October 2010 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Cmd-t in OB?

by Alexandre Bergel

> ConfigurationOfOmnibrowser project load@*%$LatestCode better in my opinion: ConfigurationOfOmnibrowser loadLastVersion As a metathough, I think we need a unification of how Configuration are defined and used. We have loadDefault in Moose. I often do a ConfigurationOfXX project lastVersion load. You can directly load the baseline. I know this has been discussed many times. But we really need to come up with a simple and efficient way to use configuration. I would also like to have ConfigurationOfXX forEachVersionsLoadAndDo: [:v | ... ], versionsSelect: [:v | ... ], ... Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by Lukas Renggli

> Anyway, for me this is not complicated. It is just one rule: "if you don't > define a version, Metacello will take the last one" > Since you read the Metacello tutorial I guess, you know a baseline should > not define versions. Thus, if you try to load a baseline, it will have no > version defined. Then, all the latest ones will be loaded. Is this that > complicated? I want to script it. And I don't want to figure out the baseline name myself. So yes, it is too complicated. Lukas -- Lukas Renggli www.lukas-renggli.ch

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by Mariano Martinez Peck

On Fri, Oct 8, 2010 at 3:46 PM, Lukas Renggli <renggli(a)gmail.com> wrote: > > Example: (ConfigurationOfOmnibrowser project version: '1.2-baseline') > load > > I know, but I don't remember. It is far too complicated. > > 1) Nobody makes you use Metacello. If you don't want, don't use it 2) We know this is complicated and this is why we have discussing a lot since the last months, and this is why Dale will integrate #stableVersion, #bleedingEdge, etc 3) This is why there is a FAQ and a website. To persist the things your brain cannot. Anyway, for me this is not complicated. It is just one rule: "if you don't define a version, Metacello will take the last one" Since you read the Metacello tutorial I guess, you know a baseline should not define versions. Thus, if you try to load a baseline, it will have no version defined. Then, all the latest ones will be loaded. Is this that complicated? Cheers Mariano > Why not > > ConfigurationOfOmnibrowser project load@*%$LatestCode > > ? > > Lukas > > -- > Lukas Renggli > www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Oct. 8, 2010

[Pharo-project] Seaside and KomHttpServer in Pharo 1.2

by Torsten Bergmann

>What do you do to test your newly converted Seaside apps? Have you >automated it, or is just a matter of trying everything yourself? Since the app itself is in it's current state not very usefull there are no tests as you may expect to test the app itself (beside a few unit tests) Mainly I test if it is possible to load the whole stuff using Monticello: - seaside in its current version - external webbrowser/ffi - the jquerywidgtbox project on the recent Pharo version and then see if it is possible to: - start and open the app in the browser directly from the image (=> FFI and external browser are working) - have it started as a seaside root (=> if something is displayed) - click around Mostly this is enough to see if something is badly broken. So yes, currently it is more a manual test and more oriented towards if Metacello configs fit together. For instance yesterday in Pharo 1.2 the WebBrowser class was deleted and therefore the whole bootstrap process was broken since MetaSource was not loadable via configuration (see the discussion on the pharo list) My idea is to have a simple web app that demonstrates how one can setup various pieces (seaside, jqeurywidgets, metacello, ...) and that is simply installable by a small gofer script. Bye T. -- GMX DSL Doppel-Flat ab 19,99 €/mtl.! Jetzt auch mit gratis Notebook-Flat! http://portal.gmx.net/de/go/dsl

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by Lukas Renggli

> Example: (ConfigurationOfOmnibrowser project version: '1.2-baseline') load I know, but I don't remember. It is far too complicated. Why not ConfigurationOfOmnibrowser project load@*%$LatestCode ? Lukas -- Lukas Renggli www.lukas-renggli.ch

Oct. 8, 2010

Re: [Pharo-project] 12186 image quit problem

by Levente Uzonyi

On Fri, 8 Oct 2010, Schwab,Wilhelm K wrote: > That's good to know. It probably should be a lot easier than that. At least in the Windows vm, there is/was a debug menu (part of the vm's system menu) that would dump the stack for the active process; I hacked it to dump all of them rather than just one, fixed printAllStacks() along the way, and found my problem. Think of an end user machine; you don't want to have to, or might not be able to, install development tools just to get this type of basic information. It might simply be a way of ruling out problems, but it could be very important. It's a lot easier than that. On windows just select the appropriate menu item "Dump all processes" instead of "Dump call stack". On un*x you can send SIGUSR1 to the process of the VM to make it print all stacks. IIRC Cog uses this signal for another purpose, so it doesn't work with Cog. What was the problem with printAllStacks() that you had to fix? Levente > > > ________________________________________ > From: pharo-project-bounces(a)lists.gforge.inria.fr [pharo-project-bounces(a)lists.gforge.inria.fr] On Behalf Of Adrian Lienhard [adi(a)netstyle.ch] > Sent: Friday, October 08, 2010 8:21 AM > To: Pharo-project(a)lists.gforge.inria.fr > Subject: Re: [Pharo-project] 12186 image quit problem > > You can attach gdb to the VM and then call printAllStacks(). > > HTH, > Adrian > > On Oct 8, 2010, at 14:07 , Schwab,Wilhelm K wrote: > >> Do you have access to anything that will dump the callstacks for "all" processes? One of my first encounters with the Squeak update streams was trying to provide patches to the dump code... Similar features appeared years later, I suspect unrelated to my efforts. What I did was hack the VM such that the dump (on the vm menu) gave all (non-dead IIRC) processes rather than just that for the active process; for it to be readable required some changes to when the dump adds a line feed. >> >> Seeing which threads are waiting on semaphores wrapped in critical sections can be a huge help in finding deadlocks. Get it to lock up, then ask the vm for the dump and look for the offenders. If we don't have this, we should. >> >> Bill >> >> >> >> ________________________________________ >> From: pharo-project-bounces(a)lists.gforge.inria.fr [pharo-project-bounces(a)lists.gforge.inria.fr] On Behalf Of Alexander LazareviÄ [laza(a)blobworks.com] >> Sent: Friday, October 08, 2010 5:06 AM >> To: Pharo-project(a)lists.gforge.inria.fr >> Subject: Re: [Pharo-project] 12186 image quit problem >> >> Just when I was about to test drive Torstens configuration of >> ExternalWebBrowser, the image hangs somewhere while loading. I'm able >> to abort it and find myself in some ensure block of an crticial >> section of WeakArray finalization?! Trying to quit just hangs the >> image for good. >> BTW, this is on Windows. >> >> Alex >> >> 2010/10/8 Pavel Krivanek <pavel.krivanek(a)gmail.com>: >>> Strange... >>> Linux VM 4.0.3.2202 from squeakvm.org worked well and your prebuilt image >>> works with all this three virtual machines. Any idea why? >>> -- Pavel >>> >>> On Fri, Oct 8, 2010 at 10:49 AM, Marcus Denker <marcus.denker(a)inria.fr> >>> wrote: >>>> >>>> On Oct 8, 2010, at 10:39 AM, Pavel Krivanek wrote: >>>> >>>>> Hmm, this is the result for Linux and >>>>> cogvm 3.9-7 and pharovm 3.10-3 >>>>> >>>>> >>>> >>>> can you try: >>>> >>>> https://gforge.inria.fr/frs/download.php/27589/PharoCore-1.2-12186.zip >>>> >>>> >>>> -- >>>> Marcus Denker -- http://www.marcusdenker.de >>>> INRIA Lille -- Nord Europe. Team RMoD. >>>> >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by Mariano Martinez Peck

On Fri, Oct 8, 2010 at 3:27 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr>wrote: > The problem is that with gofer only this is tedious to maintain multiple > versions of something. > Can somebody take care of the ConfigurationOfOB? > > I do as much as my time let me. I even updated several confs. See: http://forum.world.st/Updated-Metacello-Configurations-of-OmniBrowser-Refac… So...if you load that, this should be fixed because I did that few weeks ago (fee weeks ago < 6 months). I cannot update the conf for every Lukas commit. That's not the idea of Metacello. Anyway, I explained several times (I have already put it even in Metacello FAQ) that if you want to load the latest code of every package, just load the baseline. Example: (ConfigurationOfOmnibrowser project version: '1.2-baseline') load > Stef > > > I don't know, I do not maintain them. > > > > I just realize that people often report bugs that have been fixed a > > long time ago. > > > > I suggest that you always load the latest code using the following > script: > > > > "Refactoring" > > Gofer new > > squeaksource: 'rb'; > > package: 'AST-Core'; > > package: 'AST-Semantic'; > > package: 'Refactoring-Core'; > > package: 'Refactoring-Changes'; > > package: 'Refactoring-Critics'; > > package: 'Refactoring-Environment'; > > package: 'Refactoring-Spelling'; > > load. > > ! > > "OmniBrowser" > > Gofer new > > renggli: 'omnibrowser'; > > package: 'OmniBrowser'; > > package: 'OB-Standard'; > > package: 'OB-Morphic'; > > package: 'OB-Shout'; > > package: 'OB-Refactory'; > > package: 'OB-Regex'; > > package: 'OB-SUnitIntegration'; > > load. > > ! > > "Tools" > > Gofer new > > renggli: 'unsorted'; > > package: 'Shout'; > > package: 'ShoutWorkspace'; > > package: 'RoelTyper'; > > package: 'ECompletion'; > > package: 'ECompletionOmniBrowser'; > > load. > > ! > > "Select Tools" > > SystemBrowser default: (Smalltalk at: #OBSystemBrowserAdaptor). > > > > Lukas > > > > On 8 October 2010 15:09, Alexandre Bergel <alexandre(a)bergel.eu> wrote: > >> I did a "ConfigurationOfOmnibrowser project lastVersion load" > >> Apparently ConfigurationOfOmnibrowser is not maintained... > >> > >> Cheers, > >> Alexandre > >> > >> > >> On 8 Oct 2010, at 09:03, Lukas Renggli wrote: > >> > >>> Update, this has been fixed half a year ago :-) > >>> > >>> Lukas > >>> > >>> On 8 October 2010 14:58, Alexandre Bergel <alexandre(a)bergel.eu> wrote: > >>>> hi! > >>>> > >>>> When I press cmd-t in an ob browser in the class category pane, I get > a window titled "Selected Command". I would expect executing the test of the > class category. > >>>> > >>>> I tried to find out where the "Selected Command" command is defined > with: > >>>> OBCommand allSubclasses select: [:c | c new keystroke = $t ] > >>>> => an OrderedCollection(OBCmdRunTests) > >>>> > >>>> But apparently only running the test is associated to Cmd-t. > >>>> Isn't that convenient to be able to run the test from a class > category? > >>>> > >>>> Cheers, > >>>> alexandre > >>>> -- > >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > >>>> Alexandre Bergel http://www.bergel.eu > >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> _______________________________________________ > >>>> Pharo-project mailing list > >>>> Pharo-project(a)lists.gforge.inria.fr > >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >>>> > >>> > >>> > >>> > >>> -- > >>> Lukas Renggli > >>> www.lukas-renggli.ch > >>> > >>> _______________________________________________ > >>> Pharo-project mailing list > >>> Pharo-project(a)lists.gforge.inria.fr > >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >> > >> -- > >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > >> Alexandre Bergel http://www.bergel.eu > >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > >> > >> > >> > >> > >> > >> > >> _______________________________________________ > >> Pharo-project mailing list > >> Pharo-project(a)lists.gforge.inria.fr > >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > >> > > > > > > > > -- > > Lukas Renggli > > www.lukas-renggli.ch > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by Alexandre Bergel

Ok, thanks Alexandre On 8 Oct 2010, at 09:22, Lukas Renggli wrote: > I don't know, I do not maintain them. > > I just realize that people often report bugs that have been fixed a > long time ago. > > I suggest that you always load the latest code using the following script: > > "Refactoring" > Gofer new > squeaksource: 'rb'; > package: 'AST-Core'; > package: 'AST-Semantic'; > package: 'Refactoring-Core'; > package: 'Refactoring-Changes'; > package: 'Refactoring-Critics'; > package: 'Refactoring-Environment'; > package: 'Refactoring-Spelling'; > load. > ! > "OmniBrowser" > Gofer new > renggli: 'omnibrowser'; > package: 'OmniBrowser'; > package: 'OB-Standard'; > package: 'OB-Morphic'; > package: 'OB-Shout'; > package: 'OB-Refactory'; > package: 'OB-Regex'; > package: 'OB-SUnitIntegration'; > load. > ! > "Tools" > Gofer new > renggli: 'unsorted'; > package: 'Shout'; > package: 'ShoutWorkspace'; > package: 'RoelTyper'; > package: 'ECompletion'; > package: 'ECompletionOmniBrowser'; > load. > ! > "Select Tools" > SystemBrowser default: (Smalltalk at: #OBSystemBrowserAdaptor). > > Lukas > > On 8 October 2010 15:09, Alexandre Bergel <alexandre(a)bergel.eu> wrote: >> I did a "ConfigurationOfOmnibrowser project lastVersion load" >> Apparently ConfigurationOfOmnibrowser is not maintained... >> >> Cheers, >> Alexandre >> >> >> On 8 Oct 2010, at 09:03, Lukas Renggli wrote: >> >>> Update, this has been fixed half a year ago :-) >>> >>> Lukas >>> >>> On 8 October 2010 14:58, Alexandre Bergel <alexandre(a)bergel.eu> wrote: >>>> hi! >>>> >>>> When I press cmd-t in an ob browser in the class category pane, I get a window titled "Selected Command". I would expect executing the test of the class category. >>>> >>>> I tried to find out where the "Selected Command" command is defined with: >>>> OBCommand allSubclasses select: [:c | c new keystroke = $t ] >>>> => an OrderedCollection(OBCmdRunTests) >>>> >>>> But apparently only running the test is associated to Cmd-t. >>>> Isn't that convenient to be able to run the test from a class category? >>>> >>>> Cheers, >>>> alexandre >>>> -- >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>> Alexandre Bergel http://www.bergel.eu >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> >>> -- >>> Lukas Renggli >>> www.lukas-renggli.ch >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Lukas Renggli > www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by Lukas Renggli

OB and RB evolve in tiny steps. Each commit is a stable version in itself. Each commit improves or fixes a tiny little bit of the stable core library. I consider it safe to always load the latest versions. For exactly that reason the experimental hard-core changes are in a different repository (http://source.lukas-renggli.ch/ob21) I don't know how to support such a workflow with Metacello? For me it is way faster to use the Gofer scripts below. Lukas On 8 October 2010 15:27, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > The problem is that with gofer only this is tedious to maintain multiple versions of something. > Can somebody take care of the ConfigurationOfOB? > > Stef > >> I don't know, I do not maintain them. >> >> I just realize that people often report bugs that have been fixed a >> long time ago. >> >> I suggest that you always load the latest code using the following script: >> >> "Refactoring" >> Gofer new >> Â Â Â squeaksource: 'rb'; >> Â Â Â package: 'AST-Core'; >> Â Â Â package: 'AST-Semantic'; >> Â Â Â package: 'Refactoring-Core'; >> Â Â Â package: 'Refactoring-Changes'; >> Â Â Â package: 'Refactoring-Critics'; >> Â Â Â package: 'Refactoring-Environment'; >> Â Â Â package: 'Refactoring-Spelling'; >> Â Â Â load. >> ! >> "OmniBrowser" >> Gofer new >> Â Â Â renggli: 'omnibrowser'; >> Â Â Â package: 'OmniBrowser'; >> Â Â Â package: 'OB-Standard'; >> Â Â Â package: 'OB-Morphic'; >> Â Â Â package: 'OB-Shout'; >> Â Â Â package: 'OB-Refactory'; >> Â Â Â package: 'OB-Regex'; >> Â Â Â package: 'OB-SUnitIntegration'; >> Â Â Â load. >> ! >> "Tools" >> Gofer new >> Â Â Â renggli: 'unsorted'; >> Â Â Â package: 'Shout'; >> Â Â Â package: 'ShoutWorkspace'; >> Â Â Â package: 'RoelTyper'; >> Â Â Â package: 'ECompletion'; >> Â Â Â package: 'ECompletionOmniBrowser'; >> Â Â Â load. >> ! >> "Select Tools" >> SystemBrowser default: (Smalltalk at: #OBSystemBrowserAdaptor). >> >> Lukas >> >> On 8 October 2010 15:09, Alexandre Bergel <alexandre(a)bergel.eu> wrote: >>> I did a "ConfigurationOfOmnibrowser project lastVersion load" >>> Apparently ConfigurationOfOmnibrowser is not maintained... >>> >>> Cheers, >>> Alexandre >>> >>> >>> On 8 Oct 2010, at 09:03, Lukas Renggli wrote: >>> >>>> Update, this has been fixed half a year ago :-) >>>> >>>> Lukas >>>> >>>> On 8 October 2010 14:58, Alexandre Bergel <alexandre(a)bergel.eu> wrote: >>>>> hi! >>>>> >>>>> When I press cmd-t in an ob browser in the class category pane, I get a window titled "Selected Command". I would expect executing the test of the class category. >>>>> >>>>> I tried to find out where the "Selected Command" command is defined with: >>>>> OBCommand allSubclasses select: [:c | c new keystroke = $t ] >>>>> => an OrderedCollection(OBCmdRunTests) >>>>> >>>>> But apparently only running the test is associated to Cmd-t. >>>>> Isn't that convenient to be able to run the test from a class category? >>>>> >>>>> Cheers, >>>>> alexandre >>>>> -- >>>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>>> Alexandre Bergel Â http://www.bergel.eu >>>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>> >>>> >>>> >>>> -- >>>> Lukas Renggli >>>> www.lukas-renggli.ch >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> -- >>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>> Alexandre Bergel Â http://www.bergel.eu >>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> >> -- >> Lukas Renggli >> www.lukas-renggli.ch >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Lukas Renggli www.lukas-renggli.ch

Oct. 8, 2010

Re: [Pharo-project] Cmd-t in OB?

by StÃ©phane Ducasse

The problem is that with gofer only this is tedious to maintain multiple versions of something. Can somebody take care of the ConfigurationOfOB? Stef > I don't know, I do not maintain them. > > I just realize that people often report bugs that have been fixed a > long time ago. > > I suggest that you always load the latest code using the following script: > > "Refactoring" > Gofer new > squeaksource: 'rb'; > package: 'AST-Core'; > package: 'AST-Semantic'; > package: 'Refactoring-Core'; > package: 'Refactoring-Changes'; > package: 'Refactoring-Critics'; > package: 'Refactoring-Environment'; > package: 'Refactoring-Spelling'; > load. > ! > "OmniBrowser" > Gofer new > renggli: 'omnibrowser'; > package: 'OmniBrowser'; > package: 'OB-Standard'; > package: 'OB-Morphic'; > package: 'OB-Shout'; > package: 'OB-Refactory'; > package: 'OB-Regex'; > package: 'OB-SUnitIntegration'; > load. > ! > "Tools" > Gofer new > renggli: 'unsorted'; > package: 'Shout'; > package: 'ShoutWorkspace'; > package: 'RoelTyper'; > package: 'ECompletion'; > package: 'ECompletionOmniBrowser'; > load. > ! > "Select Tools" > SystemBrowser default: (Smalltalk at: #OBSystemBrowserAdaptor). > > Lukas > > On 8 October 2010 15:09, Alexandre Bergel <alexandre(a)bergel.eu> wrote: >> I did a "ConfigurationOfOmnibrowser project lastVersion load" >> Apparently ConfigurationOfOmnibrowser is not maintained... >> >> Cheers, >> Alexandre >> >> >> On 8 Oct 2010, at 09:03, Lukas Renggli wrote: >> >>> Update, this has been fixed half a year ago :-) >>> >>> Lukas >>> >>> On 8 October 2010 14:58, Alexandre Bergel <alexandre(a)bergel.eu> wrote: >>>> hi! >>>> >>>> When I press cmd-t in an ob browser in the class category pane, I get a window titled "Selected Command". I would expect executing the test of the class category. >>>> >>>> I tried to find out where the "Selected Command" command is defined with: >>>> OBCommand allSubclasses select: [:c | c new keystroke = $t ] >>>> => an OrderedCollection(OBCmdRunTests) >>>> >>>> But apparently only running the test is associated to Cmd-t. >>>> Isn't that convenient to be able to run the test from a class category? >>>> >>>> Cheers, >>>> alexandre >>>> -- >>>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >>>> Alexandre Bergel http://www.bergel.eu >>>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> >>> -- >>> Lukas Renggli >>> www.lukas-renggli.ch >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Lukas Renggli > www.lukas-renggli.ch > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Oct. 8, 2010