July 2010 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] showstopper for 1.1

by Lukas Renggli

> Ok (even if this is not really that bad than not been able to recover class definition). > do you have cycle to revert the changes? I'll try to do it later this afternoon. It really annoys me :-) > Hernan can you help there? > Stef > > >> Also the new/broken behavior of the Monticello Browser that screws up >> the ancestry when the username/password is wrong is a showstopper. >> >> Lukas >> >> On 19 July 2010 00:00, stephane ducasse <stephane.ducasse(a)free.fr> wrote: >>> HI guys >>> >>> I checked and Class definition are not logged in the changes file as well as methods removal. >>> >>> So this is clearly a doit missing and we should investigate that. >>> >>> Stef >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> >> -- >> Lukas Renggli >> www.lukas-renggli.ch >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Lukas Renggli www.lukas-renggli.ch

July 19, 2010

Re: [Pharo-project] help to update actions done in Pharo 1.1

by StÃ©phane Ducasse

On Jul 19, 2010, at 9:15 AM, Adrian Lienhard wrote: > I've added: > - native host menus for Mac to the list. > - Packages remodularization > - New help system > > What are the most important improvements/changes of 1.1 that we can point out on the website and in the announcement of the new release? general speed up and lot of improvements :) > > Cheers, > Adrian > > On Jul 18, 2010, at 11:33 , Mariano Martinez Peck wrote: > >> Hi. We are very near to release 1.1. We need help to remember all we all >> have been doing on it ;) >> >> Here is the current list: >> >> http://code.google.com/p/pharo/wiki/ActionsInPharoOneDotOne >> >> Please, feel free to add/modify actions. >> >> Cheers >> >> Mariano >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

July 19, 2010

Re: [Pharo-project] showstopper for 1.1

by StÃ©phane Ducasse

Ok (even if this is not really that bad than not been able to recover class definition). do you have cycle to revert the changes? Hernan can you help there? Stef > Also the new/broken behavior of the Monticello Browser that screws up > the ancestry when the username/password is wrong is a showstopper. > > Lukas > > On 19 July 2010 00:00, stephane ducasse <stephane.ducasse(a)free.fr> wrote: >> HI guys >> >> I checked and Class definition are not logged in the changes file as well as methods removal. >> >> So this is clearly a doit missing and we should investigate that. >> >> Stef >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Lukas Renggli > www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

July 19, 2010

Re: [Pharo-project] how do I turn off "smart" quotes in Pharo Seaside one-click image

by StÃ©phane Ducasse

Can you let us know which versions? image? you are talking about. May be the preference was not created. If this is the case create a bug entry report. Stef On Jul 19, 2010, at 3:36 AM, Randal L. Schwartz wrote: > > In Squeak, the preference pane includes a "smart quotes" setting > (defaulting on, so I turn it off immediately). > > I don't see one for Pharo. It appears to be stuck on. > > I need to turn this feature off, or my typing speed drastically reduces, > and my annoyance level is greatly increased. > > It's not under Editing (Smart Updating isn't it). > > Where's the preference? > > -- > Randal L. Schwartz - Stonehenge Consulting Services, Inc. - +1 503 777 0095 > <merlyn(a)stonehenge.com> <URL:http://www.stonehenge.com/merlyn/> > Smalltalk/Perl/Unix consulting, Technical writing, Comedy, etc. etc. > See http://methodsandmessages.vox.com/ for Smalltalk and Seaside discussion > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

July 19, 2010

Re: [Pharo-project] connection to access databases

by Tudor Girba

Hi, Thanks for all the pointers. I am now testing on Mac using the Actual driver: http://www.actualtech.com/product_access.php I managed to get it running, but now I have problems with the ODBC Pharo implementation because there seems to be no module for Mac: ODBCLibrary class>>moduleName "Return the name of the module for this library" SmalltalkImage current platformName = 'Win32' ifTrue: [ ^ 'odbc32' ]. SmalltalkImage current platformName = 'unix' ifTrue: [ ^ 'libodbc.so' ]. ^ self error: 'Don''t know the ODBC library name' Is there something to be done in this area? Cheers, Doru On 19 Jul 2010, at 01:04, GermÃ¡n Arduino wrote: > Yes, Indeed, I mean, I used a driver to access, but can't remember now > the brand, but I'm sure I not payed for it :) > > May be I used some trial version.... > > 2010/7/18 Levente Uzonyi <leves(a)elte.hu>: >> >> On Sun, 18 Jul 2010, GermÃ¡n Arduino wrote: >> >>> Not, I'm not talking of propietary software. >>> >>> I'm talking of one I used when helped Diego with the testing of the >>> odbc package. Don't remember now, but may be this >>> http://www.unixodbc.org/ ? >> >> ODBC is just an API, if you don't have a driver for yourdatabase, >> then it >> won't help. >> >> >> Levente >> >>> >>> About Mac, sorry, never touched a mac in all my life.... >>> >>> Cheers. >>> >>> >>> 2010/7/18 Levente Uzonyi <leves(a)elte.hu>: >>>> >>>> On Sun, 18 Jul 2010, GermÃ¡n Arduino wrote: >>>> >>>>> Hi Tudor: >>>>> >>>>> Is as Levente says, you must define an ODBC source on a Windows PC >>>>> (Alternatively on Unix you can use ODBC also). >>>> >>>> I don't know any free ODBC drivers for Access on un*x. I only >>>> know a >>>> driver >>>> which costs 4-5 times more than the windows OS itself :). But >>>> there's a driver for mac which costs only 30 usd if you're >>>> interested. >>>> >>>> >>>> Levente >>>> >>>>> >>>>> Some examples on: http://wiki.squeak.org/squeak/2480 >>>>> >>>>> Cheers. >>>>> GermÃ¡n. >>>>> >>>>> >>>>> 2010/7/18 Levente Uzonyi <leves(a)elte.hu>: >>>>>> >>>>>> On Sun, 18 Jul 2010, Tudor Girba wrote: >>>>>> >>>>>>> Thanks Mariano! >>>>>>> >>>>>>> Indeed, if I load ConfigurationOfFFI first, everything loads >>>>>>> well. >>>>>>> >>>>>>> I am a complete newbie in this area. Can anyone tell me what I >>>>>>> should >>>>>>> do >>>>>>> next? >>>>>>> >>>>>>> I imagine that I should connect to an Access server. If yes, >>>>>>> how would >>>>>>> I >>>>>>> do that? >>>>>>> >>>>>>> Also, do I need anything else, like a C plugin/library to get >>>>>>> the C >>>>>>> calls >>>>>>> from ODBCLibrary going? >>>>>> >>>>>> First you'll need a pc running windows. Then you have to create >>>>>> an ODBC >>>>>> Data >>>>>> Source for your Access file. Then you'll be able to create a >>>>>> connection >>>>>> to >>>>>> that datasource from your image. >>>>>> >>>>>> >>>>>> Levente >>>>>> >>>>>>> >>>>>>> Cheers, >>>>>>> Doru >>>>>>> >>>>>>> >>>>>>> On 18 Jul 2010, at 09:17, Mariano Martinez Peck wrote: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Sun, Jul 18, 2010 at 8:49 AM, Tudor Girba <tudor.girba(a)gmail.com >>>>>>>> > >>>>>>>> wrote: >>>>>>>> Hi, >>>>>>>> >>>>>>>> I tried loading it, but I get : >>>>>>>> "This package depends on the following classes: >>>>>>>> ExternalLibrary >>>>>>>> ExternalStructure" >>>>>>>> >>>>>>>> Can anyone tell me where to find these from? >>>>>>>> >>>>>>>> This means that you need Metacello ;) >>>>>>>> >>>>>>>> Those classes are from FFI, a pre-requisite for ODBC to work. >>>>>>>> Maybe there is a ConfigurationOfODBC somewhere... >>>>>>>> >>>>>>>> For the moment, I recommend you to install FFI using the >>>>>>>> ConfigurationOfFFI. >>>>>>>> >>>>>>>> Cheers >>>>>>>> >>>>>>>> Mariano >>>>>>>> >>>>>>>> >>>>>>>> Also, are there eternal prerequisites to work with ODBC? >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Doru >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 18 Jul 2010, at 00:35, Levente Uzonyi wrote: >>>>>>>> >>>>>>>> On Sat, 17 Jul 2010, Tudor Girba wrote: >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> Is there a way to connect to a Microsoft Access database from >>>>>>>> Pharo? >>>>>>>> >>>>>>>> Yes, with ODBC. >>>>>>>> >>>>>>>> >>>>>>>> Levente >>>>>>>> >>>>>>>> >>>>>>>> I have an mdb file of 300 Mb that I would need to analyze. >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Doru >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> www.tudorgirba.com >>>>>>>> >>>>>>>> "Next time you see your life passing by, say 'hi' and get to >>>>>>>> know >>>>>>>> her." >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Pharo-project mailing list >>>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Pharo-project mailing list >>>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>>>> >>>>>>>> -- >>>>>>>> www.tudorgirba.com >>>>>>>> >>>>>>>> "Speaking louder won't make the point worthier." >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Pharo-project mailing list >>>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Pharo-project mailing list >>>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>>> >>>>>>> -- >>>>>>> www.tudorgirba.com >>>>>>> >>>>>>> "When people care, great things can happen." >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Pharo-project mailing list >>>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>> >>>>>> _______________________________________________ >>>>>> Pharo-project mailing list >>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >>>>> project >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> >>> -- >>> ================================================= >>> GermÃ¡n S. Arduino <gsa @ arsol.net> Twitter: garduino >>> Arduino Software & Web Hosting http://www.arduinosoftware.com >>> PasswordsPro http://www.passwordspro.com >>> ================================================= >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project -- www.tudorgirba.com "Every thing should have the right to be different."

July 19, 2010

[Pharo-project] Deployment on Pharo

by nullPointer

Excuse me for my poor english. I want implement a mechanism of deploy in Pharo. The objetive is obtain one file with VM and Image mergeds. I believe than in MACOS is easy, only is needed put the image file into the "VM" folder and create a zip with a link to APPs folder. In Windows the idea is merge VM and image in one file and create a classical windows installer. Exists some previous work do it for deployment? I see for example images "One click" for mac. Regards -- View this message in context: http://forum.world.st/Deployment-on-Pharo-tp2293677p2293677.html Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

July 19, 2010

Re: [Pharo-project] Sugar theme for Pharo Smalltalk

by Hilaire Fernandes

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 One indication I need: how can I change the automatic color scheme on dialog and window, I want selected and unselected windows/dialogs with the same canvas color. Hilaire Le 18/07/2010 22:28, Gary Chambers a Ã©crit : > No problem. I can review/help. > > Regards, Gary -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkxECxQACgkQSAvrR6lz6PTR+ACfb7yEMjgNQtEPXpJqzylAfC6y j0YAn0t+MouSUH6Mj0f6n11mENj56JK0 =8RFR -----END PGP SIGNATURE-----

July 19, 2010

[Pharo-project] Fwd: [Vm-dev] [ANN] SqueakSSL - a platform interface for SSL/TLS

by Geoffroy Couprie

Here are some great news :) ---------- Forwarded message ---------- From: Andreas Raab <andreas.raab(a)gmx.de> Date: Mon, Jul 19, 2010 at 8:13 AM Subject: [Vm-dev] [ANN] SqueakSSL - a platform interface for SSL/TLS To: The general-purpose Squeak developers list < squeak-dev(a)lists.squeakfoundation.org>, Squeak Virtual Machine Development Discussion <vm-dev(a)lists.squeakfoundation.org> Folks - Since the weekend is over I've decided to release what I got so far and consequently I'm happy to announce the availability of a new interface to the platform SSL/TLS facilities for Squeak. SqueakSSL is a plugin-based approach which utilizes the platform implementation; currently the SCHANNEL SSPI on Windows and OpenSSL on Unix. To use SqueakSSL you need the following pieces: 1) The plugin for your platform. For Windows, you can download the plugin from http://squeakvm.org/win32/release/SqueakSSL.zip For Unix you'll have to compile your own; I'm attaching the relevant part of the platforms tree. Mac support is currently not provided but the OpenSSL based version can probably be adapted for Macs. 2) The SqueakSSL source code and tests. All of this can be found at http://www.squeaksource.com/SqueakSSL.html You need SqueakSSL-Core for the code and SqueakSSL-Tests for the unit tests (SqueakSSL-Plugin is the plugin source which you don't need and which we'll probably push into VMMaker). Once you've downloaded and installed everything correctly, you should be able to try SqueakSSL via the google example, which makes a query to encrypted.google.com: SqueakSSL google: 'Squeak'. If the query fails your plugin is probably not installed correctly (it seems unlikely that Google's cert has an issue :-) 3) For further tests (incl. the unit tests) you will need to provide a server certificate that can be used by SqueakSSL. On Unix you can do that using the openssl command line tools and once you've generated your cert, you can tell SqueakSSLTest to use the cert. On Windows the process is a bit more involved - you need to have a valid cert AND have it installed in the local certificate store (a description can be found at http://support.microsoft.com/kb/816794 but make sure you install it in your *user* account not the computer account). Once you have the cert installed, you can run the unit tests which should now succeed. Obviously, this is an early release and there's plenty of work that remains to be done, so help is welcome. However, it is starting to become useful and consequently I'm intending to update WebServer and WebClient soon for HTTPS support. Cheers, - Andreas

July 19, 2010

Re: [Pharo-project] help to update actions done in Pharo 1.1

by Adrian Lienhard

I've added: - native host menus for Mac to the list. - Packages remodularization - New help system What are the most important improvements/changes of 1.1 that we can point out on the website and in the announcement of the new release? Cheers, Adrian On Jul 18, 2010, at 11:33 , Mariano Martinez Peck wrote: > Hi. We are very near to release 1.1. We need help to remember all we all > have been doing on it ;) > > Here is the current list: > > http://code.google.com/p/pharo/wiki/ActionsInPharoOneDotOne > > Please, feel free to add/modify actions. > > Cheers > > Mariano > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

July 19, 2010

[Pharo-project] Markup Builder in Smalltalk Alpha 2.0

by Sudhakar Krishnamachari

Usable first alpha version with refactoring fixes to make it a cleaner base. http://skrishnamachari.wordpress.com/2010/07/19/markupbuilder-alpha-2-0/ http://squeaksource.com/PharoGoodies/MarkupBuilder-Skrish.alpha.2.0.mcz HtmlBuilderTableWidget is fairly fleshed out as an example of component that is flexible and extensible with a plugin system Working on Forms to make it like RAILS.. Integrated MarkupBuilder with Seaside examples in Tests.. * Read through MarkupBuilder-Tests for all reqd examples * Launch Seaside and register all the subclasses of HtmlBuilderComponent (class>>initialize) to see the examples live on browser with code and source from http://localhost:8080/seaside Comments are hugely welcome to make it more useable/ core for as many as can use it.. and reach the release 1.0 sooner.

July 19, 2010