December 2013 - Pharo-dev - lists.pharo.org

Re: [Pharo-dev] Building Pharo using Interpreter Class

by Kirstin Heidler

Thanks phil, works. :) We were trying to do weird things.... but nevermind. We will get to the real work now. Kirstin Am 03.12.2013 14:41, schrieb phil(a)highoctane.be: > >But the StackInterpreter and Stack VM should be working, right? > > Yes. Use PharoSVMBuilder class for building that one. > > >We just found out, that once an Image has been saved with a Cog-VM > there can be >issues with floating points because of the ordering of > bits? LE vs. BE? At least it says so i>n this README [2]. > >May this be one of the problems we had when trying to start our image > with the >generated StackVM? > > Not sure about that. The FloatingPoint plugin is the FloatingPoint > plugin. And it is used in both VMs. > > I can open an image with both. > > > Also, which Pharo version do you reccomend to use? We downloaded the > one from this > >[1] repository. I think it is a Pharo 2.0? > > Use Pharo2.0 > > >Thanks a lot for your help. Nice to know that the Interpreter class > is not working. :) > > Everyone would love to have those all toghether but the Interpreter is > David T. Lewis thing, where Cog and Stack are Eliot thing. And Pharo > does some of its own things to Cog/Stack. + Clement working on his own > stuff as well. > > Not there yet but who knows. > > > Phil > > > --- > Philippe Back > Dramatic Performance Improvements > Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 > Mail:phil@highoctane.be <mailto:Mail%3Aphil@highoctane.be> | Web: > http://philippeback.eu > Blog: http://philippeback.be | Twitter: @philippeback > Youtube: http://www.youtube.com/user/philippeback/videos > > High Octane SPRL > rue cour Boisacq 101 | 1301 Bierges | Belgium > > Pharo Consortium Member - http://consortium.pharo.org/ > Featured on the Software Process and Measurement Cast - > http://spamcast.libsyn.com > Sparx Systems Enterprise Architect and Ability Engineering EADocX > Value Added Reseller > > > > On Tue, Dec 3, 2013 at 2:34 PM, Kirstin Heidler > <kirstin.heidler(a)student.hpi.uni-potsdam.de > <mailto:kirstin.heidler@student.hpi.uni-potsdam.de>> wrote: > > But the StackInterpreter and Stack VM should be working, right? > > We just found out, that once an Image has been saved with a Cog-VM > there can be issues with floating points because of the ordering > of bits? LE vs. BE? At least it says so in this README [2]. > May this be one of the problems we had when trying to start our > image with the generated StackVM? > Also, which Pharo version do you reccomend to use? We downloaded > the one from this [1] repository. I think it is a Pharo 2.0? > > Thanks a lot for your help. Nice to know that the Interpreter > class is not working. :) > > Kirstin > > [1] https://github.com/pharo-project/pharo-vm > [2] http://www.squeakvm.org/svn/squeak/branches/Cog/README > > Am 03.12.2013 14:10, schrieb phil(a)highoctane.be > <mailto:phil@highoctane.be>: >> Oops. There is no pure interpreter. Sorry. Word skipped on damn >> phone. >> >> On Tuesday, December 3, 2013, Kirstin Heidler wrote: >> >> But for some reason we have not been able to work with it >> correctly. >> We may manange to build, as well as make it, but if not >> before it will fail when we try to open our image with the >> new VM. >> >> What configuration do we need to adapt to correctly build >> everything with the Interpreter class, or at least the >> StackInterpreter Class(Not CoInterpreter, because we do not >> want to have JIT). >> >> Kirstin >> >> Am 03.12.2013 13:33, schrieb phil(a)highoctane.be: >>> There is working pure interpreter in the pharovm. >>> >>> Phil >>> On Tuesday, December 3, 2013, Kirstin Heidler wrote: >>> >>> My freind Dimitri was not able to post his message. I am >>> working with him on this. >>> >>> _______________________________________________________________________________ >>> >>> Hello, >>> >>> as part of a Seminar in the University im trying to >>> build the PharoVM. >>> According to the README file here ([1]) I was able to >>> generate and to >>> build the VM successfully. >>> >>> Now I would like to build the VM without Cog or >>> Stack-to-Register >>> optimizations... The problem here is, that I could not >>> find any config >>> class (which is a subclass of CPlatformConfig), that >>> provides the right >>> configurations and allows to build the VM without >>> errors. I have tried >>> to modify PharoUnixConfig(because it was the default >>> config class), but >>> unfortunately the build failes when the compiler tries >>> to compile >>> gcc3x-interp.c. >>> >>> Could somebody help me with this problem? How should I >>> configure my own >>> Config class? >>> >>> Basically our Group tries to implement an object table >>> in Pharo and we >>> want to use (and modify) the basic Interpreter class. >>> >>> >>> >>> [1] https://github.com/pharo-project/pharo-vm >>> >>> >>> Best regards, >>> Dimitri Korsch >>> >>> >>> >>> -- >>> --- >>> Philippe Back >>> Dramatic Performance Improvements >>> Mob: +32(0) 478 650 140 <tel:%2B32%280%29%20478%20650%20140> >>> | Fax: +32 (0) 70 408 027 <tel:%2B32%20%280%29%2070%20408%20027> >>> Mail:phil@highoctane.be | Web: http://philippeback.eu >>> Blog: http://philippeback.be | Twitter: @philippeback >>> Youtube: http://www.youtube.com/user/philippeback/videos >>> >>> High Octane SPRL >>> rue cour Boisacq 101 | 1301 Bierges | Belgium >>> >>> Pharo Consortium Member - http://consortium.pharo.org/ >>> Featured on the Software Process and Measurement Cast - >>> http://spamcast.libsyn.com >>> Sparx Systems Enterprise Architect and Ability Engineering >>> EADocX Value Added Reseller >>> >>> >> >> >> >> -- >> --- >> Philippe Back >> Dramatic Performance Improvements >> Mob: +32(0) 478 650 140 <tel:%2B32%280%29%20478%20650%20140> | >> Fax: +32 (0) 70 408 027 <tel:%2B32%20%280%29%2070%20408%20027> >> Mail:phil@highoctane.be <mailto:Mail%3Aphil@highoctane.be> | Web: >> http://philippeback.eu >> Blog: http://philippeback.be | Twitter: @philippeback >> Youtube: http://www.youtube.com/user/philippeback/videos >> >> High Octane SPRL >> rue cour Boisacq 101 | 1301 Bierges | Belgium >> >> Pharo Consortium Member - http://consortium.pharo.org/ >> Featured on the Software Process and Measurement Cast - >> http://spamcast.libsyn.com >> Sparx Systems Enterprise Architect and Ability Engineering EADocX >> Value Added Reseller >> >> > >

Dec. 3, 2013

Re: [Pharo-dev] Grease conflicts #packages with RPackage

by Stephan Eggermont

Issue 12324 There-should-be-no-class-side-implementations-of-packages-except-for-ClassDescription I couldnât commit a slice Stephan

Dec. 3, 2013

Amber 0.12.2 released!

by Nicolas Petton

Hi, We are pleased to announce the second minor release of Amber 0.12! This release fixes some issues, especially one related to bower[1] and includes some API changes as listed below: * Collection >> contains: is deprecated in favor of anySatisfy: + Announcer + >>on:doOnce: + String + >>uriEncoded + >>uriDecoded + >>uriComponentEncoded + >>uriComponentDecoded + Collection + >>removeAll + >>ifEmpty:ifNotEmpty: + >>ifNotEmpty:ifEmpty: + >>anyOne + >>noneSatisfy: + >>anySatisfy: + >>allSatisfy: [1](https://github.com/amber-smalltalk/amber/pull/717) Cheers, Nico

Dec. 3, 2013

Re: [Pharo-dev] Building Pharo using Interpreter Class

by phil＠highoctane.be

>But the StackInterpreter and Stack VM should be working, right? Yes. Use PharoSVMBuilder class for building that one. >We just found out, that once an Image has been saved with a Cog-VM there can be >issues with floating points because of the ordering of bits? LE vs. BE? At least it says so i>n this README [2]. >May this be one of the problems we had when trying to start our image with the >generated StackVM? Not sure about that. The FloatingPoint plugin is the FloatingPoint plugin. And it is used in both VMs. I can open an image with both. > Also, which Pharo version do you reccomend to use? We downloaded the one from this >[1] repository. I think it is a Pharo 2.0? Use Pharo2.0 >Thanks a lot for your help. Nice to know that the Interpreter class is not working. :) Everyone would love to have those all toghether but the Interpreter is David T. Lewis thing, where Cog and Stack are Eliot thing. And Pharo does some of its own things to Cog/Stack. + Clement working on his own stuff as well. Not there yet but who knows. Phil --- Philippe Back Dramatic Performance Improvements Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 Mail:phil@highoctane.be | Web: http://philippeback.eu Blog: http://philippeback.be | Twitter: @philippeback Youtube: http://www.youtube.com/user/philippeback/videos High Octane SPRL rue cour Boisacq 101 | 1301 Bierges | Belgium Pharo Consortium Member - http://consortium.pharo.org/ Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller On Tue, Dec 3, 2013 at 2:34 PM, Kirstin Heidler < kirstin.heidler(a)student.hpi.uni-potsdam.de> wrote: > But the StackInterpreter and Stack VM should be working, right? > > We just found out, that once an Image has been saved with a Cog-VM there > can be issues with floating points because of the ordering of bits? LE vs. > BE? At least it says so in this README [2]. > May this be one of the problems we had when trying to start our image with > the generated StackVM? > Also, which Pharo version do you reccomend to use? We downloaded the one > from this [1] repository. I think it is a Pharo 2.0? > > Thanks a lot for your help. Nice to know that the Interpreter class is not > working. :) > > Kirstin > > [1] https://github.com/pharo-project/pharo-vm > [2] http://www.squeakvm.org/svn/squeak/branches/Cog/README > > Am 03.12.2013 14:10, schrieb phil(a)highoctane.be: > > Oops. There is no pure interpreter. Sorry. Word skipped on damn phone. > > On Tuesday, December 3, 2013, Kirstin Heidler wrote: > >> But for some reason we have not been able to work with it correctly. >> We may manange to build, as well as make it, but if not before it will >> fail when we try to open our image with the new VM. >> >> What configuration do we need to adapt to correctly build everything with >> the Interpreter class, or at least the StackInterpreter Class(Not >> CoInterpreter, because we do not want to have JIT). >> >> Kirstin >> >> Am 03.12.2013 13:33, schrieb phil(a)highoctane.be: >> >> There is working pure interpreter in the pharovm. >> >> Phil >> On Tuesday, December 3, 2013, Kirstin Heidler wrote: >> >>> My freind Dimitri was not able to post his message. I am working with >>> him on this. >>> >>> >>> _______________________________________________________________________________ >>> >>> Hello, >>> >>> as part of a Seminar in the University im trying to build the PharoVM. >>> According to the README file here ([1]) I was able to generate and to >>> build the VM successfully. >>> >>> Now I would like to build the VM without Cog or Stack-to-Register >>> optimizations... The problem here is, that I could not find any config >>> class (which is a subclass of CPlatformConfig), that provides the right >>> configurations and allows to build the VM without errors. I have tried >>> to modify PharoUnixConfig(because it was the default config class), but >>> unfortunately the build failes when the compiler tries to compile >>> gcc3x-interp.c. >>> >>> Could somebody help me with this problem? How should I configure my own >>> Config class? >>> >>> Basically our Group tries to implement an object table in Pharo and we >>> want to use (and modify) the basic Interpreter class. >>> >>> >>> >>> [1] https://github.com/pharo-project/pharo-vm >>> >>> >>> Best regards, >>> Dimitri Korsch >>> >>> >> >> -- >> --- >> Philippe Back >> Dramatic Performance Improvements >> Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 >> Mail:phil@highoctane.be | Web: http://philippeback.eu >> Blog: http://philippeback.be | Twitter: @philippeback >> Youtube: http://www.youtube.com/user/philippeback/videos >> >> High Octane SPRL >> rue cour Boisacq 101 | 1301 Bierges | Belgium >> >> Pharo Consortium Member - http://consortium.pharo.org/ >> Featured on the Software Process and Measurement Cast - >> http://spamcast.libsyn.com >> Sparx Systems Enterprise Architect and Ability Engineering EADocX Value >> Added Reseller >> >> >> >> >> > > -- > --- > Philippe Back > Dramatic Performance Improvements > Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 > Mail:phil@highoctane.be | Web: http://philippeback.eu > Blog: http://philippeback.be | Twitter: @philippeback > Youtube: http://www.youtube.com/user/philippeback/videos > > High Octane SPRL > rue cour Boisacq 101 | 1301 Bierges | Belgium > > Pharo Consortium Member - http://consortium.pharo.org/ > Featured on the Software Process and Measurement Cast - > http://spamcast.libsyn.com > Sparx Systems Enterprise Architect and Ability Engineering EADocX Value > Added Reseller > > > > >

Dec. 3, 2013

Re: [Pharo-dev] Building Pharo using Interpreter Class

by Kirstin Heidler

But the StackInterpreter and Stack VM should be working, right? We just found out, that once an Image has been saved with a Cog-VM there can be issues with floating points because of the ordering of bits? LE vs. BE? At least it says so in this README [2]. May this be one of the problems we had when trying to start our image with the generated StackVM? Also, which Pharo version do you reccomend to use? We downloaded the one from this [1] repository. I think it is a Pharo 2.0? Thanks a lot for your help. Nice to know that the Interpreter class is not working. :) Kirstin [1] https://github.com/pharo-project/pharo-vm [2] http://www.squeakvm.org/svn/squeak/branches/Cog/README Am 03.12.2013 14:10, schrieb phil(a)highoctane.be: > Oops. There is no pure interpreter. Sorry. Word skipped on damn phone. > > On Tuesday, December 3, 2013, Kirstin Heidler wrote: > > But for some reason we have not been able to work with it correctly. > We may manange to build, as well as make it, but if not before it > will fail when we try to open our image with the new VM. > > What configuration do we need to adapt to correctly build > everything with the Interpreter class, or at least the > StackInterpreter Class(Not CoInterpreter, because we do not want > to have JIT). > > Kirstin > > Am 03.12.2013 13:33, schrieb phil(a)highoctane.be <javascript:_e({}, > 'cvml', 'phil(a)highoctane.be');>: >> There is working pure interpreter in the pharovm. >> >> Phil >> On Tuesday, December 3, 2013, Kirstin Heidler wrote: >> >> My freind Dimitri was not able to post his message. I am >> working with him on this. >> >> _______________________________________________________________________________ >> >> Hello, >> >> as part of a Seminar in the University im trying to build the >> PharoVM. >> According to the README file here ([1]) I was able to >> generate and to >> build the VM successfully. >> >> Now I would like to build the VM without Cog or Stack-to-Register >> optimizations... The problem here is, that I could not find >> any config >> class (which is a subclass of CPlatformConfig), that provides >> the right >> configurations and allows to build the VM without errors. I >> have tried >> to modify PharoUnixConfig(because it was the default config >> class), but >> unfortunately the build failes when the compiler tries to compile >> gcc3x-interp.c. >> >> Could somebody help me with this problem? How should I >> configure my own >> Config class? >> >> Basically our Group tries to implement an object table in >> Pharo and we >> want to use (and modify) the basic Interpreter class. >> >> >> >> [1] https://github.com/pharo-project/pharo-vm >> >> >> Best regards, >> Dimitri Korsch >> >> >> >> -- >> --- >> Philippe Back >> Dramatic Performance Improvements >> Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 >> Mail:phil@highoctane.be <javascript:_e({}, 'cvml', >> 'Mail%3Aphil(a)highoctane.be');> | Web: http://philippeback.eu >> Blog: http://philippeback.be | Twitter: @philippeback >> Youtube: http://www.youtube.com/user/philippeback/videos >> >> High Octane SPRL >> rue cour Boisacq 101 | 1301 Bierges | Belgium >> >> Pharo Consortium Member - http://consortium.pharo.org/ >> Featured on the Software Process and Measurement Cast - >> http://spamcast.libsyn.com >> Sparx Systems Enterprise Architect and Ability Engineering EADocX >> Value Added Reseller >> >> > > > > -- > --- > Philippe Back > Dramatic Performance Improvements > Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 > Mail:phil@highoctane.be <mailto:Mail%3Aphil@highoctane.be> | Web: > http://philippeback.eu > Blog: http://philippeback.be | Twitter: @philippeback > Youtube: http://www.youtube.com/user/philippeback/videos > > High Octane SPRL > rue cour Boisacq 101 | 1301 Bierges | Belgium > > Pharo Consortium Member - http://consortium.pharo.org/ > Featured on the Software Process and Measurement Cast - > http://spamcast.libsyn.com > Sparx Systems Enterprise Architect and Ability Engineering EADocX > Value Added Reseller > >

Dec. 3, 2013

Re: [Pharo-dev] Unifying Testing Ideas

by Esteban A. Maringolo

2013/12/3 Dennis Schetinin <chaetal(a)gmail.com> > > I see the only correct way to build a good testing environment: tests should be basically objects, not methods. They are objects. Instances of TestCase. But for simplicity they're implemented in a single "factory" class, the TestCase subclass... Esteban A. Maringolo

Dec. 3, 2013

Re: [Pharo-dev] Roassal Bug related to Athens?

by Igor Stasenko

On 3 December 2013 14:18, Usman Bhatti <usman.bhatti(a)gmail.com> wrote: > Igor, > > I had a look at Athens demo to understand how to manage sessions and > surfaces because Roassal uses AthensSurface and there is a defensive > mechanism in place in Roassal to initialize the surface in case it is not > done. In the meantime, I have discovered that the red rectangle bug is > present in Athens demos as well. > > So, to reproduce. > AthensFlakeDemo new openInWorld > save image > open image > > I tested in Moose 5.0. > > 1. Should I open a bug entry in Pharo? > > only if you intend to fix it. because this demo was not intended to be 'fully featured, end-user compatible and fool-proof demo'. it just a demo to show animation and discard it, but if you insist this is a bug, feel free to fix it. > 2. With my superficial knowledge of Athens, my guess is that the session > management can be done in Athens so that Roassal (and other tools built on > top of Athens) do not need to do it. May be it is the case already but the > demos are not using it then. > > I disagree. Because then, files can also open/close and delete themselves automatically, so you will be left only to do reading and writing... Resource management is an application-level responsibility, not framework level. I cannot predict in Athens, how often one wants to create/destroy or (re)use surfaces, and therefore i cannot create and dispose them when i see fit within framework. Correct me if i wrong. > Usman > > > > On Mon, Dec 2, 2013 at 5:14 PM, Usman Bhatti <usman.bhatti(a)gmail.com>wrote: > >> Hello Igor, >> >> Moose 5.0 is using Athens as default canvas for Roassal and we have bug >> with Roassal that seems to be related to Athens. >> http://code.google.com/p/moose-technology/issues/detail?id=1019 >> >> I think it is related to the fact that we create a surface in the OS with >> Athens and once we quit the image, the surface is destroyed as well. So, >> when image is restarted with the visualization trying to use the surface, >> we get the error. >> >> Could you point to what possibly can be done to avoid this error? Merely >> checking the existence of an appropriate drawing surface in Athens every >> time visualization is drawn, would it suffice? >> >> regards, >> >> Usman >> > > -- Best regards, Igor Stasenko.

Dec. 3, 2013

Re: [Pharo-dev] Roassal Bug related to Athens?

by Usman Bhatti

Igor, I had a look at Athens demo to understand how to manage sessions and surfaces because Roassal uses AthensSurface and there is a defensive mechanism in place in Roassal to initialize the surface in case it is not done. In the meantime, I have discovered that the red rectangle bug is present in Athens demos as well. So, to reproduce. AthensFlakeDemo new openInWorld save image open image I tested in Moose 5.0. 1. Should I open a bug entry in Pharo? 2. With my superficial knowledge of Athens, my guess is that the session management can be done in Athens so that Roassal (and other tools built on top of Athens) do not need to do it. May be it is the case already but the demos are not using it then. Usman On Mon, Dec 2, 2013 at 5:14 PM, Usman Bhatti <usman.bhatti(a)gmail.com> wrote: > Hello Igor, > > Moose 5.0 is using Athens as default canvas for Roassal and we have bug > with Roassal that seems to be related to Athens. > http://code.google.com/p/moose-technology/issues/detail?id=1019 > > I think it is related to the fact that we create a surface in the OS with > Athens and once we quit the image, the surface is destroyed as well. So, > when image is restarted with the visualization trying to use the surface, > we get the error. > > Could you point to what possibly can be done to avoid this error? Merely > checking the existence of an appropriate drawing surface in Athens every > time visualization is drawn, would it suffice? > > regards, > > Usman >

Dec. 3, 2013

Re: [Pharo-dev] Building Pharo using Interpreter Class

by phil＠highoctane.be

Oops. There is no pure interpreter. Sorry. Word skipped on damn phone. On Tuesday, December 3, 2013, Kirstin Heidler wrote: > But for some reason we have not been able to work with it correctly. > We may manange to build, as well as make it, but if not before it will > fail when we try to open our image with the new VM. > > What configuration do we need to adapt to correctly build everything with > the Interpreter class, or at least the StackInterpreter Class(Not > CoInterpreter, because we do not want to have JIT). > > Kirstin > > Am 03.12.2013 13:33, schrieb phil(a)highoctane.be <javascript:_e({}, > 'cvml', 'phil(a)highoctane.be');>: > > There is working pure interpreter in the pharovm. > > Phil > On Tuesday, December 3, 2013, Kirstin Heidler wrote: > >> My freind Dimitri was not able to post his message. I am working with him >> on this. >> >> >> _______________________________________________________________________________ >> >> Hello, >> >> as part of a Seminar in the University im trying to build the PharoVM. >> According to the README file here ([1]) I was able to generate and to >> build the VM successfully. >> >> Now I would like to build the VM without Cog or Stack-to-Register >> optimizations... The problem here is, that I could not find any config >> class (which is a subclass of CPlatformConfig), that provides the right >> configurations and allows to build the VM without errors. I have tried >> to modify PharoUnixConfig(because it was the default config class), but >> unfortunately the build failes when the compiler tries to compile >> gcc3x-interp.c. >> >> Could somebody help me with this problem? How should I configure my own >> Config class? >> >> Basically our Group tries to implement an object table in Pharo and we >> want to use (and modify) the basic Interpreter class. >> >> >> >> [1] https://github.com/pharo-project/pharo-vm >> >> >> Best regards, >> Dimitri Korsch >> >> > > -- > --- > Philippe Back > Dramatic Performance Improvements > Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 > Mail:phil@highoctane.be <javascript:_e({}, 'cvml', > 'Mail%3Aphil(a)highoctane.be');> | Web: http://philippeback.eu > Blog: http://philippeback.be | Twitter: @philippeback > Youtube: http://www.youtube.com/user/philippeback/videos > > High Octane SPRL > rue cour Boisacq 101 | 1301 Bierges | Belgium > > Pharo Consortium Member - http://consortium.pharo.org/ > Featured on the Software Process and Measurement Cast - > http://spamcast.libsyn.com > Sparx Systems Enterprise Architect and Ability Engineering EADocX Value > Added Reseller > > > > > -- --- Philippe Back Dramatic Performance Improvements Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 Mail:phil@highoctane.be | Web: http://philippeback.eu Blog: http://philippeback.be | Twitter: @philippeback Youtube: http://www.youtube.com/user/philippeback/videos High Octane SPRL rue cour Boisacq 101 | 1301 Bierges | Belgium Pharo Consortium Member - http://consortium.pharo.org/ Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller

Dec. 3, 2013

Re: [Pharo-dev] how i can browse the users of some trait?

by Igor Stasenko

yes, thanks. On 3 December 2013 14:07, Nicolai Hess <nicolaihess(a)web.de> wrote: > 2013/12/3 Igor Stasenko <siguctua(a)gmail.com> > >> namely, TClass >> cmd-shift-N doesn't helps >> >> -- >> Best regards, >> Igor Stasenko. >> > > > TClass users > or > Menu > "Browse users" in System browser? > > > -- Best regards, Igor Stasenko.

Dec. 3, 2013