>
> Thank you,
> Facu
>
> On Mon, Apr 12, 2010 at 5:28 PM, St�phane Ducasse <
stephane.ducasse@inria.fr> wrote:
>
> On Apr 12, 2010, at 10:18 PM, Facundo Vozzi wrote:
>
> > Stef,
> > I'm using Pharo 1.0 RC2 with Seaside 2.8.4 and all is fine but it took over 15 seconds open a smalltalk debugger from a Seaside wallback. It was the reason of my first mail.
> > I tried with Squeak 4.1 RC4, to discard a network configuration problem at operative system level, and i don't have the problem. It takes 1 second to open the debugger.
> > Then, Marcus ask to me if i had the same problem with "PharoCore-1.1-11301-UNSTABLE", at that time I download it, installed Seaside and try again. To Install Seaside took to me over 20 minutes but I had been instaled it on Pharo 1.0 and was been fine.
>
> ok so with 1.1 this is working?
> There were a **lot** of changes in 1.1. We will release shortly after 1.0 and much much faster :)
>
> > Is it more clear now ?. Please, sorry for my poor English.
>
> Don;t worry. write simple sentences and we will understand you.
> >
> > Facu
> >
> >
> > On Mon, Apr 12, 2010 at 5:03 PM, St�phane Ducasse <
stephane.ducasse@inria.fr> wrote:
> > This is really strange. Can you describe your setup? Do you have an antivirus? And with Squeak you do not have that behavior?
> > We are loading larger code than seaside in Pharo and we do not have this problem.
> > So I would really like to understand. Could you post your image somewhere?
> >
> > Stef
> >
> > On Apr 12, 2010, at 9:27 PM, Facundo Vozzi wrote:
> >
> > > Stef,
> > > It took to me over 20 minutes to complete the Seaside 2.8 installation and when I interrupted it the debugger opened when the system was writting the pharoXXX.changes always but I couldn't check what is happening.
> > >
> > > I will check it again.
> > >
> > > Facu
> > >
> > > ps: I refered to pharoXXX.changes as "log" because of Visual Smalltalk where the "changes" are called changes.log, excuse me.
> > >
> > > On Mon, Apr 12, 2010 at 3:05 PM, St�phane Ducasse <
stephane.ducasse@inria.fr> wrote:
> > >
> > > On Apr 12, 2010, at 7:45 PM, Facundo Vozzi wrote:
> > >
> > > > Marcus,
> > > > I can't install Seaside on Pharo 1.1(*) but then i'll try again at home.
> > > >
> > > > It isn't my point to compare Pharo to Squeak performance but I used Squeak to test this particular situation.
> > > >
> > > > Thank you,
> > > >
> > > > Facu
> > > >
> > > > (*) it's very slow to write the log taking minutes to complete the instalation
> > >
> > > which log?
> > >
> > > Stef
> > >
> > > >
> > > > On Mon, Apr 12, 2010 at 12:54 PM, Marcus Denker <
marcus.denker@inria.fr> wrote:
> > > >
> > > > On Apr 12, 2010, at 5:41 PM, Marcus Denker wrote:
> > > >
> > > > >
> > > > > On Apr 12, 2010, at 5:37 PM, Facundo Vozzi wrote:
> > > > >
> > > > >> Lukas,
> > > > >> It happens on my machine with Windows/(Firefox-Chrome-IE 8) and Pharo.
> > > > >>
> > > > >> But I test it on the same machine with Squeak 4.1 RC4 and it go very very fast
> > > > >> to open de smalltalk debugger.
> > > > >> Furthermore, Squeak 4.1 RC4 seem to be faster than Pharo, did you note that too or it's only my sensations?
> > > > >>
> > > > >
> > > > > Did you check with Pharo 1.1?
> > > > >
> > > > > � � �
https://gforge.inria.fr/frs/download.php/26762/PharoCore-1.1-11301-UNSTABLE.1.zip
> > > > >
> > > > > In general, Squeak 4.1 should not be compared to Pharo 1.0 speed-wise, but Pharo 1.1
> > > > >
> > > >
> > > > My theory for your bug is that it's this:
> > > >
> > > > � � � �
http://code.google.com/p/pharo/issues/detail?id=860
> > > >
> > > > We added it to 1.1 on Nov. 01, 2009. Not to 1.0, because 1.0 was supposed to be released
> > > > "very soon".
> > > >
> > > > � � � �Marcus
> > > >
> > > >
> > > >
> > > > --
> > > > Marcus Denker �--
http://www.marcusdenker.de
> > > > INRIA Lille -- Nord Europe. Team RMoD.
> > > >
> > > >
> > > > _______________________________________________
> > > > Pharo-project mailing list
> > > >
Pharo-project@lists.gforge.inria.fr
> > > >
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
> > > >
> > > >
> > > >
> > > > --
> > > > Facundo Vozzi
> > > > InfOil S.A.
> > > > Project Leader
> > > > (+54-11) 4542-9999 x108
> > > >
fvozzi@infoil.com.ar
> > > > _______________________________________________
> > > > Pharo-project mailing list
> > > >
Pharo-project@lists.gforge.inria.fr
> > > >
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
> > >
> > >
> > > _______________________________________________
> > > Pharo-project mailing list
> > >
Pharo-project@lists.gforge.inria.fr
> > >
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
> > >
> > >
> > >
> > > --
> > > Facundo Vozzi
> > > InfOil S.A.
> > > Project Leader
> > > (+54-11) 4542-9999 x108
> > >
fvozzi@infoil.com.ar
> > > _______________________________________________
> > > Pharo-project mailing list
> > >
Pharo-project@lists.gforge.inria.fr
> > >
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
> >
> >
> > _______________________________________________
> > Pharo-project mailing list
> >
Pharo-project@lists.gforge.inria.fr
> >
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
> >
> >
> >
> > --
> > Facundo Vozzi
> > InfOil S.A.
> > Project Leader
> > (+54-11) 4542-9999 x108
> >
fvozzi@infoil.com.ar
> > _______________________________________________
> > Pharo-project mailing list
> >
Pharo-project@lists.gforge.inria.fr
> >
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
>
> _______________________________________________
> Pharo-project mailing list
>
Pharo-project@lists.gforge.inria.fr
>
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
>
>
>
> --
> Facundo Vozzi
> InfOil S.A.
> Project Leader
> (+54-11) 4542-9999 x108
>
fvozzi@infoil.com.ar
> _______________________________________________
> Pharo-project mailing list
>
Pharo-project@lists.gforge.inria.fr
>
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project
_______________________________________________
Pharo-project mailing list
Pharo-project@lists.gforge.inria.fr
http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project