[Pharo-project] splitters in table layout
Hi, I would like to have splitters used inside a table layout, but I cannot seem to manage. In particular, I would like to have these splitters work with the GeneralScrollPane. I tried something like below, but it seems that the splitters expect a frame layout. What can I do about it? | m scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addPaneSplitters. scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow. Cheers, Doru -- www.tudorgirba.com "Speaking louder won't make the point worthier."
Splitters only work with proportional layouts due to the way they work. Also, since shrink wrap uses the min width/height and splitters have to work by effectively changing the position or extent of adjacent morphs (not min), things are more limited. Can you describe the effect you wish to achieve? Regards, Gary ----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: "Pharo-project@lists.gforge.inria.fr Development" <pharo-project@lists.gforge.inria.fr> Sent: Sunday, January 16, 2011 12:16 PM Subject: [Pharo-project] splitters in table layout Hi, I would like to have splitters used inside a table layout, but I cannot seem to manage. In particular, I would like to have these splitters work with the GeneralScrollPane. I tried something like below, but it seems that the splitters expect a frame layout. What can I do about it? | m scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addPaneSplitters. scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow. Cheers, Doru -- www.tudorgirba.com "Speaking louder won't make the point worthier."
Hi Gary, I wish to achieve the effect from the panes inside the OSX Finder. Suppose that I have two panes vertically stretched and horizontally stacked in a GeneralScrollbar with a splitter in between. When I drag the splitter, the first panel should extend and push the second one. So, basically, if we have shrinkWrap, I would like the splitter to resize the morph. Cheers, Doru On 17 Jan 2011, at 12:18, Gary Chambers wrote:
Splitters only work with proportional layouts due to the way they work. Also, since shrink wrap uses the min width/height and splitters have to work by effectively changing the position or extent of adjacent morphs (not min), things are more limited.
Can you describe the effect you wish to achieve?
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: "Pharo-project@lists.gforge.inria.fr Development" <pharo-project@lists.gforge.inria.fr> Sent: Sunday, January 16, 2011 12:16 PM Subject: [Pharo-project] splitters in table layout
Hi,
I would like to have splitters used inside a table layout, but I cannot seem to manage. In particular, I would like to have these splitters work with the GeneralScrollPane. I tried something like below, but it seems that the splitters expect a frame layout.
What can I do about it?
| m scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addPaneSplitters.
scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow.
Cheers, Doru
-- www.tudorgirba.com
"Speaking louder won't make the point worthier."
-- www.tudorgirba.com "What we can governs what we wish."
Hi Doru, this appears to be what you want.... | m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow. Sorry that the edge grip works with minimumExtent (as opposed to minWidth and minHeight). Should clean things up sometime, isn't Morphic fun! Regards, Gary ----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Monday, January 17, 2011 10:34 PM Subject: Re: [Pharo-project] splitters in table layout Hi Gary, I wish to achieve the effect from the panes inside the OSX Finder. Suppose that I have two panes vertically stretched and horizontally stacked in a GeneralScrollbar with a splitter in between. When I drag the splitter, the first panel should extend and push the second one. So, basically, if we have shrinkWrap, I would like the splitter to resize the morph. Cheers, Doru On 17 Jan 2011, at 12:18, Gary Chambers wrote:
Splitters only work with proportional layouts due to the way they work. Also, since shrink wrap uses the min width/height and splitters have to work by effectively changing the position or extent of adjacent morphs (not min), things are more limited.
Can you describe the effect you wish to achieve?
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: "Pharo-project@lists.gforge.inria.fr Development" <pharo-project@lists.gforge.inria.fr> Sent: Sunday, January 16, 2011 12:16 PM Subject: [Pharo-project] splitters in table layout
Hi,
I would like to have splitters used inside a table layout, but I cannot seem to manage. In particular, I would like to have these splitters work with the GeneralScrollPane. I tried something like below, but it seems that the splitters expect a frame layout.
What can I do about it?
| m scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addPaneSplitters.
scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow.
Cheers, Doru
-- www.tudorgirba.com
"Speaking louder won't make the point worthier."
-- www.tudorgirba.com "What we can governs what we wish."
Thanks, Gary! That is exactly what I need. Cheers, Doru On 18 Jan 2011, at 12:27, Gary Chambers wrote:
Hi Doru, this appears to be what you want....
| m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill).
scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow.
Sorry that the edge grip works with minimumExtent (as opposed to minWidth and minHeight). Should clean things up sometime, isn't Morphic fun!
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Monday, January 17, 2011 10:34 PM Subject: Re: [Pharo-project] splitters in table layout
Hi Gary,
I wish to achieve the effect from the panes inside the OSX Finder. Suppose that I have two panes vertically stretched and horizontally stacked in a GeneralScrollbar with a splitter in between. When I drag the splitter, the first panel should extend and push the second one.
So, basically, if we have shrinkWrap, I would like the splitter to resize the morph.
Cheers, Doru
On 17 Jan 2011, at 12:18, Gary Chambers wrote:
Splitters only work with proportional layouts due to the way they work. Also, since shrink wrap uses the min width/height and splitters have to work by effectively changing the position or extent of adjacent morphs (not min), things are more limited.
Can you describe the effect you wish to achieve?
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: "Pharo-project@lists.gforge.inria.fr Development" <pharo-project@lists.gforge.inria.fr> Sent: Sunday, January 16, 2011 12:16 PM Subject: [Pharo-project] splitters in table layout
Hi,
I would like to have splitters used inside a table layout, but I cannot seem to manage. In particular, I would like to have these splitters work with the GeneralScrollPane. I tried something like below, but it seems that the splitters expect a frame layout.
What can I do about it?
| m scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addMorphBack: (PanelMorph new minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). m addPaneSplitters.
scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow.
Cheers, Doru
-- www.tudorgirba.com
"Speaking louder won't make the point worthier."
-- www.tudorgirba.com
"What we can governs what we wish."
-- www.tudorgirba.com "Every thing should have the right to be different."
Hi, Am 18.01.11 12:27, schrieb Gary Chambers:
| m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill).
scroll := GeneralScrollPane new changeScrollerTableLayout; In my Pharo-1.1 and 1.2 images GeneralScrollPane>>changeScrollerTableLayout is not available. Did I miss something?
Regards, Andreas
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one). Cheers, Doru On 18 Jan 2011, at 20:50, Andreas Wacknitz wrote:
Hi,
Am 18.01.11 12:27, schrieb Gary Chambers:
| m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill).
scroll := GeneralScrollPane new changeScrollerTableLayout; In my Pharo-1.1 and 1.2 images GeneralScrollPane>>changeScrollerTableLayout is not available. Did I miss something?
Regards, Andreas
-- www.tudorgirba.com "Every thing should have the right to be different."
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter... Regards, Andreas
That is strange. Are you using Pharo 1.2? Cheers, Doru On 18 Jan 2011, at 21:33, Andreas Wacknitz wrote:
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com "To lead is not to demand things, it is to make them happen."
Am 19.01.11 09:54, schrieb Tudor Girba:
That is strange. Are you using Pharo 1.2? Yes (pharo-dev at 12303).
Andreas
Cheers, Doru
On 18 Jan 2011, at 21:33, Andreas Wacknitz wrote:
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
Strange. I just did the followings and it worked just fine: 1. downloaded 12303: https://pharo-ic.lille.inria.fr/hudson/view/Pharo/job/Pharo%201.2/67/artifac... 2. filed in the attached CS 3. executed | m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow. Cheers, Doru On 19 Jan 2011, at 20:10, Andreas Wacknitz wrote:
Am 19.01.11 09:54, schrieb Tudor Girba:
That is strange. Are you using Pharo 1.2? Yes (pharo-dev at 12303).
Andreas
Cheers, Doru
On 18 Jan 2011, at 21:33, Andreas Wacknitz wrote:
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com "In a world where everything is moving ever faster, one might have better chances to win by moving slower."
Strange. I just did the followings and it worked just fine: 1. downloaded 12303: https://pharo-ic.lille.inria.fr/hudson/view/Pharo/job/Pharo%201.2/67/artifac... 2. filed in the attached CS 3. executed | m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill). scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow. Cheers, Doru On 19 Jan 2011, at 20:10, Andreas Wacknitz wrote:
Am 19.01.11 09:54, schrieb Tudor Girba:
That is strange. Are you using Pharo 1.2? Yes (pharo-dev at 12303).
Andreas
Cheers, Doru
On 18 Jan 2011, at 21:33, Andreas Wacknitz wrote:
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com "In a world where everything is moving ever faster, one might have better chances to win by moving slower."
Am 19.01.2011 um 21:01 schrieb Tudor Girba:
Strange. I just did the followings and it worked just fine:
1. downloaded 12303: https://pharo-ic.lille.inria.fr/hudson/view/Pharo/job/Pharo%201.2/67/artifac...
2. filed in the attached CS
3. executed
| m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill).
scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow.
Cheers, Doru
<GeneralScrollPaneLayout.2.cs>
Hi Doru, I repeated your steps from above. When I execute the code in a Workspace a little dialog will open. It has a horizontal scroll bar that I can use. As soon as I move the splitter I will get the aforementioned DNU. I am on Mac OS 10.6.6. Regards, Andreas
On 19 Jan 2011, at 20:10, Andreas Wacknitz wrote:
Am 19.01.11 09:54, schrieb Tudor Girba:
That is strange. Are you using Pharo 1.2? Yes (pharo-dev at 12303).
Andreas
Cheers, Doru
On 18 Jan 2011, at 21:33, Andreas Wacknitz wrote:
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"In a world where everything is moving ever faster, one might have better chances to win by moving slower."
Indeed, you are right! This happens in the Pharo 1.2 12303 (attached the PharoDebug.log), but not in 12292. Does anyone know what changed in between? Cheers, Doru On 19 Jan 2011, at 21:52, Andreas Wacknitz wrote:
Am 19.01.2011 um 21:01 schrieb Tudor Girba:
Strange. I just did the followings and it worked just fine:
1. downloaded 12303: https://pharo-ic.lille.inria.fr/hudson/view/Pharo/job/Pharo%201.2/67/artifac...
2. filed in the attached CS
3. executed
| m leftMorph scroll | m := PanelMorph new. m hResizing: #shrinkWrap; vResizing: #spaceFill; changeTableLayout; listDirection: #leftToRight. m addMorphBack: (leftMorph := Morph new color: Color red; minimumExtent: 150@10; extent: 150@10; hResizing: #rigid; "shown for clarity, is the default" vResizing: #spaceFill). m addMorphBack: (EdgeGripMorph new width: ProportionalSplitterMorph splitterWidth; hResizing: #rigid; "not the default this time, vResizing is also #spaceFill by default" target: leftMorph). m addMorphBack: (Morph new color: Color green; minWidth: 100; hResizing: #shrinkWrap; vResizing: #spaceFill).
scroll := GeneralScrollPane new changeScrollerTableLayout; scrollTarget: m. scroll openInWindow.
Cheers, Doru
<GeneralScrollPaneLayout.2.cs>
Hi Doru,
I repeated your steps from above. When I execute the code in a Workspace a little dialog will open. It has a horizontal scroll bar that I can use. As soon as I move the splitter I will get the aforementioned DNU. I am on Mac OS 10.6.6.
Regards, Andreas
On 19 Jan 2011, at 20:10, Andreas Wacknitz wrote:
Am 19.01.11 09:54, schrieb Tudor Girba:
That is strange. Are you using Pharo 1.2? Yes (pharo-dev at 12303).
Andreas
Cheers, Doru
On 18 Jan 2011, at 21:33, Andreas Wacknitz wrote:
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"To lead is not to demand things, it is to make them happen."
-- www.tudorgirba.com
"In a world where everything is moving ever faster, one might have better chances to win by moving slower."
-- www.tudorgirba.com "Obvious things are difficult to teach."
Missed the case where fast dragging setting is enabled.... Regards, Gary ----- Original Message ----- From: "Andreas Wacknitz" <a.wacknitz@gmx.de> To: <Pharo-project@lists.gforge.inria.fr> Sent: Tuesday, January 18, 2011 8:33 PM Subject: Re: [Pharo-project] splitters in table layout Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter... Regards, Andreas
What does this imply? Cheers, Doru On 20 Jan 2011, at 12:09, Gary Chambers wrote:
Missed the case where fast dragging setting is enabled....
Regards, Gary
----- Original Message ----- From: "Andreas Wacknitz" <a.wacknitz@gmx.de> To: <Pharo-project@lists.gforge.inria.fr> Sent: Tuesday, January 18, 2011 8:33 PM Subject: Re: [Pharo-project] splitters in table layout
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com "Reasonable is what we are accustomed with."
The attached changeset will "fix" this, though perhaps not ideal... Perhaps it is time to refactor all the Resizer stuff! Regards, Gary ----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Thursday, January 20, 2011 11:17 AM Subject: Re: [Pharo-project] splitters in table layout What does this imply? Cheers, Doru On 20 Jan 2011, at 12:09, Gary Chambers wrote:
Missed the case where fast dragging setting is enabled....
Regards, Gary
----- Original Message ----- From: "Andreas Wacknitz" <a.wacknitz@gmx.de> To: <Pharo-project@lists.gforge.inria.fr> Sent: Tuesday, January 18, 2011 8:33 PM Subject: Re: [Pharo-project] splitters in table layout
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com "Reasonable is what we are accustomed with."
On Jan 20, 2011, at 12:43 PM, Gary Chambers wrote:
The attached changeset will "fix" this, though perhaps not ideal...
Perhaps it is time to refactor all the Resizer stuff!
yes please for 1.3. Stef
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Thursday, January 20, 2011 11:17 AM Subject: Re: [Pharo-project] splitters in table layout
What does this imply?
Cheers, Doru
On 20 Jan 2011, at 12:09, Gary Chambers wrote:
Missed the case where fast dragging setting is enabled....
Regards, Gary
----- Original Message ----- From: "Andreas Wacknitz" <a.wacknitz@gmx.de> To: <Pharo-project@lists.gforge.inria.fr> Sent: Tuesday, January 18, 2011 8:33 PM Subject: Re: [Pharo-project] splitters in table layout
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"Reasonable is what we are accustomed with."
<EdgeGripFastReframeFix.1.cs>
Hi Gary, Indeed, this stops the debugger popping out. However, resizing is not live (only when I mouseUp: does the scroll pane refresh). Is there a quick way to solve this issue, or should we just go with this fix for the moment? Cheers, Doru On 20 Jan 2011, at 12:43, Gary Chambers wrote:
The attached changeset will "fix" this, though perhaps not ideal...
Perhaps it is time to refactor all the Resizer stuff!
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Thursday, January 20, 2011 11:17 AM Subject: Re: [Pharo-project] splitters in table layout
What does this imply?
Cheers, Doru
On 20 Jan 2011, at 12:09, Gary Chambers wrote:
Missed the case where fast dragging setting is enabled....
Regards, Gary
----- Original Message ----- From: "Andreas Wacknitz" <a.wacknitz@gmx.de> To: <Pharo-project@lists.gforge.inria.fr> Sent: Tuesday, January 18, 2011 8:33 PM Subject: Re: [Pharo-project] splitters in table layout
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"Reasonable is what we are accustomed with."
<EdgeGripFastReframeFix.1.cs>
-- www.tudorgirba.com "Problem solving should be focused on describing the problem in a way that makes the solution obvious."
Well, that is the main intentional difference between having the fast dragging setting on or off ;-) Regards, Gary ----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Thursday, January 20, 2011 9:05 PM Subject: Re: [Pharo-project] splitters in table layout Hi Gary, Indeed, this stops the debugger popping out. However, resizing is not live (only when I mouseUp: does the scroll pane refresh). Is there a quick way to solve this issue, or should we just go with this fix for the moment? Cheers, Doru On 20 Jan 2011, at 12:43, Gary Chambers wrote:
The attached changeset will "fix" this, though perhaps not ideal...
Perhaps it is time to refactor all the Resizer stuff!
Regards, Gary
----- Original Message ----- From: "Tudor Girba" <tudor.girba@gmail.com> To: <Pharo-project@lists.gforge.inria.fr> Sent: Thursday, January 20, 2011 11:17 AM Subject: Re: [Pharo-project] splitters in table layout
What does this imply?
Cheers, Doru
On 20 Jan 2011, at 12:09, Gary Chambers wrote:
Missed the case where fast dragging setting is enabled....
Regards, Gary
----- Original Message ----- From: "Andreas Wacknitz" <a.wacknitz@gmx.de> To: <Pharo-project@lists.gforge.inria.fr> Sent: Tuesday, January 18, 2011 8:33 PM Subject: Re: [Pharo-project] splitters in table layout
Am 18.01.2011 um 20:58 schrieb Tudor Girba:
Yes, you missed a changeset Gary sent in the aligning morphs thread (he actually sent two, and you should pick the second one).
Cheers, Doru
Ah, thank you. I have found two messages with changesets from January 11th, 2011. After I filein the second changeset alas I will get a DNU Morph>>doFastWindowReframe: when I move the splitter...
Regards, Andreas
-- www.tudorgirba.com
"Reasonable is what we are accustomed with."
<EdgeGripFastReframeFix.1.cs>
-- www.tudorgirba.com "Problem solving should be focused on describing the problem in a way that makes the solution obvious."
participants (5)
-
Andreas Wacknitz -
Andreas Wacknitz
-
Gary Chambers -
Stéphane Ducasse -
Tudor Girba