February 2009 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] [Vm-dev] newDelta >0 failed in sqUnixMemory -- Was Re: Incompatibility between Pharo and Seasidehosting

by Bruce O'Neel

Hi, Yes, thanks. The problem is that the most recent unix vm has exactly this problem. cheers bruce On Sun, Feb 22, 2009 at 04:33:20PM -0800, John M McIntosh wrote: > Old news. > > http://www.nabble.com/An-issue-with-Slang,-the-interpreter---the-VM,-and-a-… > > Could be other important VMMaker changes between 2007 and today... > > > On 22-Feb-09, at 4:47 AM, Bruce O'Neel wrote: > >> Hi, >> >> I downloaded Ian's image/changes bundle named unix-3.10-4.vmm.tar.gz >> from http://www.squeakvm.org/unix/ >> and looked into it a bit. >> >> In ObjectMemory biasToGrow it looks like the problem is >> >> biasToGrow >> | growSize | >> growSize := growHeadroom*3/2 - (self sizeOfFree: freeBlock) >> self growObjectMemory: growSize >> >> there are no '.'s after the lines. Shouldn't it look like: >> >> biasToGrow >> | growSize | >> growSize := growHeadroom*3/2 - (self sizeOfFree: freeBlock). >> self growObjectMemory: growSize. >> >> that? >> >> It looks like the slang interpreter/translater must be coughing a bit >> on what is basically >> slight invalid syntax, right? >> >> I guess that next up I have to figure out how to actually run vm maker >> :-) >> >> cheers >> >> bruce > > -- > === > ======================================================================== > John M. McIntosh <johnmci(a)smalltalkconsulting.com> > Corporate Smalltalk Consulting Ltd. http://www.smalltalkconsulting.com > === > ======================================================================== > > >

Feb. 24, 2009

Re: [Pharo-project] Towards Pharo 1.0

by Damien Cassou

On Tue, Feb 24, 2009 at 11:25 AM, Alexandre Bergel <alexandre(a)bergel.eu> wrote: > How can I close an issue? ( i want to close Issue 472, it has been > fixed) > I do not see an option for this. You need to have administrative rights (which you have now). You have to go to Status field and choose a closed status -- Damien Cassou http://damiencassou.seasidehosting.st

Feb. 24, 2009

Re: [Pharo-project] looking for Unicode testers

by Adrian Lienhard

I'm looking at a Pharo core #10241 image. Adrian On Feb 24, 2009, at 10:48 , Igor Stasenko wrote: > 2009/2/24 Adrian Lienhard <adi(a)netstyle.ch>: >> Sensor kbdTest >> > "There is no implementors of kbdTest" > > :( > > What image might contain this method? > >> HTH, >> Adrian >> >> On Feb 24, 2009, at 09:48 , Igor Stasenko wrote: >> >>> 2009/2/24 Michael Rueger <m.rueger(a)acm.org>: >>>> Igor Stasenko wrote: >>>> >>>>> what is not very convenient is that copy/paste (as well as the >>>>> rest of >>>>> keyboard shortcuts ) is not working when keyboard layout not >>>>> english. >>>> >>>> If you could be so kind to tell me what comes back in slot 3 of the >>>> input event on your Russian keyboard if you simply type the >>>> equivalent >>>> of 'xcv' (without alt or ctrl)? >>>> >>>> I'm interested in what comes back on the keyDown and the keystroke >>>> event. >>>> >>> >>> I tried something like this >>> >>> [ | event | >>> event := Sensor peekEvent. >>> event ifNotNil: [ >>> ((event first = 2) and: [event fourth = 1] ) ifTrue: [ >>> Transcript show: (event third printStringRadix: 16); cr. >>> ] ] ] repeat >>> >>> but it not shows anything :( >>> Have a snippet which i can run to show key codes? >>> >>> >>> >>>> Thanks >>>> >>>> Michael >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> >>> -- >>> Best regards, >>> Igor Stasenko AKA sig. >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Feb. 24, 2009

[Pharo-project] MIMEdatabase fix?

by StÃ©phane Ducasse

Hi can someone check http://code.google.com/p/pharo/issues/detail?id=520 Thanks

Feb. 24, 2009

Re: [Pharo-project] SmaCC can't find silence in Sound Library ?!

by Oscar Nierstrasz

Excellent! - on On Feb 23, 2009, at 17:04, Adrian Lienhard wrote: > I attached to the report a changeset that should fix the problem > > http://code.google.com/p/pharo/issues/list?updated=599 > > It makes the Beep sound, which is still in the image, being played if > the requested sound name does not exist. > > Adrian > > On Feb 23, 2009, at 16:33 , Adrian Lienhard wrote: > >> I would just remove the inform: to ignore playing a sound that does >> not exist. >> I don't think one really needs sound to work with SmaCC ;) >> >>> Shouldn't all the sounds listed in SampledSound >>> class>>universalSoundKeys be permanently in the image? >>> >>> Where are they all? >> >> >> We removed the sound samples from the image to spare memory. Hence, >> #universalSoundKeys should be updated. >> >> I created http://code.google.com/p/pharo/issues/detail?id=599 >> >> Adrian >> >> >> On Feb 23, 2009, at 16:21 , StÃ©phane Ducasse wrote: >> >>> one idea would be save a sound in 3.9 and reload it in this version. >>> >>> stef >>> >>> On Feb 23, 2009, at 2:00 PM, Oscar Nierstrasz wrote: >>> >>>> >>>> Hi, >>>> >>>> I just loaded SmaCC and SmaCCDev into a Pharo image >>>> (pharo0.1-10231dev09.02.1) and tried to start it up. >>>> >>>> When I click on the tabs I get the annoying pop-up message: >>>> "silence >>>> not found in the Sound library". >>>> >>>> Has anyone else experienced this? I did not find anything in the >>>> list >>>> of issues. >>>> >>>> Shall I add it? Anyone know how to fix it? >>>> >>>> - on >>>> >>>> --- >>>> Prof. Dr. O. Nierstrasz -- Oscar.Nierstrasz(a)iam.unibe.ch >>>> Software Composition Group -- http://www.iam.unibe.ch/~scg >>>> University of Bern -- Tel/Fax +41 31 631.4618/3355 >>>> vcard: http://www.iam.unibe.ch/~oscar/oscarNierstrasz.vcf >>>> >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

Feb. 24, 2009

Re: [Pharo-project] Towards Pharo 1.0

by Marcus Denker

On 24.02.2009, at 11:25, Alexandre Bergel wrote: >> You reported a bug half a year ago? Try to recreate it and add a >> comment: This is still a problem >> in #10243 and the way I re-created the problem is this. > > > How can I close an issue? ( i want to close Issue 472, it has been > fixed) > I do not see an option for this. Maybe one needs some special status to close bugs on the tracker? No idea... Marcus -- Marcus Denker -- denker(a)acm.org http://www.marcusdenker.de

Feb. 24, 2009

Re: [Pharo-project] Towards Pharo 1.0

by Alexandre Bergel

> You reported a bug half a year ago? Try to recreate it and add a > comment: This is still a problem > in #10243 and the way I re-created the problem is this. How can I close an issue? ( i want to close Issue 472, it has been fixed) I do not see an option for this. Thanks for reminding us to go over previous issues. Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

Feb. 24, 2009

Re: [Pharo-project] looking for Unicode testers

by Igor Stasenko

2009/2/24 Adrian Lienhard <adi(a)netstyle.ch>: > Sensor kbdTest > "There is no implementors of kbdTest" :( What image might contain this method? > HTH, > Adrian > > On Feb 24, 2009, at 09:48 , Igor Stasenko wrote: > >> 2009/2/24 Michael Rueger <m.rueger(a)acm.org>: >>> Igor Stasenko wrote: >>> >>>> what is not very convenient is that copy/paste (as well as the >>>> rest of >>>> keyboard shortcuts ) is not working when keyboard layout not >>>> english. >>> >>> If you could be so kind to tell me what comes back in slot 3 of the >>> input event on your Russian keyboard if you simply type the >>> equivalent >>> of 'xcv' (without alt or ctrl)? >>> >>> I'm interested in what comes back on the keyDown and the keystroke >>> event. >>> >> >> I tried something like this >> >> [ | event | >> Â event := Sensor peekEvent. >> Â event ifNotNil: [ >> Â Â Â ((event first = 2) and: [event fourth = 1] ) ifTrue: [ >> Â Â Â Transcript show: (event third printStringRadix: 16); cr. >> Â Â Â ] ] ] repeat >> >> but it not shows anything :( >> Have a snippet which i can run to show key codes? >> >> >> >>> Thanks >>> >>> Michael >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> >> -- >> Best regards, >> Igor Stasenko AKA sig. >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > -- Best regards, Igor Stasenko AKA sig.

Feb. 24, 2009

[Pharo-project] New Pharo-dev based on 10243

by Damien Cassou

http://code.google.com/p/pharo/wiki/Downloads?tm=2 -- Damien Cassou http://damiencassou.seasidehosting.st

Feb. 24, 2009

Re: [Pharo-project] looking for Unicode testers

by Adrian Lienhard

Sensor kbdTest HTH, Adrian On Feb 24, 2009, at 09:48 , Igor Stasenko wrote: > 2009/2/24 Michael Rueger <m.rueger(a)acm.org>: >> Igor Stasenko wrote: >> >>> what is not very convenient is that copy/paste (as well as the >>> rest of >>> keyboard shortcuts ) is not working when keyboard layout not >>> english. >> >> If you could be so kind to tell me what comes back in slot 3 of the >> input event on your Russian keyboard if you simply type the >> equivalent >> of 'xcv' (without alt or ctrl)? >> >> I'm interested in what comes back on the keyDown and the keystroke >> event. >> > > I tried something like this > > [ | event | > event := Sensor peekEvent. > event ifNotNil: [ > ((event first = 2) and: [event fourth = 1] ) ifTrue: [ > Transcript show: (event third printStringRadix: 16); cr. > ] ] ] repeat > > but it not shows anything :( > Have a snippet which i can run to show key codes? > > > >> Thanks >> >> Michael >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > > -- > Best regards, > Igor Stasenko AKA sig. > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

Feb. 24, 2009