Hi Juan, Hi All, On Mon, Mar 6, 2017 at 6:06 AM, Juan Vuletich <JuanVuletich@zoho.com> wrote:

I finally understood what was happening. The problem with is primitive 136:

primSignal: aSemaphore atMilliseconds: aSmallInteger "Signal the semaphore when the millisecond clock reaches the value of the second argument. Fail if the first argument is neither a Semaphore nor nil. Essential. See Object documentation whatIsAPrimitive." <primitive: 136> ^self primitiveFailed

Yes, but primitive 136 *should not be used* :-). You should use primitive 242: primSignal: aSemaphore atUTCMicroseconds: anInteger "Signal the semaphore when the UTC microsecond clock reaches the value of the second argument. Fail if the first argument is neither a Semaphore nor nil, or if the second argument is not an integer. Essential. See Object documentation whatIsAPrimitive." <primitive: 242> ^self primitiveFailed The use of the UTC microsecond count eliminates any and all wrapping issues for about 50,000 years [puhleaze Mr Pruitt can you try and do your bit to make it possible that we'll make it that far. hic. ed.]. The old primitive 136 primSignal:atMilliseconds: is subject to wrapping problems. I see that primSignal:atMilliseconds: is still used in Squeak 5.x but only to turn off signaling: Delay class>>shutDown "Suspend the active delay, if any, before snapshotting. It will be reactived when the snapshot is resumed." "Details: This prevents a timer interrupt from waking up the active delay in the midst snapshoting, since the active delay will be restarted when resuming the snapshot and we don't want to process the delay twice." AccessProtect wait. self primSignal: nil atMilliseconds: 0. self saveResumptionTimes. DelaySuspended := true. Delay class>>stopTimerInterruptWatcher "Reset the class variables that keep track of active Delays and re-start the timer interrupt watcher process. Any currently scheduled delays are forgotten." "Delay startTimerInterruptWatcher" self primSignal: nil atMilliseconds: 0. TimingSemaphore ifNotNil:[TimingSemaphore terminateProcess]. I will change this now. HTH

If the requested tick is already in the past, all the VMs except for Spur-64 will signal the semaphore anyway. Spur-64 won't. Taking care of this in the Cuis image was easy enough.

Squeak seems not to be affected because it uses a newer primitive, that takes the large integer microsecond ticker, that might have the older behavior (signaling anyway). I'm not really sure, and maybe someone could check the primitive behavior and the corresponding assumptions in Squeak.

Older Squeak images are not affected, as they are all 32-bit. So maybe there's no action required. In any case, making the behavior consistent across VMs and in both primitives would be nice.

Cheers,

On 3/3/2017 3:55 PM, Juan Vuletich wrote:

Hi Folks,

Today, I was able to get closer to the origin of the problem. The problem is when Morphic tries to do a Delay (inter-cycle-pause) of 1 or two milliseconds. (Usually they are quite larger, and the problem does not appear). With the 64-bit VM, sometimes very short delays hang the complete system. I don't know why, but this:

waitDelay _ Delay forMilliseconds: 50. [ true ] whileTrue: [ 1000 atRandom print. waitDelay setDelay: 1; wait ].

is enough to hang Cuis in a short time. When trying to reproduce the problem in Squeak I had mixed results. It doesn't seem to hang there, but if I let this run for a couple of minutes and then try to halt with alt-. , then the hang occurs, and Squeak becomes irresponsibe. As a workaround, in Cuis in the inter cycle pause, I'm avoiding very short delays.

I'm not sure if the bug is in the VM, in the image, or both, but it is still there, and it also affects Squeak. I haven't tried it, but Pharo might also have the problem (if not, it can show a possible solution).

BTW, Bert, I guess Squeak never does short delays in #interCyclePause: ...

Thanks,

On 2/6/2017 12:28 PM, Bert Freudenberg wrote:

Yes, I tried with Spur64. Have not seen it freeze yet on Mac in Squeak, but we possibly have not replicated the test well enough yet.

It *did* freeze in Cuis Spur64 on Mac too.

- Bert -

On Mon, Feb 6, 2017 at 2:08 PM, Juan Vuletich <juanvuletich@zoho.com> wrote:

...

Were you usig Spur64? On Debian it does not freeze with CogV3 or Spur32. Only with Spur64.

Thanks, Juan

Sent using Zoho Mail <https://www.zoho.com/mail/>

---- On Mon, 06 Feb 2017 09:19:48 -0300 * bert@freudenbergs.de <bert@freudenbergs.de> * wrote ----

On Mon, Feb 6, 2017 at 3:15 AM, David T. Lewis <lewis@mail.msen.com> wrote:

It would be interesting to try reproducing this in a Squeak image, but I have not quite figured out how to make the Tokenish example work in Squeak.

See attachment. Did not freeze on Mac with 10 Tokenish jumping. - Bert -

-- Juan Vuletichwww.cuis-smalltalk.orghttps://github.com/Cuis-Smalltalk/Cuis-Smalltalk-Dev @JuanVuletich

-- Juan Vuletichwww.cuis-smalltalk.orghttps://github.com/Cuis-Smalltalk/Cuis-Smalltalk-Dev @JuanVuletich

-- _,,,^..^,,,_ best, Eliot