12.10 is > ia32-libs-multiarch. > > sudo apt-get install ia32-libs-multiarch works. > > > I then open the image and proceed with loading the code and the tutorial. > > I skip page 1 and "doit" on page 2 and I get this error. > > Error: failed to get a symbol address: cairo_image_surface_create > > As far as I can tell, I have Cairo installed on my system. I have libcairo2. > check if path to the library is correct for your OS in CairoLibraryLoader class. > I don't know if I am missing something or what I need to do. > I haven't successfully done anything that I am explicitly aware that used NB > that has worked on this system. > > I have just a standard Ubuntu 12.10 32bit install. I have the > build-essential libraries. > > Just wanted to provide some input. > > Let me know if there is something I need to install or what I can do to > help. > > Jimmie > > > > On 04/03/2013 07:07 PM, Igor Stasenko wrote: >> >> Hello, there >> >> i prepared a small tutorial for Athens, which i did today at PharoConf. >> But the code i did can be reused by non-participants of conference :) >> >> Here the instructions. >> >> Download Pharo 2.0 >> >> wget -O - get.pharo.org | bash >> >> Run Pharo 2.0 >> >> ./pharo-ui Pharo.image >> >> In a workspace, evaluate (line after line) >> >> Gofer it smalltalkhubUser: 'Pharo' project: 'Athens'; configuration; load. >> >> ConfigurationOfAthens loadVersion: '2.0'. >> >> Gofer it smalltalkhubUser: 'Pharo' project: 'Athens'; >> package:'Athens-Tutorial'; load. >> >> AthensTutorial new openWithSpec. >> >> >> Took from here >> https://gist.github.com/SergeStinckwich/44ca34b54cde83b687a3 >> (just removed duplicates ;) >> >> Thanks, Serge for compiling it down ;) >> >> Once you load the code and have window open, skip step one (you already >> did it), >> and then just follow the steps by pressing doit button changing the >> code , pressing doit again , going forwards etc .. and playing with >> it. >> I put some comments there to serve as a small description/detail. >> >> Any feedback & help & contributions & improvements is welcome. >> >> P.S. if you get a DNU at step 30, enable Freetype in settings and try >> again. >> > > -- Best regards, Igor Stasenko.

April 4, 2013

Re: [Pharo-project] [FYI] Athens tutorial

by Esteban Lorenzano

aptitude is old (some kind outdated) and I have had several problems with it. we should always recommend to use apt-get instead :) Esteban On Apr 4, 2013, at 5:38 PM, Jimmie Houchin <jlhouchin(a)gmail.com> wrote: > Hello, > > I am on Ubuntu 12.10 32bit. > > I have followed the directions below for the Tutorial. > > After the bash script completed it gave me these instructions. > > Please install the 32bit libraries > sudo aptitude install ia32-libs > > I typed the above into the terminal and was told that I do not have "aptitude" installed. > > I changed "aptitude" to "apt-get" and then was instructed that I do not have ia32-libs. > I went to the Ubuntu Software Center. What is on Ubuntu 12.10 is ia32-libs-multiarch. > > sudo apt-get install ia32-libs-multiarch works. > > > I then open the image and proceed with loading the code and the tutorial. > > I skip page 1 and "doit" on page 2 and I get this error. > > Error: failed to get a symbol address: cairo_image_surface_create > > As far as I can tell, I have Cairo installed on my system. I have libcairo2. > > I don't know if I am missing something or what I need to do. > I haven't successfully done anything that I am explicitly aware that used NB that has worked on this system. > > I have just a standard Ubuntu 12.10 32bit install. I have the build-essential libraries. > > Just wanted to provide some input. > > Let me know if there is something I need to install or what I can do to help. > > Jimmie > > > On 04/03/2013 07:07 PM, Igor Stasenko wrote: >> Hello, there >> >> i prepared a small tutorial for Athens, which i did today at PharoConf. >> But the code i did can be reused by non-participants of conference :) >> >> Here the instructions. >> >> Download Pharo 2.0 >> >> wget -O - get.pharo.org | bash >> >> Run Pharo 2.0 >> >> ./pharo-ui Pharo.image >> >> In a workspace, evaluate (line after line) >> >> Gofer it smalltalkhubUser: 'Pharo' project: 'Athens'; configuration; load. >> >> ConfigurationOfAthens loadVersion: '2.0'. >> >> Gofer it smalltalkhubUser: 'Pharo' project: 'Athens'; >> package:'Athens-Tutorial'; load. >> >> AthensTutorial new openWithSpec. >> >> >> Took from here >> https://gist.github.com/SergeStinckwich/44ca34b54cde83b687a3 >> (just removed duplicates ;) >> >> Thanks, Serge for compiling it down ;) >> >> Once you load the code and have window open, skip step one (you already did it), >> and then just follow the steps by pressing doit button changing the >> code , pressing doit again , going forwards etc .. and playing with >> it. >> I put some comments there to serve as a small description/detail. >> >> Any feedback & help & contributions & improvements is welcome. >> >> P.S. if you get a DNU at step 30, enable Freetype in settings and try again. >> > >

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Camillo Bruni

On 2013-04-04, at 16:11, Igor Stasenko <siguctua(a)gmail.com> wrote: > On 4 April 2013 15:45, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >> really? >> please, add an issue in the tracker and submit a slice, as everybody else. >> > calm down, we're just discussing here. > I provided code here intentionally for nay-sayers like you to try it > and to check if it not breaks > something else (your workflow). Igor, not Esteban's workflow.. OUR WORKFLOW!

April 4, 2013

Re: [Pharo-project] [FYI] Athens tutorial

by Jimmie Houchin

Hello, I am on Ubuntu 12.10 32bit. I have followed the directions below for the Tutorial. After the bash script completed it gave me these instructions. Please install the 32bit libraries sudo aptitude install ia32-libs I typed the above into the terminal and was told that I do not have "aptitude" installed. I changed "aptitude" to "apt-get" and then was instructed that I do not have ia32-libs. I went to the Ubuntu Software Center. What is on Ubuntu 12.10 is ia32-libs-multiarch. sudo apt-get install ia32-libs-multiarch works. I then open the image and proceed with loading the code and the tutorial. I skip page 1 and "doit" on page 2 and I get this error. Error: failed to get a symbol address: cairo_image_surface_create As far as I can tell, I have Cairo installed on my system. I have libcairo2. I don't know if I am missing something or what I need to do. I haven't successfully done anything that I am explicitly aware that used NB that has worked on this system. I have just a standard Ubuntu 12.10 32bit install. I have the build-essential libraries. Just wanted to provide some input. Let me know if there is something I need to install or what I can do to help. Jimmie On 04/03/2013 07:07 PM, Igor Stasenko wrote: > Hello, there > > i prepared a small tutorial for Athens, which i did today at PharoConf. > But the code i did can be reused by non-participants of conference :) > > Here the instructions. > > Download Pharo 2.0 > > wget -O - get.pharo.org | bash > > Run Pharo 2.0 > > ./pharo-ui Pharo.image > > In a workspace, evaluate (line after line) > > Gofer it smalltalkhubUser: 'Pharo' project: 'Athens'; configuration; load. > > ConfigurationOfAthens loadVersion: '2.0'. > > Gofer it smalltalkhubUser: 'Pharo' project: 'Athens'; > package:'Athens-Tutorial'; load. > > AthensTutorial new openWithSpec. > > > Took from here > https://gist.github.com/SergeStinckwich/44ca34b54cde83b687a3 > (just removed duplicates ;) > > Thanks, Serge for compiling it down ;) > > Once you load the code and have window open, skip step one (you already did it), > and then just follow the steps by pressing doit button changing the > code , pressing doit again , going forwards etc .. and playing with > it. > I put some comments there to serve as a small description/detail. > > Any feedback & help & contributions & improvements is welcome. > > P.S. if you get a DNU at step 30, enable Freetype in settings and try again. >

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Igor Stasenko

On 4 April 2013 15:45, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > really? > please, add an issue in the tracker and submit a slice, as everybody else. > calm down, we're just discussing here. I provided code here intentionally for nay-sayers like you to try it and to check if it not breaks something else (your workflow). > Esteban > > On Apr 4, 2013, at 1:59 PM, Igor Stasenko <siguctua(a)gmail.com> wrote: > >> With this patch it works for me. >> >> On 4 April 2013 10:54, Johan Brichau <johan(a)inceptive.be> wrote: >>> >>> On 04 Apr 2013, at 10:40, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >>> >>>>> In any case, is it difficult to enable the both <tab> and <enter>? >>>> >>>> yes and no... >>>> I mean. It is easy, but is hardcoded in >>>> >>>> NECController>>handleKeystrokeBefore:editor: >>>> >>>> so... you can hack around there :) >>> >>> That is what I needed to know :-) >>> >>> cheers >>> Johan >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko. >> <NECController-handleKeystrokeBeforeeditor.st> > > -- Best regards, Igor Stasenko.

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Esteban Lorenzano

really? please, add an issue in the tracker and submit a slice, as everybody else. Esteban On Apr 4, 2013, at 1:59 PM, Igor Stasenko <siguctua(a)gmail.com> wrote: > With this patch it works for me. > > On 4 April 2013 10:54, Johan Brichau <johan(a)inceptive.be> wrote: >> >> On 04 Apr 2013, at 10:40, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >> >>>> In any case, is it difficult to enable the both <tab> and <enter>? >>> >>> yes and no... >>> I mean. It is easy, but is hardcoded in >>> >>> NECController>>handleKeystrokeBefore:editor: >>> >>> so... you can hack around there :) >> >> That is what I needed to know :-) >> >> cheers >> Johan >> > > > > -- > Best regards, > Igor Stasenko. > <NECController-handleKeystrokeBeforeeditor.st>

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Esteban Lorenzano

On Apr 4, 2013, at 12:00 PM, Diego Lont <diego.lont(a)delware.nl> wrote: > > So I also want the defaults changed: tab should complete my smalltalk code, not enter. > defaults will not change... you will need to change your personal settings (as described some mails before) Esteban

April 4, 2013

Re: [Pharo-project] Issue 10219: Completion: enter on accept awkwardness

by Esteban Lorenzano

oh, it works... it just doesn't work as some are expecting... but we can improve that to make everyone happy :) Esteban On Apr 4, 2013, at 2:14 PM, stephane ducasse <stephane.ducasse(a)free.fr> wrote: > + 1 > >> For instance i am still clueless, why 'enter' is default for autocompletion, >> and disabling it and enabling 'tab' simply doesn't works. >> That leaves me with the only option: keep using 'enter' for >> autocompletion, if i ever want to use it. >> We have to fix that. > > I have no idea why tab does not work. >

April 4, 2013

[Pharo-project] Pharo Theming: does anyone have some doc?

by phil＠highoctane.be

I am digging inside the UITheme and friends and wondered if there was any documentation about it. Googled already but not much turned up. I've got some success in the PharoTheme (fill-style) category and now have a decent grasp of how it works (it is strange to find a ton of glamorous-xxx methods in the private category of PharoTheme but well). I want to do a high contrast/dark theme for my own work as it would be better for accessibility. I find the Darcula theme pretty neat (http://www.jetbrains.com/idea/) and use it for work. Would be lovely to have some close thing for Pharo. TIA Phil

April 4, 2013