[Pharo-project] [Gofer] loading only from package cache but with the same expression
Hi lukas is it possible that for an expression that would work if we get network Gofer looks only in the package cache. so that when you do not have internet but are sure that the files you need are in the package cache you can use gofer to load them I thought is was working but this is not that clear. I could not make it work in the library. Stef
The default Gofer only uses the package cache: Gofer new repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache)) If you specify other repositories they are tried in that order as well: Gofer new renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb)) If you disable the package cache, the package cache is ignored: Gofer new disablePackageCache; renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb)) If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though): Gofer new disableRepositoryErrors; renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb)) Lukas On 19 May 2010 16:59, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Hi lukas
is it possible that for an expression that would work if we get network Gofer looks only in the package cache. so that when you do not have internet but are sure that the files you need are in the package cache you can use gofer to load them
I thought is was working but this is not that clear. I could not make it work in the library.
Stef _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
Yes I know all that now should I disable errors to get it loading only from the local cache?
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though): but does it still load from the local-cache?
Stef On May 19, 2010, at 6:14 PM, Lukas Renggli wrote:
The default Gofer only uses the package cache:
Gofer new repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache))
If you specify other repositories they are tried in that order as well:
Gofer new renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable the package cache, the package cache is ignored:
Gofer new disablePackageCache; renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though):
Gofer new disableRepositoryErrors; renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
Lukas
On 19 May 2010 16:59, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Hi lukas
is it possible that for an expression that would work if we get network Gofer looks only in the package cache. so that when you do not have internet but are sure that the files you need are in the package cache you can use gofer to load them
I thought is was working but this is not that clear. I could not make it work in the library.
Stef _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
The default are, as the documentation says: - report errors - use package cache Everything else you need to configure separately. Lukas On 19 May 2010 18:23, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Yes I know all that now should I disable errors to get it loading only from the local cache?
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though): but does it still load from the local-cache?
Stef
On May 19, 2010, at 6:14 PM, Lukas Renggli wrote:
The default Gofer only uses the package cache:
 Gofer new repositories   --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache))
If you specify other repositories they are tried in that order as well:
 Gofer new renggli: 'ob'; squeaksource: 'rb'; repositories  -->  an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable the package cache, the package cache is ignored:
 Gofer new disablePackageCache; renggli: 'ob'; squeaksource: 'rb'; repositories  --> an Array(a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though):
 Gofer new disableRepositoryErrors; renggli: 'ob'; squeaksource: 'rb'; repositories  -->  an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
Lukas
On 19 May 2010 16:59, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Hi lukas
is it possible that for an expression that would work if we get network Gofer looks only in the package cache. so that when you do not have internet but are sure that the files you need are in the package cache you can use gofer to load them
I thought is was working but this is not that clear. I could not make it work in the library.
Stef _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
Yes, these two things are independent of each other. Lukas On 19 May 2010 23:13, Lukas Renggli <renggli@gmail.com> wrote:
The default are, as the documentation says:
- report errors - use package cache
Everything else you need to configure separately.
Lukas
On 19 May 2010 18:23, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Yes I know all that now should I disable errors to get it loading only from the local cache?
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though): but does it still load from the local-cache?
Stef
On May 19, 2010, at 6:14 PM, Lukas Renggli wrote:
The default Gofer only uses the package cache:
 Gofer new repositories   --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache))
If you specify other repositories they are tried in that order as well:
 Gofer new renggli: 'ob'; squeaksource: 'rb'; repositories  -->  an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable the package cache, the package cache is ignored:
 Gofer new disablePackageCache; renggli: 'ob'; squeaksource: 'rb'; repositories  --> an Array(a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though):
 Gofer new disableRepositoryErrors; renggli: 'ob'; squeaksource: 'rb'; repositories  -->  an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
Lukas
On 19 May 2010 16:59, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Hi lukas
is it possible that for an expression that would work if we get network Gofer looks only in the package cache. so that when you do not have internet but are sure that the files you need are in the package cache you can use gofer to load them
I thought is was working but this is not that clear. I could not make it work in the library.
Stef _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
-- Lukas Renggli www.lukas-renggli.ch
ok I missed that! Stef On May 19, 2010, at 11:13 PM, Lukas Renggli wrote:
Yes, these two things are independent of each other.
Lukas
On 19 May 2010 23:13, Lukas Renggli <renggli@gmail.com> wrote:
The default are, as the documentation says:
- report errors - use package cache
Everything else you need to configure separately.
Lukas
On 19 May 2010 18:23, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Yes I know all that now should I disable errors to get it loading only from the local cache?
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though): but does it still load from the local-cache?
Stef
On May 19, 2010, at 6:14 PM, Lukas Renggli wrote:
The default Gofer only uses the package cache:
Gofer new repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache))
If you specify other repositories they are tried in that order as well:
Gofer new renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable the package cache, the package cache is ignored:
Gofer new disablePackageCache; renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
If you disable repository errors inaccessible repositories are ignored and don't throw an error (you have to tell that though):
Gofer new disableRepositoryErrors; renggli: 'ob'; squeaksource: 'rb'; repositories --> an Array(a MCCacheRepository(/Users/renggli/University/pharo/PetitParser/package-cache) a MCHttpRepository(http://source.lukas-renggli.ch/ob) a MCHttpRepository(http://www.squeaksource.com/rb))
Lukas
On 19 May 2010 16:59, Stéphane Ducasse <stephane.ducasse@inria.fr> wrote:
Hi lukas
is it possible that for an expression that would work if we get network Gofer looks only in the package cache. so that when you do not have internet but are sure that the files you need are in the package cache you can use gofer to load them
I thought is was working but this is not that clear. I could not make it work in the library.
Stef _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
-- Lukas Renggli www.lukas-renggli.ch
-- Lukas Renggli www.lukas-renggli.ch
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
participants (2)
-
Lukas Renggli -
Stéphane Ducasse