December 2013 - Pharo-dev - lists.pharo.org

Re: [Pharo-dev] The Moldable Debugger - screencasts

by Andrei Chis

Thanks for spotting this problem. I renamed a few classes recently. Should be GTGenericStackDebugger instead of GTDebugger The following script should work: Gofer new url: 'http://www.smalltalkhub.com/mc/Moose/GToolkit/main'; configuration; load. (Smalltalk globals at: #ConfigurationOfGToolkit) loadDevelopment. (Smalltalk globals at: #GTInspector) registerToolsOn: Smalltalk tools. (Smalltalk globals at: #GTGenericStackDebugger) registerToolsOn: Smalltalk tools. (Smalltalk globals at: #GTGenericStackDebugger) registerExtraToolsOn: Smalltalk tools. (Smalltalk globals at: #GTSUnitDebugger) registerToolsOn: Smalltalk tools. On Tue, Dec 31, 2013 at 8:19 PM, Mark Bestley <st(a)bestley.co.uk> wrote: > How does it load in Pharo 3? > > As far as I can see the instructions are > Gofer new > url: 'http://www.smalltalkhub.com/mc/Moose/GToolkit/main'; > configuration; > load. > (Smalltalk globals at: #ConfigurationOfGToolkit) loadDevelopment. > (Smalltalk globals at: #GTInspector) registerToolsOn: Smalltalk tools. > (Smalltalk globals at: #GTDebugger) registerToolsOn: Smalltalk tools. > (Smalltalk globals at: #GTDebugger) registerExtraToolsOn: Smalltalk tools. > (Smalltalk globals at: #GTSUnitDebugger) registerToolsOn: Smalltalk tools. > > > But this fails with #GTDebugger not found in SystemDirectory > > Thanks > > > On 31/12/2013 18:01, Tudor Girba wrote: > >> This only works in Pharo 3.0. >> >> Doru >> >> >> On Tue, Dec 31, 2013 at 6:57 PM, HernÃ¡n Morales Durand >> <hernan.morales(a)gmail.com >> <mailto:hernan.morales@gmail.com>> wrote: >> >> Really impressive and useful. >> Thanks for sharing. >> >> Can you point how to install it in a common Pharo 2.0 image? >> >> HernÃ¡n >> >> >> >> 2013/12/31 Andrei Chis >> <chisvasileandrei(a)gmail.com >> <mailto:chisvasileandrei@gmail.com>> >> >> >> Hi, >> >> I made two new screencasts showing a small domain-specific >> debugger for SUnit and one for PetitParser. >> >> https://vimeo.com/83017763 - SUnit >> https://vimeo.com/83017762 - PetitParser >> >> There is also an older one for announcements >> (https://vimeo.com/83020584) >> >> The debuggers were created using the GTDebugger a.k.a. the >> "moldable debugger" framework >> <http://scg.unibe.ch/research/moldabledebugger> >> >> Cheers, >> Andrei >> >> >> >> >> >> -- >> www.tudorgirba.com <http://www.tudorgirba.com> >> >> >> "Every thing has its own flow" >> > > > -- > Mark > > >

Dec. 31, 2013

Best wishes for 2014

by StÃ©phane Ducasse

Hi pharoers Sometimes I think that we are crazy to build this system but this is really important to have dreams and make them becoming true. :) I really like what we are doing: we are building a strong community and a really great system. Of course it could be better but it is going in the right direction at full speed. Now remember that Pharo is not ours but YOURS and you can get an impact! Pharo is not read-only. This year we got some nice and important changes. I think that in 2014 we will have some important improvements. We will have to finish what we started and build a solid ground for the next iteration. I really like our community because it pushes me forward and because my dreams are becoming reality :) I wish you a lot of success and health. Stef

Dec. 31, 2013

Re: [Pharo-dev] The Moldable Debugger - screencasts

by kilon alios

I really like the idea of having debugger adjust to the workflow of the coder, I think the same should apply to Browser too, though AFAIK already Nautilus is very flexible. Congratulations on the videos by the way, they really show the potential of the debugger. I think , and correct me if that is already available, what would be a good idea is a preset system where you could choose between diffirent debugger setups. So a preset for "pettitparser"another for "roassal" etc that means less menus and no need to have separate debuggers :) On Tue, Dec 31, 2013 at 8:01 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote: > This only works in Pharo 3.0. > > Doru > > > On Tue, Dec 31, 2013 at 6:57 PM, HernÃ¡n Morales Durand < > hernan.morales(a)gmail.com> wrote: > >> Really impressive and useful. >> Thanks for sharing. >> >> Can you point how to install it in a common Pharo 2.0 image? >> >> HernÃ¡n >> >> >> >> 2013/12/31 Andrei Chis <chisvasileandrei(a)gmail.com> >> >>> Hi, >>> >>> I made two new screencasts showing a small domain-specific debugger for >>> SUnit and one for PetitParser. >>> >>> https://vimeo.com/83017763 - SUnit >>> https://vimeo.com/83017762 - PetitParser >>> >>> There is also an older one for announcements (https://vimeo.com/83020584 >>> ). >>> >>> The debuggers were created using the GTDebugger a.k.a. the "moldable >>> debugger" framework <http://scg.unibe.ch/research/moldabledebugger> >>> >>> Cheers, >>> Andrei >>> >> >> > > > -- > www.tudorgirba.com > > "Every thing has its own flow" >

Dec. 31, 2013

Re: [Pharo-dev] The Moldable Debugger - screencasts

by Mark Bestley

How does it load in Pharo 3? As far as I can see the instructions are Gofer new url: 'http://www.smalltalkhub.com/mc/Moose/GToolkit/main'; configuration; load. (Smalltalk globals at: #ConfigurationOfGToolkit) loadDevelopment. (Smalltalk globals at: #GTInspector) registerToolsOn: Smalltalk tools. (Smalltalk globals at: #GTDebugger) registerToolsOn: Smalltalk tools. (Smalltalk globals at: #GTDebugger) registerExtraToolsOn: Smalltalk tools. (Smalltalk globals at: #GTSUnitDebugger) registerToolsOn: Smalltalk tools. But this fails with #GTDebugger not found in SystemDirectory Thanks On 31/12/2013 18:01, Tudor Girba wrote: > This only works in Pharo 3.0. > > Doru > > > On Tue, Dec 31, 2013 at 6:57 PM, HernÃ¡n Morales Durand > <hernan.morales(a)gmail.com > <mailto:hernan.morales@gmail.com>> wrote: > > Really impressive and useful. > Thanks for sharing. > > Can you point how to install it in a common Pharo 2.0 image? > > HernÃ¡n > > > > 2013/12/31 Andrei Chis > <chisvasileandrei(a)gmail.com > <mailto:chisvasileandrei@gmail.com>> > > Hi, > > I made two new screencasts showing a small domain-specific > debugger for SUnit and one for PetitParser. > > https://vimeo.com/83017763 - SUnit > https://vimeo.com/83017762 - PetitParser > > There is also an older one for announcements > (https://vimeo.com/83020584) > > The debuggers were created using the GTDebugger a.k.a. the > "moldable debugger" framework > <http://scg.unibe.ch/research/moldabledebugger> > > Cheers, > Andrei > > > > > > -- > www.tudorgirba.com <http://www.tudorgirba.com> > > "Every thing has its own flow" -- Mark

Dec. 31, 2013

Re: [Pharo-dev] The Moldable Debugger - screencasts

by Tudor Girba

This only works in Pharo 3.0. Doru On Tue, Dec 31, 2013 at 6:57 PM, HernÃ¡n Morales Durand < hernan.morales(a)gmail.com> wrote: > Really impressive and useful. > Thanks for sharing. > > Can you point how to install it in a common Pharo 2.0 image? > > HernÃ¡n > > > > 2013/12/31 Andrei Chis <chisvasileandrei(a)gmail.com> > >> Hi, >> >> I made two new screencasts showing a small domain-specific debugger for >> SUnit and one for PetitParser. >> >> https://vimeo.com/83017763 - SUnit >> https://vimeo.com/83017762 - PetitParser >> >> There is also an older one for announcements (https://vimeo.com/83020584 >> ). >> >> The debuggers were created using the GTDebugger a.k.a. the "moldable >> debugger" framework <http://scg.unibe.ch/research/moldabledebugger> >> >> Cheers, >> Andrei >> > > -- www.tudorgirba.com "Every thing has its own flow"

Dec. 31, 2013

Re: [Pharo-dev] The Moldable Debugger - screencasts

by HernÃ¡n Morales Durand

Really impressive and useful. Thanks for sharing. Can you point how to install it in a common Pharo 2.0 image? HernÃ¡n 2013/12/31 Andrei Chis <chisvasileandrei(a)gmail.com> > Hi, > > I made two new screencasts showing a small domain-specific debugger for > SUnit and one for PetitParser. > > https://vimeo.com/83017763 - SUnit > https://vimeo.com/83017762 - PetitParser > > There is also an older one for announcements (https://vimeo.com/83020584) > > The debuggers were created using the GTDebugger a.k.a. the "moldable > debugger" framework <http://scg.unibe.ch/research/moldabledebugger> > > Cheers, > Andrei >

Dec. 31, 2013

Re: [Pharo-dev] towards moose in the pharo ide (gtinspector / gtdebugger)

by NISHIHARA Satoshi

just Nautilus with 3 plugins. Nautilus pluginClasses: {{FinderPlugin. #top}. {AnnotationFieldPlugin. #middle}. {PackageTasksPlugin. #bottom}} asOrderedCollection PackageTasksPlugin: patched AnnotationFieldPlugin: my work FinderPlugin: as is 2013/12/31 Alexandre Bergel <alexandre.bergel(a)me.com>: > Hey! > What is the browser you are using? > Looks really cool! > > Alexandre > > > On Dec 31, 2013, at 10:55 AM, NISHIHARA Satoshi <goonsh(a)gmail.com> wrote: > >> now, i am trying to use it for personal experimental project. >> >> >> 2013/12/31 Tudor Girba <tudor(a)tudorgirba.com>: >>> Thank you, Alex. >>> >>> Doru >>> >>> >>> On Mon, Dec 30, 2013 at 11:40 PM, Alexandre Bergel <alexandre.bergel(a)me.com> >>> wrote: >>>> >>>> I am quasi exclusively using the Moose image, which includes GTDebugger >>>> and GTInspector. >>>> These are two great tools. I use the standard Pharo 3.0 for particular >>>> needs only. When I do this, it is like using Nautilus and coming back to OB >>>> (or even the old standard browser). >>>> >>>> GTDebugger and GTInspector are great. I like them. >>>> >>>> Alexandre >>>> >>>> >>>> On Dec 30, 2013, at 2:24 AM, Tudor Girba <tudor(a)tudorgirba.com> wrote: >>>> >>>>> Hi, >>>>> >>>>> Some of you asked how the GTInspector and GTDebugger are different from >>>>> the existing infrastructure. They are quite different from the norm in that: >>>>> they are tiny, and they are highly extensible. Here are some posts that >>>>> describe what makes them different: >>>>> >>>>> >>>>> http://www.humane-assessment.com/blog/the-moldable-gtinspector-deconstructe… >>>>> http://www.humane-assessment.com/blog/dissecting-the-gtinspector/ >>>>> >>>>> http://www.humane-assessment.com/blog/extending-variables-shown-in-gtinspec… >>>>> http://www.humane-assessment.com/blog/moldable-gtdebugger >>>>> >>>>> These tools are already the default development tools in the Moose >>>>> image. As you can see, Moose is reshaping the Pharo IDE. I think this is >>>>> exciting. >>>>> >>>>> This should be just the beginning. To make it better, we need your >>>>> energy: >>>>> - Apply and extend these tools for your context (this is what makes them >>>>> unique). >>>>> - Tell us what works and what does not work. >>>>> - Ideally, start working with us on this topic. In particular, I am >>>>> looking for people that would like to spend some time working on Morphic >>>>> widgets. >>>>> >>>>> It's your turn now. >>>>> >>>>> Cheers, >>>>> Doru >>>>> >>>>> -- >>>>> www.tudorgirba.com >>>>> >>>>> "Every thing has its own flow" >>>> >>>> -- >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>> Alexandre Bergel http://www.bergel.eu >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>> >>>> >>>> >>>> >>> >>> >>> >>> -- >>> www.tudorgirba.com >>> >>> "Every thing has its own flow" >> >> >> >> -- >> -- >> "NISHIHARA Satoshi" >> [:goonsh :nsh | ^ nishis perform: goonsh with: nsh] >> <moose.jpg> > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > -- -- "NISHIHARA Satoshi" [:goonsh :nsh | ^ nishis perform: goonsh with: nsh]

Dec. 31, 2013

Re: [Pharo-dev] [Pharo-users] Spotlight Demo

by Sean P. DeNigris

EstebanLM wrote > looks coolâ¦ but it does not works in 3.0 :( Yes :) >> To load (tested in Pharo 2.0 latest): But I'd be surprised if it took much to port. In fact, I'm surprised it doesn't work. It's pretty much pure Morphic / Announcements. I wasn't going to port it because I need it on 2.0 and I figured it wouldn't go into 3.0 with the feature freeze, so I was going to shoot for 4.0, and refactor EntryCompletion (which is a mess) at that time. But let me know... ----- Cheers, Sean -- View this message in context: http://forum.world.st/Spotlight-Demo-tp4733076p4733322.html Sent from the Pharo Smalltalk Developers mailing list archive at Nabble.com.

Dec. 31, 2013

Re: [Pharo-dev] [Pharo-users] Spotlight Demo

by Sean P. DeNigris

Benjamin Van Ryseghem-2 wrote > Did you had a look at: > https://ci.inria.fr/pharo-contribution/job/New-Pharo-IDE/ > There is also a Spotlight thingy there :) No, I didn't know about that. How do I view the "Spotlight thingy" ;)? The Spotlight that come up with the shortcut looks the same to me... ----- Cheers, Sean -- View this message in context: http://forum.world.st/Spotlight-Demo-tp4733076p4733320.html Sent from the Pharo Smalltalk Developers mailing list archive at Nabble.com.

Dec. 31, 2013

Re: [Pharo-dev] Nautilus: Selection and Drag & Drop Redux

by Sean P. DeNigris

Benjamin Van Ryseghem-2 wrote > On 30 Dec 2013, at 01:55, Sean P. DeNigris < > sean@ > > wrote: >> Will that be used for Nautilus eventually? > > There is a bug entry. With a slice. I'm not sure what you mean. Sounds like a "maybe" ;) is the bug/slice related to using NewList for Nautilus? Will Nautilus be rewritten with Spec (and therefore NewList)? This is not a critical problem, just a minor annoyance, but could be off-putting for new users... ----- Cheers, Sean -- View this message in context: http://forum.world.st/Nautilus-Selection-and-Drag-Drop-Redux-tp4732930p4733… Sent from the Pharo Smalltalk Developers mailing list archive at Nabble.com.

Dec. 31, 2013