[Pharo-project] could not find module vm-display-X11
Reading here: http://www.pharo-project.org/pharo-download It says this file "contains all necessary files", so I downloaded it: http://gforge.inria.fr/frs/download.php/26828/Pharo-1.0-OneClick.zip It says "run the executable". I don't know what executable it's referring to, so I'm trying Pharo.sh When I do, I get: could not find module vm-display-X11 I've done general searches as well as searches through the Pharo forum and mailing lists. I haven't seen anyone else with this problem, so I'm still not sure what to do and I need help. I'm running Linux i686.. it's only a release candidate distro (Unity Linux), so I wouldn't be surprised to learn that there are distro/library issues. I can give additional system information if you need. The website doesn't mention any dependencies, but could I be missing some? --- Reading here: http://www.pharo-project.org/pharo-download I see a section for "Custom downloads". The instructions say: To run Pharo you need an image, changes, and a sources file, as well as a VM for your platform. When downloads are completed, uncompress all files and put them into the same directory (this directory should then contain a .image, .changes, and a .sources file). Then start the VM. I downloaded these files: Image and Changes: http://gforge.inria.fr/frs/download.php/26790/Pharo-1.0.zip Sources: https://gforge.inria.fr/frs/download.php/24391/PharoV10.sources.zip Virtual Machine: http://gforge.inria.fr/frs/download.php/24736/pharo-vm-0.15.2f-linux.zip I unzipped them all into the same directory. Pharo-1.0.zip already had a PharoV10.sources within it, so I used the one from PharoV10.sources.zip I see these files in the same directory: Pharo-1.0.image Pharo-1.0.changes PharoV10.sources I don't know what to do now, there are no instructions for running Pharo after those steps. --- I've done a lot of playing outside of the above steps, but I'm completely ignorant of how Pharo is installed (or compiled?) and run. So far it's nothing like the other software I've used. Any advice is appreciated. I'm also willing to try a LiveCD of any Linux/BSD distro if that'll help me get Pharo working more easily. My goal here is just to check Pharo out, so I could deal with using another distro temporarily. -- http://spiralofhope.com
Have you unzipped the entire directory structure, including Contents/Linux686, etc.? ________________________________________ From: pharo-project-bounces@lists.gforge.inria.fr [pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of spiralofhope [spiralofhope@lavabit.com] Sent: Thursday, June 10, 2010 3:56 AM To: pharo-project@lists.gforge.inria.fr Subject: [Pharo-project] could not find module vm-display-X11 Reading here: http://www.pharo-project.org/pharo-download It says this file "contains all necessary files", so I downloaded it: http://gforge.inria.fr/frs/download.php/26828/Pharo-1.0-OneClick.zip It says "run the executable". I don't know what executable it's referring to, so I'm trying Pharo.sh When I do, I get: could not find module vm-display-X11 I've done general searches as well as searches through the Pharo forum and mailing lists. I haven't seen anyone else with this problem, so I'm still not sure what to do and I need help. I'm running Linux i686.. it's only a release candidate distro (Unity Linux), so I wouldn't be surprised to learn that there are distro/library issues. I can give additional system information if you need. The website doesn't mention any dependencies, but could I be missing some? --- Reading here: http://www.pharo-project.org/pharo-download I see a section for "Custom downloads". The instructions say: To run Pharo you need an image, changes, and a sources file, as well as a VM for your platform. When downloads are completed, uncompress all files and put them into the same directory (this directory should then contain a .image, .changes, and a .sources file). Then start the VM. I downloaded these files: Image and Changes: http://gforge.inria.fr/frs/download.php/26790/Pharo-1.0.zip Sources: https://gforge.inria.fr/frs/download.php/24391/PharoV10.sources.zip Virtual Machine: http://gforge.inria.fr/frs/download.php/24736/pharo-vm-0.15.2f-linux.zip I unzipped them all into the same directory. Pharo-1.0.zip already had a PharoV10.sources within it, so I used the one from PharoV10.sources.zip I see these files in the same directory: Pharo-1.0.image Pharo-1.0.changes PharoV10.sources I don't know what to do now, there are no instructions for running Pharo after those steps. --- I've done a lot of playing outside of the above steps, but I'm completely ignorant of how Pharo is installed (or compiled?) and run. So far it's nothing like the other software I've used. Any advice is appreciated. I'm also willing to try a LiveCD of any Linux/BSD distro if that'll help me get Pharo working more easily. My goal here is just to check Pharo out, so I could deal with using another distro temporarily. -- http://spiralofhope.com _______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
On Thu, 10 Jun 2010 06:24:38 -0400 "Schwab,Wilhelm K" <bschwab@anest.ufl.edu> wrote:
Have you unzipped the entire directory structure, including Contents/Linux686, etc.?
Yes, and the structure was kept intact. On Fri, 11 Jun 2010 00:39:34 +0200 Mariano Martinez Peck <marianopeck@gmail.com> wrote:
I cc'ed vm mailing list that maybe they can help you.
Thanks, I'll subscribe to that mailing list and report back here if I work out a solution there. I wasn't sure how all of Pharo's parts were maintained. Now that I know the vm has its own team through squeak I'll look into getting Squeak running. Maybe doing that will help me learn enough to get the vm running with Pharo too.. -- http://spiralofhope.com
I cc'ed vm mailing list that maybe they can help you. Cheers mariano On Thu, Jun 10, 2010 at 9:56 AM, spiralofhope <spiralofhope@lavabit.com>wrote:
Reading here: http://www.pharo-project.org/pharo-download It says this file "contains all necessary files", so I downloaded it: http://gforge.inria.fr/frs/download.php/26828/Pharo-1.0-OneClick.zip It says "run the executable". I don't know what executable it's referring to, so I'm trying Pharo.sh
When I do, I get: could not find module vm-display-X11
I've done general searches as well as searches through the Pharo forum and mailing lists. I haven't seen anyone else with this problem, so I'm still not sure what to do and I need help.
I'm running Linux i686.. it's only a release candidate distro (Unity Linux), so I wouldn't be surprised to learn that there are distro/library issues.
I can give additional system information if you need. The website doesn't mention any dependencies, but could I be missing some?
---
Reading here: http://www.pharo-project.org/pharo-download I see a section for "Custom downloads".
The instructions say: To run Pharo you need an image, changes, and a sources file, as well as a VM for your platform. When downloads are completed, uncompress all files and put them into the same directory (this directory should then contain a .image, .changes, and a .sources file). Then start the VM.
I downloaded these files: Image and Changes: http://gforge.inria.fr/frs/download.php/26790/Pharo-1.0.zip Sources: https://gforge.inria.fr/frs/download.php/24391/PharoV10.sources.zip Virtual Machine: http://gforge.inria.fr/frs/download.php/24736/pharo-vm-0.15.2f-linux.zip
I unzipped them all into the same directory.
Pharo-1.0.zip already had a PharoV10.sources within it, so I used the one from PharoV10.sources.zip
I see these files in the same directory: Pharo-1.0.image Pharo-1.0.changes PharoV10.sources
I don't know what to do now, there are no instructions for running Pharo after those steps.
---
I've done a lot of playing outside of the above steps, but I'm completely ignorant of how Pharo is installed (or compiled?) and run. So far it's nothing like the other software I've used.
Any advice is appreciated. I'm also willing to try a LiveCD of any Linux/BSD distro if that'll help me get Pharo working more easily. My goal here is just to check Pharo out, so I could deal with using another distro temporarily.
_______________________________________________ Pharo-project mailing list Pharo-project@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
I was previously using release candidate 1 of my distro, fully updated. I reinstalled my system, using the new candidate 2. I then followed the steps to reproduce the issue. . and I cannot. I see a gui open up, and I'm able to step through the integrated tutorial. Whatever issue I was having has been solved by this reinstall. Perhaps my earlier tinkering broke some of the innards of my earlier distro install or there was some issue that's since been resolved. -- http://spiralofhope.com
participants (3)
-
Mariano Martinez Peck -
Schwab,Wilhelm K -
spiralofhope