On 29/06/13 17:45, Sven Van Caekenberghe wrote:

Hi Jan,

On 29 Jun 2013, at 17:12, Jan Vrany <jan.vrany@fit.cvut.cz> wrote:

Hi,

for 32bit application you can never allocate whole 4GB as some memory has to be reserved for kernel. The usual split is 2/2, sometimes 3/1. Plus,
the actual code must be somewhere in the memory as well as the stack.
Usually the real limit for 32bit application is somewhere like 1.8GB for
heap. With 3/1 split you can have one more gig, but for linux that would
require a 3/1 support in the kernel. If I'm not mistaken most stock kernels come with 2/2 split.

Jan

Thanks for the reply. Sounds pretty reasonable.

Would this also be the case for a 32-bit app running on a 64-bit OS ?

If I'm not much mistaken, yes. The crucial point are system calls which need to pass data to the kernel (such as read()/write() to name the most
obvious ones). At some point the process is in funny state, memory-wise.
It's in kernel mode already running the system call but CPU has still
user-processes' page table active. At this point data are copied from
user memory to kernel memory (to those reserved 2gigs, usually memory above 0x7FFFFFFF) Then the kernel install its own, kernel page table which maps some memory the very same physical page which was mapped in user process's page table to the address where the data were just copied. That's how the data are transferred between user space and kernel space. Or, at least that's my understanding how it's done :-) I was never particularly good at these low-level things.

Best, Jan

Sven

On 28/06/13 23:02, Sven Van Caekenberghe wrote:

Hi,

I wrote a little test to explore the heap size limits of the current Pharo image+VM combination. I did some tests on a 8GB 64-bit Linux machine and the basic conclusion is that using a standard 1GB heap size you can allocate and GC with close to 1GB of actual data. I think that is pretty good news. The machine has 4 effective cores, so could easily run 4 busy images like that.

Pushing the limits further, things get weird, up to the point of crashing. Sadly 2, 3 or 4 GB heap size, which should be theoretically possible, fail, thus limiting the amount of data that can be allocated and used.

Anyway, my goal is to start the debate around this topic ;-)


Here is the test script:

t3@coolermaster:smalltalk$ cat memtest.st

NonInteractiveTranscript stdout install.

!

Transcript show: 'memtest.st'; cr.
Smalltalk garbageCollect.
Transcript show: SmalltalkImage current vm statisticsReport; cr.

!

| count size data timeToRun |
count := Smalltalk commandLine arguments first asInteger.
size := Smalltalk commandLine arguments second asInteger.
Transcript show: ('allocating: {1} times {2} bytes' format: { count. size }); cr.
timeToRun := [
� �data := Array new: count streamContents: [ :out |
� � �count timesRepeat: [
� � � �out nextPut: (ByteArray new: size) ] ].
] timeToRun.
Transcript
� �show: ('allocated: {1}' format: { (data collect: #size) sum humanReadableSIByteSize });
� �cr.
Transcript show: ('time to run {1}' format: { Duration milliSeconds: timeToRun }); cr.
Transcript show: '3 times GC'; cr.
timeToRun := [
� �3 timesRepeat: [ Smalltalk garbageCollect ] ] timeToRun.
Transcript show: ('time to run {1}' format: { Duration milliSeconds: timeToRun }); cr.
Transcript show: SmalltalkImage current vm statisticsReport; cr.

!

SmalltalkImage current quitPrimitive.


And here is a normal result running get.pharo.org/20+vm

$ ./pharo Pharo.image memtest.st 512 1024000

memtest.st
uptime � � � � � � � � �0h0m0s
memory � � � � � � � � �25,076,708 bytes
� � � � old � � � � � � � � � � 19,213,624 bytes (76.60000000000001%)
� � � � young � � � � � 5,384 bytes (0.0%)
� � � � used � � � � � �19,219,008 bytes (76.60000000000001%)
� � � � free � � � � � �5,857,700 bytes (23.400000000000002%)
GCs � � � � � � � � � � � � � � 10 (12ms between GCs)
� � � � full � � � � � � � � � �1 totalling 30ms (25.0% uptime), avg 30.0ms
� � � � incr � � � � � �9 totalling 6ms (5.0% uptime), avg 0.7000000000000001ms
� � � � tenures � � � � 0

allocating: 512 times 1024000 bytes
allocated: 524.29 MB
time to run 0:00:00:02.852
3 times GC
time to run 0:00:00:00.196
uptime � � � � � � � � �0h0m3s
memory � � � � � � � � �546,746,364 bytes
� � � � old � � � � � � � � � � 543,520,476 bytes (99.4%)
� � � � young � � � � � 7,184 bytes (0.0%)
� � � � used � � � � � �543,527,660 bytes (99.4%)
� � � � free � � � � � �3,218,704 bytes (0.6000000000000001%)
GCs � � � � � � � � � � � � � � 356 (9ms between GCs)
� � � � full � � � � � � � � � �89 totalling 2,743ms (86.4% uptime), avg 30.8ms
� � � � incr � � � � � �267 totalling 223ms (7.0% uptime), avg 0.8ms
� � � � tenures � � � � 0
Since last view 346 (9ms between GCs)
� � � � uptime � � � � �3.1s
� � � � full � � � � � � � � � �88 totalling 2,713ms (88.80000000000001% uptime), avg 30.8ms
� � � � incr � � � � � �258 totalling 217ms (7.1000000000000005% uptime), avg 0.8ms
� � � � tenures � � � � 0


It takes about 2.5s to allocate about 512Mb. A GC then takes 30ms.

You can play a bit with the 2 parameters to generate different datasets.

Not changing any VM parameters, you can successfully do something like

$ ./pharo Pharo.image memtest.st 1000 1024000

or

$ ./pharo Pharo.image memtest.st 1024000 1000

thus allocating about 1GB.

Playing with -mmap gives some weird results and unexpected slowness as well. Consider (the default -mmap is 1024m):

$ ./pharo -mmap 1280m Pharo.image memtest.st 500 1024000

memtest.st
uptime � � � � � � � � �0h0m0s
memory � � � � � � � � �25,076,716 bytes
� � � � old � � � � � � � � � � 19,213,480 bytes (76.60000000000001%)
� � � � young � � � � � 5,384 bytes (0.0%)
� � � � used � � � � � �19,218,864 bytes (76.60000000000001%)
� � � � free � � � � � �5,857,852 bytes (23.400000000000002%)
GCs � � � � � � � � � � � � � � 12 (13ms between GCs)
� � � � full � � � � � � � � � �2 totalling 56ms (37.1% uptime), avg 28.0ms
� � � � incr � � � � � �10 totalling 6ms (4.0% uptime), avg 0.6000000000000001ms
� � � � tenures � � � � 0

allocating: 500 times 1024000 bytes
allocated: 512.00 MB
time to run 0:00:00:13.66
3 times GC
time to run 0:00:00:00.192
uptime � � � � � � � � �0h0m14s
memory � � � � � � � � �533,946,384 bytes
� � � � old � � � � � � � � � � 531,232,232 bytes (99.5%)
� � � � young � � � � � 7,644 bytes (0.0%)
� � � � used � � � � � �531,239,876 bytes (99.5%)
� � � � free � � � � � �2,706,508 bytes (0.5%)
GCs � � � � � � � � � � � � � � 1,011 (14ms between GCs)
� � � � full � � � � � � � � � �501 totalling 13,819ms (98.7% uptime), avg 27.6ms
� � � � incr � � � � � �510 totalling 35ms (0.2% uptime), avg 0.1ms
� � � � tenures � � � � 0
Since last view 999 (14ms between GCs)
� � � � uptime � � � � �13.9s
� � � � full � � � � � � � � � �499 totalling 13,763ms (99.30000000000001% uptime), avg 27.6ms
� � � � incr � � � � � �500 totalling 29ms (0.2% uptime), avg 0.1ms
� � � � tenures � � � � 0


So increasing the heap from 1024 Mb to 1280 Mb slows the allocation down to 14s.

Increasing the heap size to 1792 Mb gives the following result:

t3@coolermaster:smalltalk$ ./pharo -mmap 1792m Pharo.image memtest.st 1280 1048576

memtest.st
uptime � � � � � � � � �0h0m0s
memory � � � � � � � � �25,076,708 bytes
� � � � old � � � � � � � � � � 19,213,592 bytes (76.60000000000001%)
� � � � young � � � � � 5,384 bytes (0.0%)
� � � � used � � � � � �19,218,976 bytes (76.60000000000001%)
� � � � free � � � � � �5,857,732 bytes (23.400000000000002%)
GCs � � � � � � � � � � � � � � 12 (12ms between GCs)
� � � � full � � � � � � � � � �2 totalling 55ms (37.9% uptime), avg 27.5ms
� � � � incr � � � � � �10 totalling 6ms (4.1000000000000005% uptime), avg 0.6000000000000001ms
� � � � tenures � � � � 0

allocating: 1280 times 1048576 bytes
allocated: 1.34 GB
time to run 0:00:00:35.258
3 times GC
time to run 0:00:00:00.37
uptime � � � � � � � � �0h0m35s
memory � � � � � � � � �-783,340,292 bytes
� � � � old � � � � � � � � � � -786,061,544 bytes (100.30000000000001%)
� � � � young � � � � � 7,460 bytes (0.0%)
� � � � used � � � � � �-786,054,084 bytes (100.30000000000001%)
� � � � free � � � � � �2,713,792 bytes (-0.30000000000000004%)
GCs � � � � � � � � � � � � � � 2,572 (14ms between GCs)
� � � � full � � � � � � � � � �1281 totalling 35,444ms (99.10000000000001% uptime), avg 27.700000000000003ms
� � � � incr � � � � � �1291 totalling 93ms (0.30000000000000004% uptime), avg 0.1ms
� � � � tenures � � � � 0
Since last view 2,560 (14ms between GCs)
� � � � uptime � � � � �35.6s
� � � � full � � � � � � � � � �1279 totalling 35,389ms (99.30000000000001% uptime), avg 27.700000000000003ms
� � � � incr � � � � � �1281 totalling 87ms (0.2% uptime), avg 0.1ms
� � � � tenures � � � � 0


The allocation takes a lot longer, but the GC times are stable.

I suspect that negative reporting has to do with SmallInteger limitations, but the question is if it is only a cosmetic problem or not.

Again, I am not complaining, just exploring/wondering.


Sven