November 2012 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Git API for Pharo

by Frank Shearar

On 7 November 2012 08:08, roberto.minelli(a)usi.ch <roberto.minelli(a)usi.ch> wrote: > Hello, > > I need to access a Git repository programmatically from Pharo. > > Is there any API to work with Git working copies, access and manipulate repositories programmatically? > > In short I need to checkout each revision of a project and extract some meta-data from each revision. > > Thanks in advance, > Roberto Gitocello (https://github.com/timfel/gitocello) will do a lot of what you ask, and anything extra will be easy to add if you follow the examples of what's already there. I doubt it'd be as shiny and complete as Camillo et al's work, but it might be good enough for now. frank

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by Damien Cassou

On Wed, Nov 7, 2012 at 10:08 AM, roberto.minelli(a)usi.ch <roberto.minelli(a)usi.ch> wrote: > I tried to install what you proposed in a clean Pharo 1.4 image, > but I got a MessageNotUnderstood: ByteString>>golferReferences. you may try changing golferReferences to goferReferences -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

Nov. 7, 2012

Re: [Pharo-project] Pharo 2.0 and Metacello preview

by Mariano Martinez Peck

Hi Igor. Not everything is easy in this life ;) "only about including osprocess to image" is actually quite hard. OSProcess uses FileDirectory a lot. During the last sprint, Francois and me where trying to make oSProcess to work in 2.0. We spent the whole afternoon and it is yet not fully working. On Wed, Nov 7, 2012 at 12:24 AM, Igor Stasenko <siguctua(a)gmail.com> wrote: > and afaik, pharo vms coming with osprocess by default. so it is only > about including osprocess to image. > > On 6 November 2012 16:24, Frank Shearar <frank.shearar(a)gmail.com> wrote: > > On 6 November 2012 19:07, Igor Stasenko <siguctua(a)gmail.com> wrote: > >> On 6 November 2012 16:00, Frank Shearar <frank.shearar(a)gmail.com> > wrote: > >>> On 6 November 2012 18:07, Igor Stasenko <siguctua(a)gmail.com> wrote: > >>>> Basically, what is needed is: > >>>> VMs with OSProcess installed by default > >>>> Image(s) with OSProcess > >>>> > >>>> then Metacello Preview will be functional. > >>>> > >>>> The reason why , i personally want that, is > >>>> to be able to use git for monticello. and be able to store C sources > >>>> and smalltalk sources (VMMaker) in a single git repo. > >>> > >>> Igor, I assume then that neither Filetree nor Gitocello meet your > >>> needs? (Both map Monticello repositories to git.) > >>> > >> Well, one of the reasons why i want a preview is to figure that out: > >> does it fits or not, > >> and what/how it can be used. > > > > Right, I've jumped the gun then. You want Metacello Preview precisely > > so you can try out either/both/something else! > > > > frank > > > >>> frank > >>> > >> > >> -- > >> Best regards, > >> Igor Stasenko. > >> > > > > > > -- > Best regards, > Igor Stasenko. > > -- Mariano http://marianopeck.wordpress.com

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by roberto.minelli＠usi.ch

Hi Max, Thanks for pointing me in this direction. I tried to install what you proposed in a clean Pharo 1.4 image, but I got a MessageNotUnderstood: ByteString>>golferReferences. Any hint? Cheers, Roberto On Nov 7, 2012, at 9:35 AM, Max Leske <maxleske(a)gmail.com> wrote: > Hi Roberto > > Yes, there is, but it is work in progress. > Try this in Pharo 1.4 or 2.0: > > Gofer new > repository: 'http://ss3.gemstone.com/ss/FileSystem-Git'; > package: 'FileSystem-Git'; > package: 'System-Hashing'; > load. > > If you need any help, there's a dedicated mailing list: smalltalk-git(a)googlegroups.com. > > Cheers, > Max > > > On 07.11.2012, at 09:08, "roberto.minelli(a)usi.ch" <roberto.minelli(a)usi.ch> wrote: > >> Hello, >> >> I need to access a Git repository programmatically from Pharo. >> >> Is there any API to work with Git working copies, access and manipulate repositories programmatically? >> >> In short I need to checkout each revision of a project and extract some meta-data from each revision. >> >> Thanks in advance, >> Roberto > >

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by Max Leske

Agreed. But we should make sure that we keep the old packages. Just to be sure. On 07.11.2012, at 09:46, Camillo Bruni <camillobruni(a)gmail.com> wrote: > > On 2012-11-07, at 09:45, Max Leske <maxleske(a)gmail.com> wrote: > >> There is also no support for working copies (i.e. we track changes in the image at the moment but command-line Git won't know about it). >> >> That's the wrong repo Camillo :) > > dammit! :D we should delete the old ones then, it's such a mess I never know where to look.. > >> Use the Filesystem-Git repository I pointed you to. >> >> Max >> >> On 07.11.2012, at 09:36, Camillo Bruni <camillobruni(a)gmail.com> wrote: >> >>> We have a almost 100% working git library for the low-level api. >>> We have the git:// and dumb http:// protocol almost fully defined, we still miss >>> smart http://. >>> >>> The only thing we cannot do yet properly is cloning a repository, but >>> that can be easily scripted with OSProcess. >>> >>> The latest sources with plenty of tests are available here: >>> http://ss3.gemstone.com/ss/FSGit-Experimental.html >>> >>> >>> On 2012-11-07, at 09:08, "roberto.minelli(a)usi.ch" <roberto.minelli(a)usi.ch> wrote: >>> >>>> Hello, >>>> >>>> I need to access a Git repository programmatically from Pharo. >>>> >>>> Is there any API to work with Git working copies, access and manipulate repositories programmatically? >>>> >>>> In short I need to checkout each revision of a project and extract some meta-data from each revision. >>>> >>>> Thanks in advance, >>>> Roberto >>> >>> >> >> > >

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by Camillo Bruni

On 2012-11-07, at 09:45, Max Leske <maxleske(a)gmail.com> wrote: > There is also no support for working copies (i.e. we track changes in the image at the moment but command-line Git won't know about it). > > That's the wrong repo Camillo :) dammit! :D we should delete the old ones then, it's such a mess I never know where to look.. > Use the Filesystem-Git repository I pointed you to. > > Max > > On 07.11.2012, at 09:36, Camillo Bruni <camillobruni(a)gmail.com> wrote: > >> We have a almost 100% working git library for the low-level api. >> We have the git:// and dumb http:// protocol almost fully defined, we still miss >> smart http://. >> >> The only thing we cannot do yet properly is cloning a repository, but >> that can be easily scripted with OSProcess. >> >> The latest sources with plenty of tests are available here: >> http://ss3.gemstone.com/ss/FSGit-Experimental.html >> >> >> On 2012-11-07, at 09:08, "roberto.minelli(a)usi.ch" <roberto.minelli(a)usi.ch> wrote: >> >>> Hello, >>> >>> I need to access a Git repository programmatically from Pharo. >>> >>> Is there any API to work with Git working copies, access and manipulate repositories programmatically? >>> >>> In short I need to checkout each revision of a project and extract some meta-data from each revision. >>> >>> Thanks in advance, >>> Roberto >> >> > >

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by Max Leske

There is also no support for working copies (i.e. we track changes in the image at the moment but command-line Git won't know about it). That's the wrong repo Camillo :) Use the Filesystem-Git repository I pointed you to. Max On 07.11.2012, at 09:36, Camillo Bruni <camillobruni(a)gmail.com> wrote: > We have a almost 100% working git library for the low-level api. > We have the git:// and dumb http:// protocol almost fully defined, we still miss > smart http://. > > The only thing we cannot do yet properly is cloning a repository, but > that can be easily scripted with OSProcess. > > The latest sources with plenty of tests are available here: > http://ss3.gemstone.com/ss/FSGit-Experimental.html > > > On 2012-11-07, at 09:08, "roberto.minelli(a)usi.ch" <roberto.minelli(a)usi.ch> wrote: > >> Hello, >> >> I need to access a Git repository programmatically from Pharo. >> >> Is there any API to work with Git working copies, access and manipulate repositories programmatically? >> >> In short I need to checkout each revision of a project and extract some meta-data from each revision. >> >> Thanks in advance, >> Roberto > >

Nov. 7, 2012

Re: [Pharo-project] [NativeBoost] pass an array of args to external function

by Camillo Bruni

Just copy paste the thing you posted in the NBBasicExamples and we're done. A couple of examples which show common problems will help certainly help people to understand. Plus we should convert the examples into tests so they are always run! On 2012-11-07, at 09:28, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > > On Nov 6, 2012, at 11:06 PM, Igor Stasenko wrote: > >> On 6 November 2012 17:57, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >>> This is clearly something to add to the documentation of NativeBoost. >>> Igor can you do it? >> >> I already have a description of memory management API for NB in docs. >> And telling how manage external memory is... ahem.. not really fits into docs :) >> Maybe a tutor or something. > > think not technical but user! > Id o not give a shit if what helps me is called a doc or a tutorial. > I care that it helps me fixing my problem. > And what I see is that the example of Max is a nice example of a recurring problem > people face. > > Stef >> >> >> >> -- >> Best regards, >> Igor Stasenko. >> > >

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by Camillo Bruni

We have a almost 100% working git library for the low-level api. We have the git:// and dumb http:// protocol almost fully defined, we still miss smart http://. The only thing we cannot do yet properly is cloning a repository, but that can be easily scripted with OSProcess. The latest sources with plenty of tests are available here: http://ss3.gemstone.com/ss/FSGit-Experimental.html On 2012-11-07, at 09:08, "roberto.minelli(a)usi.ch" <roberto.minelli(a)usi.ch> wrote: > Hello, > > I need to access a Git repository programmatically from Pharo. > > Is there any API to work with Git working copies, access and manipulate repositories programmatically? > > In short I need to checkout each revision of a project and extract some meta-data from each revision. > > Thanks in advance, > Roberto

Nov. 7, 2012

Re: [Pharo-project] Git API for Pharo

by Max Leske

Hi Roberto Yes, there is, but it is work in progress. Try this in Pharo 1.4 or 2.0: Gofer new repository: 'http://ss3.gemstone.com/ss/FileSystem-Git'; package: 'FileSystem-Git'; package: 'System-Hashing'; load. If you need any help, there's a dedicated mailing list: smalltalk-git(a)googlegroups.com. Cheers, Max On 07.11.2012, at 09:08, "roberto.minelli(a)usi.ch" <roberto.minelli(a)usi.ch> wrote: > Hello, > > I need to access a Git repository programmatically from Pharo. > > Is there any API to work with Git working copies, access and manipulate repositories programmatically? > > In short I need to checkout each revision of a project and extract some meta-data from each revision. > > Thanks in advance, > Roberto

Nov. 7, 2012