Re: [Pharo-project] Resize pharo window
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS. Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
We can't... I wrote a script (Lukas rewrote it in C) which is active on his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c Cheers, Max On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
On Tue, 19 Oct 2010, Max Leske wrote:
We can't... I wrote a script (Lukas rewrote it in C) which is active on his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c
We were using the following bash script for this: $ cat resize-squeak.sh #!/bin/bash if [ $# -ne 3 ] then echo "Usage: `basename $0` <image> <width> <height>" exit 1 fi echo -ne \\x$(printf "%02X" $[$3%256])\\x$(printf "%02X" $[$3/256])\\x$(printf "%02X" $[$2%256])\\x$(printf "%02X" $[$2/256]) | dd of="$1" obs=1 seek=24 conv=block,notrunc cbs=4 But we patched our VMs, so nowadays we do it from the image. :) Levente
Cheers, Max
On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
The script used to be bash but some people had problems with it on other systems so Lukas rewrote it. That patch might be nice to have in an official VM... Max On 19.10.2010, at 22:07, Levente Uzonyi wrote:
On Tue, 19 Oct 2010, Max Leske wrote:
We can't... I wrote a script (Lukas rewrote it in C) which is active on his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c
We were using the following bash script for this:
$ cat resize-squeak.sh #!/bin/bash
if [ $# -ne 3 ] then echo "Usage: `basename $0` <image> <width> <height>" exit 1 fi echo -ne \\x$(printf "%02X" $[$3%256])\\x$(printf "%02X" $[$3/256])\\x$(printf "%02X" $[$2%256])\\x$(printf "%02X" $[$2/256]) | dd of="$1" obs=1 seek=24 conv=block,notrunc cbs=4
But we patched our VMs, so nowadays we do it from the image. :)
Levente
Cheers, Max
On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
On Tue, 19 Oct 2010, Max Leske wrote:
The script used to be bash but some people had problems with it on other systems so Lukas rewrote it.
That patch might be nice to have in an official VM...
It may be in the next release. See the following thread: http://lists.squeakfoundation.org/pipermail/vm-dev/2010-August/005253.html Levente
Max
On 19.10.2010, at 22:07, Levente Uzonyi wrote:
On Tue, 19 Oct 2010, Max Leske wrote:
We can't... I wrote a script (Lukas rewrote it in C) which is active on his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c
We were using the following bash script for this:
$ cat resize-squeak.sh #!/bin/bash
if [ $# -ne 3 ] then echo "Usage: `basename $0` <image> <width> <height>" exit 1 fi echo -ne \\x$(printf "%02X" $[$3%256])\\x$(printf "%02X" $[$3/256])\\x$(printf "%02X" $[$2%256])\\x$(printf "%02X" $[$2/256]) | dd of="$1" obs=1 seek=24 conv=block,notrunc cbs=4
But we patched our VMs, so nowadays we do it from the image. :)
Levente
Cheers, Max
On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
So you gonna remove the call to ioSetDisplayMode of the specific vm display plugin from primitiveSetDisplayMode? Alex 2010/10/19 Levente Uzonyi <leves@elte.hu>:
On Tue, 19 Oct 2010, Max Leske wrote:
The script used to be bash but some people had problems with it on other systems so Lukas rewrote it.
That patch might be nice to have in an official VM...
It may be in the next release. See the following thread: http://lists.squeakfoundation.org/pipermail/vm-dev/2010-August/005253.html
Levente
Max
On 19.10.2010, at 22:07, Levente Uzonyi wrote:
On Tue, 19 Oct 2010, Max Leske wrote:
We can't... I wrote a script (Lukas rewrote it in C) which is active on his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c
We were using the following bash script for this:
$ cat resize-squeak.sh #!/bin/bash
if [ $# -ne 3 ] then    echo "Usage: `basename $0` <image> <width> <height>"    exit 1 fi echo -ne \\x$(printf "%02X" $[$3%256])\\x$(printf "%02X" $[$3/256])\\x$(printf "%02X" $[$2%256])\\x$(printf "%02X" $[$2/256]) | dd of="$1" obs=1 seek=24 conv=block,notrunc cbs=4
But we patched our VMs, so nowadays we do it from the image. :)
Levente
Cheers, Max
On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
On Wed, 20 Oct 2010, Alexander LazareviÄ wrote:
So you gonna remove the call to ioSetDisplayMode of the specific vm display plugin from primitiveSetDisplayMode?
Alex No, the idea is to replace the current implementation of ioSetDisplayMode: return 0; to another which saves the display size: setSavedWindowSize((w << 16) + (h & 0xFFFF)); return 1; Levente 2010/10/19 Levente Uzonyi <leves@elte.hu>:
On Tue, 19 Oct 2010, Max Leske wrote:
The script used to be bash but some people had problems with it on other systems so Lukas rewrote it.
That patch might be nice to have in an official VM...
It may be in the next release. See the following thread: http://lists.squeakfoundation.org/pipermail/vm-dev/2010-August/005253.html
Levente
Max
On 19.10.2010, at 22:07, Levente Uzonyi wrote:
On Tue, 19 Oct 2010, Max Leske wrote:
We can't... I wrote a script (Lukas rewrote it in C) which is active on his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c
We were using the following bash script for this:
$ cat resize-squeak.sh #!/bin/bash
if [ $# -ne 3 ] then    echo "Usage: `basename $0` <image> <width> <height>"    exit 1 fi echo -ne \\x$(printf "%02X" $[$3%256])\\x$(printf "%02X" $[$3/256])\\x$(printf "%02X" $[$2%256])\\x$(printf "%02X" $[$2/256]) | dd of="$1" obs=1 seek=24 conv=block,notrunc cbs=4
But we patched our VMs, so nowadays we do it from the image. :)
Levente
Cheers, Max
On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
Hi Levente, 2010/10/20 Levente Uzonyi <leves@elte.hu>
On Wed, 20 Oct 2010, Alexander LazareviÄ wrote:
So you gonna remove the call to ioSetDisplayMode of the specific vm
display plugin from primitiveSetDisplayMode?
Alex
No, the idea is to replace the current implementation of ioSetDisplayMode:
return 0;
to another which saves the display size:
setSavedWindowSize((w << 16) + (h & 0xFFFF)); return 1;
This may or may not be related. We do headless builds at Teleplace and everything worked fine until we moved to Mac. There-on the issue for us was that ioScreenSize was defined to answer 16@16 for the screen size when run headless, and so images built headless on the Mac used to come up with a tiny screen. The fix was to use the saved window size. See http://www.squeakvm.org/svn/squeak/branches/Cog/platforms/Mac%20OS/vm/sqMacW... . As far as setting the image size in image we discussed all this on this list back on May 16th, right? e.g. save the image (but don't quit) open the just-saved image and modify the screen size there-in. Is this what you're doing? best Eliot
Levente
2010/10/19 Levente Uzonyi <leves@elte.hu>:
On Tue, 19 Oct 2010, Max Leske wrote:
The script used to be bash but some people had problems with it on other
systems so Lukas rewrote it.
That patch might be nice to have in an official VM...
It may be in the next release. See the following thread: http://lists.squeakfoundation.org/pipermail/vm-dev/2010-August/005253.html
Levente
Max
On 19.10.2010, at 22:07, Levente Uzonyi wrote:
On Tue, 19 Oct 2010, Max Leske wrote:
We can't... I wrote a script (Lukas rewrote it in C) which is active on
his build server and replaces the relevant bits in the image after the build process. Check it out at github: http://github.com/renggli/builder/blob/master/tools/build-resize.c
We were using the following bash script for this:
$ cat resize-squeak.sh #!/bin/bash
if [ $# -ne 3 ] then echo "Usage: `basename $0` <image> <width> <height>" exit 1 fi echo -ne \\x$(printf "%02X" $[$3%256])\\x$(printf "%02X" $[$3/256])\\x$(printf "%02X" $[$2%256])\\x$(printf "%02X" $[$2/256]) | dd of="$1" obs=1 seek=24 conv=block,notrunc cbs=4
But we patched our VMs, so nowadays we do it from the image. :)
Levente
Cheers, Max
On 19.10.2010, at 20:35, Stéphane Ducasse wrote:
I'm not sure that we can do that from the system and if this is not
something that can only set up by the OS.
Stef
Hello,
I try to understand how I can change the size of the Pharo window.
I tried this: Display setExtent: 1000@700 depth: 32; beDisplay.
That seems to work ... but only a few milliseconds. After this delay, the window returns back to its previous size.
Any suggestions? :)
Adrien. _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
On 19/10/10 4:13 PM, Max Leske wrote:
The script used to be bash but some people had problems with it on other systems so Lukas rewrote it.
Here's one more way using "vi" (which apparently has a binary mode). Save the attached vi commands in a file, and run it using: vi -b your.image < poke-image.vi It sets the image size to 512x768. If you want another size, you'll have to do the conversion to hex. This method can be useful if the "bash" method won't work, and you don't have a C compiler on your machine.
participants (6)
-
Alexander LazareviÄ -
Eliot Miranda -
Levente Uzonyi -
Max Leske -
Stéphane Ducasse -
Yanni Chiu