Also tested on - Squeak 4.2 All in One, Squeak image 10966 190 run, 189 passes, 0 expected failures, 1 failures, 0 errors, 0 unexpected passes On UnixProcessUnixFileLockingTestCase>>#testCooperatingProcess04 Cheer El sáb, 19-02-2011 a las 08:50 -0500, David T. Lewis escribió:

Thank you Miguel!

Dave

On Sat, Feb 19, 2011 at 03:00:23AM -0600, Miguel Cob? wrote:

...

Hi all,

I have updated the Metacello configuration for OSProcess.

Changes -------

- Uses symbolic versions - Adds support for release 4.4.0 of OSProcess - Applies MetacelloToolBox validations to the old versions of the configuration and corrects them

Install --------

In a PharoCore image evaluate in a workspace:

Gofer it squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfOSProcess'; load. ((Smalltalk globals at: #ConfigurationOfOSProcess) project version: #stable) load.

This will install the stable version for the platform you are installing to. This is using symbolic versions and permits to rely on the maintainers to specify the stable version (4.3.11, 4.3.12, 4.4.0) for a given platform version (PharoCore 1.1.1, PharoCore 1.2).

Other versions and groups ---------------------------

To load older versions:

((Smalltalk globals at: #ConfigurationOfOSProcess) project version: '4.3.11') load.

To load other groups:

((Smalltalk globals at: #ConfigurationOfOSProcess) project version: #stable) load: 'Tests'.

or

((Smalltalk globals at: #ConfigurationOfOSProcess) project version: '4.3.11') load: 'Tests'.

Platforms ----------

This was tested on

- PharoCore 1.1.1 190 run, 190 passes, 0 expected failures, 0 failures, 0 errors, 0 unexpected passes

- PharoCore 1.2 (build #199 from Hudson) 190 run, 190 passes, 0 expected failures, 0 failures, 0 errors, 0 unexpected passes

P.S. I'm cross-posting to pharo and metacello lists but I don't know what is the correct way to announce a new configuration. Advise?

Enjoy! -- Miguel Cob?? http://twitter.com/MiguelCobaMtz http://miguel.leugim.com.mx

-- Miguel Cobá http://twitter.com/MiguelCobaMtz http://miguel.leugim.com.mx

Ok, thanks for the info! Cheers El dom, 20-02-2011 a las 15:30 -0500, David T. Lewis escribió:

On Sat, Feb 19, 2011 at 09:32:52AM -0600, Miguel Cob? wrote:

...

Also tested on

- Squeak 4.2 All in One, Squeak image 10966 190 run, 189 passes, 0 expected failures, 1 failures, 0 errors, 0 unexpected passes

On UnixProcessUnixFileLockingTestCase>>#testCooperatingProcess04

Cheer

The #testCooperatingProcesses04 is a bit flakey as it depends to some extent on the timing of two cooperating VM processes. So this is nothing to worry about (except perhaps for my poor test) and you will probably see intermittent failures on any image.

Thanks again for the updates!

Dave

...

El s??b, 19-02-2011 a las 08:50 -0500, David T. Lewis escribi??:

...

Thank you Miguel!

Dave

On Sat, Feb 19, 2011 at 03:00:23AM -0600, Miguel Cob? wrote:

...

Hi all,

I have updated the Metacello configuration for OSProcess.

Changes -------

- Uses symbolic versions - Adds support for release 4.4.0 of OSProcess - Applies MetacelloToolBox validations to the old versions of the configuration and corrects them

Install --------

In a PharoCore image evaluate in a workspace:

Gofer it squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfOSProcess'; load. ((Smalltalk globals at: #ConfigurationOfOSProcess) project version: #stable) load.

This will install the stable version for the platform you are installing to. This is using symbolic versions and permits to rely on the maintainers to specify the stable version (4.3.11, 4.3.12, 4.4.0) for a given platform version (PharoCore 1.1.1, PharoCore 1.2).

Other versions and groups ---------------------------

To load older versions:

((Smalltalk globals at: #ConfigurationOfOSProcess) project version: '4.3.11') load.

To load other groups:

((Smalltalk globals at: #ConfigurationOfOSProcess) project version: #stable) load: 'Tests'.

or

((Smalltalk globals at: #ConfigurationOfOSProcess) project version: '4.3.11') load: 'Tests'.

Platforms ----------

This was tested on

- PharoCore 1.1.1 190 run, 190 passes, 0 expected failures, 0 failures, 0 errors, 0 unexpected passes

- PharoCore 1.2 (build #199 from Hudson) 190 run, 190 passes, 0 expected failures, 0 failures, 0 errors, 0 unexpected passes

P.S. I'm cross-posting to pharo and metacello lists but I don't know what is the correct way to announce a new configuration. Advise?

Enjoy! -- Miguel Cob?? http://twitter.com/MiguelCobaMtz http://miguel.leugim.com.mx

-- Miguel Cob?? http://twitter.com/MiguelCobaMtz http://miguel.leugim.com.mx

-- Miguel Cobá http://twitter.com/MiguelCobaMtz http://miguel.leugim.com.mx