May 2010 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by StÃ©phane Ducasse

:) But yes if people send code for that it will be the first item for 1.2 :) We want more :) Have source of published pharo version in a large database :) Stef On May 13, 2010, at 10:01 AM, Igor Stasenko wrote: > Basically, i would remove the old cruft in SourceFileArray > and all paranoia about reaching size limit, > and leave only a fresh implementation (ExpandedSourceFileArray). > I don't see why someone would want to revert to old behavior. > > On 13 May 2010 10:56, Igor Stasenko <siguctua(a)gmail.com> wrote: >> On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >>> oops >>> Igor do you have more information? >>> how do we do that? >>> >> just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. >> >> As far as i can tell, everything else should work fine after that. >> This is not my contribution , so i don't know all nuances, sorry. >> >> I just made things which allow source pointers > 32Mb to be stored in >> method trailers, while others put this in use in various places :) >> >>> Stef >>> >>>> I found this message in CompiledMethod, which should be: >>>> >>>> CompiledMethod>>checkOKToAdd: size at: filePosition >>>> "Issue several warnings if the end of the changes file is approaching >>>> a fixed size limit, and finally halt with an error if the limit is reached." >>>> >>>> ^ SourceFiles checkOKToAdd: size at: filePosition >>>> >>>> looks like Pharo didn't integrated this method. >>>> >>>> also, make sure you using a proper source file array.. >>>> >>>> SourceFiles class == ExpandedSourceFileArray >>> >>> >>> >>> >>>> >>>> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>>>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>>>> Hi. I have the following error: >>>>>> >>>>>> 'You have reached the size limit of the changes file. >>>>>> You must take action now to reduce it. >>>>>> Close this error. Do not attempt to proceed.' >>>>>> >>>>>> I know this is a known error, but I thought that with Igor's new method >>>>>> trailer this was fixed. >>>>>> >>>>> >>>>> Seems like a leftovers of old stuff, with precautions once you >>>>> reaching the size limit. >>>>> >>>>> Close this error. And attempt to proceed. >>>>> >>>>> :) >>>>> >>>>>> Tested in 11355 >>>>>> >>>>>> Thanks >>>>>> >>>>>> Mariano >>>>>> >>>>>> _______________________________________________ >>>>>> Pharo-project mailing list >>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Best regards, >>>>> Igor Stasenko AKA sig. >>>>> >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Igor Stasenko AKA sig. >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko AKA sig. >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by StÃ©phane Ducasse

ok I thought that we should change that openSourceFiles self imageName = LastImageName ifFalse: ["Reset the author full name to blank when the image gets moved" LastImageName := self imageName. Author fullName: '']. self checkAndOpenSourcesAndChanges. StandardSourceFileArray install Stef On May 13, 2010, at 9:56 AM, Igor Stasenko wrote: > On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >> oops >> Igor do you have more information? >> how do we do that? >> > just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. > > As far as i can tell, everything else should work fine after that. > This is not my contribution , so i don't know all nuances, sorry. > > I just made things which allow source pointers > 32Mb to be stored in > method trailers, while others put this in use in various places :) > >> Stef >> >>> I found this message in CompiledMethod, which should be: >>> >>> CompiledMethod>>checkOKToAdd: size at: filePosition >>> "Issue several warnings if the end of the changes file is approaching >>> a fixed size limit, and finally halt with an error if the limit is reached." >>> >>> ^ SourceFiles checkOKToAdd: size at: filePosition >>> >>> looks like Pharo didn't integrated this method. >>> >>> also, make sure you using a proper source file array.. >>> >>> SourceFiles class == ExpandedSourceFileArray >> >> >> >> >>> >>> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>>> Hi. I have the following error: >>>>> >>>>> 'You have reached the size limit of the changes file. >>>>> You must take action now to reduce it. >>>>> Close this error. Do not attempt to proceed.' >>>>> >>>>> I know this is a known error, but I thought that with Igor's new method >>>>> trailer this was fixed. >>>>> >>>> >>>> Seems like a leftovers of old stuff, with precautions once you >>>> reaching the size limit. >>>> >>>> Close this error. And attempt to proceed. >>>> >>>> :) >>>> >>>>> Tested in 11355 >>>>> >>>>> Thanks >>>>> >>>>> Mariano >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Igor Stasenko AKA sig. >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by Igor Stasenko

Basically, i would remove the old cruft in SourceFileArray and all paranoia about reaching size limit, and leave only a fresh implementation (ExpandedSourceFileArray). I don't see why someone would want to revert to old behavior. On 13 May 2010 10:56, Igor Stasenko <siguctua(a)gmail.com> wrote: > On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >> oops >> Igor do you have more information? >> how do we do that? >> > just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. > > As far as i can tell, everything else should work fine after that. > This is not my contribution , so i don't know all nuances, sorry. > > I just made things which allow source pointers > 32Mb to be stored in > method trailers, while others put this in use in various places :) > >> Stef >> >>> I found this message in Â CompiledMethod, which should be: >>> >>> CompiledMethod>>checkOKToAdd: size at: filePosition >>> Â Â Â "Issue several warnings if the end of the changes file is approaching >>> Â Â Â a fixed size limit, and finally halt with an error if the limit is reached." >>> >>> Â Â Â ^ SourceFiles checkOKToAdd: size at: filePosition >>> >>> looks like Pharo didn't integrated this method. >>> >>> also, make sure you using a proper Â source file array.. >>> >>> SourceFiles class == ExpandedSourceFileArray >> >> >> >> >>> >>> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>>> Hi. I have the following error: >>>>> >>>>> Â 'You have reached the size limit of the changes file. >>>>> You must take action now to reduce it. >>>>> Close this error. Â Do not attempt to proceed.' >>>>> >>>>> I know this is a known error, but I thought that with Igor's new method >>>>> trailer this was fixed. >>>>> >>>> >>>> Seems like a leftovers of old stuff, with precautions once you >>>> reaching the size limit. >>>> >>>> Close this error. Â And attempt to proceed. >>>> >>>> :) >>>> >>>>> Tested in 11355 >>>>> >>>>> Thanks >>>>> >>>>> Mariano >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Igor Stasenko AKA sig. >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > -- Best regards, Igor Stasenko AKA sig.

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by Igor Stasenko

On 13 May 2010 10:33, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > oops > Igor do you have more information? > how do we do that? > just replace CompiledMethod>>checkOKToAdd:at:, or take it from trunk. As far as i can tell, everything else should work fine after that. This is not my contribution , so i don't know all nuances, sorry. I just made things which allow source pointers > 32Mb to be stored in method trailers, while others put this in use in various places :) > Stef > >> I found this message in Â CompiledMethod, which should be: >> >> CompiledMethod>>checkOKToAdd: size at: filePosition >> Â Â Â "Issue several warnings if the end of the changes file is approaching >> Â Â Â a fixed size limit, and finally halt with an error if the limit is reached." >> >> Â Â Â ^ SourceFiles checkOKToAdd: size at: filePosition >> >> looks like Pharo didn't integrated this method. >> >> also, make sure you using a proper Â source file array.. >> >> SourceFiles class == ExpandedSourceFileArray > > > > >> >> On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >>> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>>> Hi. I have the following error: >>>> >>>> Â 'You have reached the size limit of the changes file. >>>> You must take action now to reduce it. >>>> Close this error. Â Do not attempt to proceed.' >>>> >>>> I know this is a known error, but I thought that with Igor's new method >>>> trailer this was fixed. >>>> >>> >>> Seems like a leftovers of old stuff, with precautions once you >>> reaching the size limit. >>> >>> Close this error. Â And attempt to proceed. >>> >>> :) >>> >>>> Tested in 11355 >>>> >>>> Thanks >>>> >>>> Mariano >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko AKA sig. >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Best regards, Igor Stasenko AKA sig.

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

On windows I do not know if OSProcess is working. I tested on mac. Stef On May 12, 2010, at 11:54 PM, Andrei Stebakov wrote: > Installation worked well. > Something is still missing (docs for sure!) when I type "OSProcess thisOSProcess" and evaluate/print it it says "a WindowsProcess with pid nil". > > > 2010/5/12 Mariano Martinez Peck <marianopeck(a)gmail.com> > It seems the wiki is outdated. Please try this to install it: > > Gofer new > squeaksource: 'Coral'; > package: 'LoadCoral'; > load. > > (Smalltalk at: #CoralLoader) load. > > > DISCLAIMER: I have no idea of it is working or not. It just load. And I am not even sure if loads completely correct > > Cheers > > mariano > > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Right, I just didn't get it on the first read... > > 2010/5/12 Gabriel Brunstein <gaboto(a)gmail.com> > As I read there, Coral IS A PACKAGE FOR PHARO! so you would not be using another tool. > I don't know which is the state of Coral, if it works or not (based on the previous mail of Stephane) > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Thank you, I'll give it a try. See, maybe my philosophy is wrong, but I'd rather get better at one tool (where it's possible) than learn multiple different tools to do similar tasks. > I think Pharo has a potential to be if not a Swiss army knife like Python, but a very useful language for any programming tasks (scripting is one of them). > So far, as a newbie, I like what I see in Pharo and having a blast learning it. I am so thrilled, that just a thought that it could do scripting sends shivers down my spine :) > > 2010/5/12 Gabriel Brunstein <gaboto(a)gmail.com> > > What about coral? > http://scg.unibe.ch/wiki/projects/bachelorsprojects/coral > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Is it possible to start Pharo headless and execute some command (say to get some info from a web page)? > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

Do not use installer CoralLoader load should work. Stef On May 12, 2010, at 11:10 PM, Andrei Stebakov wrote: > Was trying to install Coral with "ScriptLoader new installer ss project: 'Coral'; install: 'LoadCoral'.df" command. > > Gave me a MessageNotUnderstood along the process: > > MessageNotUnderstood: Installer class>>squeaksource > Installer class(Object)>>doesNotUnderstand: #squeaksource > [] in Installer class>>doesNotUnderstand: #squeaksource > IdentityDictionary(Dictionary)>>at:ifAbsent: > Installer class>>doesNotUnderstand: #squeaksource > Installer class>>ss > UndefinedObject>>DoIt > Compiler>>evaluate:in:to:notifying:ifFail:logged: > [] in TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > BlockClosure>>on:do: > TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > TextMorphForShoutEditor(ParagraphEditor)>>doIt > [] in TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>terminateAndInitializeAround: > TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(TextMorphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(ParagraphEditor)>>keystroke: > TextMorphForShoutEditor(TextMorphEditor)>>keystroke: > [] in [] in TextMorphForShout(TextMorph)>>keyStroke: > TextMorphForShout(TextMorph)>>handleInteraction: > > Installer class(Object)>>doesNotUnderstand: #squeaksource > [] in Installer class>>doesNotUnderstand: #squeaksource > IdentityDictionary(Dictionary)>>at:ifAbsent: > Installer class>>doesNotUnderstand: #squeaksource > Installer class>>ss > UndefinedObject>>DoIt > Compiler>>evaluate:in:to:notifying:ifFail:logged: > [] in TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > BlockClosure>>on:do: > TextMorphForShoutEditor(ParagraphEditor)>>evaluateSelection > TextMorphForShoutEditor(ParagraphEditor)>>doIt > [] in TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>terminateAndInitializeAround: > TextMorphForShoutEditor(ParagraphEditor)>>doIt: > TextMorphForShoutEditor(ParagraphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(TextMorphEditor)>>dispatchOnKeyEvent:with: > TextMorphForShoutEditor(ParagraphEditor)>>keystroke: > TextMorphForShoutEditor(TextMorphEditor)>>keystroke: > [] in [] in TextMorphForShout(TextMorph)>>keyStroke: > TextMorphForShout(TextMorph)>>handleInteraction: > doesNotUnderstand: aMessage > > Oh well, probably some dependencies are missing... > > > 2010/5/12 Gabriel Brunstein <gaboto(a)gmail.com> > What about coral? > http://scg.unibe.ch/wiki/projects/bachelorsprojects/coral > > 2010/5/12 Andrei Stebakov <lispercat(a)gmail.com> > Is it possible to start Pharo headless and execute some command (say to get some info from a web page)? > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

On May 12, 2010, at 11:08 PM, Gabriel Brunstein wrote: > As I read there, Coral IS A PACKAGE FOR PHARO! so you would not be using another tool. > I don't know which is the state of Coral, if it works or not (based on the previous mail of Stephane) it works but on my machine. So you have to create sh script by end to laucnh pharo on the command line.... But it works. Stef

May 13, 2010

Re: [Pharo-project] Scripting with Pharo?

by StÃ©phane Ducasse

On May 12, 2010, at 10:55 PM, Andrei Stebakov wrote: > Thank you, I'll give it a try. See, maybe my philosophy is wrong, but I'd rather get better at one tool (where it's possible) than learn multiple different tools to do similar tasks. > I think Pharo has a potential to be if not a Swiss army knife like Python, but a very useful language for any programming tasks (scripting is one of them). > So far, as a newbie, I like what I see in Pharo and having a blast learning it. I am so thrilled, that just a thought that it could do scripting sends shivers down my spine :) Yes I would love to have what you describe. This is why I started to - define a cool scripting syntax - it works - play with sh script to have the possibility to run script in headless or with debugger on problem. So if you want to have a look (but this is preliminary). Load CoralLoader and do CoralLoader load and you should have a look at the comments but this is a bit the mess. If you want to help there is space for improvement. Stef

May 13, 2010

Re: [Pharo-project] Problem in Pharo 1.1 (Igor?) : You have reached the size limit of the changes file.

by StÃ©phane Ducasse

oops Igor do you have more information? how do we do that? Stef > I found this message in CompiledMethod, which should be: > > CompiledMethod>>checkOKToAdd: size at: filePosition > "Issue several warnings if the end of the changes file is approaching > a fixed size limit, and finally halt with an error if the limit is reached." > > ^ SourceFiles checkOKToAdd: size at: filePosition > > looks like Pharo didn't integrated this method. > > also, make sure you using a proper source file array.. > > SourceFiles class == ExpandedSourceFileArray > > On 13 May 2010 03:10, Igor Stasenko <siguctua(a)gmail.com> wrote: >> 2010/5/13 Mariano Martinez Peck <marianopeck(a)gmail.com>: >>> Hi. I have the following error: >>> >>> 'You have reached the size limit of the changes file. >>> You must take action now to reduce it. >>> Close this error. Do not attempt to proceed.' >>> >>> I know this is a known error, but I thought that with Igor's new method >>> trailer this was fixed. >>> >> >> Seems like a leftovers of old stuff, with precautions once you >> reaching the size limit. >> >> Close this error. And attempt to proceed. >> >> :) >> >>> Tested in 11355 >>> >>> Thanks >>> >>> Mariano >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko AKA sig. >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010

Re: [Pharo-project] VMs for Pharo 1.1

by StÃ©phane Ducasse

+1 On May 12, 2010, at 11:49 PM, Bryce Kampjes wrote: > On Wed, 2010-05-12 at 10:23 -0400, Schwab,Wilhelm K wrote: >> Just to stir up the hornets' nest (with the best of intentions), last summer, Eliot had suggested that December 2009 would see a big release. In fairness, let he who has never slipped a release date cast the first stone :) Knowing how target dates can be, I was not upset to see it pass without VW-crushing byte code speeds for us. However, more recently, Bryce posted something that appeared to question whether the Cog code would be released in the open. That was a little disturbing :( >> >> Hopefully someone in the know can give us lots of good news?? > > Something was posted about the possibility of Coq being posted into the > open but not by me. I did reply to that post. I've no idea what the > current situation is with Coq or it's release. > > My hope is Coq is successful, and of course Exupery is at least as > successful. The community is best served by at least one project > succeeding and preferably both. > > Bryce > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

May 13, 2010