[Pharo-project] Horizontal wheel
hi! Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it... http://code.google.com/p/pharo/issues/detail?id=4752 Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
I can add the support if you can work out what the VM sends as key/char codes... ;-) Regards, Gary ----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
We need a VM expert... I am sure there is a good soul on the mailing list. Alexandre On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Historically, VMs are not generating mouse wheel events, instead they interpreting OS events and generating ctrl-up/ctrl-down key events. To instroduce horizontal wheel , a changes to VM is needed. On 2 September 2011 16:39, Alexandre Bergel <alexandre.bergel@me.com> wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel  http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel  http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- Best regards, Igor Stasenko AKA sig.
for at least MAC OS it seems to be very cool :) to support the trackpads I cannot imagine that other platforms don't make use of trackpads yes a good soul is wanted Am 02.09.2011 um 15:45 schrieb Igor Stasenko:
Historically, VMs are not generating mouse wheel events, instead they interpreting OS events and generating ctrl-up/ctrl-down key events.
To instroduce horizontal wheel , a changes to VM is needed.
On 2 September 2011 16:39, Alexandre Bergel <alexandre.bergel@me.com> wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- Best regards, Igor Stasenko AKA sig.
On 2 September 2011 16:52, Johannes Rasche <johannesrasche@mac.com> wrote:
for at least MAC OS it seems to be very cool :) to support the trackpads I cannot imagine that other platforms don't make use of trackpads yes a good soul is wanted Am 02.09.2011 um 15:45 schrieb Igor Stasenko:
Well, cocoa vms are handling horizontal wheel events: ===== - (void) recordWheelEvent:(NSEvent *) theEvent fromView: (sqSqueakOSXNSView *) aView{ [self recordMouseEvent: theEvent fromView: aView]; CGFloat x = [theEvent deltaX]; CGFloat y = [theEvent deltaY]; if (x != 0.0f) { [self fakeMouseWheelKeyboardEventsKeyCode: (x < 0 ? 124 : 123) ascii: (x < 0 ? 29 : 28) windowIndex: (int) aView.windowLogic.windowIndex]; } if (y != 0.0f) { [self fakeMouseWheelKeyboardEventsKeyCode: (y < 0 ? 125 : 126) ascii: (y < 0 ? 31 : 30) windowIndex: (int) aView.windowLogic.windowIndex]; } } ===== so, a key code is 125 or 126 and char code 31 or 30. it remains to figure out, if image actually handling those. -- Best regards, Igor Stasenko AKA sig.
Not yet. I retrofitted the fake keys to be reified as a mouse wheel event. Even included a possible "direction" for just this eventualtity! I'll see if it can work on Windows/Linux next week. Regards, Gary ----- Original Message ----- From: "Igor Stasenko" <siguctua@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 3:01 PM Subject: Re: [Pharo-project] Horizontal wheel
On 2 September 2011 16:52, Johannes Rasche <johannesrasche@mac.com> wrote:
for at least MAC OS it seems to be very cool :) to support the trackpads I cannot imagine that other platforms don't make use of trackpads yes a good soul is wanted Am 02.09.2011 um 15:45 schrieb Igor Stasenko:
Well, cocoa vms are handling horizontal wheel events: ===== - (void) recordWheelEvent:(NSEvent *) theEvent fromView: (sqSqueakOSXNSView *) aView{
[self recordMouseEvent: theEvent fromView: aView]; CGFloat x = [theEvent deltaX]; CGFloat y = [theEvent deltaY];
if (x != 0.0f) { [self fakeMouseWheelKeyboardEventsKeyCode: (x < 0 ? 124 : 123) ascii: (x < 0 ? 29 : 28) windowIndex: (int) aView.windowLogic.windowIndex]; } if (y != 0.0f) { [self fakeMouseWheelKeyboardEventsKeyCode: (y < 0 ? 125 : 126) ascii: (y < 0 ? 31 : 30) windowIndex: (int) aView.windowLogic.windowIndex]; } } =====
so, a key code is 125 or 126 and char code 31 or 30.
it remains to figure out, if image actually handling those.
-- Best regards, Igor Stasenko AKA sig.
Indeed, Igor. Curious what events we get from a horizontal wheel... possibly platform dependent too. (could possibly test when in office with a mouse that has left-right wheel clickers) Regards, Gary ----- Original Message ----- From: "Igor Stasenko" <siguctua@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:45 PM Subject: Re: [Pharo-project] Horizontal wheel Historically, VMs are not generating mouse wheel events, instead they interpreting OS events and generating ctrl-up/ctrl-down key events. To instroduce horizontal wheel , a changes to VM is needed. On 2 September 2011 16:39, Alexandre Bergel <alexandre.bergel@me.com> wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- Best regards, Igor Stasenko AKA sig.
Thanks guys for considering this. Alexandre On 2 Sep 2011, at 11:02, Gary Chambers wrote:
Indeed, Igor.
Curious what events we get from a horizontal wheel... possibly platform dependent too. (could possibly test when in office with a mouse that has left-right wheel clickers)
Regards, Gary
----- Original Message ----- From: "Igor Stasenko" <siguctua@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:45 PM Subject: Re: [Pharo-project] Horizontal wheel
Historically, VMs are not generating mouse wheel events, instead they interpreting OS events and generating ctrl-up/ctrl-down key events.
To instroduce horizontal wheel , a changes to VM is needed.
On 2 September 2011 16:39, Alexandre Bergel <alexandre.bergel@me.com> wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- Best regards, Igor Stasenko AKA sig.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
no you should just write the transcript the events have a look at HandMorph handle event method. Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Or make a "ShowEventsTester" morph ;-) Regards, Gary ----- Original Message ----- From: "Stéphane Ducasse" <stephane.ducasse@inria.fr> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:35 PM Subject: Re: [Pharo-project] Horizontal wheel no you should just write the transcript the events have a look at HandMorph handle event method. Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Perhaps worth checking out various keyboard "zoom" controllers too... Regards, Gary ----- Original Message ----- From: "Gary Chambers" <gazzaguru2@btinternet.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:57 PM Subject: Re: [Pharo-project] Horizontal wheel
Or make a "ShowEventsTester" morph ;-)
Regards, Gary
----- Original Message ----- From: "Stéphane Ducasse" <stephane.ducasse@inria.fr> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:35 PM Subject: Re: [Pharo-project] Horizontal wheel
no you should just write the transcript the events have a look at HandMorph handle event method.
Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Not sure how it would translate but would be nice to get proper events for such things, handle on the image side... Regards, Gary ----- Original Message ----- From: "Gary Chambers" <gazzaguru2@btinternet.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:57 PM Subject: Re: [Pharo-project] Horizontal wheel
Or make a "ShowEventsTester" morph ;-)
Regards, Gary
----- Original Message ----- From: "Stéphane Ducasse" <stephane.ducasse@inria.fr> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:35 PM Subject: Re: [Pharo-project] Horizontal wheel
no you should just write the transcript the events have a look at HandMorph handle event method.
Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
On Sep 2, 2011, at 6:44 PM, Gary Chambers wrote:
Not sure how it would translate but would be nice to get proper events for such things, handle on the image side...
yes if you have 5 min have a look at what we started to do with igor (still really preliminary) EventModel/EventModel on squeaksource Gofer new squeaksource:'EventModel'; package: 'EventModel'; load We started to reify raw VM event to avoid to have raw buffer spreading terrible code around. After the idea will be to generate more complex events based on the raw ones + introducing double dispatch instead all the ifTrueifFalse....
Regards, Gary
----- Original Message ----- From: "Gary Chambers" <gazzaguru2@btinternet.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:57 PM Subject: Re: [Pharo-project] Horizontal wheel
Or make a "ShowEventsTester" morph ;-)
Regards, Gary
----- Original Message ----- From: "Stéphane Ducasse" <stephane.ducasse@inria.fr> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:35 PM Subject: Re: [Pharo-project] Horizontal wheel
no you should just write the transcript the events have a look at HandMorph handle event method.
Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Only the category EventModel-System is what we are doing the other was done by mike in iSqueak. Stef On Sep 3, 2011, at 8:41 AM, Stéphane Ducasse wrote:
On Sep 2, 2011, at 6:44 PM, Gary Chambers wrote:
Not sure how it would translate but would be nice to get proper events for such things, handle on the image side...
yes if you have 5 min have a look at what we started to do with igor (still really preliminary)
EventModel/EventModel on squeaksource
Gofer new squeaksource:'EventModel'; package: 'EventModel'; load
We started to reify raw VM event to avoid to have raw buffer spreading terrible code around. After the idea will be to generate more complex events based on the raw ones + introducing double dispatch instead all the ifTrueifFalse....
Regards, Gary
----- Original Message ----- From: "Gary Chambers" <gazzaguru2@btinternet.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:57 PM Subject: Re: [Pharo-project] Horizontal wheel
Or make a "ShowEventsTester" morph ;-)
Regards, Gary
----- Original Message ----- From: "Stéphane Ducasse" <stephane.ducasse@inria.fr> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:35 PM Subject: Re: [Pharo-project] Horizontal wheel
no you should just write the transcript the events have a look at HandMorph handle event method.
Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
On Sep 2, 2011, at 5:57 PM, Gary Chambers wrote:
Or make a "ShowEventsTester" morph ;-)
if you have one Im interested becaue from time to time I rewriting all the events handling.
Regards, Gary
----- Original Message ----- From: "Stéphane Ducasse" <stephane.ducasse@inria.fr> To: <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 4:35 PM Subject: Re: [Pharo-project] Horizontal wheel
no you should just write the transcript the events have a look at HandMorph handle event method.
Stef On Sep 2, 2011, at 3:39 PM, Alexandre Bergel wrote:
We need a VM expert... I am sure there is a good soul on the mailing list.
Alexandre
On 2 Sep 2011, at 10:31, Gary Chambers wrote:
I can add the support if you can work out what the VM sends as key/char codes... ;-)
Regards, Gary
----- Original Message ----- From: "Alexandre Bergel" <alexandre.bergel@me.com> To: "Pharo Development" <Pharo-project@lists.gforge.inria.fr> Sent: Friday, September 02, 2011 2:06 PM Subject: [Pharo-project] Horizontal wheel
hi!
Pharo supports the vertical wheel. I can use my moose wheel to scroll over a list. However, the horizontal wheel does not seem supported. It would be very cool to have it...
http://code.google.com/p/pharo/issues/detail?id=4752
Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
participants (5)
-
Alexandre Bergel -
Gary Chambers -
Igor Stasenko -
Johannes Rasche -
Stéphane Ducasse