Hi all, Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart. Thanks, Juan
Hi Juan, You can have a look to eyeSee: Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
Thanks for your answer Camille! I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class. Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples. Is someone maintaining this? Thanks again, Juan On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com>wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0. Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
Hi, I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0) Alain On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com>wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com
wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from? The official repositories are on SmalltalkHub/Moose Stef On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
and not just the moose people :) take into account that all those project has been migrated to smalltalkhub, under the moose team: http://smalltalkhub.com/#!/~Moose for the moose guys: what about promote the right configurations to MetaRepoForPharo20? (I know there are a lot of cool stuff in that team that can be shared :P) (yeah, I know... I'm annoying with this "configurations" stuff, but someone has to remember it, otherwise it will be wrongly empty :) Esteban On May 17, 2013, at 8:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote:
****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
Hi all, thanks for the answers, I also notice the problem with petit parser (the parsing stuff is working but not the editor throws a MNU), I loaded it using the configuration browser I'll try loading from SH later, right now Im stuck with something else. Thanks again, Juan. On Fri, May 17, 2013 at 4:20 AM, Esteban Lorenzano <estebanlm@gmail.com>wrote:
and not just the moose people :)
take into account that all those project has been migrated to smalltalkhub, under the moose team:
http://smalltalkhub.com/#!/~Moose
for the moose guys:
what about promote the right configurations to MetaRepoForPharo20? (I know there are a lot of cool stuff in that team that can be shared :P)
(yeah, I know... I'm annoying with this "configurations" stuff, but someone has to remember it, otherwise it will be wrongly empty :)
Esteban
On May 17, 2013, at 8:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote:
****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com>wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel < camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
I made Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault. The tool is actually loaded but when I try to launch it from the system menu I get a receiver of "-" is nil Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser) I'll switch to smalltalkhub now Alain On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr
wrote:
****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com>wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel < camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault. once again, and clicked on the petit entry in the tools menu ... and Pharo crashed! On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com>wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote:
****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com
wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel < camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
Hi, Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub: Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment Cheers, Doru On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com> wrote: I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com "Innovation comes in the least expected form. That is, if it is expected, it already happened."
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ... The last error message was about a labelGraphic ( aMultistateButton); in case it helps... On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote:
Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and
Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com>
wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied
blockclosure class.
Then when I run the test there is a faliure with the anouncements,
which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
Hi, Something does not add up :). What menu are you talking about? Here is an image based on Pharo 2.0 that only contains PetitParser: https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit... If I run "PPBrowser open", it seems to work just fine. Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser --install=development ./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources Cheers, Doru On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com> wrote: I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com "To lead is not to demand things, it is to make them happen."
in the "world" menu, "tools" then "petitparser"; the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer... On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote:
Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser:
https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser --install=development ./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and
Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com>
wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non
satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements,
which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
Hi Alain, As I said, something does not add up. What do you do exactly when you are building your image? Also, could you try following the instructions from the previous mail and let me know if it still fails? Cheers, Doru On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser: https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser --install=development ./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com> wrote: I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com "If you can't say why something is relevant, it probably isn't."
Doru, I loaded the moose stuf from smalltalk hub (following your instructions) and worked perferct thanks Regars, Juan On Sun, May 19, 2013 at 9:01 AM, Tudor Girba <tudor@tudorgirba.com> wrote:
Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser:
https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser
--install=development
./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and
Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <
alain.busser@gmail.com> wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non
satisfied blockclosure class.
Then when I run the test there is a faliure with the
anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
I dropped the image on Pharo and I still have this illegal subtraction message. I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates. The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything). So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no? On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote:
Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser:
https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser
--install=development
./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and
Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <
alain.busser@gmail.com> wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non
satisfied blockclosure class.
Then when I run the test there is a faliure with the
anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
On May 20, 2013, at 6:09 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates. There are no daily updates in 2.0.
Marcus
Hi, On May 20, 2013, at 6:05 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates.
How are you downloading PetitParser? If you do not explicitly say what you do, it is hard to say what is wrong :) I gave you detailed instructions for how to load PetitParser. Please follow them and let me know if you still have the problem: - open a workspace in a Pharo 2.0 image - execute (select and invoke do it): Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment Cheers, Doru
The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything).
So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no?
On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser: https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser --install=development ./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com> wrote: I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
-- www.tudorgirba.com "Problem solving efficiency grows with the abstractness level of problem understanding."
Yes, I done it as you wrote with Gofer, then I used Monticello to download petit (file by file), then I done the Gofer trick again, and I still have the same problem: A nil as "bottom" which blocks a subtraction... If I am the only one to encounter the problem, it probably comes from somewhere else but where? On Mon, May 20, 2013 at 10:37 PM, Tudor Girba <tudor@tudorgirba.com> wrote:
Hi,
On May 20, 2013, at 6:05 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates.
How are you downloading PetitParser? If you do not explicitly say what you do, it is hard to say what is wrong :)
I gave you detailed instructions for how to load PetitParser. Please follow them and let me know if you still have the problem:
- open a workspace in a Pharo 2.0 image - execute (select and invoke do it): Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything).
So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no?
On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser:
https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser
--install=development
./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ...
and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <
alain.busser@gmail.com> wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in
so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non
satisfied blockclosure class.
Then when I run the test there is a faliure with the
anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
-- www.tudorgirba.com
"Problem solving efficiency grows with the abstractness level of problem understanding."
On May 21, 2013, at 9:45 AM, Alain Busser <alain.busser@gmail.com> wrote:
Yes, I done it as you wrote with Gofer, then I used Monticello to download petit (file by file)
why do you have to donwload file by file? Gofer does it for you. execute only these two expressions:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Stef
, then I done the Gofer trick again, and I still have the same problem: A nil as "bottom" which blocks a subtraction...
If I am the only one to encounter the problem, it probably comes from somewhere else but where?
On Mon, May 20, 2013 at 10:37 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
On May 20, 2013, at 6:05 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates.
How are you downloading PetitParser? If you do not explicitly say what you do, it is hard to say what is wrong :)
I gave you detailed instructions for how to load PetitParser. Please follow them and let me know if you still have the problem:
- open a workspace in a Pharo 2.0 image - execute (select and invoke do it): Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything).
So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no?
On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser: https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser --install=development ./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com> wrote: I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
-- www.tudorgirba.com
"Problem solving efficiency grows with the abstractness level of problem understanding."
Exactly. Take a fresh image. Do not download anything manually. Only execute the script and it should work. Doru On Tue, May 21, 2013 at 2:56 PM, stephane ducasse <stephane.ducasse@free.fr>wrote:
On May 21, 2013, at 9:45 AM, Alain Busser <alain.busser@gmail.com> wrote:
Yes, I done it as you wrote with Gofer, then I used Monticello to download petit (file by file)
why do you have to donwload file by file?
Gofer does it for you.
execute only these two expressions:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Stef
, then I done the Gofer trick again, and I still have the same problem: A nil as "bottom" which blocks a subtraction...
If I am the only one to encounter the problem, it probably comes from somewhere else but where?
On Mon, May 20, 2013 at 10:37 PM, Tudor Girba <tudor@tudorgirba.com>wrote:
Hi,
On May 20, 2013, at 6:05 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates.
How are you downloading PetitParser? If you do not explicitly say what you do, it is hard to say what is wrong :)
I gave you detailed instructions for how to load PetitParser. Please follow them and let me know if you still have the problem:
- open a workspace in a Pharo 2.0 image - execute (select and invoke do it): Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything).
So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no?
On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser:
https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser
--install=development
./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ...
and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <
alain.busser@gmail.com> wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in
so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non
satisfied blockclosure class.
Then when I run the test there is a faliure with the
anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
-- www.tudorgirba.com
"Problem solving efficiency grows with the abstractness level of problem understanding."
-- www.tudorgirba.com "Every thing has its own flow"
I didn't *have to* download file by file, I just wanted to try everything that I could. Doing the Gofer trick still does not allow me to launch a PPBrowser. If I try with a fresh image, it works OK, that may prove that Petit works well on Pharo 2.0, but on my own image it don't work, so there may well be some competition between Athens and Petit (or MathsOntologie and Petit?) Next step: I removed, by hand, any package which name begins with "petit", then to crash Pharo I just have to do Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. and that's all! With a fresh image, I will have to load Athens and MathsOntologie again, won't I? Plus the changes that I already made to MathsOntologie... On Tue, May 21, 2013 at 4:56 PM, stephane ducasse <stephane.ducasse@free.fr>wrote:
On May 21, 2013, at 9:45 AM, Alain Busser <alain.busser@gmail.com> wrote:
Yes, I done it as you wrote with Gofer, then I used Monticello to download petit (file by file)
why do you have to donwload file by file?
Gofer does it for you.
execute only these two expressions:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Stef
, then I done the Gofer trick again, and I still have the same problem: A nil as "bottom" which blocks a subtraction...
If I am the only one to encounter the problem, it probably comes from somewhere else but where?
On Mon, May 20, 2013 at 10:37 PM, Tudor Girba <tudor@tudorgirba.com>wrote:
Hi,
On May 20, 2013, at 6:05 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates.
How are you downloading PetitParser? If you do not explicitly say what you do, it is hard to say what is wrong :)
I gave you detailed instructions for how to load PetitParser. Please follow them and let me know if you still have the problem:
- open a workspace in a Pharo 2.0 image - execute (select and invoke do it): Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything).
So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no?
On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser:
https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser
--install=development
./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded
petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ...
and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <
alain.busser@gmail.com> wrote:
I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse < stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in
so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel < camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non
satisfied blockclosure class.
Then when I run the test there is a faliure with the
anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <
camille.teruel@gmail.com> wrote:
Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
-- www.tudorgirba.com
"Problem solving efficiency grows with the abstractness level of problem understanding."
Hi, My guess is that the problem with your old image is that you already loaded an old version of PetitParser in there and this loaded an old version of Glamour. When you loaded PetitParser with the script I gave you, it probably did not update the Glamour code. In any case, I would suggest to never rely on an image more than one day. Images are for work, not for storage. This is why, Gofer and Metacello are great tools that liberate you from the pain of reconstructing an image. Please look into creating a script that loads everything you want in a new image. Cheers, Doru On May 21, 2013, at 7:00 PM, Alain Busser <alain.busser@gmail.com> wrote:
I didn't *have to* download file by file, I just wanted to try everything that I could. Doing the Gofer trick still does not allow me to launch a PPBrowser.
If I try with a fresh image, it works OK, that may prove that Petit works well on Pharo 2.0, but on my own image it don't work, so there may well be some competition between Athens and Petit (or MathsOntologie and Petit?)
Next step: I removed, by hand, any package which name begins with "petit", then to crash Pharo I just have to do
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load.
and that's all!
With a fresh image, I will have to load Athens and MathsOntologie again, won't I? Plus the changes that I already made to MathsOntologie...
On Tue, May 21, 2013 at 4:56 PM, stephane ducasse <stephane.ducasse@free.fr> wrote:
On May 21, 2013, at 9:45 AM, Alain Busser <alain.busser@gmail.com> wrote:
Yes, I done it as you wrote with Gofer, then I used Monticello to download petit (file by file)
why do you have to donwload file by file?
Gofer does it for you.
execute only these two expressions:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Stef
, then I done the Gofer trick again, and I still have the same problem: A nil as "bottom" which blocks a subtraction...
If I am the only one to encounter the problem, it probably comes from somewhere else but where?
On Mon, May 20, 2013 at 10:37 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
On May 20, 2013, at 6:05 PM, Alain Busser <alain.busser@gmail.com> wrote:
I dropped the image on Pharo and I still have this illegal subtraction message.
I don't build anything, I just downloaded Pharo 2.0 "one click" and added MathsOntologie, DrGeo and PetitParser. Plus the (almost) daily updates.
How are you downloading PetitParser? If you do not explicitly say what you do, it is hard to say what is wrong :)
I gave you detailed instructions for how to load PetitParser. Please follow them and let me know if you still have the problem:
- open a workspace in a Pharo 2.0 image - execute (select and invoke do it): Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
The debugger says that GLMSystemWindow's "addMorph: fullFrame" method has a subtraction where WindowBorderWidth (which equals 4) is subtracted to bottom; and bottom is nil, so it don't understand the "-" message (I doubt a nil object understands anything).
So I guess the question is "why is bottom nil?" I see that at the beginning there is bottom := frame bottomOffset. Whereas frame is a LayoutFrame ( (0@0) + (4@4)px corner: (1@1) + (-4@nil)px ) so I imagine the nil comes from this point, no?
On Sun, May 19, 2013 at 4:01 PM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi Alain,
As I said, something does not add up.
What do you do exactly when you are building your image?
Also, could you try following the instructions from the previous mail and let me know if it still fails?
Cheers, Doru
On May 19, 2013, at 1:24 PM, Alain Busser <alain.busser@gmail.com> wrote:
in the "world" menu, "tools" then "petitparser";
the browser method is "openWith: aRender" which fails to render anything in GLMMorphicRenderer...
On Sun, May 19, 2013 at 12:02 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Something does not add up :). What menu are you talking about?
Here is an image based on Pharo 2.0 that only contains PetitParser: https://ci.inria.fr/moose/job/petitparser/lastSuccessfulBuild/artifact/petit...
If I run "PPBrowser open", it seems to work just fine.
Here is how the image was created: wget --quiet -O - http://get.pharo.org/20+vmLatest | bash ./pharo Pharo.image save $JOB_NAME REPO=http://www.smalltalkhub.com/mc/Moose/PetitParser/main ./pharo $JOB_NAME.image config $REPO ConfigurationOfPetitParser --install=development ./pharo $JOB_NAME.image test --junit-xml-output "Petit.*" mv ./pharo-vm/PharoV20.sources ./ zip -r $JOB_NAME.zip $JOB_NAME.image $JOB_NAME.changes PharoV20.sources
Cheers, Doru
On May 18, 2013, at 7:56 PM, Alain Busser <alain.busser@gmail.com> wrote:
Done, and when I clicked on the menu entry ... and ... guess what ... Pharo crashed again ...
The last error message was about a labelGraphic ( aMultistateButton); in case it helps...
On Sat, May 18, 2013 at 9:43 AM, Tudor Girba <tudor@tudorgirba.com> wrote: Hi,
Please load the latest version of PetitParser in Pharo 2.0 from SmalltalkHub:
Gofer new smalltalkhubUser: 'Moose' project: 'PetitParser'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) loadDevelopment
Cheers, Doru
On May 17, 2013, at 7:23 PM, Alain Busser <alain.busser@gmail.com> wrote:
OK, I used Monticello with the Moose address, and downloaded petitsmalltalk and PetitParser, as well as configuration files. I made
(Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
once again, and clicked on the petit entry in the tools menu ... and Pharo crashed!
On Fri, May 17, 2013 at 9:11 PM, Alain Busser <alain.busser@gmail.com> wrote: I made
Gofer new renggli: 'petit'; package: 'ConfigurationOfPetitParser'; load. (Smalltalk at: #ConfigurationOfPetitParser) perform: #loadDefault.
The tool is actually loaded but when I try to launch it from the system menu I get a
receiver of "-" is nil
Same message if in the workspace I type PPBrowser new open, but not if I try PPBrowser new inspect (there, I have an inspector open on the PPBrowser)
I'll switch to smalltalkhub now
Alain
On Fri, May 17, 2013 at 10:44 AM, stephane ducasse <stephane.ducasse@free.fr> wrote: ****ALL*** the moose people are using PetitParser and it loads in 20. so where you took the code from?
The official repositories are on SmalltalkHub/Moose
Stef
On May 16, 2013, at 8:27 PM, Alain Busser <alain.busser@gmail.com> wrote:
Hi,
I have a similar problem with PetitParser (loads well under Pharo 1.4, not as well under Pharo 2.0)
Alain
On Thu, May 16, 2013 at 8:56 PM, Camille Teruel <camille.teruel@gmail.com> wrote:
On 16 mai 2013, at 17:59, stephane ducasse wrote:
yes normally the moose people. This is strange because eyesee is in Moose and we load it daily in 2.0.
Maybe the smalltalk hub repo is more up to date?
Stef
Thanks for your answer Camille!
I tried it. It loads well on 1.4 but in 2.0 shows warining about a non satisfied blockclosure class.
Then when I run the test there is a faliure with the anouncements, which also accured when I tried the examples.
Is someone maintaining this?
Thanks again, Juan
On Thu, May 16, 2013 at 11:27 AM, Camille Teruel <camille.teruel@gmail.com> wrote: Hi Juan,
You can have a look to eyeSee:
Gofer it squeaksource: 'EyeSee'; package: 'ConfigurationOfEyeSee'; load. (Smalltalk at: #ConfigurationOfEyeSee) loadDefault
On 16 mai 2013, at 16:03, Juan Ignacio Vaccarezza wrote:
Hi all,
Does anybody know a chart framework? Im looking fo something like jfreechart (java chart framework). I need bar graph, pie chart, and line chart.
Thanks, Juan
-- www.tudorgirba.com
"Innovation comes in the least expected form. That is, if it is expected, it already happened."
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"If you can't say why something is relevant, it probably isn't."
-- www.tudorgirba.com
"Problem solving efficiency grows with the abstractness level of problem understanding."
-- www.tudorgirba.com "Beauty is where we see it."
participants (8)
-
Alain Busser -
btc＠openinworld.com -
Camille Teruel -
Esteban Lorenzano -
Juan Ignacio Vaccarezza -
Marcus Denker -
stephane ducasse -
Tudor Girba