December 2010 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Issue 3495 in pharo: Cannot copy text of System -> About

by pharo＠googlecode.com

Updates: Status: Fixed Comment #2 on issue 3495 by aplantec: Cannot copy text of System -> About http://code.google.com/p/pharo/issues/detail?id=3495 Fixed Now, no special case anymore concerning which commands are allowed or not (so copy/past should work and no need for #handleDisabledKey: anymore). But text modifying is allowed only if the textmorph editview is enabled. SLICE-Issue-3495-Cannot-copy-text-of-System---About

Dec. 30, 2010

Re: [Pharo-project] Issue 3485 in pharo: VMMaker does not load on Pharo 1.2

by Eliot Miranda

On Wed, Dec 29, 2010 at 1:51 AM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr > wrote: > > > > The documented format is: > > > > Timestampstrings can be of the form: > > <authorname><date><time>. > > <authorname><date> > > <date><time> > > <date><time><authorname> > > <date><authorname> > > <historical> > > > > > > Says /who/? When I created all these timestamps to document a > refactoring change there was no documented restriction on timestamps I could > see. Why impose restrictions which have little value? Why needlessly break > compatibility? That timestamp *contains useful information*. Why ban it? > > > > If you *want* VMMaker to load in Pharo you need to ensure that Pharo > supports the timestamps *that exist* not the timestamps you want to impose > on the community. > > Eliot we do not impose anything to the community. Please do not bash us we > have enough to do without that! > Steph, /I'm/ not bashing. I got bashed. Suddenly the comments I'd put in VMMaker were to be banned by Pharo. Look, the timestamp syntax if any, is defined by Utilities class>>changeStamp, along with the implicit restriction that the changeStamp can't contain an exclamation point, or it'll break parsing. Utilities class>>changeStamp is essentially anything followed by date and time, because there are /no/ restrictions on what one sets the Author initials to be (some people use full name, some people use initials, some people use put other stuff in there, but it's free apart from the $!). So to parse date and time one has to start at the end of the timestamp, go back two spaces and parse from there (ooh, difficult ;) ). There's no need for anything else. Why make life difficult for the community by imposing syntax when none existed before? All you'll do is make work and frustrate people. Is Pharo about helping or hindering? I think it's about helping, but the above syntax restrictions don't feel like that. KISS, right? If you want to find the date or time in a timestamp start at the end, and leave the beginning free from interpretation. 2Â¢ > Apparently the code was like that and people (may be johan) started to make > sense out of it. > > Stef >

Dec. 29, 2010

Re: [Pharo-project] How I can do SWF files playing in pharo?

by Sean P. DeNigris

Sean P. DeNigris wrote: > > I've started digging the code out of Sophie. > I wrote a proof of concept that plays QuickTime movies (including Flash movies if you have Perian installed). It works in Squeak 4.1 on Mac only right now. It also works with minimal changes in Pharo 1.1.1, but I don't have time to split out the platform-dependent parts right now. To check it out: * in Pharo 1.1.1 1. load FFI Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfFFI'; load. ((Smalltalk at: #ConfigurationOfFFI) project latestVersion) load. 2. allow underscore assignments in settings 3. load the player with "Gofer new squeaksource: 'SophieGoldDig'; package: 'SpdQT'; load." 4. evaluate: aURI := URI fromString: 'file:///path/to/aQuickTimeMovie.flv'. manager := SophieResourceManagerFolderPackage new. resource := SophieResource basedOn: manager. resource fileURI: aURI. movie := QuickTimeMovie new. movie resource: resource. movie openMovieFromURI: aURI. movie play. "movie stopMovieQT." 5. manually remove the isFinalizationSupported checks when the two errors appear * or, load it in Squeak per the discussion at http://forum.world.st/Playing-Flash-movies-in-image-td3167383.html Sean -- View this message in context: http://forum.world.st/How-I-can-do-SWF-files-playing-in-pharo-tp3161269p316… Sent from the Pharo Smalltalk mailing list archive at Nabble.com.

Dec. 29, 2010

Re: [Pharo-project] Issue 3393 in pharo: Better support of configuration dependencies in Monticello Browser

by pharo＠googlecode.com

Comment #1 on issue 3393 by alexandre.bergel: Better support of configuration dependencies in Monticello Browser http://code.google.com/p/pharo/issues/detail?id=3393 Getting the name of packages from a configuration is now much simpler (Thanks Mariano for the tip): configurationClass project currentVersion packages. It also remove an annoying problem that recursive packages were returned, which was a source of problem. I am now using this extension to produce the version release of Mondrian. It works well :-) New version in the inbox : MonticelloGUI-AlexandreBergel.84 Stef, should I remove the former version, MonticelloGUI-AlexandreBergel.83 ? Dale, can you give a look at this version?

Dec. 29, 2010

Re: [Pharo-project] Diagram Tool

by Mariano Martinez Peck

Tony, it is not exactly the same but did you know about Dr Geo II ? http://community.ofset.org/index.php/DrGeo cheers mariano On Wed, Dec 29, 2010 at 11:18 PM, Tony Fleig <tony.fleig(a)gmail.com> wrote: > I've been wishing for a while that Hotdraw would reappear in Smalltalk... > > http://st-www.cs.illinois.edu/users/brant/HotDraw/HotDraw.html > http://c2.com/cgi/wiki?HotDraw > http://sourceforge.net/projects/jhotdraw/ > > TF > >

Dec. 29, 2010

Re: [Pharo-project] Diagram Tool

by Tony Fleig

I've been wishing for a while that Hotdraw would reappear in Smalltalk... http://st-www.cs.illinois.edu/users/brant/HotDraw/HotDraw.html http://c2.com/cgi/wiki?HotDraw http://sourceforge.net/projects/jhotdraw/ TF

Dec. 29, 2010

Re: [Pharo-project] Issue 3495 in pharo: Cannot copy text of System -> About

by pharo＠googlecode.com

Comment #1 on issue 3495 by aplantec: Cannot copy text of System -> About http://code.google.com/p/pharo/issues/detail?id=3495 This is because of TextEditor>>handleDisabledKey: which does nothing in 1.2. One can retrieve easily some of the commands that were available in 1.1 but not all of them. This is because the interface of the corresponding methods has changed (I don't know why and when). I will provide a fix

Dec. 29, 2010

Re: [Pharo-project] midi programming

by Schwab,Wilhelm K

I managed to get that going several years ago in Squeak - 3.6 IIRC. I ran it on Windows. My focus was probably more on receiving than sending?? I was able to reach a point that notes on my piano were detected by Squeak. These things are not high priority for Pharo, but I for one would greatly enjoy seeing it work. With some digging, I might be able to put my hands on an image in which I had it working. With more digging and some luck, I might be able to find the computer side of the equation in working order. Being able to use Linux would be a plus. Good luck! Bill ________________________________________ From: pharo-project-bounces(a)lists.gforge.inria.fr [pharo-project-bounces(a)lists.gforge.inria.fr] On Behalf Of Olivier Auverlot [olivier.auverlot(a)gmail.com] Sent: Wednesday, December 29, 2010 3:45 PM To: Pharo Development Subject: [Pharo-project] midi programming Hi How to communicate with MIDI musical instruments ? I need to send and receive MIDI messages. Thank you for your advice or ideas :) Best regards Olivier www.auverlot.fr<http://www.auverlot.fr>

Dec. 29, 2010

[Pharo-project] midi programming

by Olivier Auverlot

Hi How tocommunicatewithMIDI musicalinstruments ? Ineedto sendandreceiveMIDI messages. Thank youfor youradviceorideas :) Best regards Olivier www.auverlot.fr

Dec. 29, 2010

[Pharo-project] Issue 3495 in pharo: Cannot copy text of System -> About

by pharo＠googlecode.com

Status: Accepted Owner: marianopeck CC: aplantec Labels: Milestone-1.2 New issue 3495 by marianopeck: Cannot copy text of System -> About http://code.google.com/p/pharo/issues/detail?id=3495 If I open System -> About, and I try to copy (cmd + c) a selected text, nothing happens. It doesnt copy the text. Right button doesn't seem to work neither. Pharo core version: 12288

Dec. 29, 2010