December 2013 - Pharo-dev - lists.pharo.org

Re: [Pharo-dev] Tell me about your workflow

by Sebastian Sastre

like that? On Dec 16, 2013, at 11:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > I'm happy with your test drive :) > > I see that with your largest test, you are at ~6000ms for writing overall in the profiler (basicStoreVersion). Can you drill down a bit in it to reach places where it says FileReference>>writeStream (or something similar); this is the place where the effective writing takes place. > > Thierry > > De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] > Date d'envoi : lundi 16 dÃ©cembre 2013 13:00 > Ã : Pharo Development List > Objet : Re: [Pharo-dev] Tell me about your workflow > > Okay, I'm impressed :D > > filetree performs quite better and > > gitfiletree in 3.0 really feels great > > my incentive to upgrade went up a lot > <Screen Shot 2013-12-16 at 9.57.04 AM.png> > > On Dec 14, 2013, at 1:35 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > >> To install gitfiletree in 3.0: >> >> Install OSProcess from the configuration browser or 'do it' the following in a workspace >> >> Gofer new >> url: 'http://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/'; >> package: 'ConfigurationOfOSProcess'; >> load. >> ((Smalltalk at: #ConfigurationOfOSProcess) project version: #stable) load >> >> Gofer new >> url: 'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main'; >> package: 'MonticelloFileTree-Git'; >> load >> >> Then, in your Monticello browser, add repositories of type gitfiletree: in exactly the same way you would use filetree:. Beware: all save, copy, push and pull buttons on the GUI really do work and will call git on your behalf. If you only browse the repository, nothing will be committed or pushed. >> >> The code to profile the writing time is the following : >> >> | package dir mcR pV pVInfo | >> dir := 'temp' asFileReference. >> self assert: dir exists not. >> dir ensureCreateDirectory. >> self assert: dir isWritable. >> pV := MCWorkingCopy forPackage: (package := MCPackage named: 'Roassal'). >> pVInfo := pV ancestry ancestors first. >> mcR := MCFileTreeRepository new directory: dir. >> TimeProfiler spyAllOn: [mcR >> basicStoreVersion: >> (MCVersion new >> setPackage: package >> info: pVInfo >> snapshot: pV snapshot >> dependencies: #())]. >> dir deleteAll >> >> Change Roassal with the name of the package you want to use to test. It will save the package, profile it, and then delete the temporary directory used. >> >> Thierry >> >> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >> Date d'envoi : samedi 14 dÃ©cembre 2013 16:10 >> Ã : Pharo Development List >> Objet : Re: [Pharo-dev] Tell me about your workflow >> >> >> On Dec 14, 2013, at 5:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >> >>> I used to do FileTree save and then git commands in a Terminal, and missed a few times : >>> - Multiple version saves overwriting each other... because I forgot the git commit >>> - Unability to explore the git history >>> >>> So, when I discussed with Dale, the author of FileTree, I saw the possibility to just add the git commands I needed on top of FileTree... the result is gitfiletree. >>> >>> Performance improvements... I'm wondering. From the profiling data I have, if I make writing 4x faster, I will only make a save 1.04x faster (with gitfiletree and Roassal). If to write less I have to compute a lot, do file reads and compares, md5 hashes, a diff... I'll probably replace a lot of writes by a lot of CPU time in Pharo and maybe be slower overall (not to mention more error prone). >>> >> >>> Would you be ready to run some profiling code on your set ? I can make a simple test case. I also wonder if writing less could make the git commit faster, in which case it could be valuable. >>> >> sure, send me the instructions >> >> >>> Also, if you want to try gitfiletree and your repository, what you can try is just browse your repository and browse versions of your packages (browse, not load: a browse will load your package code components but not compile the code). >>> >> >> ok, how should I install it? >> >>> (I noticed that the use of git archive makes gitfiletree slower at package read time, but, since this is dwarfed by the Pharo compilation time when loading such large packages, I don't care :)). >>> >>> Thierry >>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>> Date d'envoi : samedi 14 dÃ©cembre 2013 01:54 >>> Ã : Pharo Development List >>> Objet : Re: [Pharo-dev] Tell me about your workflow >>> >>> get it. >>> >>> In my workflow I don't do git operations from the image. >>> >>> I do those from the terminal itself in the server and using SourceTree on development >>> >>> As far as I know, the place that has most space for improvement is when filetree does the writes >>> >>> >>> >>> >>> >>> >>> >>> On Dec 13, 2013, at 6:28 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>> >>>> Hi Sebastian, >>>> >>>> sorry for the missing instructions... Had to board a train :) >>>> >>>> In fact, it's not an alternative to filetree, instead it is an extension of filetree (and integrated into filetree, but not completely yet: no real configuration support, no windows support). >>>> >>>> But yes, I should do a blog post somewhere about it :) >>>> >>>> Meanwhile, in the train, I tested on Roassal and I profiled the writes... >>>> >>>> Git is slow: on Roassal, >>>> Waiting for the git commit : 67% >>>> Writing the package to disk : 20% (writing the version file: 0.4%) >>>> -> No real cost associated with the metadata >>>> -> git is a lot more than I expected. >>>> When I remove git (i.e. pure filetree) >>>> Making a snapshot of Roassal: 28.9% >>>> basic Store version : 67% >>>> writeBasicDefinitions : 30% (of which half of it is reordering some stuff, not writing) >>>> writeMethodHolderDefinitions: 27,8% >>>> Of which writing to disk effectively is 19.7% >>>> >>>> Conclusion: gitfiletree will look slow because git is slow on such large commits :( And I don't see much gains to be made on the writing (i.e. a format change won't help much), but a lot to loose (code complexity, bugs). Unless a format change may make it faster for git somehow? >>>> >>>> I'll keep profiling, or give you the code to use to profile yourself ? >>>> >>>> Thierry >>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 16:56 >>>> Ã : Pharo Development List >>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>> >>>> so you are working on an alternative to filetree >>>> >>>> I'm pretty sure if you setup a page (or blog post) somewhere with clear and easy instructions to follow many people will try to use it >>>> >>>> and, if proven good and reliable, adopt it >>>> >>>> >>>> sebastian >>>> >>>> o/ >>>> >>>> >>>> >>>> >>>> >>>> On Dec 13, 2013, at 12:04 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>> >>>>> gitfiletree can be had this way (filetree is already in 3.0, gitfiletree is in the filetree configuration for Pharo 3.0 but is a bit hard to load). >>>>> >>>>> pharo/pharo pharo/Pharo.image confighttp://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/ ConfigurationOfOSProcess --install=stable >>>>> pharo/pharo pharo/Pharo.image eval --save Gofer new url:\'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main\'\; package: \'MonticelloFileTree-Git\'\; load >>>>> >>>>> Thierry >>>>> >>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 14:57 >>>>> Ã : Pharo Development List >>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>> >>>>> I can try a forced load on a 3.0 ignoring requisites for testing purposes >>>>> >>>>> but I'm using this: >>>>> https://github.com/dalehenrich/filetree >>>>> >>>>> I'm not sure what you're are using >>>>> >>>>> can you clarify? >>>>> >>>>> >>>>> >>>>> On Dec 13, 2013, at 11:43 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>> >>>>>> Ok. I'll try Roassal on a slow netbook to see. I don't see a factor of 10 difference between yours and Roassal, so I'll have a look. >>>>>> >>>>>> Thierry >>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 14:32 >>>>>> Ã : Pharo Development List >>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>> >>>>>> A bit. >>>>>> >>>>>> This is from today's current version (and is not all, it's only the two biggest packages): >>>>>> >>>>>> (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. >>>>>> (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. >>>>>> >>>>>> (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. >>>>>> (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>> >>>>>>> Roassal: 3493 >>>>>>> >>>>>>> Number of versions in the package history: 733. Size of the version file: 202796. >>>>>>> >>>>>>> Is that a lot lower than your count? >>>>>>> >>>>>>> Thierry >>>>>>> >>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 >>>>>>> Ã : Pharo Development List >>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>> >>>>>>> how many coreMethods? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>> >>>>>>>> Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. >>>>>>>> >>>>>>>> I'll do some profiling. >>>>>>>> >>>>>>>> Thierry >>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de GOUBIER Thierry >>>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 >>>>>>>> Ã : Pharo Development List >>>>>>>> Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow >>>>>>>> >>>>>>>> Thanks for the pointers. >>>>>>>> >>>>>>>> I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). >>>>>>>> >>>>>>>> Thierry >>>>>>>> >>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 >>>>>>>> Ã : Pharo Development List >>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>> >>>>>>>> So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. >>>>>>>> >>>>>>>> Uko >>>>>>>> >>>>>>>> On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: >>>>>>>> >>>>>>>>> Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) >>>>>>>>> >>>>>>>>> Uko >>>>>>>>> >>>>>>>>> On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>> >>>>>>>>>> I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). >>>>>>>>>> >>>>>>>>>> I'll keep in mind the idea of creating one randomly ;) >>>>>>>>>> >>>>>>>>>> Thierry >>>>>>>>>> >>>>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>>>>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 >>>>>>>>>> Ã : Pharo Development List >>>>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>>>> >>>>>>>>>> Are you interested in a package or a project? I can provide you information based on size, etcâ¦ >>>>>>>>>> >>>>>>>>>> Uko >>>>>>>>>> >>>>>>>>>> On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>>> >>>>>>>>>>> I gave up running gitfiletree on 1.4 :( >>>>>>>>>>> >>>>>>>>>>> It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. >>>>>>>>>>> >>>>>>>>>>> My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? >>>>>>>>>>> >>>>>>>>>>> Thierry >>>>>>>>>>> >>>>>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 >>>>>>>>>>> Ã : Pharo Development List >>>>>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>>>>> >>>>>>>>>>> gee the big code package is airflowing which I have, quite conservatively, running on #14438 images >>>>>>>>>>> >>>>>>>>>>> I load filetree like this: >>>>>>>>>>> >>>>>>>>>>> Gofer new >>>>>>>>>>> url: 'http://ss3.gemstone.com/ss/FileTree'; >>>>>>>>>>> package: 'ConfigurationOfFileTree'; >>>>>>>>>>> load. >>>>>>>>>>> ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. >>>>>>>>>>> >>>>>>>>>>> and it never complained >>>>>>>>>>> >>>>>>>>>>> let me know >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>>>> >>>>>>>>>>>> If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Thierry >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>>>>>>>> Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 >>>>>>>>>>>> Ã : Pharo Development List >>>>>>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>>>>>> >>>>>>>>>>>> ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. >>>>>>>>>>>> >>>>>>>>>>>> about 2, I don't know. I'm available to make tests and measure results >>>>>>>>>>>> >>>>>>>>>>>> have a nice trip, keep us tuned about any progress >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Yes, you're right in the general case. >>>>>>>>>>>>> >>>>>>>>>>>>> But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. >>>>>>>>>>>>> >>>>>>>>>>>>> If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- >>>>>>>>>>>>> >>>>>>>>>>>>> (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). >>>>>>>>>>>>> >>>>>>>>>>>>> Thierry >>>>>>>>>>>>> >>>>>>>>>>>>> Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : >>>>>>>>>>>>>> Without entering in details, a cause for slow package write is dumping >>>>>>>>>>>>>> all every time. >>>>>>>>>>>>>> >>>>>>>>>>>>>> For that strategy, we already have the image save which is magically fast. >>>>>>>>>>>>>> >>>>>>>>>>>>>> So, if we make something to scan the code and write only when it's >>>>>>>>>>>>>> different from what's on disk, then we would be preventing tons of >>>>>>>>>>>>>> redundant writes >>>>>>>>>>>>>> >>>>>>>>>>>>>> sebastian <https://about.me/sebastianconcept> >>>>>>>>>>>>>> >>>>>>>>>>>>>> o/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr >>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : >>>>>>>>>>>>>>>> ah, and IMHO the problem is not about reading... is about writing (if it >>>>>>>>>>>>>>>> has to write the metadata each time...). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> But, personnaly, I don't know if this is the reason for the lack of >>>>>>>>>>>>>>> performance... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have three hypothesis for Sebastian problem: >>>>>>>>>>>>>>> 1 - Slow read time for version metadata >>>>>>>>>>>>>>> - Confirmed because of the 16 seconds wait time for reading the >>>>>>>>>>>>>>> package metadata in the repository browser. >>>>>>>>>>>>>>> 2 - Slow metadata write >>>>>>>>>>>>>>> 3 - Slow package write >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have an implemented solution for 1-, a very easy to implement for >>>>>>>>>>>>>>> 2-, and none yet for 3- >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So I'd really like to check if 3- is confirmed ;) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thierry >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Esteban >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano >>>>>>>>>>>>>>>> <estebanlm(a)gmail.com <mailto:estebanlm@gmail.com> >>>>>>>>>>>>>>>> <mailto:estebanlm@gmail.com>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thierry, I know there is a working version... let me search... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> (5 mins later) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> here: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> https://github.com/rjsargent/CypressReferenceImplementation >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Dale says Richard made a metadata-less version. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> We should take a look at that. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Esteban >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry >>>>>>>>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Esteban, Sebastian, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> In the filetree code, you will find a format without metadata, >>>>>>>>>>>>>>>> but it's not in use anymore. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If you use gitfiletree, it will write the metadata for >>>>>>>>>>>>>>>> compatibility reasons with filetree, but it will never read it >>>>>>>>>>>>>>>> back. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'm pushing code to make filetree robust to absence of metadata, >>>>>>>>>>>>>>>> but I haven't worked on it for a while. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> gitfiletree has solved the problem of a slow metadata read. It >>>>>>>>>>>>>>>> does not solve any performance problem associated with >>>>>>>>>>>>>>>> writing, yet. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thierry >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I know there is a version of filetree without metadata (more >>>>>>>>>>>>>>>> compelling >>>>>>>>>>>>>>>> for projects that will never use other formats). >>>>>>>>>>>>>>>> Dale told me that there was a preview somewhere, but I >>>>>>>>>>>>>>>> didn't tested yet >>>>>>>>>>>>>>>> (lack of time) and now I cannot find the mail... >>>>>>>>>>>>>>>> Dale, can you re-send the link? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> cheers, >>>>>>>>>>>>>>>> Esteban >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre >>>>>>>>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I should breath before I type, but you probably already >>>>>>>>>>>>>>>> got that I >>>>>>>>>>>>>>>> meant /redundant writes/ (not reads)... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Anyway.. I was talking with Esteban and he mentions >>>>>>>>>>>>>>>> some kind of >>>>>>>>>>>>>>>> compatibility metadata. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If I'm going to give a leap of faith to filetree repos >>>>>>>>>>>>>>>> to save code >>>>>>>>>>>>>>>> why should I care about mcz compatibility? Paying a >>>>>>>>>>>>>>>> toll for no >>>>>>>>>>>>>>>> reason is evil. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Maybe we could make that optional so those who don't >>>>>>>>>>>>>>>> extract value >>>>>>>>>>>>>>>> from that feature can opt-out? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> sebastian <https://about.me/__sebastianconcept >>>>>>>>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> o/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Dec 11, 2013, at 12:44 PM, Sebastian Sastre >>>>>>>>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi Thierry >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Dec 11, 2013, at 12:43 PM, Goubier Thierry >>>>>>>>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr >>>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr>__>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I have packages (in the order of hundreds >>>>>>>>>>>>>>>> of classes) and save >>>>>>>>>>>>>>>> delays >>>>>>>>>>>>>>>> and package click delays are starting to >>>>>>>>>>>>>>>> demand patience in a >>>>>>>>>>>>>>>> way that >>>>>>>>>>>>>>>> doesn't feel like the right path >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Which operations ? I didn't remember noticing >>>>>>>>>>>>>>>> much with 179 >>>>>>>>>>>>>>>> classes on a laptop without a SSD. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> choose one. Just for clicking the package that will >>>>>>>>>>>>>>>> should you >>>>>>>>>>>>>>>> UUID, version and author I need to wait ~16 >>>>>>>>>>>>>>>> seconds. Sounds like a >>>>>>>>>>>>>>>> lot of overhead for reading a small .json file. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> But the write is the most worrisome >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> All that is with a SSD disk, otherwise save >>>>>>>>>>>>>>>> delays would be >>>>>>>>>>>>>>>> /way/ beyond >>>>>>>>>>>>>>>> unacceptable >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'd like to know more, and understand the >>>>>>>>>>>>>>>> reason, for sure. As >>>>>>>>>>>>>>>> far as I know, filetree will rewrite the whole >>>>>>>>>>>>>>>> package to disk >>>>>>>>>>>>>>>> everytime... and maybe optimising that could be >>>>>>>>>>>>>>>> the solution. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Well, that explains a lot. Writing all every time >>>>>>>>>>>>>>>> is the lazy >>>>>>>>>>>>>>>> thing that's okay for a prototype and temporary >>>>>>>>>>>>>>>> code in a proof of >>>>>>>>>>>>>>>> concept but that massive redundant reads certainly >>>>>>>>>>>>>>>> doesn't sounds >>>>>>>>>>>>>>>> like pro software. Specially for SSD's which has a >>>>>>>>>>>>>>>> limited >>>>>>>>>>>>>>>> quantity of writes >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thierry >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> sebastian >>>>>>>>>>>>>>>> <https://about.me/__sebastianconcept >>>>>>>>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> o/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>>>>> CEA list >>>>>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps >>>>>>>>>>>>>>>> RÃ©el EmbarquÃ©s >>>>>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>>>>> France >>>>>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> >>>>>>>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> >>>>>>>>>>>>>>>> / 83 95 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>>>>> CEA list >>>>>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>>>>> France >>>>>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>>>> CEA list >>>>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>>>> France >>>>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>> CEA list >>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>> France >>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 16, 2013

Re: [Pharo-dev] Tell me about your workflow

by GOUBIER Thierry

I'm happy with your test drive :) I see that with your largest test, you are at ~6000ms for writing overall in the profiler (basicStoreVersion). Can you drill down a bit in it to reach places where it says FileReference>>writeStream (or something similar); this is the place where the effective writing takes place. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] Date d'envoi : lundi 16 dÃ©cembre 2013 13:00 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow Okay, I'm impressed :D filetree performs quite better and gitfiletree in 3.0 really feels great my incentive to upgrade went up a lot [cid:3C68B6C0-4BC9-40D9-B183-75DA5EE514A0] On Dec 14, 2013, at 1:35 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: To install gitfiletree in 3.0: Install OSProcess from the configuration browser or 'do it' the following in a workspace Gofer new url: 'http://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/'; package: 'ConfigurationOfOSProcess'; load. ((Smalltalk at: #ConfigurationOfOSProcess) project version: #stable) load Gofer new url: 'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main'; package: 'MonticelloFileTree-Git'; load Then, in your Monticello browser, add repositories of type gitfiletree: in exactly the same way you would use filetree:. Beware: all save, copy, push and pull buttons on the GUI really do work and will call git on your behalf. If you only browse the repository, nothing will be committed or pushed. The code to profile the writing time is the following : | package dir mcR pV pVInfo | dir := 'temp' asFileReference. self assert: dir exists not. dir ensureCreateDirectory. self assert: dir isWritable. pV := MCWorkingCopy forPackage: (package := MCPackage named: 'Roassal'). pVInfo := pV ancestry ancestors first. mcR := MCFileTreeRepository new directory: dir. TimeProfiler spyAllOn: [mcR basicStoreVersion: (MCVersion new setPackage: package info: pVInfo snapshot: pV snapshot dependencies: #())]. dir deleteAll Change Roassal with the name of the package you want to use to test. It will save the package, profile it, and then delete the temporary directory used. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : samedi 14 dÃ©cembre 2013 16:10 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow On Dec 14, 2013, at 5:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I used to do FileTree save and then git commands in a Terminal, and missed a few times : - Multiple version saves overwriting each other... because I forgot the git commit - Unability to explore the git history So, when I discussed with Dale, the author of FileTree, I saw the possibility to just add the git commands I needed on top of FileTree... the result is gitfiletree. Performance improvements... I'm wondering. From the profiling data I have, if I make writing 4x faster, I will only make a save 1.04x faster (with gitfiletree and Roassal). If to write less I have to compute a lot, do file reads and compares, md5 hashes, a diff... I'll probably replace a lot of writes by a lot of CPU time in Pharo and maybe be slower overall (not to mention more error prone). Would you be ready to run some profiling code on your set ? I can make a simple test case. I also wonder if writing less could make the git commit faster, in which case it could be valuable. sure, send me the instructions Also, if you want to try gitfiletree and your repository, what you can try is just browse your repository and browse versions of your packages (browse, not load: a browse will load your package code components but not compile the code). ok, how should I install it? (I noticed that the use of git archive makes gitfiletree slower at package read time, but, since this is dwarfed by the Pharo compilation time when loading such large packages, I don't care :)). Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : samedi 14 dÃ©cembre 2013 01:54 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow get it. In my workflow I don't do git operations from the image. I do those from the terminal itself in the server and using SourceTree on development As far as I know, the place that has most space for improvement is when filetree does the writes On Dec 13, 2013, at 6:28 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Hi Sebastian, sorry for the missing instructions... Had to board a train :) In fact, it's not an alternative to filetree, instead it is an extension of filetree (and integrated into filetree, but not completely yet: no real configuration support, no windows support). But yes, I should do a blog post somewhere about it :) Meanwhile, in the train, I tested on Roassal and I profiled the writes... Git is slow: on Roassal, Waiting for the git commit : 67% Writing the package to disk : 20% (writing the version file: 0.4%) -> No real cost associated with the metadata -> git is a lot more than I expected. When I remove git (i.e. pure filetree) Making a snapshot of Roassal: 28.9% basic Store version : 67% writeBasicDefinitions : 30% (of which half of it is reordering some stuff, not writing) writeMethodHolderDefinitions: 27,8% Of which writing to disk effectively is 19.7% Conclusion: gitfiletree will look slow because git is slow on such large commits :( And I don't see much gains to be made on the writing (i.e. a format change won't help much), but a lot to loose (code complexity, bugs). Unless a format change may make it faster for git somehow? I'll keep profiling, or give you the code to use to profile yourself ? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 16:56 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow so you are working on an alternative to filetree I'm pretty sure if you setup a page (or blog post) somewhere with clear and easy instructions to follow many people will try to use it and, if proven good and reliable, adopt it sebastian<https://about.me/sebastianconcept> o/ On Dec 13, 2013, at 12:04 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: gitfiletree can be had this way (filetree is already in 3.0, gitfiletree is in the filetree configuration for Pharo 3.0 but is a bit hard to load). pharo/pharo pharo/Pharo.image confighttp://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/ ConfigurationOfOSProcess --install=stable pharo/pharo pharo/Pharo.image eval --save Gofer new url:\'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main\'\<http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main/'/>; package: \'MonticelloFileTree-Git\'\; load Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 14:57 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow I can try a forced load on a 3.0 ignoring requisites for testing purposes but I'm using this: https://github.com/dalehenrich/filetree I'm not sure what you're are using can you clarify? On Dec 13, 2013, at 11:43 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Ok. I'll try Roassal on a slow netbook to see. I don't see a factor of 10 difference between yours and Roassal, so I'll have a look. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 14:32 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow A bit. This is from today's current version (and is not all, it's only the two biggest packages): (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Roassal: 3493 Number of versions in the package history: 733. Size of the version file: 202796. Is that a lot lower than your count? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow how many coreMethods? On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. I'll do some profiling. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de GOUBIER Thierry Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 Ã : Pharo Development List Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow Thanks for the pointers. I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. Uko On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>> wrote: Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) Uko On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). I'll keep in mind the idea of creating one randomly ;) Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow Are you interested in a package or a project? I can provide you information based on size, etcâ¦ Uko On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I gave up running gitfiletree on 1.4 :( It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow gee the big code package is airflowing which I have, quite conservatively, running on #14438 images I load filetree like this: Gofer new url: 'http://ss3.gemstone.com/ss/FileTree'; package: 'ConfigurationOfFileTree'; load. ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. and it never complained let me know On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? Regards, Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. about 2, I don't know. I'm available to make tests and measure results have a nice trip, keep us tuned about any progress On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Yes, you're right in the general case. But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). Thierry Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : Without entering in details, a cause for slow package write is dumping all every time. For that strategy, we already have the image save which is magically fast. So, if we make something to scan the code and write only when it's different from what's on disk, then we would be preventing tons of redundant writes sebastian <https://about.me/sebastianconcept> o/ On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr>> wrote: Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : ah, and IMHO the problem is not about reading... is about writing (if it has to write the metadata each time...). But, personnaly, I don't know if this is the reason for the lack of performance... I have three hypothesis for Sebastian problem: 1 - Slow read time for version metadata - Confirmed because of the 16 seconds wait time for reading the package metadata in the repository browser. 2 - Slow metadata write 3 - Slow package write I have an implemented solution for 1-, a very easy to implement for 2-, and none yet for 3- So I'd really like to check if 3- is confirmed ;) Thierry Esteban On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano <estebanlm(a)gmail.com<mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com>> wrote: Thierry, I know there is a working version... let me search... (5 mins later) here: https://github.com/rjsargent/CypressReferenceImplementation Dale says Richard made a metadata-less version. We should take a look at that. Esteban On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: Esteban, Sebastian, In the filetree code, you will find a format without metadata, but it's not in use anymore. If you use gitfiletree, it will write the metadata for compatibility reasons with filetree, but it will never read it back. I'm pushing code to make filetree robust to absence of metadata, but I haven't worked on it for a while. gitfiletree has solved the problem of a slow metadata read. It does not solve any performance problem associated with writing, yet. Thierry Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : I know there is a version of filetree without metadata (more compelling for projects that will never use other formats). Dale told me that there was a preview somewhere, but I didn't tested yet (lack of time) and now I cannot find the mail... Dale, can you re-send the link? cheers, Esteban On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: I should breath before I type, but you probably already got that I meant /redundant writes/ (not reads)... Anyway.. I was talking with Esteban and he mentions some kind of compatibility metadata. If I'm going to give a leap of faith to filetree repos to save code why should I care about mcz compatibility? Paying a toll for no reason is evil. Maybe we could make that optional so those who don't extract value from that feature can opt-out? sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ On Dec 11, 2013, at 12:44 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: Hi Thierry On Dec 11, 2013, at 12:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr <mailto:thierry.goubier@cea.fr>__>> wrote: I have packages (in the order of hundreds of classes) and save delays and package click delays are starting to demand patience in a way that doesn't feel like the right path Which operations ? I didn't remember noticing much with 179 classes on a laptop without a SSD. choose one. Just for clicking the package that will should you UUID, version and author I need to wait ~16 seconds. Sounds like a lot of overhead for reading a small .json file. But the write is the most worrisome All that is with a SSD disk, otherwise save delays would be /way/ beyond unacceptable I'd like to know more, and understand the reason, for sure. As far as I know, filetree will rewrite the whole package to disk everytime... and maybe optimising that could be the solution. Well, that explains a lot. Writing all every time is the lazy thing that's okay for a prototype and temporary code in a proof of concept but that massive redundant reads certainly doesn't sounds like pro software. Specially for SSD's which has a limited quantity of writes Thierry sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 16, 2013

[pharo-project/pharo-core]

by GitHub

Branch: refs/tags/30647 Home: https://github.com/pharo-project/pharo-core

Dec. 16, 2013

[pharo-project/pharo-core] f4873d: 30647

by GitHub

Branch: refs/heads/3.0 Home: https://github.com/pharo-project/pharo-core Commit: f4873d006a2f1f63125a811e4e56d57e50c9e9c6 https://github.com/pharo-project/pharo-core/commit/f4873d006a2f1f63125a811e… Author: Jenkins Build Server <board(a)pharo-project.org> Date: 2013-12-16 (Mon, 16 Dec 2013) Changed paths: A OpalCompiler-Core.package/CCompilationContext.class/class/accessing/warningAllowed.st A OpalCompiler-Core.package/CCompilationContext.class/class/accessing/warningAllowed_.st M OpalCompiler-Core.package/CCompilationContext.class/definition.st A OpalCompiler-Core.package/CCompilationContext.class/instance/accessing/warningAllowed.st A OpalCompiler-Core.package/CompilationContext.class/class/accessing/warningAllowed.st A OpalCompiler-Core.package/CompilationContext.class/class/accessing/warningAllowed_.st M OpalCompiler-Core.package/CompilationContext.class/definition.st A OpalCompiler-Core.package/CompilationContext.class/instance/accessing/warningAllowed.st A OpalCompiler-Core.package/OCASTTranslator.class/class/initialize/initialize.st M OpalCompiler-Core.package/OCASTTranslator.class/definition.st M OpalCompiler-Core.package/OCASTTranslator.class/instance/visitor-double dispatching/visitMessageNode_.st M OpalCompiler-Core.package/OCSemanticWarning.class/instance/accessing/errorNotification.st M OpalCompiler-Core.package/OpalCompiler.class/class/options/defaultOptions.st M OpalCompiler-Core.package/OpalCompiler.class/instance/public access/compile.st A ScriptLoader30.package/ScriptLoader.class/instance/pharo - scripts/script300.st A ScriptLoader30.package/ScriptLoader.class/instance/pharo - updates/update30647.st M ScriptLoader30.package/ScriptLoader.class/instance/public/commentForCurrentUpdate.st M Settings-Compiler.package/CompilerSystemSettings.class/class/settings/compilerSettingsOn_.st Log Message: ----------- 30647 12366 Merge Opal Repo with image https://pharo.fogbugz.com/f/cases/12366 12166 Add Settings to turn off compiler warnings https://pharo.fogbugz.com/f/cases/12166 http://files.pharo.org/image/30/30647.zip

Dec. 16, 2013

Re: [Pharo-dev] Tell me about your workflow

by Sebastian Sastre

Okay, I'm impressed :D filetree performs quite better and gitfiletree in 3.0 really feels great my incentive to upgrade went up a lot On Dec 14, 2013, at 1:35 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > To install gitfiletree in 3.0: > > Install OSProcess from the configuration browser or 'do it' the following in a workspace > > Gofer new > url: 'http://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/'; > package: 'ConfigurationOfOSProcess'; > load. > ((Smalltalk at: #ConfigurationOfOSProcess) project version: #stable) load > > Gofer new > url: 'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main'; > package: 'MonticelloFileTree-Git'; > load > > Then, in your Monticello browser, add repositories of type gitfiletree: in exactly the same way you would use filetree:. Beware: all save, copy, push and pull buttons on the GUI really do work and will call git on your behalf. If you only browse the repository, nothing will be committed or pushed. > > The code to profile the writing time is the following : > > | package dir mcR pV pVInfo | > dir := 'temp' asFileReference. > self assert: dir exists not. > dir ensureCreateDirectory. > self assert: dir isWritable. > pV := MCWorkingCopy forPackage: (package := MCPackage named: 'Roassal'). > pVInfo := pV ancestry ancestors first. > mcR := MCFileTreeRepository new directory: dir. > TimeProfiler spyAllOn: [mcR > basicStoreVersion: > (MCVersion new > setPackage: package > info: pVInfo > snapshot: pV snapshot > dependencies: #())]. > dir deleteAll > > Change Roassal with the name of the package you want to use to test. It will save the package, profile it, and then delete the temporary directory used. > > Thierry > > De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] > Date d'envoi : samedi 14 dÃ©cembre 2013 16:10 > Ã : Pharo Development List > Objet : Re: [Pharo-dev] Tell me about your workflow > > > On Dec 14, 2013, at 5:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > >> I used to do FileTree save and then git commands in a Terminal, and missed a few times : >> - Multiple version saves overwriting each other... because I forgot the git commit >> - Unability to explore the git history >> >> So, when I discussed with Dale, the author of FileTree, I saw the possibility to just add the git commands I needed on top of FileTree... the result is gitfiletree. >> >> Performance improvements... I'm wondering. From the profiling data I have, if I make writing 4x faster, I will only make a save 1.04x faster (with gitfiletree and Roassal). If to write less I have to compute a lot, do file reads and compares, md5 hashes, a diff... I'll probably replace a lot of writes by a lot of CPU time in Pharo and maybe be slower overall (not to mention more error prone). >> > >> Would you be ready to run some profiling code on your set ? I can make a simple test case. I also wonder if writing less could make the git commit faster, in which case it could be valuable. >> > sure, send me the instructions > > >> Also, if you want to try gitfiletree and your repository, what you can try is just browse your repository and browse versions of your packages (browse, not load: a browse will load your package code components but not compile the code). >> > > ok, how should I install it? > >> (I noticed that the use of git archive makes gitfiletree slower at package read time, but, since this is dwarfed by the Pharo compilation time when loading such large packages, I don't care :)). >> >> Thierry >> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >> Date d'envoi : samedi 14 dÃ©cembre 2013 01:54 >> Ã : Pharo Development List >> Objet : Re: [Pharo-dev] Tell me about your workflow >> >> get it. >> >> In my workflow I don't do git operations from the image. >> >> I do those from the terminal itself in the server and using SourceTree on development >> >> As far as I know, the place that has most space for improvement is when filetree does the writes >> >> >> >> >> >> >> >> On Dec 13, 2013, at 6:28 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >> >>> Hi Sebastian, >>> >>> sorry for the missing instructions... Had to board a train :) >>> >>> In fact, it's not an alternative to filetree, instead it is an extension of filetree (and integrated into filetree, but not completely yet: no real configuration support, no windows support). >>> >>> But yes, I should do a blog post somewhere about it :) >>> >>> Meanwhile, in the train, I tested on Roassal and I profiled the writes... >>> >>> Git is slow: on Roassal, >>> Waiting for the git commit : 67% >>> Writing the package to disk : 20% (writing the version file: 0.4%) >>> -> No real cost associated with the metadata >>> -> git is a lot more than I expected. >>> When I remove git (i.e. pure filetree) >>> Making a snapshot of Roassal: 28.9% >>> basic Store version : 67% >>> writeBasicDefinitions : 30% (of which half of it is reordering some stuff, not writing) >>> writeMethodHolderDefinitions: 27,8% >>> Of which writing to disk effectively is 19.7% >>> >>> Conclusion: gitfiletree will look slow because git is slow on such large commits :( And I don't see much gains to be made on the writing (i.e. a format change won't help much), but a lot to loose (code complexity, bugs). Unless a format change may make it faster for git somehow? >>> >>> I'll keep profiling, or give you the code to use to profile yourself ? >>> >>> Thierry >>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>> Date d'envoi : vendredi 13 dÃ©cembre 2013 16:56 >>> Ã : Pharo Development List >>> Objet : Re: [Pharo-dev] Tell me about your workflow >>> >>> so you are working on an alternative to filetree >>> >>> I'm pretty sure if you setup a page (or blog post) somewhere with clear and easy instructions to follow many people will try to use it >>> >>> and, if proven good and reliable, adopt it >>> >>> >>> sebastian >>> >>> o/ >>> >>> >>> >>> >>> >>> On Dec 13, 2013, at 12:04 PM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>> >>>> gitfiletree can be had this way (filetree is already in 3.0, gitfiletree is in the filetree configuration for Pharo 3.0 but is a bit hard to load). >>>> >>>> pharo/pharo pharo/Pharo.image confighttp://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/ ConfigurationOfOSProcess --install=stable >>>> pharo/pharo pharo/Pharo.image eval --save Gofer new url:\'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main\'\; package: \'MonticelloFileTree-Git\'\; load >>>> >>>> Thierry >>>> >>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 14:57 >>>> Ã : Pharo Development List >>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>> >>>> I can try a forced load on a 3.0 ignoring requisites for testing purposes >>>> >>>> but I'm using this: >>>> https://github.com/dalehenrich/filetree >>>> >>>> I'm not sure what you're are using >>>> >>>> can you clarify? >>>> >>>> >>>> >>>> On Dec 13, 2013, at 11:43 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>> >>>>> Ok. I'll try Roassal on a slow netbook to see. I don't see a factor of 10 difference between yours and Roassal, so I'll have a look. >>>>> >>>>> Thierry >>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 14:32 >>>>> Ã : Pharo Development List >>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>> >>>>> A bit. >>>>> >>>>> This is from today's current version (and is not all, it's only the two biggest packages): >>>>> >>>>> (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. >>>>> (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. >>>>> >>>>> (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. >>>>> (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>> >>>>>> Roassal: 3493 >>>>>> >>>>>> Number of versions in the package history: 733. Size of the version file: 202796. >>>>>> >>>>>> Is that a lot lower than your count? >>>>>> >>>>>> Thierry >>>>>> >>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>> Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 >>>>>> Ã : Pharo Development List >>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>> >>>>>> how many coreMethods? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>> >>>>>>> Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. >>>>>>> >>>>>>> I'll do some profiling. >>>>>>> >>>>>>> Thierry >>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de GOUBIER Thierry >>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 >>>>>>> Ã : Pharo Development List >>>>>>> Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow >>>>>>> >>>>>>> Thanks for the pointers. >>>>>>> >>>>>>> I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). >>>>>>> >>>>>>> Thierry >>>>>>> >>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 >>>>>>> Ã : Pharo Development List >>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>> >>>>>>> So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. >>>>>>> >>>>>>> Uko >>>>>>> >>>>>>> On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: >>>>>>> >>>>>>>> Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) >>>>>>>> >>>>>>>> Uko >>>>>>>> >>>>>>>> On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>> >>>>>>>>> I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). >>>>>>>>> >>>>>>>>> I'll keep in mind the idea of creating one randomly ;) >>>>>>>>> >>>>>>>>> Thierry >>>>>>>>> >>>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>>>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 >>>>>>>>> Ã : Pharo Development List >>>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>>> >>>>>>>>> Are you interested in a package or a project? I can provide you information based on size, etcâ¦ >>>>>>>>> >>>>>>>>> Uko >>>>>>>>> >>>>>>>>> On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>> >>>>>>>>>> I gave up running gitfiletree on 1.4 :( >>>>>>>>>> >>>>>>>>>> It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. >>>>>>>>>> >>>>>>>>>> My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? >>>>>>>>>> >>>>>>>>>> Thierry >>>>>>>>>> >>>>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 >>>>>>>>>> Ã : Pharo Development List >>>>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>>>> >>>>>>>>>> gee the big code package is airflowing which I have, quite conservatively, running on #14438 images >>>>>>>>>> >>>>>>>>>> I load filetree like this: >>>>>>>>>> >>>>>>>>>> Gofer new >>>>>>>>>> url: 'http://ss3.gemstone.com/ss/FileTree'; >>>>>>>>>> package: 'ConfigurationOfFileTree'; >>>>>>>>>> load. >>>>>>>>>> ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. >>>>>>>>>> >>>>>>>>>> and it never complained >>>>>>>>>> >>>>>>>>>> let me know >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>>> >>>>>>>>>>> If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> >>>>>>>>>>> Thierry >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>>>>>>> Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 >>>>>>>>>>> Ã : Pharo Development List >>>>>>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>>>>>> >>>>>>>>>>> ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. >>>>>>>>>>> >>>>>>>>>>> about 2, I don't know. I'm available to make tests and measure results >>>>>>>>>>> >>>>>>>>>>> have a nice trip, keep us tuned about any progress >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>>>>>> >>>>>>>>>>>> Yes, you're right in the general case. >>>>>>>>>>>> >>>>>>>>>>>> But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. >>>>>>>>>>>> >>>>>>>>>>>> If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- >>>>>>>>>>>> >>>>>>>>>>>> (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). >>>>>>>>>>>> >>>>>>>>>>>> Thierry >>>>>>>>>>>> >>>>>>>>>>>> Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : >>>>>>>>>>>>> Without entering in details, a cause for slow package write is dumping >>>>>>>>>>>>> all every time. >>>>>>>>>>>>> >>>>>>>>>>>>> For that strategy, we already have the image save which is magically fast. >>>>>>>>>>>>> >>>>>>>>>>>>> So, if we make something to scan the code and write only when it's >>>>>>>>>>>>> different from what's on disk, then we would be preventing tons of >>>>>>>>>>>>> redundant writes >>>>>>>>>>>>> >>>>>>>>>>>>> sebastian <https://about.me/sebastianconcept> >>>>>>>>>>>>> >>>>>>>>>>>>> o/ >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr >>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : >>>>>>>>>>>>>>> ah, and IMHO the problem is not about reading... is about writing (if it >>>>>>>>>>>>>>> has to write the metadata each time...). >>>>>>>>>>>>>> >>>>>>>>>>>>>> But, personnaly, I don't know if this is the reason for the lack of >>>>>>>>>>>>>> performance... >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have three hypothesis for Sebastian problem: >>>>>>>>>>>>>> 1 - Slow read time for version metadata >>>>>>>>>>>>>> - Confirmed because of the 16 seconds wait time for reading the >>>>>>>>>>>>>> package metadata in the repository browser. >>>>>>>>>>>>>> 2 - Slow metadata write >>>>>>>>>>>>>> 3 - Slow package write >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have an implemented solution for 1-, a very easy to implement for >>>>>>>>>>>>>> 2-, and none yet for 3- >>>>>>>>>>>>>> >>>>>>>>>>>>>> So I'd really like to check if 3- is confirmed ;) >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thierry >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Esteban >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano >>>>>>>>>>>>>>> <estebanlm(a)gmail.com <mailto:estebanlm@gmail.com> >>>>>>>>>>>>>>> <mailto:estebanlm@gmail.com>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thierry, I know there is a working version... let me search... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> (5 mins later) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> here: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> https://github.com/rjsargent/CypressReferenceImplementation >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Dale says Richard made a metadata-less version. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> We should take a look at that. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Esteban >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry >>>>>>>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Esteban, Sebastian, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> In the filetree code, you will find a format without metadata, >>>>>>>>>>>>>>> but it's not in use anymore. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If you use gitfiletree, it will write the metadata for >>>>>>>>>>>>>>> compatibility reasons with filetree, but it will never read it >>>>>>>>>>>>>>> back. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm pushing code to make filetree robust to absence of metadata, >>>>>>>>>>>>>>> but I haven't worked on it for a while. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> gitfiletree has solved the problem of a slow metadata read. It >>>>>>>>>>>>>>> does not solve any performance problem associated with >>>>>>>>>>>>>>> writing, yet. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thierry >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I know there is a version of filetree without metadata (more >>>>>>>>>>>>>>> compelling >>>>>>>>>>>>>>> for projects that will never use other formats). >>>>>>>>>>>>>>> Dale told me that there was a preview somewhere, but I >>>>>>>>>>>>>>> didn't tested yet >>>>>>>>>>>>>>> (lack of time) and now I cannot find the mail... >>>>>>>>>>>>>>> Dale, can you re-send the link? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> cheers, >>>>>>>>>>>>>>> Esteban >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre >>>>>>>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I should breath before I type, but you probably already >>>>>>>>>>>>>>> got that I >>>>>>>>>>>>>>> meant /redundant writes/ (not reads)... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Anyway.. I was talking with Esteban and he mentions >>>>>>>>>>>>>>> some kind of >>>>>>>>>>>>>>> compatibility metadata. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If I'm going to give a leap of faith to filetree repos >>>>>>>>>>>>>>> to save code >>>>>>>>>>>>>>> why should I care about mcz compatibility? Paying a >>>>>>>>>>>>>>> toll for no >>>>>>>>>>>>>>> reason is evil. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Maybe we could make that optional so those who don't >>>>>>>>>>>>>>> extract value >>>>>>>>>>>>>>> from that feature can opt-out? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> sebastian <https://about.me/__sebastianconcept >>>>>>>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> o/ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Dec 11, 2013, at 12:44 PM, Sebastian Sastre >>>>>>>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Thierry >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Dec 11, 2013, at 12:43 PM, Goubier Thierry >>>>>>>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr >>>>>>>>>>>>>>> <mailto:thierry.goubier@cea.fr>__>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have packages (in the order of hundreds >>>>>>>>>>>>>>> of classes) and save >>>>>>>>>>>>>>> delays >>>>>>>>>>>>>>> and package click delays are starting to >>>>>>>>>>>>>>> demand patience in a >>>>>>>>>>>>>>> way that >>>>>>>>>>>>>>> doesn't feel like the right path >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Which operations ? I didn't remember noticing >>>>>>>>>>>>>>> much with 179 >>>>>>>>>>>>>>> classes on a laptop without a SSD. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> choose one. Just for clicking the package that will >>>>>>>>>>>>>>> should you >>>>>>>>>>>>>>> UUID, version and author I need to wait ~16 >>>>>>>>>>>>>>> seconds. Sounds like a >>>>>>>>>>>>>>> lot of overhead for reading a small .json file. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> But the write is the most worrisome >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> All that is with a SSD disk, otherwise save >>>>>>>>>>>>>>> delays would be >>>>>>>>>>>>>>> /way/ beyond >>>>>>>>>>>>>>> unacceptable >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'd like to know more, and understand the >>>>>>>>>>>>>>> reason, for sure. As >>>>>>>>>>>>>>> far as I know, filetree will rewrite the whole >>>>>>>>>>>>>>> package to disk >>>>>>>>>>>>>>> everytime... and maybe optimising that could be >>>>>>>>>>>>>>> the solution. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Well, that explains a lot. Writing all every time >>>>>>>>>>>>>>> is the lazy >>>>>>>>>>>>>>> thing that's okay for a prototype and temporary >>>>>>>>>>>>>>> code in a proof of >>>>>>>>>>>>>>> concept but that massive redundant reads certainly >>>>>>>>>>>>>>> doesn't sounds >>>>>>>>>>>>>>> like pro software. Specially for SSD's which has a >>>>>>>>>>>>>>> limited >>>>>>>>>>>>>>> quantity of writes >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thierry >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> sebastian >>>>>>>>>>>>>>> <https://about.me/__sebastianconcept >>>>>>>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> o/ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>>>> CEA list >>>>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps >>>>>>>>>>>>>>> RÃ©el EmbarquÃ©s >>>>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>>>> France >>>>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> >>>>>>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> >>>>>>>>>>>>>>> / 83 95 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>>>> CEA list >>>>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>>>> France >>>>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>>>> CEA list >>>>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>>>> France >>>>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Thierry Goubier >>>>>>>>>>>> CEA list >>>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>>> France >>>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 16, 2013

Re: [Pharo-dev] Nautilus as default/only Systembrowser for pharo3

by Marcus Denker

On 16 Dec 2013, at 12:53, Nicolai Hess <nicolaihess(a)web.de> wrote: > Hi, > > is Nautilus supposed to be the default or only Systembrowser for > the next Pharo release? > Default. The release will just be what you download now plus fixes that people do from now till March. The old Browser will still be in there as we do not have the manpower to remove it (there is a subclass that needs to be re-implemented), but it starts to degenerate as it is not usedâ¦ as it always happens. (and we do not want to put manpower there, it is better spend on Nautilus) Marcus

Dec. 16, 2013

Nautilus as default/only Systembrowser for pharo3

by Nicolai Hess

Hi, is Nautilus supposed to be the default or only Systembrowser for the next Pharo release? Nicolai

Dec. 16, 2013

Re: [Pharo-dev] Sprint friday :)

by StÃ©phane Ducasse

super! On Dec 16, 2013, at 10:58 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > Hi StÃ©phane, > > I'm coming as well. > > Thierry > ________________________________________ > De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de StÃ©phane Ducasse [stephane.ducasse(a)inria.fr] > Date d'envoi : dimanche 15 dÃ©cembre 2013 17:59 > Ã : Pharo Development List > Objet : [Pharo-dev] Sprint friday :) > > Hi Pharoers > > we will have an official sprint friday and we have the following visitors > - andrei chis, jan kurs from Berne > - alain plantec from Brest > - serge stinckwich from Caen > - yuriy timchuk, roberto minelli and tommaso dal sasso from Lugano > - Pharoers from Douai > > So if you plan to attend you are welcomed. Just drop a mail. > > Stef > >

Dec. 16, 2013

Re: [Pharo-dev] Sprint friday :)

by phil＠highoctane.be

So do I. Phil On Monday, December 16, 2013, GOUBIER Thierry wrote: > Hi StÃ©phane, > > I'm coming as well. > > Thierry > ________________________________________ > De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org <javascript:;>] de la > part de StÃ©phane Ducasse [stephane.ducasse(a)inria.fr <javascript:;>] > Date d'envoi : dimanche 15 dÃ©cembre 2013 17:59 > Ã : Pharo Development List > Objet : [Pharo-dev] Sprint friday :) > > Hi Pharoers > > we will have an official sprint friday and we have the following visitors > - andrei chis, jan kurs from Berne > - alain plantec from Brest > - serge stinckwich from Caen > - yuriy timchuk, roberto minelli and tommaso dal sasso from Lugano > - Pharoers from Douai > > So if you plan to attend you are welcomed. Just drop a mail. > > Stef > > > -- --- Philippe Back Dramatic Performance Improvements Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 Mail:phil@highoctane.be | Web: http://philippeback.eu Blog: http://philippeback.be | Twitter: @philippeback Youtube: http://www.youtube.com/user/philippeback/videos High Octane SPRL rue cour Boisacq 101 | 1301 Bierges | Belgium Pharo Consortium Member - http://consortium.pharo.org/ Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller

Dec. 16, 2013

[pharo-project/pharo-core] 0b586f: 30646

by GitHub

Branch: refs/heads/3.0 Home: https://github.com/pharo-project/pharo-core Commit: 0b586f51fdd2c540efca45e6e80b11cb1c04aefe https://github.com/pharo-project/pharo-core/commit/0b586f51fdd2c540efca45e6… Author: Jenkins Build Server <board(a)pharo-project.org> Date: 2013-12-16 (Mon, 16 Dec 2013) Changed paths: M FileSystem-Core.package/FileSystemDirectoryEntry.class/instance/printing/printOn_.st M FileSystem-Disk.package/DiskStore.class/instance/public/isReadable_.st M FileSystem-Disk.package/DiskStore.class/instance/public/isWritable_.st M Files.package/PharoFilesOpener.class/instance/open sources/openSources_forImage_.st M Kernel.package/NumberParser.class/class/instance creation/squeezeNumberOutOfString_onError_.st M Kernel.package/Object.class/instance/nil testing/ifNil_ifNotNilDo_.st M Kernel.package/Object.class/instance/nil testing/ifNotNilDo_.st M Kernel.package/Object.class/instance/nil testing/ifNotNilDo_ifNil_.st M Kernel.package/UndefinedObject.class/instance/testing/ifNil_ifNotNilDo_.st M Kernel.package/UndefinedObject.class/instance/testing/ifNotNilDo_.st M Kernel.package/UndefinedObject.class/instance/testing/ifNotNilDo_ifNil_.st M Morphic-Base.package/HaloMorph.class/instance/events/popUpFor_event_.st M Morphic-Base.package/PluggableTextMorph.class/instance/menu commands/yellowButtonActivity_.st M Morphic-Base.package/ScrollPane.class/instance/scroll bar events/yellowButtonActivity_.st M Morphic-Base.package/TextMorph.class/instance/as yet unclassified /yellowButtonActivity_.st M Morphic-Core.package/Morph.class/instance/menu/hasYellowButtonMenu.st M NECompletion.package/NECContext.class/instance/accessing/createModel.st M NOCompletion.package/NOCModel.class/instance/accessing/narrowWith_.st M NautilusRefactoring.package/NautilusRefactoring.class/class/menu/sourceCodeRefactoringMenuHolder_.st M NautilusRefactoring.package/NautilusRefactoring.class/class/menu/sourceCodeRefactoringMenu_.st M OpalCompiler-Core.package/OCRequestorScope.class/instance/lookup/lookupVar_.st M OpalCompiler-Core.package/extension/RBMessageNode/instance/isInlineIfNil.st R OpalCompiler-Tests.package/OCASTCheckerTest.class/instance/testing - simple/testExampleIfNotNilDo.st R OpalCompiler-Tests.package/OCASTCheckerTest.class/instance/testing - simple/testExampleIfNotNilDoReturnNil.st R OpalCompiler-Tests.package/OCASTTranslatorTest.class/instance/testing - blocks/testExampleIfNotNilDo.st R OpalCompiler-Tests.package/OCASTTranslatorTest.class/instance/testing - blocks/testExampleIfNotNilDoReturnNil.st R OpalCompiler-Tests.package/OCBytecodeDecompilerExamplesTest.class/instance/tests-blocks-optimized/testExampleIfNotNillDo.st R OpalCompiler-Tests.package/OCBytecodeDecompilerExamplesTest.class/instance/tests-blocks-optimized/testExampleIfNotNillDoReturnNil.st R OpalCompiler-Tests.package/OCOpalExamples.class/instance/examples-blocks-optimized/exampleIfNotNilDo.st R OpalCompiler-Tests.package/OCOpalExamples.class/instance/examples-blocks-optimized/exampleIfNotNilDoReturnNil.st M Polymorph-Tools-Diff.package/PSMCPatchMorph.class/instance/as yet unclassified/selectionHasAcutalClass.st M Polymorph-Widgets.package/extension/SystemWindow/instance/modalUnlockFrom_.st M Refactoring-Critics.package/RBMissingSuperSendsRule.class/instance/running/checkMethod_.st M Ring-Monticello.package/extension/RGMethodDefinition/instance/basicAsMCMethodDefinition.st A ScriptLoader30.package/ScriptLoader.class/instance/pharo - scripts/script299.st A ScriptLoader30.package/ScriptLoader.class/instance/pharo - updates/update30646.st M ScriptLoader30.package/ScriptLoader.class/instance/public/commentForCurrentUpdate.st M Shout.package/SHTextStylerST80.class/instance/private/privateStyle_.st M Shout.package/SHTextStylerST80.class/instance/private/setAttributesIn_fromRanges_.st M Spec-Inspector.package/EyeAbstractInspector.class/instance/accessing/selectedElementDo_.st M System-CommandLine.package/EvaluateCommandLineHandler.class/instance/activation/evaluateStdIn.st M Tools.package/FileList.class/instance/accessing/reference_.st M Tools.package/SystemReporter.class/instance/reporting/reportVM_.st M Tools.package/Workspace.class/instance/file support/suggestedFileName.st M UIManager.package/ErrorNonInteractive.class/instance/accessing/description.st Log Message: ----------- 30646 12320 ifNotNilDo: --> ifNotNil: https://pharo.fogbugz.com/f/cases/12320 http://files.pharo.org/image/30/30646.zip

Dec. 16, 2013