2 questions around gitlab, gitfiletree, BaselineOf
Hi, we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine. There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this: | gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ]. I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method... baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ] 2) Also, when I take a new Image, I have to do several steps load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load I think this is not the best way, I would like to make it right. Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows. Regards Sabine -- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
Hi Sabine, I have makefiles to do the sort of thing you describe automatically (build an image from local, git managed repositories) and a baseline: I write stuff like ./pharo-cli pharo/Pharo.image --no-default-preferences eval --save Metacello new baseline: \'MyProject\'\; repository:\'gitfiletree://`pwd`/../src/\'\; load (works once gitfiletree has been loaded) notice the `pwd` embedded in there which allows you to put your local git clone anywhere you like. One thing I can't do, however, is having a dependency in BaselineOfMyProject to a locally hosted project (say BaselineOfANiceLib stored in ~/Project2017/ClientX/) because when I write the baseline, I can't be sure where it will be on-disk. If you're ok with gitfiletree doing the clone from gitlab on its own, one could still write a direct access to your internal gitlab server, in the baseline of MyProject, like that: spec repository: 'gitfiletree:// gitlab.intra.example.com/ANiceLib:master/placeWhereAreThePackages'; The oldest such scripts I have are for Pharo3. Does that answer your questions ? Thierry 2017-07-07 15:48 GMT+02:00 Sabine Manaa <manaa.sabine@gmail.com>:
Hi,
we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine.
There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this:
| gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ].
I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ]
2) Also, when I take a new Image, I have to do several steps
load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load
I think this is not the best way, I would like to make it right.
Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows.
Regards Sabine
-- View this message in context: http://forum.world.st/2- questions-around-gitlab-gitfiletree-BaselineOf-tp4953877.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
Hi Sabine, for your own baseline you don't need to specify a repository. Just load it with something like: Metacello new baseline: 'RLA24'; repository: 'filetree://disklocation/repository'; load: 'Group To Load' Also you can have local copies of your dependencies in case you don't want to use an internet connection for dowloading, just use the lock command of Metacello to "overwrite" the repository definitions. For example take a look at: https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f Regards, Gabriel On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <manaa.sabine@gmail.com> wrote:
Hi,
we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine.
There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this:
| gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ].
I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ]
2) Also, when I take a new Image, I have to do several steps
load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load
I think this is not the best way, I would like to make it right.
Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows.
Regards Sabine
-- View this message in context: http://forum.world.st/2- questions-around-gitlab-gitfiletree-BaselineOf-tp4953877.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
Hi Thierry, Gabriel and Peter, thank you very much. First I had a look at this because it would be nice to load directly from Gitlab (with then generating a local repository automatically): spec repository: 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ placeWhereAreThePackages'; I did not manage to use it because I would need to give a port as parameter (we do not use port 22). I chatted in discord with Peter Uhnak. It seemed that this is not yet possible because of my case that i do not use port 22 and I use a config file. On the command line, this command succeeds with cloning my repository from gitlab: git clone git@SPF_GITLAB:SPF/Spesenfuchs.git There is a config file which defines my host: host SPF_GITLAB HostName 192.168.1.61 Port 30001 I try to write my baseline with this spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'. This did not work in the beginning. I played around and found out that there are 2 points where I had to change the system to make this work: 1) ZnUrl>>parseHostPort: stream atEnd ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ ZnPortNotANumber signal ]. (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 to: 65535 ]." self port: 30001 "portNumber" ] ] ->> here, it is assumed that there is always a port integer after the : If i set it hard to my port I skip this problem 2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl here I changed the code also hard from repo remoteUrl: 'git@' , aZnUrl host , ':' , path to repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git' ->> here, aUZnUrl host is in lowercase but my name is in uppercase :SPF is missing the existing code would make this: git@spf_gitlab:Spesenfuchs.git instead of git@SPF_GITLAB:SPF/Spesenfuchs.git With this 2 changes, my code could load. So my question: Are this 2 points issues to fix or should I create my own workaround (create my own loader, not making THIS changes )? Regards Sabine 2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] < ml+s1294792n4953880h75@n4.nabble.com>:
Hi Sabine, for your own baseline you don't need to specify a repository. Just load it with something like:
Metacello new baseline: 'RLA24'; repository: 'filetree://disklocation/repository'; load: 'Group To Load'
Also you can have local copies of your dependencies in case you don't want to use an internet connection for dowloading, just use the lock command of Metacello to "overwrite" the repository definitions. For example take a look at:
https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f
Regards, Gabriel
On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote:
Hi,
we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine.
There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this:
| gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ].
I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ]
2) Also, when I take a new Image, I have to do several steps
load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load
I think this is not the best way, I would like to make it right.
Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows.
Regards Sabine
-- View this message in context: http://forum.world.st/2-questi ons-around-gitlab-gitfiletree-BaselineOf-tp4953877.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4953880.html To start a new topic under Pharo Smalltalk Users, email ml+s1294792n1310670h65@n4.nabble.com To unsubscribe from Pharo Smalltalk Users, click here <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&nod...> . NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
Hi Sabine, as far as I remember when I implemented it, the use of a config file shouldn't be an issue, because GitFileTree rewrites exactly the git@SPF_GITLAB the way you would expect, as long as it manages to identify correctly the parts in the URL (and to identify those parts, it relies on Zinc). Now, have you tried with: gitfiletree://SPF_GITLAB/SPF/Spesenfuchs ? Zinc correctly identifies SPF_GITLAB as the host, but it writes it non-capitalized (spf_gitlab), which may makes it miss your .ssh/config entry. In that case, could you add the spf_gitlab entry as well in your config file ? Thierry Le 07/07/2017 à 21:32, Sabine Manaa a écrit :
Hi Thierry, Gabriel and Peter,
thank you very much. First I had a look at this because it would be nice to load directly from Gitlab (with then generating a local repository automatically):
spec repository: 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ <http://example.com/ANiceLib:master/>placeWhereAreThePackages';
I did not manage to use it because I would need to give a port as parameter (we do not use port 22). I chatted in discord with Peter Uhnak.
It seemed that this is not yet possible because of my case that i do not use port 22 and I use a config file.
On the command line, this command succeeds with cloning my repository from gitlab:
git clone git@SPF_GITLAB:SPF/Spesenfuchs.git
There is a config file which defines my host:
host SPF_GITLAB HostName 192.168.1.61 Port 30001
I try to write my baseline with this
spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'.
This did not work in the beginning.
I played around and found out that there are 2 points where I had to change the system to make this work:
1) ZnUrl>>parseHostPort: stream atEnd ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ ZnPortNotANumber signal ]. (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 to: 65535 ]." self port: 30001 "portNumber" ] ] ->> here, it is assumed that there is always a port integer after the : If i set it hard to my port I skip this problem
2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl here I changed the code also hard from
repo remoteUrl: 'git@' , aZnUrl host , ':' , path to repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git'
->> here, aUZnUrl host is in lowercase but my name is in uppercase :SPF is missing
the existing code would make this: git@spf_gitlab:Spesenfuchs.git instead of git@SPF_GITLAB:SPF/Spesenfuchs.git
With this 2 changes, my code could load.
So my question: Are this 2 points issues to fix or should I create my own workaround (create my own loader, not making THIS changes )?
Regards Sabine
2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] <[hidden email] </user/SendEmail.jtp?type=node&node=4953938&i=0>>:
Hi Sabine, for your own baseline you don't need to specify a repository. Just load it with something like:
Metacello new baseline: 'RLA24'; repository: 'filetree://disklocation/repository'; load: 'Group To Load'
Also you can have local copies of your dependencies in case you don't want to use an internet connection for dowloading, just use the lock command of Metacello to "overwrite" the repository definitions. For example take a look at:
https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f <https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f>
Regards, Gabriel
On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote:
Hi,
we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine.
There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this:
| gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ].
I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ]
2) Also, when I take a new Image, I have to do several steps
load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load
I think this is not the best way, I would like to make it right.
Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows.
Regards Sabine
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
------------------------------------------------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...>
To start a new topic under Pharo Smalltalk Users, email [hidden email] </user/SendEmail.jtp?type=node&node=4953938&i=1> To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
------------------------------------------------------------------------ View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
Hi Thierry, changing my hostname into lowercase letters and changing from :spf to /spf fixed all my issues. The config file is read and so, the right port is found :-) This is so great, thank you all very much. I can proceed then wit the startup files. Regards Sabine 2017-07-08 0:09 GMT+02:00 Thierry Goubier [via Smalltalk] < ml+s1294792n4953950h45@n4.nabble.com>:
Hi Sabine,
as far as I remember when I implemented it, the use of a config file shouldn't be an issue, because GitFileTree rewrites exactly the git@SPF_GITLAB the way you would expect, as long as it manages to identify correctly the parts in the URL (and to identify those parts, it relies on Zinc).
Now, have you tried with:
gitfiletree://SPF_GITLAB/SPF/Spesenfuchs
?
Zinc correctly identifies SPF_GITLAB as the host, but it writes it non-capitalized (spf_gitlab), which may makes it miss your .ssh/config entry.
In that case, could you add the spf_gitlab entry as well in your config file ?
Thierry
Le 07/07/2017 à 21:32, Sabine Manaa a écrit :
Hi Thierry, Gabriel and Peter,
thank you very much. First I had a look at this because it would be nice to load directly from Gitlab (with then generating a local repository automatically):
spec repository: 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ <http://example.com/ANiceLib:master/>placeWhereAreThePackages';
I did not manage to use it because I would need to give a port as parameter (we do not use port 22). I chatted in discord with Peter Uhnak.
It seemed that this is not yet possible because of my case that i do not use port 22 and I use a config file.
On the command line, this command succeeds with cloning my repository from gitlab:
git clone git@SPF_GITLAB:SPF/Spesenfuchs.git
There is a config file which defines my host:
host SPF_GITLAB HostName 192.168.1.61 Port 30001
I try to write my baseline with this
spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'.
This did not work in the beginning.
I played around and found out that there are 2 points where I had to change the system to make this work:
1) ZnUrl>>parseHostPort: stream atEnd ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ ZnPortNotANumber signal ]. (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 to: 65535 ]." self port: 30001 "portNumber" ] ] ->> here, it is assumed that there is always a port integer after the : If i set it hard to my port I skip this problem
2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl here I changed the code also hard from
repo remoteUrl: 'git@' , aZnUrl host , ':' , path to repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git'
->> here, aUZnUrl host is in lowercase but my name is in uppercase :SPF is missing
the existing code would make this: git@spf_gitlab:Spesenfuchs.git instead of git@SPF_GITLAB:SPF/Spesenfuchs.git
With this 2 changes, my code could load.
So my question: Are this 2 points issues to fix or should I create my own workaround (create my own loader, not making THIS changes )?
Regards Sabine
2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] <[hidden email] </user/SendEmail.jtp?type=node&node=4953938&i=0>>:
Hi Sabine, for your own baseline you don't need to specify a repository. Just load it with something like:
Metacello new baseline: 'RLA24'; repository: 'filetree://disklocation/repository'; load: 'Group To Load'
Also you can have local copies of your dependencies in case you don't want to use an internet connection for dowloading, just use the lock command of Metacello to "overwrite" the repository definitions. For example take a look at:
https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f <https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f>
Regards, Gabriel
On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote:
Hi,
we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine.
There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this:
| gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository'
asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ].
I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ]
2) Also, when I take a new Image, I have to do several steps
load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load
I think this is not the best way, I would like to make it right.
Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows.
Regards Sabine
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-
gitfiletree-BaselineOf-tp4953877.html
gitfiletree-BaselineOf-tp4953877.html>
Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
------------------------------------------------------------------------
If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-
gitfiletree-BaselineOf-tp4953877p4953880.html
gitfiletree-BaselineOf-tp4953877p4953880.html>
To start a new topic under Pharo Smalltalk Users, email [hidden email] </user/SendEmail.jtp?type=node&node=4953938&i=1> To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?
macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml& base=nabble.naml.namespaces.BasicNamespace-nabble.view. web.template.NabbleNamespace-nabble.view.web.template. NodeNamespace&breadcrumbs=notify_subscribers%21nabble% 3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_ instant_email%21nabble%3Aemail.naml>
------------------------------------------------------------------------
View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4953938.html> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4953950.html To start a new topic under Pharo Smalltalk Users, email ml+s1294792n1310670h65@n4.nabble.com To unsubscribe from Pharo Smalltalk Users, click here <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&nod...> . NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
Hi, I had similar issues when using gitfiletree... and in the end I've ended up with this https://github.com/peteruhnak/pharo-scripts/blob/master/config/5.0/openponk-... it is not the prettiest thing, however it is automated so I didn't bother improving it. * automatically loads GitFileTree (I also load my own shell, because OSProcess was failing on me hard) * "pre-loads" some dependencies so they point to my local git repositories instead of being pulled from github * if BaselineOf is available in the image, then MC loader will use that (instead of grabbing code from bitbucket/gitlab/github) * #onWarningLog is there to suppress warning about loading from different source (local instead of github), but avialble in transcript iirc * startup script, so I could name the image certain way and it will prepare it for me * (obviously one can use it separately) * used on windows and linux (that's why the platform checking) Peter On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
Hi,
we have our own gitlab running now and I succeeded to move our code from sthub to it. I can push my new code into it from Pharo. All fine. I also created a Baseline (based on my former configurationOf). Loading the code from others (e.g. seaside) with this baseline is also fine.
There are 2 Points where I am sure it could be better (it is worse) 1) For loading my own code, I currently have a bad solution It is in the postLoadBaseline and does this:
| gitRepository | gitRepository := MCFileTreeRepository new directory: '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' asFileReference. {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} do: [ :each | Gofer it repository: gitRepository; package: each; load ].
I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. "here I load all the the oher stuff" spec package: 'RKA24-Model'; package: 'RKA24-System'; package: 'RKA24-Translator'; package: 'RKA24-View'; package: 'RKA24-Test'; package: 'RKA24-Report'; package: 'RKA24-Overwrites' ]
2) Also, when I take a new Image, I have to do several steps
load gitfiletree from catalog add/open my gitfiletree repository from Monticello load BaselineOfRKA24 manually with (BaselineOfRKA24 project map at: 'baseline') load
I think this is not the best way, I would like to make it right.
Can anyone give me some hints how to improve this two steps? I use Pharo 5 and I don't want to go to Pharo 6 right now. I develop on mac and production server is on windows.
Regards Sabine
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
1) For loading my own code, I currently have a bad solution I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here I use 'http://127.0.0.1:20080/', where the http server serves my filetree repo directory. The easiest way (for me on Linux/Mac) to get the http server running is 'python3 -m http.server 20080'.
This method works for a directory full of .mcz files too. Pierce
After several questions and trials I ended with a script like this: cd /Applications/Pharo5.0-7.app/Contents/Resources rm Pharo.image rm Pharo.changes curl get.pharo.org/50 | bash rm -rf spfClonedGitlabRepository git clone http://192.168.1.61:30000/SPF/Spesenfuchs.git --branch 1.0 spfClonedGitlabRepository Pharo Pharo.image --no-default-preferences eval --save "(CatalogProvider projectNamed: 'GitFileTree') installVersion: #stable. Metacello new baseline: 'RKA24'; repository: 'filetree://spfClonedGitlabRepository';load." It creates a local clone (of a certain version) of my gitlab repository (deleting old stuff before) and starts with a new image, loading the given branch. With this, I can always start with a new image, loading exactly the version I want from gitlab. For pushing into gitlab I use the MCFileTreeGitRepository browser and push. Big thank you for all who helped me, here and in discord. 2017-07-08 18:31 GMT+02:00 Pierce Ng-3 [via Smalltalk] < ml+s1294792n4954007h12@n4.nabble.com>:
On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
1) For loading my own code, I currently have a bad solution I would like to load it within my baseline like this below but I dont know what to write in the fileTreeRepository method...
baseline: spec <baseline> spec for: #common do: [ spec blessing: #baseline. spec repository: ##self fileTreeRepository##. ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here I use 'http://127.0.0.1:20080/', where the http server serves my filetree repo directory. The easiest way (for me on Linux/Mac) to get the http server running is 'python3 -m http.server 20080'.
This method works for a directory full of .mcz files too.
Pierce
------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4954007.html To start a new topic under Pharo Smalltalk Users, email ml+s1294792n1310670h65@n4.nabble.com To unsubscribe from Pharo Smalltalk Users, click here <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&nod...> . NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
Hi Sabine, I have a slightly different script, a Makefile, which uses another trick: put everything into a pharo/ subdirectory. Like that, just rm -rf pharo/ erases everything before rebuilding. I think I would implement the support you need for you to simply be able to write: Metacello new baseline: \'RKA24\'\; repository: \'gitfiletree://192.168.1.61:30000/SPF/Spesenfuchs.gitspf:1.0?protocol=http\'\;load so that the clone + Metacello over filetree isn't necessary. (at the moment, I'm just pretty sure GitFileTree doesn't handle http and the port number, but that wouldn't be hard to add) Regards, Thierry Le 11/07/2017 à 12:43, Sabine Manaa a écrit :
After several questions and trials I ended with a script like this:
cd /Applications/Pharo5.0-7.app/Contents/Resources rm Pharo.image rm Pharo.changes curl get.pharo.org/50 <http://get.pharo.org/50> | bash rm -rf spfClonedGitlabRepository git clone http://192.168.1.61:30000/SPF/Spesenfuchs.git <http://192.168.1.61:30000/SPF/Spesenfuchs.git> --branch 1.0 spfClonedGitlabRepository Pharo Pharo.image --no-default-preferences eval --save "(CatalogProvider projectNamed: 'GitFileTree') installVersion: #stable. Metacello new baseline: 'RKA24'; repository: 'filetree://spfClonedGitlabRepository';load."
It creates a local clone (of a certain version) of my gitlab repository (deleting old stuff before) and starts with a new image, loading the given branch.
With this, I can always start with a new image, loading exactly the version I want from gitlab.
For pushing into gitlab I use the MCFileTreeGitRepository browser and push.
Big thank you for all who helped me, here and in discord.
2017-07-08 18:31 GMT+02:00 Pierce Ng-3 [via Smalltalk] <[hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=0>>:
On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
> 1) For loading my own code, I currently have a bad solution > I would like to load it within my baseline like this below but I dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##. ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here I use 'http://127.0.0.1:20080/', where the http server serves my filetree repo directory. The easiest way (for me on Linux/Mac) to get the http server running is 'python3 -m http.server 20080'.
This method works for a directory full of .mcz files too.
Pierce
------------------------------------------------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...>
To start a new topic under Pharo Smalltalk Users, email [hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=1> To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
------------------------------------------------------------------------ View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
Hi Thierry, this would be nice and exactly what I was looking for. I ask myself if iceberg would be able to solve this/will it be able to solve it in a later version. Regards Sabine 2017-07-11 23:13 GMT+02:00 Thierry Goubier [via Smalltalk] < ml+s1294792n4954413h98@n4.nabble.com>:
Hi Sabine,
I have a slightly different script, a Makefile, which uses another trick: put everything into a pharo/ subdirectory. Like that, just rm -rf pharo/ erases everything before rebuilding.
I think I would implement the support you need for you to simply be able to write:
Metacello new baseline: \'RKA24\'\; repository: \'gitfiletree://192.168.1.61:30000/SPF/Spesenfuchs.gitspf: 1.0?protocol=http\ <http://192.168.1.61:30000/SPF/Spesenfuchs.gitspf:1.0?protocol=http%5C>'\;load
so that the clone + Metacello over filetree isn't necessary.
(at the moment, I'm just pretty sure GitFileTree doesn't handle http and the port number, but that wouldn't be hard to add)
Regards,
Thierry
Le 11/07/2017 à 12:43, Sabine Manaa a écrit :
After several questions and trials I ended with a script like this:
cd /Applications/Pharo5.0-7.app/Contents/Resources rm Pharo.image rm Pharo.changes curl get.pharo.org/50 <http://get.pharo.org/50> | bash rm -rf spfClonedGitlabRepository git clone http://192.168.1.61:30000/SPF/Spesenfuchs.git <http://192.168.1.61:30000/SPF/Spesenfuchs.git> --branch 1.0 spfClonedGitlabRepository Pharo Pharo.image --no-default-preferences eval --save "(CatalogProvider projectNamed: 'GitFileTree') installVersion: #stable. Metacello new baseline: 'RKA24'; repository: 'filetree://spfClonedGitlabRepository';load."
It creates a local clone (of a certain version) of my gitlab repository (deleting old stuff before) and starts with a new image, loading the given branch.
With this, I can always start with a new image, loading exactly the version I want from gitlab.
For pushing into gitlab I use the MCFileTreeGitRepository browser and
push.
Big thank you for all who helped me, here and in discord.
2017-07-08 18:31 GMT+02:00 Pierce Ng-3 [via Smalltalk] <[hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=0>>:
On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
> 1) For loading my own code, I currently have a bad solution > I would like to load it within my baseline like this below but I
dont know
> what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Here I use 'http://127.0.0.1:20080/', where the http server serves my filetree repo directory. The easiest way (for me on Linux/Mac) to get the http server running is 'python3 -m http.server 20080'.
This method works for a directory full of .mcz files too.
Pierce
------------------------------------------------------------------------
If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-
gitfiletree-BaselineOf-tp4953877p4954007.html
gitfiletree-BaselineOf-tp4953877p4954007.html>
To start a new topic under Pharo Smalltalk Users, email [hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=1> To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?
macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml& base=nabble.naml.namespaces.BasicNamespace-nabble.view. web.template.NabbleNamespace-nabble.view.web.template. NodeNamespace&breadcrumbs=notify_subscribers%21nabble% 3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_ instant_email%21nabble%3Aemail.naml>
------------------------------------------------------------------------
View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4954305.html> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4954413.html To start a new topic under Pharo Smalltalk Users, email ml+s1294792n1310670h65@n4.nabble.com To unsubscribe from Pharo Smalltalk Users, click here <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&nod...> . NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
I have another approach (possibly similar) - as gitlab has already checked out the code for you you simply need to point to it? - rm -rf build. # gitlab can cache the build directory - mkdir build - cp scripts/* build - cd build - curl get.pharo.org/64/ | bash - ./pharo Pharo.image --no-default-preferences --save --quit st loadLocal.st Where loadLocal.st <http://loadlocal.st/> is in a /scripts directory checked into gitlab, and /src is where my normal Pharo Iceberg packages are checked in. loadLocal.st <http://loadlocal.st/> is simply: "CmdLine script to load project" Metacello new repository: 'filetree://../src'; baseline: 'Lambda'; load. Tim
On 12 Jul 2017, at 06:49, Sabine Manaa <manaa.sabine@gmail.com> wrote:
Hi Thierry,
this would be nice and exactly what I was looking for.
I ask myself if iceberg would be able to solve this/will it be able to solve it in a later version.
Regards Sabine
2017-07-11 23:13 GMT+02:00 Thierry Goubier [via Smalltalk] <[hidden email] <x-msg://253/user/SendEmail.jtp?type=node&node=4954475&i=0>>: Hi Sabine,
I have a slightly different script, a Makefile, which uses another trick: put everything into a pharo/ subdirectory. Like that, just rm -rf pharo/ erases everything before rebuilding.
I think I would implement the support you need for you to simply be able to write:
Metacello new baseline: \'RKA24\'\; repository: \'gitfiletree://192.168.1.61:30000/SPF/Spesenfuchs.gitspf:1.0?protocol=http\ <http://192.168.1.61:30000/SPF/Spesenfuchs.gitspf:1.0?protocol=http%5C>'\;load
so that the clone + Metacello over filetree isn't necessary.
(at the moment, I'm just pretty sure GitFileTree doesn't handle http and the port number, but that wouldn't be hard to add)
Regards,
Thierry
Le 11/07/2017 à 12:43, Sabine Manaa a écrit :
After several questions and trials I ended with a script like this:
cd /Applications/Pharo5.0-7.app/Contents/Resources rm Pharo.image rm Pharo.changes curl get.pharo.org/50 <http://get.pharo.org/50> <http://get.pharo.org/50 <http://get.pharo.org/50>> | bash rm -rf spfClonedGitlabRepository
git clone http://192.168.1.61:30000/SPF/Spesenfuchs.git <http://192.168.1.61:30000/SPF/Spesenfuchs.git> <http://192.168.1.61:30000/SPF/Spesenfuchs.git <http://192.168.1.61:30000/SPF/Spesenfuchs.git>> --branch 1.0 spfClonedGitlabRepository Pharo Pharo.image --no-default-preferences eval --save "(CatalogProvider projectNamed: 'GitFileTree') installVersion: #stable. Metacello new baseline: 'RKA24'; repository: 'filetree://spfClonedGitlabRepository';load."
It creates a local clone (of a certain version) of my gitlab repository (deleting old stuff before) and starts with a new image, loading the given branch.
With this, I can always start with a new image, loading exactly the version I want from gitlab.
For pushing into gitlab I use the MCFileTreeGitRepository browser and push.
Big thank you for all who helped me, here and in discord.
2017-07-08 18:31 GMT+02:00 Pierce Ng-3 [via Smalltalk] <[hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=0>>:
On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
> 1) For loading my own code, I currently have a bad solution > I would like to load it within my baseline like this below but I dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##. ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here I use 'http://127.0.0.1:20080/' <http://127.0.0.1:20080/'>, where the http server serves my filetree repo directory. The easiest way (for me on Linux/Mac) to get the http server running is 'python3 -m http.server 20080'.
This method works for a directory full of .mcz files too.
Pierce
------------------------------------------------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp4953877p4954007.html>>
To start a new topic under Pharo Smalltalk Users, email [hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=1> To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant... <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>>
------------------------------------------------------------------------ View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp4953877p4954305.html>> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html>> at Nabble.com.
If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> To start a new topic under Pharo Smalltalk Users, email [hidden email] <x-msg://253/user/SendEmail.jtp?type=node&node=4954475&i=1> To unsubscribe from Pharo Smalltalk Users, click here <applewebdata://118A2E53-E02F-4BAB-BB68-1297E08C343C>. NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
Hi Thierry, when I take a new Pharo5 Image and do Metacello new baseline: 'FileTree'; repository: 'github://dalehenrich/filetree:pharo5.0_dev'; load I get the following error; "Could not resolve: BaselineOfFileTree [BaselineOfFileTree] in /Applications/Pharo5.0-7.app/Contents/Resources/package-cache github://dalehenrich/filetree:pharo5.0_dev" When I look in the directory, I see, that the files are in the /github-cache and not in the /package-cache. Did I miss something? Regards Sabine 2017-07-12 22:15 GMT+02:00 Tim Mackinnon [via Smalltalk] < ml+s1294792n4954619h84@n4.nabble.com>:
I have another approach (possibly similar) - as gitlab has already checked out the code for you you simply need to point to it?
- rm -rf build. # gitlab can cache the build directory - mkdir build - cp scripts/* build
- cd build - curl get.pharo.org/64/ | bash - ./pharo Pharo.image --no-default-preferences --save --quit st loadLocal.st
Where loadLocal.st is in a /scripts directory checked into gitlab, and /src is where my normal Pharo Iceberg packages are checked in. loadLocal.st is simply:
"CmdLine script to load project"
Metacello new repository: '<a href="filetree://../src" class="">filetree://../src'; baseline: 'Lambda'; load.
Tim
On 12 Jul 2017, at 06:49, Sabine Manaa <[hidden email] <http:///user/SendEmail.jtp?type=node&node=4954619&i=0>> wrote:
Hi Thierry,
this would be nice and exactly what I was looking for.
I ask myself if iceberg would be able to solve this/will it be able to solve it in a later version.
Regards Sabine
2017-07-11 23:13 GMT+02:00 Thierry Goubier [via Smalltalk] <<a href="x-msg://253/user/SendEmail.jtp?type=node&node=4954475&i=0" target="_top" rel="nofollow" link="external" class="">[hidden email]>:
Hi Sabine,
I have a slightly different script, a Makefile, which uses another trick: put everything into a pharo/ subdirectory. Like that, just rm -rf pharo/ erases everything before rebuilding.
I think I would implement the support you need for you to simply be able to write:
Metacello new baseline: \'RKA24\'\; repository: \'gitfiletree://192.168.1.61:30000/SPF/Spesenfuchs.gitspf:1. 0?protocol=http\ <http://192.168.1.61:30000/SPF/Spesenfuchs.gitspf:1.0?protocol=http%5C>'\;load
so that the clone + Metacello over filetree isn't necessary.
(at the moment, I'm just pretty sure GitFileTree doesn't handle http and the port number, but that wouldn't be hard to add)
Regards,
Thierry
Le 11/07/2017 à 12:43, Sabine Manaa a écrit :
After several questions and trials I ended with a script like this:
cd /Applications/Pharo5.0-7.app/Contents/Resources rm Pharo.image rm Pharo.changes curl get.pharo.org/50 <http://get.pharo.org/50> | bash rm -rf spfClonedGitlabRepository
git clone http://192.168.1.61:30000/SPF/Spesenfuchs.git <http://192.168.1.61:30000/SPF/Spesenfuchs.git> --branch 1.0 spfClonedGitlabRepository Pharo Pharo.image --no-default-preferences eval --save "(CatalogProvider projectNamed: 'GitFileTree') installVersion: #stable. Metacello new baseline: 'RKA24'; repository: 'filetree://spfClonedGitlabRepository';load."
It creates a local clone (of a certain version) of my gitlab repository (deleting old stuff before) and starts with a new image, loading the given branch.
With this, I can always start with a new image, loading exactly the version I want from gitlab.
For pushing into gitlab I use the MCFileTreeGitRepository browser and
push.
Big thank you for all who helped me, here and in discord.
2017-07-08 18:31 GMT+02:00 Pierce Ng-3 [via Smalltalk] <[hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=0>>:
On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote:
> 1) For loading my own code, I currently have a bad solution > I would like to load it within my baseline like this below but I
dont know
> what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Here I use 'http://127.0.0.1:20080/', where the http server serves my filetree repo directory. The easiest way (for me on Linux/Mac) to get the http server running is 'python3 -m http.server 20080'.
This method works for a directory full of .mcz files too.
Pierce
------------------------------------------------------------------------
If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-
BaselineOf-tp4953877p4954007.html
<http://forum.world.st/2-questions-around-gitlab-gitfiletree
-BaselineOf-tp4953877p4954007.html>
To start a new topic under Pharo Smalltalk Users, email [hidden email] </user/SendEmail.jtp?type=node&node=4954305&i=1> To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_
viewer&id=instant_html%21nabble%3Aemail.naml&base= nabble.naml.namespaces.BasicNamespace-nabble.view.web. template.NabbleNamespace-nabble.view.web.template.NodeNamesp ace&breadcrumbs=notify_subscribers%21nabble%3Aemail. naml-instant_emails%21nabble%3Aemail.naml-send_instant_ email%21nabble%3Aemail.naml>
------------------------------------------------------------------------
View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree -BaselineOf-tp4953877p4954305.html> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree- BaselineOf-tp4953877p4954413.html To start a new topic under Pharo Smalltalk Users, email <a href="x-msg://253/user/SendEmail.jtp?type=node&node=4954475&i=1" target="_top" rel="nofollow" link="external" class="">[hidden email] To unsubscribe from Pharo Smalltalk Users, click here. NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
------------------------------ View this message in context: Re: 2 questions around gitlab, gitfiletree, BaselineOf <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495...> Sent from the Pharo Smalltalk Users mailing list archive <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.
------------------------------ If you reply to this email, your message will be added to the discussion below: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- tp4953877p4954619.html To start a new topic under Pharo Smalltalk Users, email ml+s1294792n1310670h65@n4.nabble.com To unsubscribe from Pharo Smalltalk Users, click here <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&nod...> . NAML <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instant...>
-- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp495... Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.
participants (6)
-
Gabriel Cotelli -
Peter Uhnak -
Pierce Ng -
Sabine Manaa -
Thierry Goubier -
Tim Mackinnon