November 2011 - Pharo-dev - lists.pharo.org

[Pharo-project] Slow text input?

by Sean T Allen

Hi all, I opened an old 1.2.1 image and text input was incredibly slow. I tried the latest one click and text input is very slow and jerky. Has anyone else ever experienced something like this on a Mac? Its really frustrating. Every pharo image I have is seemingly unusable. -Sean-

Nov. 15, 2011

Re: [Pharo-project] Comparing a package code with current code

by Igor Stasenko

Can you please try this with latest pharo image? On 14 November 2011 21:15, Hernan Wilkinson <hernan.wilkinson(a)10pines.com> wrote: > Here is a screenshot showing what I get... on the left panel nothing and on > the right panel the code of the package... and of course, that method, > #debug, is implemented in the current image. > Should I open a defect? > > On Sun, Nov 13, 2011 at 11:39 AM, Hernan Wilkinson > <hernan.wilkinson(a)10pines.com> wrote: >> >> yeah... it does not work with this package/image version... maybe >> something has changed and that is the reason... >> >> On Sat, Nov 12, 2011 at 4:36 AM, Igor Stasenko <siguctua(a)gmail.com> wrote: >>> >>> changes button always worked for me. >>> >>> On 12 November 2011 01:12, Johannes Rasche <johannesrasche(a)mac.com> >>> wrote: >>> > what else would be compared ?! >>> > >>> > anyway I didn't do that, so I cannot judge >>> > >>> > I used merge, but that may be cumbersome >>> > >>> > Johannes >>> > >>> > Am 12.11.11 00:03, schrieb Hernan Wilkinson: >>> > >>> > nop... it does not compare the code from the package and image... >>> > It think I did this before but I don't find the way now. >>> > >>> > On Fri, Nov 11, 2011 at 7:51 PM, Francois Stephany >>> > <tulipe.moutarde(a)gmail.com> wrote: >>> >> >>> >> Hi Hernan, >>> >> >>> >> Can't you use the 'Changes' button on the Monticello browser? >>> >> >>> >>> How can I see the differences between code that is in a >>> >>> package and the code in an image? >>> >> >>> > >>> > >>> > >>> > -- >>> > HernÃ¡n Wilkinson >>> > Agile Software Development, Teaching & Coaching >>> > Mobile: +54 - 911 - 4470 - 7207 >>> > email: hernan.wilkinson(a)10Pines.com >>> > site:Â http://www.10Pines.com >>> > Address: ParaguayÂ 523, Floor 7 N, Buenos Aires, Argentina >>> > >>> > >>> > -- >>> > Johannes Rasche Hagelberger Str. 56 10965 Berlin mail >>> > johannesrasche(a)mac.com >>> > mobile +49 1577 175 04 75 >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko. >>> >> >> >> >> -- >> HernÃ¡n Wilkinson >> Agile Software Development, Teaching & Coaching >> Mobile: +54 - 911 - 4470 - 7207 >> email: hernan.wilkinson(a)10Pines.com >> site:Â http://www.10Pines.com >> Address: ParaguayÂ 523, Floor 7 N, Buenos Aires, Argentina > > > > -- > HernÃ¡n Wilkinson > Agile Software Development, Teaching & Coaching > Mobile: +54 - 911 - 4470 - 7207 > email: hernan.wilkinson(a)10Pines.com > site:Â http://www.10Pines.com > Address: ParaguayÂ 523, Floor 7 N, Buenos Aires, Argentina > -- Best regards, Igor Stasenko.

Nov. 14, 2011

Re: [Pharo-project] [Progress Report] Zinc HTTP Components

by Mariano Martinez Peck

WOW. It is an incredible amount of work. Really really necessary for making Pharo more business friendly. Thanks a lot Sven. All I wish is that you continue with it. Cheers On Mon, Nov 14, 2011 at 6:35 AM, Sven Van Caekenberghe <sven(a)beta9.be>wrote: > > On 14 Nov 2011, at 07:18, Sven Van Caekenberghe wrote: > > > On 13 Nov 2011, at 23:59, StÃ©phane Ducasse wrote: > > > >> do you know if we should merge with the latest version in 1.4? > > > > Yes we should, the code is in a good state. > > I will make an issue because we should record the exact version that got > integrated. > > I 'reopened' http://code.google.com/p/pharo/issues/detail?id=4903 > -- Mariano http://marianopeck.wordpress.com

Nov. 14, 2011

Re: [Pharo-project] Comparing a package code with current code

by Hernan Wilkinson

Here is a screenshot showing what I get... on the left panel nothing and on the right panel the code of the package... and of course, that method, #debug, is implemented in the current image. Should I open a defect? On Sun, Nov 13, 2011 at 11:39 AM, Hernan Wilkinson < hernan.wilkinson(a)10pines.com> wrote: > yeah... it does not work with this package/image version... maybe > something has changed and that is the reason... > > > On Sat, Nov 12, 2011 at 4:36 AM, Igor Stasenko <siguctua(a)gmail.com> wrote: > >> changes button always worked for me. >> >> On 12 November 2011 01:12, Johannes Rasche <johannesrasche(a)mac.com> >> wrote: >> > what else would be compared ?! >> > >> > anyway I didn't do that, so I cannot judge >> > >> > I used merge, but that may be cumbersome >> > >> > Johannes >> > >> > Am 12.11.11 00:03, schrieb Hernan Wilkinson: >> > >> > nop... it does not compare the code from the package and image... >> > It think I did this before but I don't find the way now. >> > >> > On Fri, Nov 11, 2011 at 7:51 PM, Francois Stephany >> > <tulipe.moutarde(a)gmail.com> wrote: >> >> >> >> Hi Hernan, >> >> >> >> Can't you use the 'Changes' button on the Monticello browser? >> >> >> >>> How can I see the differences between code that is in a >> >>> package and the code in an image? >> >> >> > >> > >> > >> > -- >> > HernÃ¡n Wilkinson >> > Agile Software Development, Teaching & Coaching >> > Mobile: +54 - 911 - 4470 - 7207 >> > email: hernan.wilkinson(a)10Pines.com >> > site: http://www.10Pines.com >> > Address: Paraguay 523, Floor 7 N, Buenos Aires, Argentina >> > >> > >> > -- >> > Johannes Rasche Hagelberger Str. 56 10965 Berlin mail >> johannesrasche(a)mac.com >> > mobile +49 1577 175 04 75 >> >> >> >> -- >> Best regards, >> Igor Stasenko. >> >> > > > -- > *HernÃ¡n Wilkinson > Agile Software Development, Teaching & Coaching > Mobile: +54 - 911 - 4470 - 7207 > email: hernan.wilkinson(a)10Pines.com > site: http://www.10Pines.com <http://www.10pines.com/>* > Address: Paraguay 523, Floor 7 N, Buenos Aires, Argentina > > -- *HernÃ¡n Wilkinson Agile Software Development, Teaching & Coaching Mobile: +54 - 911 - 4470 - 7207 email: hernan.wilkinson(a)10Pines.com site: http://www.10Pines.com <http://www.10pines.com/>* Address: Paraguay 523, Floor 7 N, Buenos Aires, Argentina

Nov. 14, 2011

Re: [Pharo-project] gsub like solution for Pharo/Smalltalk

by Nicolas Cellier

It might seem a bit verbose, but your example translates as aDictionary associations inject: string into: [:subst :assoc | assoc key asRegex copy: subst replacingMatchesWith: assoc value]. Nicolas 2011/11/14 Fernando Olivero <fernando.olivero(a)usi.ch>: > I dont fully understand your question, also i have no idea what #gsub does. > > do you start from a dictionary ? or a string ? it seems that you want > to create a dictionary from a particular string. > > Could you provide an example of such string, i could help you in > finding the correct messages of String/Stream to send. > > The #gsub message, seems pertinent to all Strings? or is a special > behavior for your special case? > > > Fernando > > On Mon, Nov 14, 2011 at 10:17 AM, Sven Van Caekenberghe <sven(a)beta9.be> wrote: >> >> On 14 Nov 2011, at 08:25, mail list wrote: >> >>> I have Â a dictionary of keys and values. >>> >>> I have a text string in which the keys are marked with before and ending symbols. >>> >>> In ruby to replace the key with the value in the text string is reasonably simple. Â (eg Dictionary.each { key,value | string.gsub!(key,value) } Â - or similar to this. >>> >>> While I don't mind rolling my version of this in Smalltalk, just exploring the regex code and the streams code it is not obvious where is the easiest place to start. >>> >>> If someone would put their comments on where to start I will build the functionality and put it up on squeaksource since I think it is common requirement. >>> >>> S. >> >> There is String>>#format: but there are probably other options as well. >> >> Sven >> > >

Nov. 14, 2011

Re: [Pharo-project] changes to existing class definitions

by Herby VojÄÃk

Johannes Rasche wrote: > > my question is how to add "uses: XXTrait" > > up to Pharo 1.0 I used a subclass of PasteUpMorph, > > but replacing the existing world now seems more complicated to me, > some related functionality of Squeak was removed for some reason > the > Johannes > Well, just a wild idea, not that I know exactly what are possibilities of the beast, but can't environments be used so that in certain environment the subclass PasteUpMorphWithXX of base class PasteUpMorph would be known under name #PasteUpMorph? This way you can use the subclass, you just need to initialize environment properly... -- View this message in context: http://forum.world.st/changes-to-existing-class-definitions-tp4039509p40400… Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

Nov. 14, 2011

Re: [Pharo-project] gsub like solution for Pharo/Smalltalk

by Fernando Olivero

I dont fully understand your question, also i have no idea what #gsub does. do you start from a dictionary ? or a string ? it seems that you want to create a dictionary from a particular string. Could you provide an example of such string, i could help you in finding the correct messages of String/Stream to send. The #gsub message, seems pertinent to all Strings? or is a special behavior for your special case? Fernando On Mon, Nov 14, 2011 at 10:17 AM, Sven Van Caekenberghe <sven(a)beta9.be> wrote: > > On 14 Nov 2011, at 08:25, mail list wrote: > >> I have Â a dictionary of keys and values. >> >> I have a text string in which the keys are marked with before and ending symbols. >> >> In ruby to replace the key with the value in the text string is reasonably simple. Â (eg Dictionary.each { key,value | string.gsub!(key,value) } Â - or similar to this. >> >> While I don't mind rolling my version of this in Smalltalk, just exploring the regex code and the streams code it is not obvious where is the easiest place to start. >> >> If someone would put their comments on where to start I will build the functionality and put it up on squeaksource since I think it is common requirement. >> >> S. > > There is String>>#format: but there are probably other options as well. > > Sven >

Nov. 14, 2011

Re: [Pharo-project] changes to existing class definitions

by Johannes Rasche

I need to add some additional methods to PasteUpMorph for that purpose I created a Trait my question is how to add "uses: XXTrait" up to Pharo 1.0 I used a subclass of PasteUpMorph, but replacing the existing world now seems more complicated to me, some related functionality of Squeak was removed for some reason Johannes Am 14.11.11 15:06, schrieb Sven Van Caekenberghe: > On 14 Nov 2011, at 14:43, Johannes Rasche wrote: > >> if I wanna add some methods to existing classes >> I create categories like "*packageName" >> >> but how to handle changes to class definitions? >> >> what is the recommended way to do that? >> >> I'm not sure it's good to change the category name >> >> Johannes > I don't think that is possible with Monticello. > > It also doesn't strike me as a very good idea regarding system stability. > > Can't you make a subclass ? > > Sven > >

Nov. 14, 2011

Re: [Pharo-project] changes to existing class definitions

by Sven Van Caekenberghe

On 14 Nov 2011, at 14:43, Johannes Rasche wrote: > if I wanna add some methods to existing classes > I create categories like "*packageName" > > but how to handle changes to class definitions? > > what is the recommended way to do that? > > I'm not sure it's good to change the category name > > Johannes I don't think that is possible with Monticello. It also doesn't strike me as a very good idea regarding system stability. Can't you make a subclass ? Sven

Nov. 14, 2011

[Pharo-project] changes to existing class definitions

by Johannes Rasche

if I wanna add some methods to existing classes I create categories like "*packageName" but how to handle changes to class definitions? what is the recommended way to do that? I'm not sure it's good to change the category name Johannes

Nov. 14, 2011