April 2009 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] Sensor fixes again

by Alexandre Bergel

> did you try to modify swapControlAndAltKeys in preference broswer? I did swap mouse button. I did not try swapControlAndAltKeys, I have never used it, I do not know what the correct behavior should be. > are you sure you evaluated: InputEventSensor > installPollingEventSensorFrame > work ? Yes, it works. Alexandre > > cheers > > mariano > > > On Tue, Apr 28, 2009 at 12:37 PM, Alexandre Bergel <alexandre(a)bergel.eu > > wrote: > Hi Michael, > > Just realized, that cut & paste does not work anymore. To cut& paste, > I have to go through the menu. > Same setting that previously, I use 293 and the a VM 4.1 on OSX. > > Cheers, > Alexandre > > > On 28 Apr 2009, at 14:11, Michael Rueger wrote: > > > Alexandre Bergel wrote: > >> Michael, > >> > >> Thanks for your change. It considerably speeds up the image. > > > > Really? Oh, it's not really the image, the polling delay in the > sensor > > is shorter :-) > > > >> - text selection with shift + narrows OK > >> - swap mouse buttons OK > >> - Cmb + b OK for me > >> > >> I use OSX, 293 + the changes below > >> > >> If you want me to test something in particular, please shout. > > > > Thanks for testing and the feedback! > > Please keep reporting any shortcuts that stopped working, might be > an > > accidental omission when porting from the old Sensor. > > > > Michael > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

April 28, 2009

Re: [Pharo-project] squeakopendbx, which VM?

by Mariano Martinez Peck

2009/4/28 Hilaire Fernandes <hilaire(a)ofset.org> > On linux > > I installed OpenDBX, checked it work to connect to my remote database > > Then check for system awarness of it: > > hilaire@tice:~/Documents/Projets/BaseRessources$ ldconfig -p | grep > opendbx > libopendbxplus.so.1 (libc6) => /usr/lib/libopendbxplus.so.1 > libopendbx.so.1 (libc6) => /usr/lib/libopendbx.so.1 > > > Then installed squeakdbx in pharo from universe so ffi is installed as > well. > > I installed the latest vm (3.10-4 #2) from squeakvm.org web site as my > previous vm was apparently without ffi (or could it be the plugin compiled > in the VM?). > > > > When trying to connect, I still have 'unable to find function address'. > As you can read in the FAQ, this is because FFI doesn't find openDBX library. Read this link and tell me if it works: http://wiki.squeak.org/squeak/6129#OpenDBX%20and%20FFI Questions: - how did you install openDBX ? compile by yourself or binaries ? - do you have the mysql client library installed ? Cheers, Mariano > > FFI is pretty autist about what is going wrong. > > Any clue? > > Hilaire > > > -- > http://blog.ofset.org/hilaire > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 28, 2009

Re: [Pharo-project] Monticello/ftp stopped working for me

by Alexandre Bergel

I have a different error. Regarding updates, you can have a look at the package-cache, but printIt 'ScriptLoader new logStream' should do what you want Cheers, Alexandre On 28 Apr 2009, at 16:16, Cameron Sanders wrote: > This is the first time it has failed for me. I have been using MCs FTP > in a variety of different images & VMs over the last four months. > Suddenly... > > MessageNotUnderstood: ByteArray>>port: > > in Socket>>connectTo:port:. > > Previously, hostAddress (in the aforementioned method) had been a > SocketAddress, but now it is a ByteArray. > > See http://www.mail-archive.com/pharo-project@lists.gforge.inria.fr/msg07986.ht… > . > > How do I see which updates were installed in the last 24 hours? Oh... > looks like a lot based on the cache. (or were those just touched?) > > -Cam > > > On Apr 28, 2009, at 9:35 AM, Alexandre Bergel wrote: > >> What do yo mean stop working? >> I am in the same situation than StÃ©phane, I get a 'Socket status must >> Unconnected before opening a new connection' error when doing a >> ScriptLoader loadOBAlpha >> >> Alexandre >> >> On 28 Apr 2009, at 15:33, Cameron Sanders wrote: >> >>> So it is rather funny that after commenting on how I have been using >>> Monticello's FTP repository feature all along (since December)... it >>> stopped working on me yesterday after an update. >>> >>> My starting image was pharo0.1-10268web09.04.1 and I did an update >>> yesterday, and I saw my first failure of Monticello last night, and >>> now again this morning (and I just loaded something from the inbox). >>> >>> So a problem was fairly recently introduced, and I am in a position >>> to >>> help debug this. >>> >>> How do I find out what all updates were installed recently? >>> >>> Thanks in advance, >>> Cam >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

April 28, 2009

Re: [Pharo-project] Slow Image

by StÃ©phane Ducasse

I will give a try on mac. On Apr 28, 2009, at 2:35 PM, stephan(a)stack.nl wrote: > Astartes wrote: >> Anyone with a win32 system able to confirm that the new image slows >> heavily down as descibed in [1] using the procedure in [2]? >> >> After a first rough test I think it happens after the "Delay" fixes >> from update 10287/10288 >> >> Thx >> T. >> >> [1] >> http://lists.gforge.inria.fr/pipermail/pharo-project/2009-April/007910.html >> [2] >> http://lists.gforge.inria.fr/pipermail/pharo-project/2009-April/007934.html > > I don't know. Started at 12.48, and is still running at 14.33 :( > > Stephan > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 28, 2009

Re: [Pharo-project] Sensor fixes again

by StÃ©phane Ducasse

I was travelling and I will do a release this evening. Stef On Apr 27, 2009, at 7:45 PM, Michael Rueger wrote: > Hi all, > > next round ;-) > > > From the inbox load > > Kernel-michael_rueger.renggli.308 > > -fixed sensor install to update changeInformee > -fixed event handling, missed the button and modifier mangling "logic" > > System-Support-michael_rueger.14 > > -added changeInformee accessor methods to preference object > > After loading the packages you need to execute > > InputEventSensor installPollingEventSensorFramework > > > Michael > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 28, 2009

Re: [Pharo-project] Monticello/ftp stopped working for me

by Cameron Sanders

This is the first time it has failed for me. I have been using MCs FTP in a variety of different images & VMs over the last four months. Suddenly... MessageNotUnderstood: ByteArray>>port: in Socket>>connectTo:port:. Previously, hostAddress (in the aforementioned method) had been a SocketAddress, but now it is a ByteArray. See http://www.mail-archive.com/pharo-project@lists.gforge.inria.fr/msg07986.ht… . How do I see which updates were installed in the last 24 hours? Oh... looks like a lot based on the cache. (or were those just touched?) -Cam On Apr 28, 2009, at 9:35 AM, Alexandre Bergel wrote: > What do yo mean stop working? > I am in the same situation than StÃ©phane, I get a 'Socket status must > Unconnected before opening a new connection' error when doing a > ScriptLoader loadOBAlpha > > Alexandre > > On 28 Apr 2009, at 15:33, Cameron Sanders wrote: > >> So it is rather funny that after commenting on how I have been using >> Monticello's FTP repository feature all along (since December)... it >> stopped working on me yesterday after an update. >> >> My starting image was pharo0.1-10268web09.04.1 and I did an update >> yesterday, and I saw my first failure of Monticello last night, and >> now again this morning (and I just loaded something from the inbox). >> >> So a problem was fairly recently introduced, and I am in a position >> to >> help debug this. >> >> How do I find out what all updates were installed recently? >> >> Thanks in advance, >> Cam >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

April 28, 2009

Re: [Pharo-project] Preference initialization

by StÃ©phane Ducasse

still Don't you think that having a default can can be regenerated is not better and simple? May be I missed something.\ > > But your proposal have me a different idea how to solve the problem > for preference values: > > For references to objects or classes in the value entry it would help > to have the class reference search also go through the preference > values. That way you would get informed of references to a class from > preferences before removing the class. > There are probably other well known locations that should be checked > (e.g. Object Dependents). > > Michael > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 28, 2009

Re: [Pharo-project] Slow Image

by Damien Cassou

On Tue, Apr 28, 2009 at 3:19 PM, Torsten Bergmann <astares(a)gmx.de> wrote: > Would be interesting if we have the same problem on other platforms too. > Anyone able to try on Mac or Linux? It took approximatively 20 minutes to build on my image. -- Damien Cassou http://damiencassou.seasidehosting.st

April 28, 2009

[Pharo-project] squeakopendbx, which VM?

by Hilaire Fernandes

On linux I installed OpenDBX, checked it work to connect to my remote database Then check for system awarness of it: hilaire@tice:~/Documents/Projets/BaseRessources$ ldconfig -p | grep opendbx libopendbxplus.so.1 (libc6) => /usr/lib/libopendbxplus.so.1 libopendbx.so.1 (libc6) => /usr/lib/libopendbx.so.1 Then installed squeakdbx in pharo from universe so ffi is installed as well. I installed the latest vm (3.10-4 #2) from squeakvm.org web site as my previous vm was apparently without ffi (or could it be the plugin compiled in the VM?). When trying to connect, I still have 'unable to find function address'. FFI is pretty autist about what is going wrong. Any clue? Hilaire -- http://blog.ofset.org/hilaire

April 28, 2009

Re: [Pharo-project] Sensor fixes again

by Mariano Martinez Peck

did you try to modify swapControlAndAltKeys in preference broswer? are you sure you evaluated: InputEventSensor installPollingEventSensorFramework ? cheers mariano On Tue, Apr 28, 2009 at 12:37 PM, Alexandre Bergel <alexandre(a)bergel.eu>wrote: > Hi Michael, > > Just realized, that cut & paste does not work anymore. To cut& paste, > I have to go through the menu. > Same setting that previously, I use 293 and the a VM 4.1 on OSX. > > Cheers, > Alexandre > > > On 28 Apr 2009, at 14:11, Michael Rueger wrote: > > > Alexandre Bergel wrote: > >> Michael, > >> > >> Thanks for your change. It considerably speeds up the image. > > > > Really? Oh, it's not really the image, the polling delay in the sensor > > is shorter :-) > > > >> - text selection with shift + narrows OK > >> - swap mouse buttons OK > >> - Cmb + b OK for me > >> > >> I use OSX, 293 + the changes below > >> > >> If you want me to test something in particular, please shout. > > > > Thanks for testing and the feedback! > > Please keep reporting any shortcuts that stopped working, might be an > > accidental omission when porting from the old Sensor. > > > > Michael > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

April 28, 2009